Paint and Coatings Technology for the Control of Marine Fouling

Biofouling

Volumn , Issue , 2010, Pages 185-206

  Finnie, Alistair A ^a   Williams, David N ^a  

^a International Paint Ltd   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

COATINGS TECHNOLOGY; MARINE FOULING;

EID: 84887257443     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781444315462.ch13     Document Type: Chapter

References (111)

1. WHOI (1952) Marine Fouling and its Prevention. Woods Hole Oceanographic Institute, United States Naval Institute, Annapolis.
2. Plutarch (1870) Plutarch's Morals (translated from the Greek by several hands corrected and revised by William W. Goodwin with an introduction by Ralph Waldo Emerson). Little, Brown & Co, Boston.
3. Holm, E.R., Schultz, M.P., Haslbeck, E.G., Talbott, W.J. & Field, A.J. (2004) Evaluation of hydrodynamic drag on experimental fouling-release surfaces, using rotating discs. Biofouling, 20, 219-226.
4. Lethwaite, J.C., Molland, A.F. & Thomas, K.W. (1985) An investigation into the variation of ship skin frictional resistance with fouling. Transactions of the Royal Institute of Naval Architects, 127, 269-284.
5. Schultz, M.P. (2004) Frictional resistance of antifouling coating systems. Journal of Fluids Engineering, 126, 1039-1047.
6. Schultz, M.P. (2007) Effects of coating roughness and biofouling on ship resistance and powering. Biofouling, 23, 331-341.
7. Steffy, J.R. (1985) The Kyrenia ship: an interim report on its hull construction. American Journal Archaeology, 89, 71-101.
8. Bertram, J. (2000) Past, present and prospects of antifouling. In: 32nd WEGEMTSchool on Marine Coatings, pp. 87-97. WEGEMT, New York.
9. Anderson, C. (2004) Coatings, antifoulings. In: Kirk-Othmer Encyclopedia of Chemical Technology, Vol. 7, 5th edn (ed. R.E. Kirk-Othmer), pp. 150-167. Wiley-Interscience, New Jersey.
10. Almeida, E., Diamantino, T.C. & de Sousa, O. (2007) Marine paints: the particular case of antifouling paints. Progress in Organic Coatings, 59, 2-20.
11. European Union (1998) European Directive 98/8/EC of the European Parliament and of the Council of 16 February 1998 concerning the placing of biocidal products on the market. Official Journal of the European Union, L123/1.
12. Lewis, J.A. (1998) Marine biofouling and its prevention on underwater surfaces. Materials Forum, 22, 41-61.
13. Banfield, T.A. (1980) Marine finishes: part 2. Journal of the Oil and Colour Chemists Association, 69, 93-100.
14. de Wolf, P. & Londen, A.M. (1966) Anti-fouling compositions. Nature, 209, 272-274.
15. Finnie, A.A. (2006) Improved estimates of environmental copper release rates from antifouling products. Biofouling, 22, 279-291.
16. Sharma, V.K. & Millero, F.J. (1988) Oxidation of copper (I) in seawater. Environmental Science and Technology, 22, 768-771.
17. Yebra, D.M., Kiil, S. & Dam-Johansen, K. (2004) Antifouling technology-past, present and future steps towards efficient and environmentally friendly antifouling coatings. Progress in Organic Coatings, 50, 75-104.
18. Callow, M.E. (1999) The status and future of biocides in marine biofouling prevention. Recent Advances in Marine Biofouling Prevention, 3, 109-126.
19. European Commission (2007) Commission regulation (EC) No. 1451/2007 of 4 December 2007 on the second phase of the 10-year work programme referred to in Article 16(2) of Directive 98/8/EC of the European Parliament and of the Council concerning the placing of biocidal products on the market. Official Journal of the European Union, L325/3.
20. Eliasson, J. (2003) Economics of coatings/corrosion protection of ships - selecting the correct type of anticorrosion protection for underwater applications on new buildings. In: Lloyd's List Event Conference: Prevention and Management of Marine Corrosion. 2-3 April 2003. Lloyds, London.
21. JPMA (2008) http://www.toryo.or.jp/eng/index.html, Japan Paint Manufacturers Association, Japan. Accessed 5 July 2009.
22. Thomas, K.V., Blake, S.J. & Waldock, M.J. (2000) Antifouling paint booster biocide contamination in UK marine sediments. Marine Pollution Bulletin, 40, 739-745.
