Discrete impact modeling of inter-and intra-laminar failure in composites

Solid Mechanics and its Applications

Volumn 192, Issue , 2013, Pages 339-392

  Bouvet, Christophe ^a   Hongkarnjanakul, Natthawat ^a   Rivallant, Samuel ^a   Barrau, Jean Jacques ^a  

^a UNIVERSITÉ DE TOULOUSE   (France)

Author keywords

[No Author keywords available]

Indexed keywords

BLOCKING PHENOMENON; DIFFERENT DAMAGES; DISSIPATED ENERGY; EXPERIMENTAL DATABASE; GOOD CORRELATIONS; INTEGRATION POINTS; INTERFACE DELAMINATION; VOLUME ELEMENTS;

CRACKS; DELAMINATION; ENERGY DISSIPATION;

FAILURE (MECHANICAL);

EID: 84884840151     PISSN: 09250042     EISSN: None     Source Type: Book Series    
DOI: 10.1007/978-94-007-5329-7_8     Document Type: Article

References (59)

1. Abrate S (1998) Impact on composite structures. Cambridge University Press, Cambridge
2. Petit S, Bouvet C, Bergerot A, Barrau JJ (2007) Impact and compression after impact experimental study of a composite laminate with a cork thermal shield. Compos Sci Technol 67:3286-3299 (Pubitemid 47569712)
3. Zheng D, Binienda WK (2007) Effect of permanent indentation on the delamination threshold for small mass impact on plates. Int J Sol Struct 44(25-26):8143-8158 (Pubitemid 47632557)
4. Eve O (1999) Etude du comportement des structures composites endommagées par un impact basse vitesse. Thèse de doctorat, Université deMetz
5. Allix O, Blanchard L (2006) Mesomodeling of delamination: towards industrial applications. Compos Sci Technol 66:731-744 (Pubitemid 43329419)
6. Choi HY, Chang K (1992) A model for predicting damage in graphite/expoxy laminated composites resulting from low-velocity point impact. J Comp Mat 26(14):2134-2169
7. De Moura MF, Gonçalves SF (2004) Modelling the interaction between matrix cracking and delamination in carbon-epoxy laminates under low velocity impact. Compos Sci Technol 64:1021-1027
8. Guinard S, Allix O, Guédra-Degeorges D, Vinet A (2002) A 3D damage analysis of lowvelocity impacts on laminated composites. Compos Sci Technol 62:585-589 (Pubitemid 34213095)
9. Mulle M, Zitoune R, Collombet F, Robert L, Grunevald YH (2009) Embedded FBGs and 3-D DIC for the stress analysis of a structural specimen subjected to bending. Compos Struct 91:48-55
10. Rouchon J (1995) The fatigue and damage tolerance aspects for composite aircraft structures. Proceedings of ICAF symposium, Delft, The Netherlands
11. Alderliesten RC (2008) Damage tolerance of bonded aircraft structures. Int J Fati 31(6):1024-1030
12. Tropis A, Thomas M, Bounie JL, Lafon P (1994) Certification of the composite outer wing of the ATR72. J Aero Eng 209:327-339
13. Chang FK, Chang K (1987) A progressive damage model for laminate composites containing stress concentrations. J Comp Mat 834-855 (Pubitemid 18535438)
14. Aymerich F (2008) Priolo, "Characterization of fracture modes in stiched and unstiched crossply laminates subjected to low-velocity impact and compression after impact loading". Int J Imp Eng 35:591-608 (Pubitemid 351374624)
15. Renault M (1994) Compression après impact d'une plaque stratifiée carbone époxyde - Etude expérimentale et modélisation éléments finis associée. Rapport interne EADS CCR
16. Lopes CS, Camanho PP, Gürdal Z,Maimí P, González EV (2009) Low-velocity impact damage on dispersed stacking sequence laminates. Part II: Numerical simulations. Compos Sci Technol 69(7-8):937-947
17. Faggiani A, Falzon BG (2010) Predicting low-velocity impact damage on a stiffened composite panel. Compos Part A 41(6):737-749
