As-Is 3D thermal modeling for existing building envelopes using a hybrid LIDAR system

Journal of Computing in Civil Engineering

Volumn 27, Issue 6, 2013, Pages 645-656

  Wang, Chao ^a   Cho, Yong K ^a   Gai, Mengmeng ^b  

^a Georgia Institute of Technology   (United States)

^b UNIVERSITY OF NEBRASKA LINCOLN   (United States)

Author keywords

3D modeling; Building energy; Decision support; IR camera; LIDAR; Point cloud

Indexed keywords

3-D MODELING; BUILDING ENERGY; DECISION SUPPORTS; IR CAMERA; POINT CLOUD;

DECISION SUPPORT SYSTEMS; ENERGY EFFICIENCY; ENVIRONMENTAL IMPACT; ENVIRONMENTAL MANAGEMENT; GEOMETRY; OFFICE BUILDINGS; OPTICAL RADAR; THERMOGRAPHY (TEMPERATURE MEASUREMENT);

THREE DIMENSIONAL;

EID: 84886554707     PISSN: 08873801     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)CP.1943-5487.0000273     Document Type: Conference Paper

References (35)

1. Alba, M. I., Barazzetti, L., Scaioni, M., Rosina, E., and, Previtali, M. (2011). " Mapping infrared data on terrestrial laser scanning 3D models of buildings." Remote Sens., 3 (9), 1847-1870. RSEND3 10.3390/rs3091847
2. Balaras, C., and, Argiriou, A. (2002). " Infrared thermography for building diagnostics." Energy Build., 34 (2), 171-183. ENEBDR 0378-7788 10.1016/S0378-7788(01)00105-0
3. Borrmann, D., et al. (2012 a). " The Project ThermalMapper-Thermal 3D mapping of indoor environments for saving energy." Proc., 10th Int. IFAC Symp. on Robot Control (SYROCO '12), IFAC, Laxenburg, Austria.
4. Borrmann, D., Afzal, H., Elseberg, J., and, Nüchter, A. (2012 b). " Mutual calibration for 3D thermal mapping." Proc., 10th Int. IFAC Symp. on Robot Control (SYROCO '12), IFAC, Laxenburg, Austria.
5. Borrmann, D., Elseberg, J., and, Nüchter, A. (2012 c). " Thermal 3D mapping of building facades." Proc., 8th Conf. on Intelligent Autonomous Systems (IAS '12), IEEE, New Brunswick, NJ.
6. Bouguet, J. (2010). " Camera calibration toolbox for Matlab." 〈 http://www.vision.caltech.edu/bouguetj/calib-doc/ ⌠(Jul. 9, 2010).
7. Cheok, G. (2005). " Proceedings of the 2nd NIST LADAR performance evaluation workshop-March 15-16, 2005." NISTIR 7266, National Institute of Standards and Technology, Gaithersburg, MD.
8. Cho, Y., and, Martinez, D. (2009). " Light-weight 3D LADAR system for construction robotic operations." 26th Int. Symp. on Automation and Robotics in Construction (ISARC), IAARC, Goyang-Si, Republic of Korea, 237-244.
9. Cho, Y., and, Wang, C. (2011). " 3D thermal modeling for existing buildings using hybrid LIDAR system." Proc., 2011 ASCE Int. Workshop on Computing in Civil Engineering, ASCE, Reston, VA, 552-559.
10. Cho, Y., Wang, C., Tang, P., and, Haas, C. (2012). " Target-focused local workspace modeling for construction automation applications." J. Comput. Civ. Eng., 26 (5), 661-670. JCCEE5 0887-3801 10.1061/(ASCE)CP.1943-5487. 0000166
11. Drennan, M. (2010). " An implementation of camera calibration algorithms." 〈 http://www.ces.clemson.edu/~stb/ece847/ projects/Camera-Calibration.pdf ⌠(May 25, 2011).
12. Energy Information Agency (EIA). (2009). " Annual energy review 2008." DOE/EIA-0384, U.S. Dept. of Energy, Washington, DC.
13. Golparvar-Fard, M., Peña-Mora, F., and, Savarese, S. (2009). " Application of D4AR-A 4-dimensional augmented reality model for automating construction progress monitoring data collection, processing and communication." J. ITCON, 14, 129-153.
14. Ham, Y., and, Golparvar-Fard, M. (2012). " Rapid 3D energy performance modeling of existing buildings using thermal and digital imagery." Proc., Construction Research Congress 2012, ASCE, Reston, VA, 991-1000.
15. Heikkila, J., and, Silven, O. (1997). " A four-step camera calibration procedure with implicit image correction." IEEE Computer Society Conf. on Computer Vision and Pattern Recognition, IEEE, New York, 1106-1112.
