Development of inkjet printed strain sensors

Smart Materials and Structures

Volumn 22, Issue 10, 2013, Pages

  Correia, V ^a   Caparros, C ^a,b   Casellas, C ^c   Francesch, L ^c   Rocha, J G ^a   Lanceros Mendez, S ^a  

^a UNIVERSITY OF MINHO   (Portugal)

^b UNIVERSITAT POLITÈCNICA DE CATALUNYA   (Spain)

^c CETEMMSA Technological Centre   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

CONDUCTIVE INK; INK-JET PRINTING TECHNOLOGIES; INTERDIGITATED STRUCTURE; PERFORMANCE TESTS; POLY-3 ,4-ETHYLENEDIOXYTHIOPHENE; SENSOR MATRIX; SINGLE SENSOR; STRAIN SENSORS;

INK;

SENSORS;

EID: 84884544152     PISSN: 09641726     EISSN: 1361665X     Source Type: Journal    
DOI: 10.1088/0964-1726/22/10/105028     Document Type: Article

References (32)

1. Ko S H, Pan H, Grigoropoulos C P, Luscombe C K, Fréchet J M J and Poulikakos D 2007 All-inkjet-printed flexible electronics fabrication on a polymer substrate by low-temperature high-resolution selective laser sintering of metal nanoparticles Nanotechnology 18 345202
2. Ko S H, Chung J, Pan H, Grigoropoulos C P and Poulikakos D 2007 Fabrication of multilayer passive and active electric components on polymer using inkjet printing and low temperature laser processing Sensors Actuators A 134 161-8
3. Mantysalo M, Pekkanen V, Kaija K, Niittynen J, Koskinen S, Halonen E, Mansikkamaki P and Hameenoja O 2009 Capability of inkjet technology in electronics manufacturing ECTC 2009: 59th Electronic Components and Technology Conf., 2009 pp 1330-6
4. Ando B and Baglio S 2011 Inkjet-printed sensors: a useful approach for low cost, rapid prototyping [Instrumentation Notes] IEEE Instrum. Meas. Mag. 14 36-40
5. Pacquit A, Frisby J, Diamond D, Lau K T, Farrell A, Quilty B and Diamond D 2007 Development of a smart packaging for the monitoring of fish spoilage Food Chem. 102 466-70
6. Leopold N, Busche S, Gauglitz G and Lendl B 2009 IR absorption and reflectometric interference spectroscopy (RIfS) combined to a new sensing approach for gas analytes absorbed into thin polymer films Spectrochim. Acta A 72 994-9
7. Spadavecchia J, Ciccarella G, Siciliano P, Capone S and Rella R 2004 Spin-coated thin films of metal porphyrin-phthalocyanine blend for an optochemical sensor of alcohol vapours Sensors Actuators B 100 88-93
8. Kale B B 2012 Ink-jet printed conducting polyaniline based flexible humidity sensor IMCS 2012: 14th Int. Mtg on Chemical Sensors pp 1112-5
9. Andò B, Baglio S, La Malfa S and Episcopo G L 2011 All inkjet printed system for strain measurement IEEE Sensors, 2011 pp 215-7
10. Abe K, Suzuki K and Citterio D 2008 Inkjet-printed microfluidic multianalyte chemical sensing paper Anal. Chem. 80 6928-34
11. Allain L R, Stratis-Cullum D N and Vo-Dinh T 2004 Investigation of microfabrication of biological sample arrays using piezoelectric and bubble-jet printing technologies Anal. Chim. Acta 518 77-85
12. Hasenbank M S, Edwards T, Fu E, Garzon R, Kosar T F, Look M, Mashadi-Hossein A and Yager P 2008 Demonstration of multi-analyte patterning using piezoelectric inkjet printing of multiple layers Anal. Chim. Acta 611 80-8
13. Chung S, Jang J, Cho J, Lee C, Kwon S-K and Hong Y 2011 All-inkjet-printed organic thin-film transistors with silver gate, source/drain electrodes Japan. J. Appl. Phys. 50 03CB05
14. Chung S, Kim S O, Kwon S-K, Lee C and Hong Y 2011 All-inkjet-printed organic thin-film transistor inverter on flexible plastic substrate IEEE Electron Device Lett. 32 1134-6
