Use of eco-friendly epoxy resins from renewable resources as potential substitutes of petrochemical epoxy resins for ambient cured composites with flax reinforcements

Polymer Composites

Volumn 33, Issue 5, 2012, Pages 683-692

  Bertomeu, D ^a   Garcia Sanoguera D ^a   Fenollar, O ^a   Boronat, T ^a   Balart, R ^a  

^a UNIVERSITAT POLITÈCNICA DE VALÈNCIA   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

COMPOSITE LAMINATE; CURING BEHAVIOR; DIFFERENTIAL SCANNING CALORIMETRIES (DSC); ECO-FRIENDLY; EXOTHERMICITY; GEL POINT; HAND LAY-UP; HEAT DEFLECTION TEMPERATURE; HIGH COSTS; MANUFACTURING COST; MECHANICAL AND THERMAL PROPERTIES; MODEL-MAKING; RENEWABLE RESOURCE; THERMO-MECHANICAL ANALYSIS; VACUUM ASSISTED RESIN TRANSFER MOLDING; VICAT SOFTENING TEMPERATURE;

CURING; DIFFERENTIAL SCANNING CALORIMETRY; ENVIRONMENTAL PROTECTION; FLAX; GLASS FIBERS; LAMINATES; LINEN; MECHANICAL PROPERTIES; REINFORCEMENT; RESINS; THERMOSETS; VEGETABLE OILS; YARN;

EPOXY RESINS;

EID: 84859920037     PISSN: 02728397     EISSN: 15480569     Source Type: Journal    
DOI: 10.1002/pc.22192     Document Type: Article

References (45)