16. Hill, F. S., and, Kelley, S. M. (2006). " Rendering faces for visual realism." Computer graphics: Using OpenGL, Pearson Prentice Hall, Upper Saddle River, NJ.
17. Im, H., Gai, M., Wang, C., and, Cho, Y. (2012). " Hybrid approach to visualize building energy information model in geospatial application programs." Proc., Construction Research Congress 2012, ASCE, Reston, VA, 1262-1270.
18. Jung, Y., and, Joo, M. (2011). " Building information modelling (BIM) framework for practical implementation." J. Autom. Constr., 20 (2), 126-133. 0926-5805 10.1016/j.autcon.2010.09.010
19. Lagüela, S., Armesto, J., González-Jorge, H., Arias, P., and, Herráez, J. (2011 a). " Automation of thermographic 3D modelling through image fusion and image matching techniques." Proc., 28th Int. Symp. On Automation and Robotics in Construction (Part II), International Association for Automation and Robotics in Construction, Goyang-Si, Republic of Korea, 212-227.
20. Lagüela, S., Martínez, J., Armesto, J., and, Arias, P. (2011 b). " Energy efficiency studies through 3D laser scanning and thermographic technologies." Energy Build., 43 (6), 1216-1221. ENEBDR 0378-7788 10.1016/j.enbuild.2010.12.031
21. Leica Geosystems. (2012). " Leica ScanStation C10." 〈 http://hds.leica-geosystems.com/en/Leica-ScanStation-C10- 79411.htm ⌠(May 25, 2012).
22. Luhmann, T., Robson, S., Kyle, S., and, Harley, I. (2006). Close range photogrammetry-Principles, methods and application, Whittles Publishing, Caithnesss, UK.
23. Ma, L., Chen, Y., and, Moore, K. L. (2003). " A new analytical radial distortion model for camera calibration." IEEE Computer Society Conf. on Computer Vision and Pattern Recognition, IEEE, New York.
24. National Renewable Energy Laboratory (NREL). (2008). " Building America research benchmark definition." Technical Rep. NREL/TP-550-44816, Washington, DC.
25. Nüchter, A. (2012). " Project ThermalMapper." 〈 http://www.faculty.jacobs-university.de/anuechter/ thermalmapper.html ⌠(Nov. 1, 2011).
26. Ocaña, M. S., Guerrero, C. I., and, Requena, G. I. (2004). " Thermographic survey of two rural buildings in Spain." Energy Build., 36 (6), 515-523. ENEBDR 0378-7788 10.1016/j.enbuild.2003.12.012
27. Olson, D. L., and, Delen, D. (2008). Advanced data mining techniques, 1st Ed., Springer, Lincoln, NE, 138.
28. Rao, D. S. (2007). " Investigations on ancient masonry structures using infrared thermography." Proc., InfraMation 2007 Conf., ITC, Nashua, NH.
29. Rosina, E., and, Spodek, J. (2003). " Using infrared thermography to detect moisture in historic masonry: A case study in Indiana." APT Bull., 34 (1), 11-16. 0848-8525 10.2307/1504847
30. Schlueter, A., and, Thesseling, F. (2009). " Building information model based energy/exergy performance assessment in early design stages." J. Autom. Constr., 18 (2), 153-163. 0926-5805 10.1016/j.autcon.2008.07.003
31. Schreyer, A. C., and, Hoque, S. (2009). " Interactive three-dimensional visualization of building envelope systems using infrared thermography and SketchUp." Proc., InfraMation 2009, ITC, Nashua, NH.
32. Tsai, F., and, Lin, H. (2004). " Realistic texture mapping on 3D building models." 〈 http://www.a-a-r-s.org/acrs/ proceeding/ACRS2004/Papers/3DG04-6.htm ⌠(Dec. 23, 2010).
33. U.S. Department of Commerce (U.S. DOC). (2012). " The 2012 statistical abstract: Construction & housing section." 〈 http://www.census.gov/prod/2011pubs/12statab/construct.pdf ⌠(Aug. 17, 2012).
34. U.S. Department of Energy (U.S. DOE). (2010). " 2010 U.S. DOE buildings energy databook." 〈 http://buildingsdatabook. eren.doe.gov/ ⌠(May 23, 2012).
35. Yi, Y. K., and, Malkawi, A. M. (2009). " Optimizing building form for energy performance based on hierarchical geometry relation." J. Autom. Constr., 18 (6), 825-833. 0926-5805 10.1016/j.autcon.2009.03.006