Tribocorrosion behaviour of anodic treated titanium surfaces intended for dental implants

Journal of Physics D: Applied Physics

Volumn 46, Issue 40, 2013, Pages

  Alves, A C ^a   Oliveira, F ^a   Wenger, F ^b   Ponthiaux, P ^b   Celis, J P ^c   Rocha, L A ^a,d  

^a Centre for Mechanical and Materials Technologies   (Portugal)

^b ECOLE CENTRALE PARIS   (France)

^c UNIVERSITY OF LEUVEN   (Belgium)

^d SÃO PAULO STATE UNIVERSITY UNESP   (Brazil)

Author keywords

[No Author keywords available]

Indexed keywords

ANODIZED MATERIAL; ANODIZING TREATMENT; BIOLOGICAL FLUIDS; COMMERCIAL PURE TITANIUM; CRYSTALLOGRAPHIC STRUCTURE; IMPLANT MATERIALS; METALLIC IMPLANTS; TITANIUM SURFACES;

BIOLOGICAL MATERIALS; CORROSION RESISTANCE; DENTAL PROSTHESES; ELECTROLYTES; MECHANICAL PROPERTIES; PHOSPHOLIPIDS; TITANIUM;

TITANIUM OXIDES;

EID: 84884575368     PISSN: 00223727     EISSN: 13616463     Source Type: Journal    
DOI: 10.1088/0022-3727/46/40/404001     Document Type: Article

References (35)

