Improvement to performance of solid-rotor-ringed line-start axial-flux permanent-magnet motor

Progress in Electromagnetics Research

Volumn 124, Issue , 2012, Pages 383-404

  Mahmoudi, Amin ^a   Kahourzade, S ^a   Rahim, N A ^a   Ping, H W ^a  

^a UNIVERSITY OF MALAYA   (Malaysia)

Author keywords

[No Author keywords available]

Indexed keywords

FINITE ELEMENT METHOD; LARGE SCALE SYSTEMS; MAGNETS; PERMANENT MAGNETS;

AXIAL FLUX PERMANENT MAGNET MOTOR; COMPOSITE ROTORS; DESIGN AND ANALYSIS; DESIGN PARAMETERS; NOVEL STRUCTURES; SYNCHRONIZATION CAPABILITY; TIME-STEPPING FINITE ELEMENTS; TRANSIENT PERFORMANCE;

ELECTRIC MOTORS;

EID: 84856985312     PISSN: 10704698     EISSN: 15598985     Source Type: Journal    
DOI: 10.2528/PIER11122501     Document Type: Article

References (36)

1. Fei, W., P. Luk, J. Ma, J. X. Shen, and G. Yang, "A high-performance line-start permanent magnet synchronous motor amended from a small industrial three-phase induction motor," IEEE Transactions on Magnetics, Vol. 45, No. 10, 4724-4727, Oct. 2009.
2. Knight, A. M. and C. I. McClay, "The design of high-e±ciency line-start motors," IEEE Transactions on Industry Applications, Vol. 36, No. 36, 1555-1562, Nov.-Dec. 2000.
3. Aliabad, A. D., M. Mirsalim, and N. F. Ershad, "Line-start permanent-magnet motors: significant improvements in starting torque, synchronization, and steady-state performance, " IEEE Transactions on Magnetics, Vol. 46, No. 12, 4066-4072, Dec. 2010.
4. Cavagnino, A., M. Lazzari, F. Profumo, and A. Tenconi, "A comparison between the axial flux and the radial flux structures for PM synchronous motors, " IEEE Transaction on Industrial Applications, Vol. 38, No. 6, 1517-1524, Nov.-Dec. 2002.
5. Mahmoudi, A., N. A. Rahim, and W. P. Hew, "Analytical method for determining axial-flux permanent-magnet machine sensitivity to design variables, " International Review of Electrical Engineering (IREE), Vol. 5, No. 5, 2039-2048, Sep.-Oct. 2010.
6. Mahmoudi, A., N. A. Rahim, and W. P. Hew, "An analytical com-plementary fea tool for optimizing of axial-flux permanent-magnet machines", International Journal of Applied Electromagnetics Ma-chines (IJEAM), Vol. 37, No. 1, 19-34, Sept. 2011.
7. Mahmoudi, A., N. A. Rahim, and H. W. Ping, "Genetic algorithm and finite element analysis for optimum design of slotted torus axial-flux permanent-magnet brushless DC motor," Progress In Electromagnetics Research B, Vol. 33, 383-407, 2011.
8. Rahim, N. A., W. P. Hew, and A. Mahmoudi, "Axial-flux permanent-magnet brushless DC traction motor for direct drive of electric vehicle, " International Review of Electrical Engineering (IREE), Vol. 6, No. 2, 760-769, Apr. 2011.
9. Ding, T., N. Takorabet, F. M. Sargos, and X. Wang, "Design and analysis of different line-start pm synchronous motors for oil-pump applications, " IEEE Transactions on Magnetics, Vol. 45, No. 3, 1816-1819, Mar. 2009.
10. Honsinger, V. B., "Permanent magnet machines: Asychronous operation, " IEEE Transactions on Power Apparatus and Systems, Vol. 99, No. 4, 1503-1509, Jul. 1980.
11. Kim, B. T. and B. I. Kwon, "Influence of space harmonics on starting performance of a single-phase line start permanent- magnet motor, " IEEE Transactions on Magnetics, Vol. 44, No. 22, 4668-4672, Dec. 2008.
12. Marcic, T., B. Stumberger, G. Stumberger, M. Hadziselimovic, P. Virtic, and D. Dolinar, Line-starting three-and single-phase interior permanent magnet synchronous motors -direct comparison to induction motors, IEEE Transactions on Magnetics, Vol. 44, No. 11, 4413-4416, Nov. 2008.
13. Miller, T. J. E., "Synchronization of line-start permanent-magnet AC motors, " IEEE Transactions on Power Apparatus and Systems, Vol. 103, No. 7, 1822-1828, Jul. 1984.
14. Peralta-Sánchez, E. and A. Smith, "Line-start permanent-magnet machines using a canned rotor," IEEE Transactions on Industry Applications, Vol. 45, No. 3, 903-910, May-Jun. 2009.
