A novel axial flux permanent-magnet machine for flywheel energy storage system: Design and analysis

IEEE Transactions on Industrial Electronics

Volumn 58, Issue 9, 2011, Pages 3784-3794

  Nguyen, Trong Duy ^a   Tseng, King Jet ^a   Zhang, Shao ^a   Nguyen, Hoan Thong ^a  

^a NANYANG TECHNOLOGICAL UNIVERSITY   (Singapore)

Author keywords

3 D finite element method (3 D FEM); Axial flux permanent magnet (AFPM) machine; axial force control; flywheel energy storage system (FESS)

Indexed keywords

3-D FINITE ELEMENT METHOD; 3-D FINITE ELEMENT METHOD (3-D FEM); AXIAL FLUX; AXIAL FORCES; BEARING STRESS; COGGING TORQUE; DESIGN AND ANALYSIS; DESIGN AND CONTROL; ELECTROMAGNETIC TORQUES; FLUX DISTRIBUTIONS; FLYWHEEL ENERGY STORAGE SYSTEM; FLYWHEEL ENERGY STORAGE SYSTEM (FESS); PERMANENT-MAGNET MACHINE; SKEW ANGLES;

AXIAL FLOW; BEARINGS (STRUCTURAL); DESIGN; ENERGY STORAGE; FLYWHEEL PROPULSION; FLYWHEELS; PERMANENT MAGNETS; THREE DIMENSIONAL; TORQUE; WHEELS;

FINITE ELEMENT METHOD;

EID: 80051760742     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2010.2089939     Document Type: Article

References (26)

