Green composites based on wheat gluten matrix and posidonia oceanica waste fibers as reinforcements

Polymer Composites

Volumn 34, Issue 10, 2013, Pages 1663-1669

  Ferrero, B ^a   Boronat, T ^a   Moriana, R ^b   Fenollar, O ^a   Balart, R ^a  

^a UNIVERSITAT POLITÈCNICA DE VALÈNCIA   (Spain)

^b ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

HEAT DEFLECTION TEMPERATURE; MECHANICAL PERFORMANCE; ORGANIC COMPONENTS; POLYMERIC MATRICES; POSIDONIA OCEANICA; REINFORCING MATERIALS; SCANNING ELECTRONIC MICROSCOPY; THERMO-MECHANICAL BEHAVIORS;

MECHANICAL PROPERTIES; POLYPROPYLENES;

REINFORCEMENT;

EID: 84885020557     PISSN: 02728397     EISSN: 15480569     Source Type: Journal    
DOI: 10.1002/pc.22567     Document Type: Article

References (47)

1. A. Arias, M.C. Heuzey, and, M.A. Huneault, Cellulose, 20, 439 (2013).
2. J. Summerscales, A. Virk, and, W. Hall, Compos. Part A-Appl. Sci. Manuf., 44, 132 (2013).
3. E. Corradini, S.H. Imam, J.A.M. Agnelli, and, L.H.C. Mattoso, J. Polym. Environ., 17, 1 (2009).
4. E. Fages, S. Girones, L. Sanchez-Nacher, D. Garcia-Sanoguera, and, R. Balart, Polym. Compos., 33, 253 (2012).
5. T.H. Mokhothu, B.R. Guduri, and, A.S. Luyt, Polym. Compos., 32, 2001 (2011).
6. A. Shahzad, Polym. Compos., 33, 1129 (2012).
7. J.H. Song, S.D. Mun, and, C.S. Kim, Polym. Compos., 32, 1174 (2011).
8. R. Wang, and, T.P. Schuman, Express Polym. Lett., 7, 272 (2013).
9. H. Miyagawa, A.K. Mohanty, R. Burgueno, L.T. Drzal, and, M. Misra, Ind. Eng. Chem. Res., 45, 1014 (2006).
10. Q. Zhou, D. Cho, W.H. Park, B.K. Song, and, H.J. Kim, J. Appl. Polym. Sci., 122, 2774 (2011).
11. L. Jasinska, and, C.E. Koning, J. Polym. Sci. Pol. Chem., 48, 2885 (2010).
12. M. Ionescu, X.M. Wan, N. Bilic, and, Z.S. Petrovic, J. Polym. Environ., 20, 647 (2012).
13. J.M. Espana, L. Sanchez-Nacher, T. Boronat, V. Fombuena, and, R. Balart, J. Am. Oil Chem. Soc., 89, 2067 (2012).
14. M.D. Samper, V. Fombuena, T. Boronat, D. Garcia-Sanoguera, and, R. Balart, J. Am. Oil Chem. Soc., 89, 1521 (2012).
15. D. Bertomeu, D. Garcia-Sanoguera, O. Fenollar, T. Boronat, and, R. Balart, Polym. Compos., 33, 683 (2012).
16. E. Mistri, N.R. Bandyopadhyay, S.N. Ghosh, and, D. Ray, Ind. Eng. Chem. Res., 49, 11357 (2010).
17. K. Adekunle, R. Ghoreishi, M. Ehsani, S.W. Cho, and, M. Skrifvars, J. Biobased Mater. Bioenergy, 6, 172 (2012).
18. B.K. Goriparthi, K.N.S. Suman, and, M.R. Nalluri, Polym. Compos., 33, 237 (2012).
19. J.Z. Ma, Q.N. Xu, D.G. Gao, J.H. Zhou, and, J. Zhang, Polym. Degrad. Stabil., 97, 1545 (2012).