15. Alpuim P, Correia V, Marins E S, Rocha J G, Trindade I G and Lanceros-Mendez S 2011 Piezoresistive silicon thin film sensor array for biomedical applications Thin Solid Films 519 4574-7
16. Myers D R and Pisano A P 2009 Torque measurements of an automotive halfshaft utilizing a MEMS resonant strain gauge TRANSDUCERS 2009: Int. Solid-State Sensors, Actuators and Microsystems Conf., 2009 pp 1726-9
17. Erinc M, van de Wiel H J, Werkhoven R J, Pongracz A, Battistig G and Fischer H R 2011 Vibration characterization of a MEMS 3D force sensor EuroSimE: 12th Int. Conf. on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, 2011 pp 1/6-6/6
18. Pereira J N, Vieira P, Ferreira A, Paleo A J, Rocha J G and Lanceros-Méndez S 2012 Piezoresistive effect in spin-coated polyaniline thin films J. Polym. Res. 19 0-6
19. Ferrreira A, Rocha J G, Ansón-Casaos A, Martínez M T, Vaz F and Lanceros-Mendez S 2012 Electromechanical performance of poly(vinylidene fluoride)/carbon nanotube composites for strain sensor applications Sensors Actuators A 178 10-6
20. Costa P, Silva J, Sencadas V, Simoes R, Viana J and Lanceros- Méndez S 2013 Mechanical, electrical and electro-mechanical properties of thermoplastic elastomer styrene-butadiene-styrene/multiwall carbon nanotubes composites J. Mater. Sci. 48 1172-9
21. Ferreira A, Cardoso P, Klosterman D, Covas J A, van Hattum F W J, Vaz F and Lanceros-Mendez S 2012 Effect of filler dispersion on the electromechanical response of epoxy/vapor-grown carbon nanofiber composites Smart Mater. Struct. 21 075008
22. RS-Components 2012 Mild Steel Foil Strain Gauge available at: http://uk.rs-online.com/web/p/strain-gauges/0632168/
23. Lynch J P, Partridge A, Law K H, Kenny T W, Kiremidjian A S and Carryer E 2003 Design of piezoresistive MEMS-based accelerometer for integration with wireless sensing unit for structural monitoring J. Aerosp. Eng. 16 108-14
24. Sugiyama S, Kawahata K, Yoneda M and Igarashi I 1989 Tactile image detection using a 1 k-element silicon pressure sensor array Sensors Actuators A 22 397-400
25. ISO 2010 Implants for Surgery - Partial and Total Hip Joint Prostheses International Organization for Stardardization
26. U Fujifilm 2012 Dimatix DMP-2800 available at: www.fujifilmusa.com/ products/industrial-inkjet-printheads/index.html [accessed: 06-Oct-2012]
27. Starke E, Turke A, Krause M and Fischer W 2011 Flexible polymer humidity sensor fabricated by inkjet printing TRANSDUCERS 2011: 16th Int. Solid-State Sensors, Actuators and Microsystems Conf., 2011 pp 1152-5
28. Wang C-T, Huang K-Y, Lin D T W, Liao W-C, Lin H-W and Hu Y-C 2010 A flexible proximity sensor fully fabricated by inkjet printing Sensors (Basel) 10 5054-62
29. Paleo A J, Hattum F W J, Rocha J G and Lanceros-Méndez S 2012 Piezoresistive polypropylene-carbon nanofiber composites as mechanical transducers Microsyst. Technol. 18 591-7
30. Chang F-C, Hung J-P and Lai Y-L 2009 Finite element analysis on the mechanical effect of a roughened stem for cemented hip prosthesis 2009 WRI World Congr. on Computer Science and Information Engineering vol 3 pp 254-8
31. Park J B 1999 Hip joint prosthesis fixation-problems and possible solutions The Biomedical Engineering Handbook 2nd edn ed J D Bronzino (Boca Raton, FL: CRC Press)
32. Pramanik S, Agarwal A K and Rai K N 2005 Chronology of total hip joint replacement and materials development Trends Biomater. Artif. Organs 19 15-26