15. Rahman, M. A. and T. A. Little, "Dynamic performance analysis of permanent magnet synchronous motors magnet synchronous motors," IEEE Transactions on Power Apparatus and Systems, Vol. 103, No. 6, 1277-1282, Jun. 1984.
16. Rahman, M. A., A. M. Osheiba, and M. A. Choudhury, "Run-up response of polyphase permanent magnet synchronous motors," Electric Machines and Power Systems, Vol. 9, No. 4-5, 347-356, 1984.
17. Rahman, M. A., A. M. Osheiba, and T. S. Radwan, "Synchroniza- tion process of line-start permanent magnet synchronous motors," Electric Machine and Power Systems, Vol. 25, No. 6, 577-592, 1997.
18. Sarma, M., "Current-density distribution in solid-rotor induction motor," IEEE Transactions on Magnetics, Vol. 15, No. 6, 1473-1475, Nov. 1979.
19. Sarma, M. S. and G. R. Soni, Solid-rotor and composite-rotor induction machines, IEEE Transactions on Aerospace and Electronic Systems, Vol. 8, No. 2, 147-155, Mar. 1972.
20. Wilson, J. C., E. A. Erdelyi, and R. E. Hopkins, Aerospace composite-rotor induction motors, IEEE Transactions on Aerospace, Vol. 3, No. 2, 18-23, Jun. 1965.
21. Mahmoudi, A., N. A. Rahim, and W. P. Hew, Axial-flux permanent-magnet machine modeling, design, simulation, and analysis, Scientific Research and Essay (SRE), Vol. 6, No. 12, 2525-2549, Jun. 2011.
22. Mahmoudi, A., N. A. Rahim, and W. P. Hew, TORUS and AFIR axial-flux permanent-magnet machines: A comparison via finite Element Analysis, International Review on Modelling and Simulations (IREMOS), Vol. 4, No. 2, 624-631, Apr. 2011.
23. MÄuller, G., K. Vogt, and B. Ponick, Berechnung Elektrischer Maschinen, Wiley-VCH, Weinheim, 2008.
24. Vogt, K. and G. Muller, Elektrische Maschinen Berechnung Rotierender Elektrischer Maschinen, VebVerlagTechnik, Berlin, 1988.
25. Richter, R. and R. BrÄuderlink, ElektrischeMaschinen: Die Induktionsmachinen, Vol. 4, BirkhÄauserVerlag, Basel, 1954.
26. Bianchi, N., Electrical Machine Analysis using Finite Element, Taylor & Francis, CRC Press, 2005.
27. Mahmoudi, A., N. A. Rahim, and W. P. Hew, Axial-flux permanent-magnet motor design for electric vehicle direct drive using sizing equation and finite element analysis, Progress In Electromagnetics Research, Vol. 122, 467-496, 2012.
28. Zhao, W., M. Cheng, R. Cao, and J. Ji, "Experimental comparison of remedial single-channel operations for redundant flux-switching permanent-magnet motor drive, Progress In Electromagnetics Research, Vol. 123, 189-204, 2012.
29. Jian, L., G. Xu, G. Yu, J. Song, J. Liang, and M. Chang, "Electro-magnetic design and analysis of a novel magnetic-gear-integrated wind power generator using time-stepping finite element method, Progress In Electromagnetics Research, Vol. 113, 351-367, 2011.
30. Touati, S., R. Ibtiouen, O. Touhami, and A. Djerdir, "Experimental investigation and optimization of permanent magnet motor based on coupling boundary element method with permeances network," Progress In Electromagnetics Research, Vol. 111, 71-90, 2011.
31. Torkaman, H. and E. Afjei, "FEM analysis of angular misalignment fault in srm magnetostatic characteristics," Progress In Electromagnetics Research, Vol. 104, 31-48, 2010.
32. Torkaman, H. and E. Afjei, "Comparison of two types of dual layer generator in field assisted mode utilizing 3D-FEM and experimental verification, Progress In Electromagnetics Research B, Vol. 23, 293-309, 2010.
33. Vaseghi, B., N. Takorabet, and F. Meibody-Tabar, "Transient finite element analysis of induction machines with stator winding turn fault," Progress In Electromagnetics Research, Vol. 95, 1-18, 2009.
34. Opera Version 14.0 User Guide, Vector Fields, 2011, http://www.cobham.com.
35. Ong, C. M., Dynamic Simulation of Electric Machinery: Using MATLAB/Simulink, Prentice Hall PTR, New Jersey, 1998.
36. HassanpourIsfahani, A. and S. Vaez-Zadeh, "Line start permanent magnet synchronous motors: Challenges and opportunities, Energy, Vol. 34, No. 11, 1755-1763, Nov. 2009.