Properties of biobased epoxy resins from epoxidized soybean oil (ESBO) cured with maleic anhydride (MA)

JAOCS, Journal of the American Oil Chemists' Society

Volumn 89, Issue 11, 2012, Pages 2067-2075

  Espana J M ^a   Sanchez Nacher L ^a   Boronat, T ^a   Fombuena, V ^a   Balart, R ^a  

^a UNIVERSITAT POLITÈCNICA DE VALÈNCIA   (Spain)

Author keywords

Biobased products; Coatings; Fat and oil; Polymers; Vegetable oilseed

Indexed keywords

BIO-BASED PRODUCTS; BIOBASED EPOXY; CHARPY IMPACT TESTS; CROSS-LINKING DEGREE; CROSS-LINKING PROCESS; CURED MATERIALS; CURING PROCESS; EPOXIDIZED SOYBEAN OIL; FAT AND OIL; HEAT DEFLECTION TEMPERATURE; MECHANICAL BEHAVIOR; RENEWABLE RESOURCE; SHORE D-HARDNESS; THERMAL CHARACTERISTICS; THERMO-MECHANICAL ANALYSIS; THERMOSET RESIN; VICAT SOFTENING TEMPERATURE;

COATINGS; CURING; DIFFERENTIAL SCANNING CALORIMETRY; EPOXY RESINS; MALEIC ANHYDRIDE; MECHANICAL PROPERTIES; OILSEEDS; POLYMERS; THERMOSETS;

RESINS;

GLYCINE MAX;

EID: 84870059211     PISSN: 0003021X     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11746-012-2102-2     Document Type: Article

References (26)

1. Mbaraka IK, Shanks BH (2006) Conversion of oils and fats using advanced mesoporous heterogeneous catalysts. J Am Oil Chem Soc 83:79-91
2. Kumar MNS, Yaakob Z, Mohan N, Siddaramaiah, Babu SPK (2010) Mechanical and abrasive wear studies on biobased jatropha oil cake incorporated glass-epoxy composites. J Am Oil Chem Soc 87:929-936
3. Li YT, Fu LY, Lai SF, Cai XC, Yang LT (2010) Synthesis and characterization of cast resin based on different saturation epoxidized soybean oil. Eur J Lipid Sci Technol 112:511-516
4. Teng GH, Soucek MD (2000) Epoxidized soybean oil-based ceramer coatings. J Am Oil Chem Soc 77:381-387
5. Zhu J, Chandrashekhara K, Flanigan V, Kapila S (2004) Manufacturing and mechanical properties of soy-based composites using pultrusion. Compos Part A: Appl Sci Manuf 35:95-101
6. Rocks J, Rintoul L, Vohwinkel F, George G (2004) The kinetics and mechanism of cure of an amino-glycidyl epoxy resin by a coanhydride as studied by FT-Raman spectroscopy. Polymer 45:6799-6811
7. Jin FL, Park SJ (2008) Thermomechanical behavior of epoxy resins modified with epoxidized vegetable oils. Polym Int 57:577-583
8. Gupta AP, Ahmad S, Dev A (2010) Development of novel biobased soybean oil epoxy resins as a function of hardener stoichiometry. Polym Plast Techn Eng 49:657-661
9. Costa APO, Gerbase AE, Petzhold CL (2011) Investigation of the kinetics of cure by differential scanning calorimetry (DSC) of epoxy resins prepared from epoxidized soybean oil with different anhydrides and tertiary amines. Polimeros Ciencia E Tecnologia 21:146-150
10. Lu J, Khot S, Wool RP (2005) New sheet molding compound resins from soybean oil. I: synthesis and characterization. Polymer 46:71-80
11. Miyagawa H, Misra M, Drzal LT, Mohanty AK (2005) Fracture toughness and impact strength of anhydride-cured biobased epoxy. Polym Eng Sci 45:487-495
12. Zhan GZ, Zhao L, Hu S, Gan WJ, Yu YF, Tang XL (2008) A novel biobased resin-epoxidized soybean oil modified cyanate ester. Polym Eng Sci 48:1322-1328
13. Jin FL, Park SJ (2008) Impact-strength improvement of epoxy resins reinforced with a biodegradable polymer. Mater Sci Eng A: Struct Mater Prop Microstruct Process 478:402-405
14. Tan SG, Chow WS (2011) Curing characteristics and thermal properties of epoxidized soybean oil based thermosetting resin. J Am Oil Chem Soc 88:915-923
15. Wang JH, Liang GZ, Yan HX, He SB, Yang LL (2010) Influence of the ratio of epoxy/cyanate ester on the curing behavior of epoxy/dicyclopentadiene bisphenol cyanate ester system. High Perform Polym 22:286-298
16. Miyagawa H, Mohanty AK, Misra M, Drzal LT (2004) Thermophysical and impact properties of epoxy containing epoxidized linseed oil, 1: anhydride-cured epoxy. Macromol Mater Eng 289:629-635
17. Miyagawa H, Mohanty AK, Misra M, Drzal LT (2004) Thermophysical and impact properties of epoxy containing epoxidized linseed oil, 2 (a): amine-cured epoxy. Macromol Mater Eng 289:636-641
18. Jin FL, Park SJ (2008) Fracture toughness of difunctional epoxy resin/thermally latent initiator system modified with polyesters. J Ind Eng Chem 14:564-567
19. Liu ZS, Erhan SZ, Calve PD (2004) Solid freeform fabrication of epoxidized soybean oil/epoxy composites with di-, tri-, and polyethylene amine curing agents. J Appl Polym Sci 93:356-363
20. Zhu J, Chandrashekhara K, Flanigan V, Kapila S (2004) Curing and mechanical characterization of a soy-based epoxy resin system. J Appl Polym Sci 91:3513-3518
21. Czub P (2008) Epoxy compositions with use of modified vegetable oils. Polimery 53:182-189
22. Cai S-F, Wang L-S (2011) Epoxidation of soybean oil catalyzed by pi-C (5) H (5) NC (16) H (33) (3) PW (4) O (16) with hydrogen peroxide and ethyl acetate as solvent. Nat Prod Commun 6:1141-1143
23. Nimbalkar RV, Athawale VD (2010) Synthesis and characterization of canola oil alkyd resins based on novel acrylic monomer (ATBS). J Am Oil Chem Soc 87:947-954
24. Liu ZS, Erhan SZ, Calvert PD (2004) Solid freeform fabrication of soybean oil-based composites reinforced with clay and fibers. J Am Oil Chem Soc 81:605-610
25. Gerbase AE, Petzhold CL, Costa APO (2002) Dynamic mechanical and thermal behavior of epoxy resins based on soybean oil. J Am Oil Chem Soc 79:797-802
26. Park SJ, Jin FL, Lee JR (2004) Effect of biodegradable epoxidized castor oil on physicochemical and mechanical properties of epoxy resins. Macromol Chem Phys 205:2048-2054