1. C. Alves, P.M.C. Ferrao, A.J. Silva, L.G. Reis, M. Freitas, L.B. Rodrigues, and, D.E. Alves, J. Clean Prod., 18, 313 (2010).
2. M.J. John, and, S. Thomas, Carbohydr. Polym., 71, 343 (2008).
3. A.K. Mohanty, M. Misra, and, L.T. Drzal, J. Polym. Environ., 10, 19 (2002).
4. I. Pillin, A. Kervoelen, A. Bourmaud, J. Goimard, N. Montrelay, and, C. Baley, Ind. Crop. Prod., 34, 1556 (2011).
5. J. Summerscales, N.P.J. Dissanayake, A.S. Virk, and, W. Hall, Compos. Pt. A-Appl. Sci. Manuf., 41, 1329 (2010).
6. A.S. Singha, and, V.K. Thakur, Polym. Compos., 31, 459 (2010).
7. P.A. Sreekumar, R. Saiah, J.M. Saiter, N. Leblanc, K. Joseph, G. Unnikrishnan, and, S. Thomas, Polym. Compos., 30, 768 (2009).
8. A. Athijayamani, M. Thiruchitrambalam, U. Natarajan, and, B. Pazhanivel, Polym. Compos., 31, 723 (2010).
9. Q.H. Mu, C. Wei, and, S.Y. Feng, Polym. Compos., 30, 131 (2009).
10. K. Sever, M. Sarikanat, Y. Seki, G. Erkan, U.H. Erdogan, and, S. Erden, Ind. Crop. Prod., 35, 22 (2012).
11. B.M. Wood, S.R. Coles, S. Maggs, J. Meredith, and, K. Kirwan, Compos. Sci. Technol., 71, 1804 (2011).
12. A. Alavudeen, M. Thiruchitrambalam, N. Venkateshwaran, and, A. Athijayamani, Rev. Adv. Mater. Sci., 27, 146 (2011).
13. S.J. Eichhorn, C.A. Baillie, N. Zafeiropoulos, L.Y. Mwaikambo, M.P. Ansell, A. Dufresne, K.M. Entwistle, P.J. Herrera-Franco, G.C. Escamilla, L. Groom, M. Hughes, C. Hill, T.G. Rials, and, P.M. Wild, J. Mater. Sci., 36, 2107 (2001).
14. N.P.J. Dissanayake, J. Summerscales, S.M. Grove, and, M.M. Singh, J. Biobased Mater. Bioenergy, 3, 245 (2009).
15. M.M. Hassan, and, M.A. Khan, Polym.-Plast. Technol. Eng., 47, 847 (2008).
16. D.M. Panaitescu, M.D. Iorga, S. Serian, and, A.N. Frone, Mater. Plast., 47, 1 (2010).
17. H.U. Zaman, M.A. Khan, and, R.A. Khan, Polym.-Plast. Technol. Eng., 48, 1130 (2009).
18. Y. Zou, H.L. Xu, and, Y.Q. Yang, J. Polym. Environ., 18, 464 (2010).
19. P.A. de Arcaya, A. Retegi, A. Arbelaiz, J.M. Kenny, and, I. Mondragon, Polym. Compos., 30, 257 (2009).
20. E. Twite-Kabamba, A. Mechraoui, and, D. Rodrigue, Polym. Compos., 30, 1401 (2009).
21. I.M. De Rosa, A. Iannoni, J.M. Kenny, D. Puglia, C. Santulli, F. Sarasini, and, A. Terenzi, Polym. Compos., 32, 1362 (2011).
22. S.J. Christian, and, S.L. Billington, Compos. Pt. B-Eng., 42, 1920 (2011).
23. A. Hodzic, R. Coakley, R. Curro, C.C. Berndt, and, R.A. Shanks, J. Biobased Mater. Bioenergy, 1, 46 (2007).
24. B. Bax, and, J. Mussig, Compos. Sci. Technol., 68, 1601 (2008).
25. A.R. Campos, A.M. Cunha, A. Tielas, and, A. Mateos, Mater. Sci. Forum, 587-588, 187 (2008).
26. M. Leite, C.R.G. Furtado, L.O. Couto, F. Oliveira, and, T.R. Correia, Polimeros, 20, 339 (2010).
27. R. Saiah, P.A. Sreekumar, R. Gopalakrishnan, N. Leblanc, R. Gattin, and, J.M. Saiter, Polym. Compos., 30, 1595 (2009).
28. V. Athawale, and, N.J. Shetty, J. Polym. Mater., 25, 613 (2008).
29. P. Campaner, D. D'Amico, L. Longo, C. Stifani, and, A. Tarzia, J. Appl. Polym. Sci., 114, 3585 (2009).
30. Raju, and, P. Kumar, J. Coat. Technol. Res., 8, 563 (2011).
31. B.S. Rao, and, A. Palanisamy, React. Funct. Polym., 71, 148 (2011).
32. L. Chen, S.X. Zhou, S.S. Song, B. Zhang, and, G.X. Gu, J. Coat. Technol. Res., 8, 481 (2011).
33. K. Ghosh, P. Garcia, and, E. Galgoci, Anti-Corros. Methods Mater., 46, 100 (1999).
34. F.S. Guner, Y. Yagci, and, A.T. Erciyes, Prog. Polym. Sci., 31, 633 (2006).
35. T. Tsujimoto, H. Uyama, and, S. Kobayashi, Polym. Degrad. Stabil., 95, 1399 (2010).
36. A.P. Gupta, S. Ahmad, and, A. Dev, Polym. Eng. Sci., 51, 1087 (2011).
37. N.W. Manthey, F. Cardona, T. Aravinthan, and, T. Cooney, J. Appl. Polym. Sci., 122, 444 (2011).
38. F. Mustata, N. Tudorachi, and, D. Rosu, Compos. Pt. B-Eng., 42, 1803 (2011).
39. T. Takahashi, K.I. Hirayarna, N. Teramoto, and, M. Shibata, J. Appl. Polym. Sci., 108, 1596 (2008).
40. H. Miyagawa, M. Misra, L.T. Drzal, and, A.K. Mohanty, Polym. Eng. Sci., 45, 487 (2005).
41. J.D.E. Perez, D.M. Haagenson, S.W. Pryor, C.A. Ulven, and, D.P. Wiesenborn, Trans. ASABE, 52, 1289 (2009).
42. S.S. Morye, and, R.P. Wool, Polym. Compos., 26, 407 (2005).
43. W. Thielemans, and, R.P. Wool, Polym. Compos., 26, 695 (2005).
44. A.F. Abdelkader, and, J.R. White, J. Appl. Polym. Sci., 98, 2544 (2005).
45. A. Astruc, E. Joliff, J.F. Chailan, E. Aragon, C.O. Petter, and, C.H. Sampaio, Prog. Org. Coat., 65, 158 (2009).