20. G.B. He, M. Feng, and, C.P. Dai, Holzforschung, 66, 857 (2012).
21. S. Khosravi, P. Nordqvist, F. Khabbaz, and, M. Johansson, Ind. Crop. Prod., 34, 1509 (2011).
22. P. Nordqvist, M. Lawther, E. Malmstrom, and, F. Khabbaz, Ind. Crop. Prod., 38, 139 (2012).
23. C. Silva, F. Sousa, G.G. Bitz, and, A. Cavaco-Paulo, Food Technol. Biotechnol., 42, 51 (2004).
24. S. Hemsri, K. Grieco, A.D. Asandei, and, R.S. Parnas, Compos. Part A-Appl. Sci. Manuf., 43, 1160 (2012).
25. P. Muensri, T. Kunanopparat, P. Menut, and, S. Siriwattanayotin, Compos. Part A-Appl. Sci. Manuf., 42, 173 (2011).
26. B. Montano-Leyva, G.G.D. da Silva, E. Gastaldi, P. Torres-Chavez, N. Gontard, and, H. Angellier-Coussy, Ind. Crop. Prod., 43, 545 (2013).
27. J. Dani, D.J.P. Reddy, A.V. Rajulu, and, R. Li, Polym. Compos., 32, 398 (2011).
28. S. Kumagai, and, Y. Matsuo, Ind. Crop. Prod., 43, 640 (2013).
29. R.L. Quirino, and, R.C. Larock, J. Appl. Polym. Sci., 126, 860 (2012).
30. J.E. Crespo, L. Sanchez, F. Parres, and, J. Lopez, Polym. Compos., 28, 71 (2007).
31. E. Garcia-Hernandez, A. Licea-Claverie, A. Zizumbo, A. Alvarez-Castillo, and, P.J. Herrera-Franco, Polym. Compos., 25, 134 (2004).
32. W. Yamsaengsung, and, N. Sombatsompop, Polym. Compos., 30, 248 (2009).
33. V.J.P. Vilar, C.M.S. Botelho, and, R.A.R. Boaventura, Bioresour. Technol., 99, 750 (2008).
34. J.G. Wu, X. Zhang, J.L. Wan, F.Y. Ma, Y. Tang, and, X.Y. Zhang, Bioresour. Technol., 102, 11258 (2011).
35. M. Chauhan, M. Gupta, B. Singh, A.K. Singh, and, V.K. Gupta, Polym. Compos., 33, 324 (2012).
36. R. Khiari, Z. Marrakchi, M.N. Belgacem, E. Mauret, and, F. Mhenni, Compos. Sci. Technol., 71, 1867 (2011).
37. K. Ramzi, F. Ikhlass, and, M.M. Farouk, Fiber. Polym., 11, 593 (2010).
38. I. Guezguez, S. Dridi-Dhaouadi, and, E. Mhenni, Ind. Crop. Prod., 29, 197 (2009).
39. M.C. Ncibi, B. Mahjoub, and, M. Seffen, Int. J. Environ. Sci. Technol., 4, 433 (2007).
40. R. Khiari, M.F. Mhenni, M.N. Belgacem, and, E. Mauret, J. Polym. Environ., 19, 80 (2011).
41. S. Cengiz, and, L. Cavas, Mar. Biotechnol., 12, 728 (2010).
42. O. Theander, and, E.A. Westerlund, J. Agric. Food Chem., 34, 330 (1986).
43. R. Khiari, M.F. Mhenni, M.N. Belgacem, and, E. Mauret, Bioresour. Technol., 101, 775 (2010).
44. S. Alila, I. Besbes, M.R. Vilar, P. Mutje, and, S. Boufi, Ind. Crop. Prod., 41, 250 (2013).
45. A.K. Bledzki, and, J. Gassan, Prog. Polym. Sci., 24, 221 (1999).
46. J.P. Lopez, J. Girones, J.A. Mendez, N.E. El Mansouri, M. Llop, P. Mutje, and, F. Vilaseca, BioResources, 7, 5478 (2012).
47. A. Shahzad, Polym. Compos., 33, 120 (2012).