23. LME (2008) http://www.lme.co.uk/coppemgraphs.asp, London Metal Exchange, London. Accessed 5 July 2009.
24. Caprari, J.J., Slutzky, O., Pessi, P.L. & Rascio, V. (1986) A study of the leaching of cuprous oxide from vinyl antifouling paints. Progress in Organic Coatings, 13, 431-444.
25. Conner, A.H. (1989) Chemistry of other components in naval stores. In: Naval Stores (eds D.F. Zinkel & J. Russel), pp. 441-475. Pulp Chemicals Association, New York.
26. Anderson, C.D. (1993) Self-Polishing Antifoulings: A Scientific Perspective. Ship Repair & Conversion, London.
27. Yebra, D.M., Kiil, S., Dam-Johansen, K. & Weinell, C.E. (2006) Mathematical modelling of tin-free chemically-active antifouling paint behaviour. AIChE Journal, 52, 1926-1940.
28. Kiil, S., Weinell, C.E., Pederson, M.S. & Dam-Johansen, K. (2001) Analysis of self-polishing antifouling paints using rotary experiments and mathematical modeling. Industrial and Engineering Chemistry Research, 40, 3906-3920.
29. Kiil, S., Weinell, C.E., Pederson, M.S. & Dam-Johansen, K. (2002) Mathematical modelling of a self-polishing antifouling paint exposed to seawater: a parameter study. Transactions of the Institution of Chemical Engineers, Part A, 80, 45-52.
30. Milne, A. (1991) Ablation and after: the law and the profits. In: Polymers in a Marine Environment: The Institute of Marine Engineers Third International Conference. Marine Management Ltd, London.
31. Anderson, C. (1993) Self-polishing antifoulings: a scientific perspective. In: Ship Repair and Conversion 93, BML Business Meetings. BML Business Meetings, Rickmansworth.
32. Anderson, C.D. & Hunter, J.E. (2001) TBT-free antifouling coating technologies and performance - a technical review. In: Pollution Prevention from Ships and Shipyards Symposium: Oceanology International 2001, pp. 81-86. ATRP Corporation, Miami.
33. Champ, M.A. (2000) A review of organotin regulatory strategies, pending actions, related costs and benefits. The Science of the Total Environment, 258, 21-71.
34. IMO (2001) International Convention on the Control of Harmful Anti-Fouling Systems on Ships. International Maritime Organisation, London.
35. Ohsugi, H.Y., Matsuda, M., Eguchi, Y. & Ishikura, S. (1989) Antifouling behaviour of copper- containing polymer. In: Thirteenth International Conference on Organic Coatings Science and Technology 1989, pp. 185-191. Technomic Publishing Co., Lancaster, PA.
36. Shilton, C. (1997) Mechanism of action of tin-free antifouling paints: Intersmooth 360 Ecoloflex. Pitture e Vernici, 73 (9), 10-18.
37. Anon (2004) Antifouling Product and Technology Guide. International Marine Coatings, Felling, UK.
38. Silverman, G.S. & Aubart, M. (2006) Polymer binders represent a major breakthrough for selfpolishing marine antifoulant paints. Paint & Coatings Industry, 2006, 40-46.
39. Fox, J. & Finnie, A.A. (2001) Antifouling Paint. Patent EP1144518-A1, Akzo Nobel NV.
40. Rittschof, D. (2000) Natural product antifoulants: one perspective on the challenges related to coatings development. Biofouling, 15, 119-127.
41. Clare, A.S. (1993) Towards nontoxic antifouling. Journal of Marine Biotechnology, 6, 3-6.
42. De Nys, R., Steinberg, P.D., Willemsen, P., Dworjanyn, S.A., Gabelish, C.L. & King, R.J. (1995) Broad spectrum effects of secondary metabolites from the red alga Delisea pulchra in antifouling assays. Biofouling, 8, 259-271.
43. Todd, J.S., Zimmerman, R.C., Crews, P. & Alberte, R. (1993) The antifouling activity of natural and synthetic phenolic acid sulphate esters. Phytochemistry, 34, 401-444.