1. Barao V A, Mathew M T, Assunção W G, Yuan J C C, Wimmer M A and Sukotjo C 2012 Stability of cp-Ti and Ti-6Al-4V alloy for dental implants as a function of saliva pH - an electrochemical study Clin. Oral Implants Res. 23 1055-62
2. Barry M, Kennedy D, Keating K and Schauperl Z 2005 Design of dynamic test equipment for the testing of dental implants Mater. Design 26 209-16
3. Bloyce A, Qi P-Y, Dong H and Bell T 1998 Surface modification of titanium alloys for combined improvements in corrosion and wear resistance Surf. Coat. Technol. 107 125-32
4. Diomidis N, Celis J P, Ponthiaux P and Wenger F 2010 Tribocorrosion of stainless steel in sulfuric acid: identification of corrosion-wear components and effect of contact area Wear 269 93-103
5. Guastaldi F P, Yoo D, Marin C, Jimbo R, Tovar N, Zanetta-Barbosa D and Coelho P G 2013 Plasma treatment maintains surface energy of the implant surface and enhances osseointegration Int. J. Biomater. doi:10.1155/2013/354125
6. Hanawa T 2010 Biofunctionalization of titanium for dental implant Japan. Dental Sci. Rev. 46 93-101
7. Hanawa T, Asami K and Asaoka K 1998 Repassivation of titanium and surface oxide film regenerated in simulated bioliquid J. Biomed. Mater. Res. 40 530-8
8. Henry P, Takadoum J and Berçot P 2009 Tribocorrosion of 316L stainless steel and TA6V4 alloy in H2SO4 media Corros. Sci. 51 1308-14
9. Ishizawa H and Ogino M 1995 Formation and characterization of anodic titanium oxide films containing Ca and P J. Biomed. Mater. Res. 29 65-72
10. Kim K H and Ramaswamy N 2009 Electrochemical surface modification of titanium in dentistry Dental Mater. J. 28 20-36
11. Kolenbrander P E and London J 1993 Adhere today, here tomorrow: oral bacterial adherence J. Bacteriol. 175 3247-52
12. Kumar S, Narayanan T, Ganesh Sundara Raman S and Seshadri S 2010 Surface modification of CP-Ti to improve the fretting-corrosion resistance: thermal oxidation versus anodizing Mater. Sci. Eng. C 30 921-7
13. Kuromoto N K, Simão R A and Soares G A 2007 Titanium oxide films produced on commercially pure titanium by anodic oxidation with different voltages Mater. Charact. 58 114-21
14. Le Guéhennec L, Soueidan A, Layrolle P and Amouriq Y 2007 Surface treatments of titanium dental implants for rapid osseointegration Dental Mater. 23 844-54
15. Liu X, Chu P K and Ding C 2004 Surface modification of titanium, titanium alloys, and related materials for biomedical applications Mater. Sci. Eng. R 47 49-121
16. Mischler S 2008 Triboelectrochemical techniques and interpretation methods in tribocorrosion: a comparative evaluation Tribol. Int. 41 573-83
17. Neoh K G, Hu X, Zheng D and Kang E T 2012 Balancing osteoblast functions and bacterial adhesion on functionalized titanium surfaces Biomaterials 33 2813
18. Niinomi M 2008 Mechanical biocompatibilities of titanium alloys for biomedical applications J. Mech. Behavior Biomed. Mater. 1 30-42
19. Oliveira N C M, Moura C C G, Zanetta-Barbosa D, Mendonça D B S, Cooper L, Mendonça G and Dechichi P 2013 Effects of titanium surface anodization with CaP incorporation on human osteoblastic response Mater. Sci. Eng. C 33 1958-62
20. Pilliar R M, Sagals G, Meguid S A, Oyonarte R and Deporter D A 2006 Threaded versus porous-surfaced implants as anchorage units for orthodontic treatment: three-dimensional finite element analysis of peri-implant bone tissue stresses Int. J. Oral Maxillofacial Implants 21 879-89
21. Ponthiaux P, Wenger F, Drees D and Celis J P 2004 Electrochemical techniques for studying tribocorrosion processes Wear 256 459-68
22. Ramos-Saenz C, Sundaram P and Diffoot-Carlo N 2010 Tribological properties of Ti-based alloys in a simulated bone-implant interface with Ringer's solution at fretting contacts J. Mech. Behavior Biomed. Mater. 3 549-58
23. Rosa M B, Albrektsson T, Francischone C E, Schwartz Filho H O and Wennerberg A 2012 The influence of surface treatment on the implant roughness pattern J. Appl. Oral Sci. 20 550-5
24. Rungsiyakull C, Li Q, Sun G, Li W and Swain M V 2010 Surface morphology optimization for osseointegration of coated implants Biomaterials 31 7196-204
25. Saldaña L and Vilaboa N 2010 Effects of micrometric titanium particles on osteoblast attachment and cytoskeleton architecture Acta Biomater. 6 1649-60
26. Sargeant A and Goswami T 2006 Hip implants: V. Physiological effects Mater. Design 27 287-307
27. Souza J, Barbosa S, Ariza E, Celis J-P and Rocha L 2012 Simultaneous degradation by corrosion and wear of titanium in artificial saliva containing fluorides Wear 292-293 82-8
28. Souza J, Henriques M, Oliveira R, Teughels W, Celis J-P and Rocha L 2010 Do oral biofilms influence the wear and corrosion behavior of titanium? Biofouling 26 471-8
29. Sul Y T, Kang B S, Johansson C, Um H S, Park C J and Albrektsson T 2009 The roles of surface chemistry and topography in the strength and rate of osseointegration of titanium implants in bone J. Biomed. Mater. Res. 89A 942-50
30. Tsutsumi Y, Niinomi M, Nakai M, Tsutsumi H, Doi H, Nomura N and Hanawa T 2012 Micro-arc oxidation treatment to improve the hard-tissue compatibility of Ti-29Nb-13Ta-4.6 Zr alloy Appl. Surf. Sci. 262 34-8
31. Vieira A, Ribeiro A, Rocha L and Celis J 2006 Influence of pH and corrosion inhibitors on the tribocorrosion of titanium in artificial saliva Wear 261 994-1001
32. Yan Y, Neville A, Dowson D and Williams S 2006 Tribocorrosion in implants - assessing high carbon and low carbon Co-Cr-Mo alloys by in situ electrochemical measurements Tribol. Int. 39 1509-17
33. Yetim A 2010 Investigation of wear behavior of titanium oxide films, produced by anodic oxidation, on commercially pure titanium in vacuum conditions Surf. Coat. Technol. 205 1757-63
34. Zhu X, Kim K H and Jeong Y 2001 Anodic oxide films containing Ca and P of titanium biomaterial Biomaterials 22 2199-206
35. Zywitzki O, Modes T, Sahm H, Frach P, Goedicke K and Glöß D 2004 Structure and properties of crystalline titanium oxide layers deposited by reactive pulse magnetron sputtering Surf. Coat. Technol. 180 538-43.