Dendrite bending during directional solidification

Proceedings of the International Symposium on Superalloys

Volumn , Issue , 2012, Pages 615-624

  Aveson, J W ^a   Reinhart, G ^b,c   Nguyen Thi, H ^b,c   Mangelinck Noel N ^b,c   Tandjaoui, A ^b,c   Billia, B ^b,c   Goodwin, K ^d   Lafford, T A ^e   Baruchel, J ^e   Stone, H J ^a   D'Souza, N ^d  

^a UNIVERSITY OF CAMBRIDGE   (United Kingdom)

^b AIX MARSEILLE UNIVERSITÉ   (France)

^c CNRS   (France)

^d ROLLS ROYCE PLC   (United Kingdom)

^e EUROPEAN SYNCHROTRON RADIATION FACILITY   (France)

Author keywords

CMSX 4; Dendrites; Electron backscattered diffraction; Solidification; X ray imaging

Indexed keywords

CMSX-4; ELECTRON BACK-SCATTERED DIFFRACTION; EUROPEAN SYNCHROTRON RADIATION FACILITIES; EXPERIMENTAL EVIDENCE; NICKEL- BASED SUPERALLOYS; SINGLE CRYSTAL CASTING; X-RAY RADIOGRAPHIC IMAGING; XRAY IMAGING;

DENDRITES (METALLOGRAPHY); ELECTRON DIFFRACTION; SINGLE CRYSTALS; SOLIDIFICATION; SUPERALLOYS; TORSIONAL STRESS;

BENDING (DEFORMATION);

EID: 84885935747     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (45)