44. Alberte, R.S. & Zimmerman, R.C. (1999) Antifouling Agents. Patent WO0016623-A1, Phycogen Inc.
45. Barrios, C.A., Xu, Q., Cutright, T. & Newby, B.Z. (2004) Zosteric acid: an effective antifoulant for reducing bacterial attachment on coatings. Polymer Preprints, 45, 227-228.
46. Olsen, S.M., Pedersen, L.T., Laursen, M.H., Kiil, S. & Dam-Johansen, K. (2007) Enzyme-based antifouling coatings: a review. Biofouling, 23, 369-383.
47. Bonaventura, C., Bonaventura, J. & Hooper, I.R. (1991) Antifouling Methods using Enzyme Coatings. Patent US5998200, Duke University.
48. Candries, M. & Anderson, C.D. (2003) Estimating the impact of new-generation antifoulings on ship performance: the presence of slime. Journal ofMarine Engineering and Technology (Part A), 2003 (2), 13-22.
49. Anon (1998) Intersleek 700: First Biocide-Free Fouling Control System for Scheduled Shipping. Propeller Direct, International Paint Ltd, Felling, UK.
50. Fourche, G. (1995) An overview of the basic aspects of polymer adhesion 1: fundamentals. Polymer Engineering and Science, 35, 957-967.
51. Baier, R.E. (1973) Influence of the initial surface condition of materials on bioadhesion. In: Proceedings of the 3rd International Congress on Marine Corrosion and Fouling 1973 (eds R.F. Acker, B.F. Brown, J.R. DePalma & W.P. Iverson), pp. 633-639. Northwestern University Press, Evanston.
52. Chaudhury, M.K., Newby, B.Z. & Brown, H.R. (1995) Macroscopic evidence of the effect of interfacial slippage on adhesion. Science, 269, 1407-1409.
53. Brady, R.F. (2000) Clean hulls without poisons: devising and testing nontoxic marine coatings. Journal of Coatings Technology, 72, 45-56.
54. Kohl, J.G. & Singer, I.L. (1999) Pull-off behaviour of epoxy bonded to silicone duplex coatings. Progress in Organic Coatings, 36, 15-20.
55. Swain, G. (1999) Redefining antifouling coating. Paint Coat Europe, July, 18-25.
56. r 900 Fluoropolymer Foul Release Coating. International Paint Ltd., London.
57. Field, D.E. (1976) Fluorinated polyepoxy and polyurethane coatings. Journal of Coatings Technology, 48, 43-47.
58. Brady, R.F. & Aronson, C.L. (2003) Elastomeric fluorinated polyurethane coatings for nontoxic fouling control. Biofouling, 19, 59-62.
59. Brady, R.F. & Bonafede, S.J. (1998) Compositional effects on the fouling resistance of fluoroethane coatings. Surface Coatings International, 4, 181-185.
60. Brady, R.F., Bonafede, S.J. & Schmidt, D.L. (1999) Self-assembled water-borne fluropolymer coatings for marine fouling resistance. Surface Coatings International, 12, 582-585.
61. Youngblood, J., Andruzzi, L., Ober, C.K., et al. (2003) Coatings based on side-chain ether-linked poly(ethylene glycol) and fluorocarbon polymers for the control of marine biofouling. Biofouling, 19, 91-98.
62. Gudipati, C.S., Finlay, J.A., Callow, J.A., Callow, M.E. & Wooley, K.L. (2005) The antifouling and foul-release performance of hyperbranched fluoropolymer (HBFP) - poly(ethylene glycol) (PEG) composite coatings evaluated by adsorption of biomacromolecules and the green fouling alga Ulva. Langmuir, 21, 3044-3053.
63. Johnston, E., Bullock, S.U.J., Gatenholm, P. & Wynne, K.J. (1999) Networks from dihydrox- ypoly(dimethylsiloxane) and (tridecafluoro-1, 1, 2, 2-tetrahydrooctyl)-triethoxysilane: surface microstructures and surface characterisation. Macromolecules, 32, 8173-8182.
64. Tsibouklis, J., Peters, V., Smith, J.R., Nevell, T.G. & Thorpe, A.A. (2000) Poly(methylpropenoxyfluoroalkylsiloxane)s: a class of fluoropolymers capable of inhibiting bacterial adhesion onto surfaces. Journal of Fluoropolymer Chemistry, 104, 37-45.
65. Mera, A., Fox, R.B., Johnston, E., Bullock, S. & Wynne, K. (2001) Toward minimally adhesive surfaces utilizing siloxanes. In: Conference: Silicones in Coatings II. Paper 22. Paint Research Association, Hampton, UK.