18. Geubelle PH, Jeffrey S (1998) Baylor Impact-induced delamination of composites: a 2D simulation. Compos Part B Eng 29(5):589-602 (Pubitemid 128381245)
19. Aymerich F, Dore F, Priolo P (2009) Simulation of multiple delaminations in impacted crossply laminates using a finite element model based on cohesive interface elements. Compos Sci Technol 69:1699-1709
20. Wisnom MR(2010) "Modelling discrete failures in composites with interface elements" Comp. Compos Part A Appl Sci Manufac 41(7):795-805
21. Davies GAO, Olsson R (2004) Impact on composite structures. Aero J 108:541-563 (Pubitemid 40021480)
22. Aoki Y, Suemasu H, Ishikawa T (2007) Damage propagation in CFRP laminates subjected to low velocity impact and static indentation. Adv Mater 16(1):45-61 (Pubitemid 46384473)
23. Borg R, Nilsson L, Simonsson K (2004) Simulation of low velocity impact on fiber laminates using a cohesive zone based delamination model. Compos Sci Technol 64:279-288 (Pubitemid 37529348)
24. Ladeveze P, Lubineau G, Marsal D (2006) Towards a bridge between the micro- and mesomechanics of delamination for laminated composites. Compos Sci Technol 66:698-712 (Pubitemid 43329416)
25. Zhang Y, Zhu P, Lai X (2006) Finite element analysis of low-velocity impact damage in composite laminated plates. Mater Des 27:513-519 (Pubitemid 43033356)
26. Lammerant L, Verpoest I (1996) Modelling of the interaction between matrix cracks and delaminations during impact of composite plates. Compos Sci Technol 56:1171-1178
27. Tita V, Carvalho J, Vandepitte D (2008) Failure analysis of low velocity impact on thin composite laminates: experimental and numerical approaches. Compos Struct 83:413-428 (Pubitemid 351201869)
28. Johnson HE, Louca LA, Mouring S, Fallah AS (2009) Modelling impact damage in marine composite panels. Int J Imp Eng 36:25-39
29. Iannucci L, Willows ML (2006) An energy based damage mechanics approach to modelling impact onto woven composite materials - part I: numerical models. Compos Part A 37:2041-2056 (Pubitemid 44540354)
30. Iannucci L, Willows ML (2007) An energy based damage mechanics approach to modelling impact onto woven composite materials - part II: experimental and numerical results. Compos Part A 38:540-554 (Pubitemid 44848403)
31. Bouvet C, Castanié B, Bizeul M, Barrau JJ (2009) Low velocity impact modeling in laminate composite panels with discrete interface elements. Int J Sol Struct 46(14-15):2809-2821
32. Ha-Minh C, Kanit T, Boussu F, Abdellatif I (2011) Numerical multi-scale modeling for textile woven fabric against ballistic impact. Compos Mater Sci 50(7):2172-2184
33. Mi Y, Crisfield MA, Davies GAO (1998) Progressive delamination using interface elements. J Compos Mater 32(14):1246-1272 (Pubitemid 128619971)
34. Prombut P (2007) Caractérisation de la propagation de délaminage des stratifiés composites multidirectionnels. Thèse de doctorat, université de Toulouse
35. Prombut P, Michel L, Lachaud F, Barrau JJ (2006) Delamination of multidirectional composte laminates at 0i/thetai ply interfaces. Eng Fract Mech 7:2427-2442 (Pubitemid 44227774)
36. Raimondo L, Iannucci L, Robinson P, Curtis PT (2012) A progressive failure model for meshsize-independent FE analysis of composite laminates subject to low-velocity impact damage. Comp Sci Technol 72:624-632
37. Hashin Z, Rotem A (1973) A fatigue failure criterion for fiber-reinforced materials. J Compos Mater 7:448-464