1. M. Rappaz and E. Blank. Combined X-ray mi-crodiffraction and topography experiment for microstructural analysis of heterogeneous materials. Journal of Materials Science, 22: 896-906, 1987.
2. R.E. Napolitano and R.J. Schaefer. The convergence-fault mechanism for low-angle boundary formation in single-crystal castings. Journal of Materials Science, 35: 1641, 2000.
3. N. Siredey, M. Boufoussi, S. Denis, and J. Lacaze. Dendritic growth and crystalline quality of nickel-base single grains. Journal of Crystal Growth, 130: 132, 1993.
4. V. Rändle. Applications of electron backscat-ter diffraction to materials science: status in 2009. Journal of Materials Science, 44: 4211, 2009.
5. A.J. Wilkinson. Assessment of lattice strain, rotation and dislocation content using electron back-scatter diffraction. Journal of Physics: Conference Series, 326: 012004, 2011.
6. N. D'Souza, M. Newell, K. Devendra, P.A. Jennings, M.G. Ardakani, and B.A. Shollock. Formation of low angle grain boundaires in Ni-based superalloys. Materials Science and Engineering A, 413-414: 567-570, 2005.
7. N. Stanford, A. Djakovic, B. Shollock, M. McLean, N. D'Souza, and P. Jennings. Defect grains in the melt-back region of CMSX-4 single crystal seeds. In K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, editors, Superalloys 2OO4. The Minerals, Metals and Materials Society, 2004.
8. N. D'Souza, P.A. Jennings, X.L. Yang, H.B. Dong, P.D. Lee, and M. McLean. Seeding of single-crystal superalloys - role of constitutional undercooling and primary dendrite orientation on stray-grain nucleation and growth. Metallurgical and Materials Transactions B, 36: 657, 2005.
9. E.W.J. Miller and J. Beech. In situ radiographic observations of alloy solidification. Metallography, 5: 298-300, 1972.
10. E.W.J. Miller, M.P. Stephenson, and J. Beech. A technique for the direct observation of alloy solidification. Journal of Physics E: Scientific Instruments, 8: 33-37, 1975.
11. M. Asta, C. Beckermann, A. Karma, W. Kurz, R. Napolitano, M. Plapp, G. Purdy, M. Rappaz, and R. Trivedi. Solidification microstructures and solid-state parallels: recent developments, future directions. Acta Materialia, 57: 941-971, 2009.
12. D. Ruvalcaba, R.H. Mathiesen, D.G. Eskin, L. Arnberg, and L. Katgerman. In situ observations of dendrite fragmentation due to local solute enrichment during directional solidification of an aluminium alloy. Acta Materialia, 55: 4287-4292, 2007.
13. B. Billia, N. Bergeon, H. Nguyen-Thi, H. Jam-gotchian, J. Gastaldi, and G. Grange. Cumulative mechanical moments and microstructure deformation induced by growth shape in columnar solidification. Physical Review Letters, 93: 126105, 2004.
14. G. Reinhart, A. Buffet, H. Nguyen-Thi, B. Billia, H. Jung, N. Mangelinck-Noël, N. Bergeon, T. Schenk, J. Hartwig, and J. Baruchel. In situ and real time analysis of the formation of strains and microstructure defects during sol-dification of Al-3.5 wt pet Ni alloys. Metallurgical and Materials Transactions A, 39: 865-874, 2008.
15. G. Zimmermann, U. Hecht, M. Mathes, and R.H. Mathiesen. Time resolved x-ray imaging of eutectic cellular patterns evolving during solidification of ternary Al-Cu-Ag alloys. International Journal of Materials Research, 101: 1484-1489, 2010.
16. CM. Gourlay, K. Nogita, A.K. Dahle, Y. Yamamoto, K. Uesugi, T. Nagira, M. Yoshiya, and H. Yasuda. In situ investigation of unidirectional solidification in Sn-0.7Cu and Sn-0.7Cu-0.06Ni. Acta Materialia, 59: 4043, 2011.
17. CM. Gourlay, A.K. Dahle, T. Nagira, N. Nakatsuka, K. Nogita, K. Uesugi, and H. Yasuda. Granular deformation mechanisms in semi-solid alloys. Acta Materialia, 59: 4933, 2011.
18. R.H. Mathiesen, L. Arnberg, F. Mo, T. Weitkamp, and A. Snigirev. Time resolved x-ray imaging of dendritic growth in binary alloys. Physical Review Letters, 83: 5062-5065, 1999.
19. H. Nguyen-Thi, H. Jamgotchian, J. Gastaldi, J. Hartwig, T. Schenk, H. Klein, B. Billia, J. Baruchel, and Y. Dabo. Preliminary In situ and real-time study of directional solidification of metallic alloys by x-ray imaging techniques. Journal of Physics D: Applied Physics, 36: A83-A86, 2003.
20. H. Yasuda, T. Nagira, M. Yoshiya, N. Nakatsuka, A. Sugiyama, K. Uesugi, and K. Umetani. Development of X-ray imaging for observing solidification of carbon steels. ISIJ International, 51: 402-408, 2011.
21. T. Nagira, CM. Gourlay, A. Sugiyama, M. Uesugi, Y. Kanzawa, M. Yoshiya, K. Uesugi, K. Umetani, and H. Yasuda. Direct observation of deformation in a semi-solid carbon steel. Scripta Materialia, 64: 1129, 2011.
22. B. Li, H.D. Brody, and A. Kazimirov. Real time observation of dendrite coarsening in Sn-13wt pct Bi alloy by synchrotron microradiography. Physical Review E, 70: 062602, 2004.
23. A. Authier. Dynamical theory of x-ray diffraction. Oxford University Press, 2004.
24. M. Rettenmayr. Melting and remelting phenomena. International Materials Reviews, 54: 1-17, 2009.
25. J. Pilling and A. Hellawell. Mechanical deformation of dendrites by fluid flow. Metallurgical and Materials Transactions A, 27: 229-232, 1996.
26. K. Dragnevski, A.M. Mullis, D.J. Walker, and R.F. Cochrane. Mechanical deformation of dendrites by fluid flow during the solidification of undercooled melts. Acta Materialia, 50: 3743-3755, 2002.
27. A.M. Mullis. Deformation of dendrites by fluid flow during rapid solidification. Materials Science and Engineering A, 304-306: 245-249, 2001.
28. S. Ananiev, P. Nikrityuk, and K. Eckert. Dendrite fragmentation by catastrophic elastic remelting. Acta Materialia, 57: 657-655, 2009.
29. S.M. Copley, A.F. Giamei, S.M. Johnson, and M.F. Hornbecker. The origin of freckles in uni-directionally solidified castings. Metallurgical Transactions, 1: 2193-2204, 1970.
30. S.S.L. Peppin, H.E. Huppert, and M.G. Worster. Steady-state solidification of aqueous ammonium chloride. Journal of Fluid Mechanics, 599: 465-476, 2008.
31. J.W. Aveson. Studying flow effects on dendrite fragmentation using Rayleigh-Bénard convection. Materials Science and Technology, dx.doi.org/10.1179/1743284711Y.0000000128, 2012.
32. T. Li, X. Lin, and W. Huang. Morphological evolution during solidification under stirring. Acta Materialia, 54: 4815-4824, 2006.
33. T. Sato, W. Kurz, and K. Ikawa. Experiments on dendrite branch detachment in the succinonitrile-camphor. Transactions of the Japan Institute of Metals, 28: 1012-1021, 1987.
34. S. Liu, S.Z. Liu, and A. Hellawell. Mechanism of dendrite fragmentation in casting. In Light Metals 1997, 1997.
35. H. Jung and N. Mangelinck-Noël and H. Nguyen-Thi and N. Bergeon and B. Billia and A. Buffet and G. Reinhart and T. Schenk and J. Baruchel. Fragmentation in an al-7wt%si alloy studied in real time by x-ray synchrotron techniques. International Journal of Cast Metals Research, 22: 208, 2009.
36. N.J. D'Souza, P.A. Jennings, and K. Devendra. Method and mould for casting articles with a pre-determined crystalline orientation. United States Patent 7449063, 2008.
37. J. Madison, J. Spowart, D. Rowenhorst, L.K. Aagesen, K. Thornton, and T.M. Pollock. Modeling fluid flow in three-dimensional single crystal dendritic structures. Acta Materialia, 58: 2864-2875, 2010.
38. R.A. Hobbs, S. Tin, and C.M.F. Rae. A casta-bility model based on elemental solid-liquid partitioning in advanced nickel-based single crystals superalloys. Metallurgical and Materials Transactions A, 36: 2761, 2005.
39. A.P. Sutton and R.W. Balluffi. Interfaces in crystalline materials. Oxford University Press, 1995.
40. J.-C. Glez and J. Driver. Orientation distribution analysis in deformed grains. Journal of Applied Crystallography, 34: 280, 2001.
41. N. Warnken and R.C. Reed. On the characterization of directionally solidified dendritic microstructures. Metallurgical and Materials Transactions A, 42: 1675, 2011.
42. S.L. Altmann. Rotations, quaternions and double groups. Oxford Science Publications, 1986.
43. A. Bogno, H. Nguyen-Thi, N. Bergeon, N. Mangelinck-Noël, T. Schenk, B. Billia, E. Boller, and J. Baruchel. Application of synchrotron x-ray imaging to the study of dendritic equiaxed microstructure formation in Al-Cu alloys. Nuclear Instruments and Methods in Physics Research B, 268: 394-398, 2010.
44. W. Kurz and D.J. Fisher. Fundamentals of solidification. Trans Tech, 1992.
45. H. Mathur. Private communication, 2012.