66. Dahling, M., Lien, E.M., Orsini, L.M., Galli, G. & Chiellini, E. (2007) Fouling Release Composition. Patent WO 2007/102741 A1, Jotun AS.
67. Williams, D. & Lines, R. (2001) Antifouling Coating Composition comprising a fluorinated Resin. Patent A1287056B1, International Coatings Ltd, Ausimont SPA.
68. Yarbrough, J.C., Rolland, J.P., DeSimone, J.M., Callow, M.E., Finlay, J.A. & Callow, J.A. (2006) Contact angle analysis, surface dynamics, and biofouling characteristics of cross-linkable, random perfluoropolyether-based Graft terpolymers. Macromolecules, 39, 2521-2528.
69. Pullin, R.A., Nevell, T.G. & Tsibouklis, J. (1999) Surface energy characteristics and marine antifouling performance of poly(1H, 1H, 2H, 2H perfluorodecanoyldiitaconate) film structures. Material Letters, 39, 142-148.
70. Brady, R.F. & Griffith, J.R. (1987) Non-toxic alternatives to antifouling paints. Journal of Coating Technology, 59, 113-119.
71. Vincent, H.L. & Bausch, G.G. (1997) Silicon fouling release coatings. Naval Research Reviews, 4, 39-45.
72. Robbart, E. (1955) Ship's Hull coated with Anti-Fouling Silicone Resin and Method of Coating. Patent US2986474A.
73. Milne, A. & Callow, M. (1985) Non-biocidal antifouling processes. In: Polymers in the Marine Environment (ed. R. Smith), pp. 229-233. The Institute of Marine Engineer, London.
74. Milne, A. (1975) Coated Marine Surfaces. Patent GB1470465A, International Paint Ltd.
75. Burnell, T., Carpenter, J., Truby, K., Serth-Guzzo, J., Stein, J. & Wiebe, D. (2000) Advances in non-toxic silicone biofouling release coatings. ASC Symposium, 729, 180-193.
76. Truby, K., Darkangelo Wood, C., Stein, J., etal. (2000) Evaluation of the performance enhancement of silicone biofouling-release coatings by oil incorporation. Biofouling, 15, 141-150.
77. Webster, D.C., Chisholm, B.J. & Stafslien, S.J. (2007) Mini review: combinatorial approaches for the design of novel coating systems. Biofouling, 23, 179-192.
78. Groenlund Scholten, M., Martin, A., Weinrich Thorlaksen, P., Oxfeldt Andresen, A. & Nielsen, J. (2003) A Tie-Coat Composition Comprising at Least Two Types of Functional Polysiloxane Compounds and a Method for Using the Same for Establishing a Coating on a Substrate. Patent EP1670866B1, Hempel A/S.
79. Hamilton, T., Green, G.E. & Williams, D.N. (1998) Fouling Inhibition. Patent EP 1042413 B1, Akzo Nobel Coatings International BV.
80. Anon (1999) Intersleek 700: First Biocide-Free Fouling System for Scheduled Shipping. International Paint Ltd, Felling, UK.
81. Watermann, B., Berger, H.D., Sönnichsen, H. & Willemsen, P. (1997) Performance and effectiveness of non-stick coatings in seawater. Biofouling, 11, 101-118.
82. Anon (2007) Intersleek 900: Fluoropolymer Foul Release Coating for all Vessel Types. International Paint Ltd, Felling, UK.
83. Candries, M., Altar, M. & Anderson, C.D. (2000) Considering the use of alternative antifoulings: the advantages of foul-release systems. In: Conference Proceedings ENSUS 2000, pp. 88-95. Departments of Marine Technology and Marine Sciences, Newcastle University, UK.
84. Westergaard, C.H. (2007) Comparison of fouling Control Coating Performance to Ship Propulsion Efficiency. Hempel A/S.
85. Walker, I. (1998) Non-toxic fouling control systems. Pitture e Vernici Europe, 74, 17-22.
86. Willemsen, P. (2005) Biofouling in European aquaculture: is there an easy solution? European Aquaculture Society Special Publication, 35, 82-87.
87. Swain, G.W. (1998) Biofouling control - a critical component of drag reduction. In: Proceedings of the International Symposium on Seawater Drag Reduction, 22-24 July (ed. J.C.S. Meng), pp. 155-161. Newport, USA.