38. Hashin Z (1980) Failure criteria for uni-directional fibre composites. J Appl Mech 47:329-334
39. Pinho ST, Robinson P, Iannucci L (2006) Fracture toughness of the tensile and compressive fibre failure modes in laminated composites. Compos Sci Technol 66:2069-2079 (Pubitemid 44109079)
40. Bazant ZP, Oh BH (1983) Progressive Carck and band theory for fracture of concrete. Mater Struct 16:155-177 (Pubitemid 13576166)
41. Lapczyk I, Hurtado JA (2007) Progressive damage modelling in fiber-reinforced materials. Compos Part A 38:2333-2341 (Pubitemid 350017079)
42. Shi Y, Swait T, Soutis C (2012) Modelling damage evolution in composite laminates subjected to low velocity impact. Comp Struct 94(9):2902-2913
43. Yang Q, Cox B (2005) Cohesive models for damage evolution in laminated composites. Int J Fract 133:107-137 (Pubitemid 40902818)
44. Pinho ST (2005) Modelling failure of laminated composites using physically-based failure models. PhD of the University of London
45. Guocai W, Jenn-Ming Y, Hahn HT (2007) The impact properties and damage tolerance of bi-directionally reinforced fiber metal laminates. J Mater Sci 42:948-957
46. Wardle BL, Lagace PA (1997) On the use of quasi-static testing to assess impact damage resistance of composite shell structures. J Reinf Plast Compos 16:1093-1110 (Pubitemid 127623783)
47. Chen P, Shen Z, Xiong J, Yang S, Fu S, Ye L (2006) Failure mechanisms of laminated composites subjected to static indentation. Compos Struct 75:489-495
48. Nettles AT, Douglas MJ (2002) A comparison of quasi-static indentation testing to low velocity impact testing. ASTM, Composite Materials: testing, design and acceptance criteria 1416: 116-130
49. Chang DC, Khetan RP (1997) Surface damage of steel, aluminium and chopped-fiber composite panels due to projectile impact. J Reinf Plast Compos 3:193-203
50. Caprino G, Langella A, Lopresto A (2003) Indentation and penetration of carbon fibre reinforced plastic laminates. Compos Part B 34:319-325
51. Fiedler B, Hojo M, Ochiai S, Schulte K, Ando M (2001) Failure behavior of an epoxy matrix under different kinds of static loading. Compos Sci Technol 61:1615-1624 (Pubitemid 32752942)
52. Abi Abdallah, Bouvet C, Rivallant S, Broll B, Barrau JJ (2009) Experimental analysis of damage creation and permanent indentation on highly oriented plates. Compos Sci Technol 69(7-8):1238-1245
53. HexPly M21 product data, Hexcel company, http://www.hexcel.com/Resources/ DataSheets/Prepreg-Data-Sheets/M21 global.pdf
54. Olsson R (2010) Analytical model for delamination growth during small mass impact on plates. Int J Sol Struct 47:2882-2892
55. IlyasM, Espinosa C, Lachaud F, Salaün M(2011) Modelling aeronautical composite laminates behaviour under impact using a saturation damage and delamination continuous material model. Key Eng Mater 452-3:369-372
56. Curtis J, Hinton MJ, Li S, Reid SR, Soden PD (2000) Damage, deformation and residual burst strength of filament-wound composite tubes subjected to impact or quasi-static indentation. Comp Part B 31:419-433
57. Belingardi G, Vadori R (2003) Influence of the laminate thickness in low velocity impact behavior of composite material plate. Compos Struct 61:27-38 (Pubitemid 36639812)
58. Sjoblom PO, Hartnes TJ, Cordell TM (1988) On low velocity impact testing of composite materials. J Compos Mater 22:30-52
59. Adam L, Bouvet C, Castanié B,Daidié A, Bonhomme E (2012) Discrete ply model of circular pull-through test of fasteners in laminates. Comp Struct 94(10):3082-3091