1. R. Hebner, J. Beno, A. Walls, and M. J. Riezenman, "Flywheel batteries come around again", IEEE Spectr., vol. 39, no. 4, pp. 46-51, Apr. 2002.
2. R. Cardenas, R. Pena, M. Perez, J. Clare, G. Asher, and P. Wheeler, "Power smoothing using a flywheel driven by a switched reluctance machine", IEEE Trans. Ind. Electron., vol. 53, no. 4, pp. 1086-1093, Jun. 2006. (Pubitemid 44263719)
3. X.-D. Sun, K.-H. Koh, B.-G. Yu, and M. Matsui, "Fuzzy-logic-based V/f control of an induction motor for a dc grid power-leveling system using flywheel energy storage equipment", IEEE Trans. Ind. Electron., vol. 56, no. 8, pp. 3161-3168, Aug. 2009.
4. B. Wang and G. Venkataramanan, "Dynamic voltage restorer utilizing a matrix converter and flywheel energy storage", IEEE Trans. Ind. Appl., vol. 45, no. 1, pp. 222-231, Jan./Feb. 2009.
5. H. Mitsuda, A. Inoue, B. Nakaya, and M. Komori, "Improvement of energy storage flywheel system with SMB and PMB and its performances", IEEE Trans. Appl. Supercond., vol. 19, no. 3, pp. 2091-2094, Jun. 2009.
6. F. N. Werfel, U. Floegel-Delor, T. Riedel, R. Rothfeld, D. Wippich, B. Goebel, G. Reiner, and N. Wehlau, "Towards high-capacity HTS fly-wheel systems", IEEE Trans. Appl. Supercond., vol. 20, no. 4, pp. 2272-2275, Aug. 2010.
7. L. Bakay, M. Dubois, P. Viarouge, and J. Ruel, "Losses in hybrid and active magnetic bearings applied to Long Term Flywheel Energy Storage", in Proc. 5th IET Int. Conf. PEMD, Brighton, U. K., Apr. 2010, pp. 1-6.
8. K. Sitapati and R. Krishnan, "Performance comparisons of radial and axial field, permanent-magnet, brushless machines", IEEE Trans. Ind. Appl., vol. 37, no. 5, pp. 1219-1226, Sep./Oct. 2001. (Pubitemid 32992788)
9. A. Cavagnino, M. Lazzari, F. Profumo, and A. Tenconi, "A comparison between the axial flux and the radial flux structures for PM synchronous motors", IEEE Trans. Ind. Appl., vol. 38, no. 6, pp. 1517-1524, Nov./Dec. 2002.
10. M. Aydin, S. Huang, and T. A. Lipo, "Torque quality and comparison of internal and external rotor axial flux surface-magnet disc machines", IEEE Trans. Ind. Electron., vol. 53, no. 3, pp. 822-830, Jun. 2006. (Pubitemid 43834601)
11. M. Aydin, S. Huang, and T. A. Lipo, "Design, analysis and control of a hybrid field controlled axial flux permanent magnet motor", IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 78-87, Jan. 2010.
12. C.-T. Liu, T.-S. Chiang, J. F. D. Zamora, and S.-C. Lin, "Field-oriented control evaluations of a single-sided permanent magnet axial-flux motor for an electric vehicle", IEEE Trans. Magn., vol. 39, no. 5, pp. 3280-3282, Sep. 2003.
13. F. Marignetti, V. Delli Colli, and Y. Coia, "Design of axial flux PM synchronous machines through 3-D coupled electromagnetic thermal and fluid-dynamical finite-element analysis", IEEE Trans. Ind. Electron., vol. 55, no. 10, pp. 3591-3601, Oct. 2008.
14. T.-S. Kwon, S.-K. Sul, L. Alberti, and N. Bianchi, "Design and control of an axial-flux machine for a wide flux-weakening operation region", IEEE Trans. Ind. Appl., vol. 45, no. 4, pp. 1258-1266, Jul./Aug. 2009.
15. J. H. Choi, J. H. Kim, D. H. Kim, and Y. S. Baek, "Design and parametric analysis of axial flux PM motors with minimized cogging torque", IEEE Trans. Magn., vol. 45, no. 6, pp. 2855-2858, Jun. 2009.
16. D. A. Gonzalez-Lopez, J. A. Tapia, R. Wallace, and A. Valenzuela, "Design and test of an axial flux permanent-magnet machine with field control capability", IEEE Trans. Magn., vol. 44, no. 9, pp. 2168-2173, Sep. 2008.
17. T. D. Nguyen, K. J. Tseng, S. Zhang, and H. T. Nguyen, "On the modeling and control of a novel flywheel energy storage system", in Proc. IEEE Int. Symp. Ind. Electron., Bari, Italy, Jul. 2010, pp. 1395-1401.
18. A. K. Sawhney, A Course in Electrical Machine Design. New Delhi, India: Dhanpat Rai & Sons, 1987.
19. M. Nosaka, S. Takada, M. Yoshida, M. Kikuchi, T. Sudo, and S. Nakamura, "Improvement of durability of hybrid ceramic ball bearings in liquid hydrogen at 3 million DN (120 000 rpm)", Tribol. Online, vol. 5, no. 1, pp. 60-70, Feb. 2010.
20. Q. He, H. Liu, Y. Zhang, J. Ye, and Q. Niu, "The characteristics of hybrid ceramic ball bearing for high-speed spindle", in Proc. ICMA, 2009, pp. 2489-2494.
21. S. R. Holm, "Modelling and optimization of a permanent magnet machine in a flywheel", Ph. D. dissertation, Technische Universiteit Delft, Delft, The Netherlands, 2003.
22. S. Huang, J. Luo, F. Leonardi, and T. A. Lipo, "A general approach to sizing and power density equations for comparison of electrical machines", IEEE Trans. Ind. Appl., vol. 34, no. 1, pp. 92-97, Jan./Feb. 1998. (Pubitemid 128739700)
23. J. F. Gieras, R.-J. Wang, and M. J. Kamper, Axial Flux Permanent Magnet Brushless Machines. Norwell, MA: Kluwer, 2005.
24. Maxwell 3D Electromagnetic and Electromechanical Analysis-User's Guide, Ansoft Corporation, Pittsburgh, PA, Feb. 2009.
25. Z. Q. Zhu and D. Howe, "Influence of design parameters on cogging torque in permanent magnet machines", IEEE Trans. Energy Convers., vol. 15, no. 4, pp. 407-412, Dec. 2000. (Pubitemid 32252034)
26. A. E. Fitzgerald, C. Kingsley, Jr., and S. D. Umans, Electric Machinery, 6th ed. New York, McGraw-Hill Higher Education, 2003.