88. Genzer, J. & Efimenko, K. (2006) Recent developments in superhydrophobic surfaces and their relevance to marine fouling: a review. Biofouling, 22, 339-360.
89. Gatenholm, P., Holmstrom, C., Maki, C. & Kjelleberg, S. (1995) Toward biological antifouling surface coatings: marine bacteria immobilized in hydrogel inhibit barnacle larvae. Biofouling, 8, 293-301.
90. Cowling, M.J., Hodgkiess, T., Parr, A.C.S., Smith, M.J. & Marrs, S.J. (2000) An alternative approach to antifouling based on analogues of natural processes. The Science of the Total Environment, 258, 129-137.
91. Rasmussen, K., Willemsen, P.R. & Ostgaard, K. (2002) Barnacle settlement on hydrogels. Biofouling, 18, 177-191.
92. Marmur, A. (2006) Super-hydrophobicity fundamentals: implications to biofouling prevention. Biofouling, 22 (2), 1-9.
93. Neinhuis, C. & Barthlott, W. (1997) Characterization and distribution of water-repellent, selfcleaning plant surfaces. Annals of Botany, 79, 667-677.
94. Marmur, A. (2006) Soft contact: measurement and interpretation of contact angles. Soft Matter, 2, 12-17.
95. Callies, M. & Quere, D. (2005) On water repellency. Soft Matter, 1, 55-61.
96. Scardino, A.J., Harvey, E. & De Nys, R. (2006) Testing attachment point theory: diatom attachment on microtextured polyimide biomimics. Biofouling, 22, 55-60.
97. Cunliffe, D., De las Heras Alarcon, C., Peters, V., Smith, J.R. & Alexander, C. (2003) Thermoresponsive surface grafted poly(N-Isopropylacrylamide) copolymers: effect of phase transitions on protein and bacterial attachment. Langmuir, 19, 2888-2899.
98. Ista, L.K., Perez-Luna, V.H. & Lopez, G.P. (1999) Surface-grafted, environmentally sensitive polymers for biofilm release. Applied and Environmental Microbiology, 65, 1603-1609.
99. Nobuhiko, K., Tsuneo, A., Mizuno, T. & Norikazu, N. (1997) Prevention of Fouling and Beltlike Unit for Preventing Fouling for Ship or Immersion Structure. Patent JP11092315 A, Ishikawajima Harima Heavy Ind.
100. Corp, B. (1981) Multilayered Submersible Structure with Fouling Inhibiting Characteristic. Patent US7025013B1, Brunswick Corp.
101. Mitsuru, K.K. (1981) Antifouling agent for Aquatic Life. Patent JP63057503, Koryu Kogyo KK.
102. Aksel'band, A.M. (1960) Ultrasonic protection of ships from fouling. Transactions of the Oceanographic Commission, The Academy of Sciences, USSR, 13, 7-9.
103. Morley, C.O., Clarke, H.J., Bowe, H.J.M. & Arnold, M.H.M. (1958) The use of radioactivity against marine fouling. Journal of the Oil and Colour Chemists' Association, 41, 445-452.
104. Omae, I. (2003) General aspects of tin-free antifouling paints. Chemical Reviews, 103, 3431-3448.
105. Nakamatsu, S., Harada, H., Shinomiya, Y. & Omizu, T. (1978) An Electrolytic Cell for Electrolysis of Sea Water. Patent US4173525, Chlorine Eng Corp Ltd.
106. Anon (1997) Could underwater cleaning replace antifoulants? Marine Engineers' Review, February, 28-29.
107. Weber, M. (1997) Device for External Cleaning of Ships Hulls. Patent WO9741026.
108. Anon (2006) Contactless cleaning of underwater hulls. Marina PortZelande B.V.
109. Anon (2007) Antifoulings: The Legislative Position Key Points Summary. International Paint Ltd, Felling, UK.
110. Lewis, J.A. (2003) TBT antifouling paints are now banned! What are the alternatives and what of the future? Surface Coatings Australia, 40, 12-15.
111. AMBIO (2008) Advanced nanostructured Surfaces for the Control of Biofouling, FP6 European Project, Contract NMP4-CT-2005-011827. Available from http://www.ambio.bham.ac.uk. Accessed 5 July 2009.