Support vector machines applied to uniaxial compressive strength prediction of jet grouting columns

Computers and Geotechnics

Volumn 55, Issue , 2014, Pages 132-140

  Tinoco, Joaquim ^a   Gomes Correia, A ^a   Cortez, Paulo ^a  

^a UNIVERSITY OF MINHO   (Portugal)

Author keywords

Data mining; Jet grouting; Sensitivity analysis; Soft soil; Soil cement mixtures; Soil improvement; Support vector machines; Uniaxial compressive strength

Indexed keywords

JET GROUTING; SOFT-SOIL; SOIL IMPROVEMENT; SOIL-CEMENT MIXTURES; UNIAXIAL COMPRESSIVE STRENGTH;

CIVIL ENGINEERING; COMPRESSIVE STRENGTH; CONCRETE CONSTRUCTION; DATA MINING; FORECASTING; GEOTECHNICAL ENGINEERING; GROUTING; MIXTURES; MORTAR; SENSITIVITY ANALYSIS; SOIL CEMENT; SOILS;

SUPPORT VECTOR MACHINES;

ALGORITHM; CEMENT; COLUMN; COMPRESSIVE STRENGTH; DATA MINING; GROUTING; SENSITIVITY ANALYSIS; SOFT SOIL; SOIL IMPROVEMENT; UNIAXIAL STRENGTH;

EID: 84884335176     PISSN: 0266352X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compgeo.2013.08.010     Document Type: Article

References (50)

1. Fayyad U., Piatetsky-Shapiro G., Smyth P. The KDD process for extracting useful knowledge from volumes of data. Commun ACM 1996, 39(11):27-34.
2. Domingos P. A few useful things to know about machine learning. Commun ACM 2012, 55(10):78-87.
3. Liao K., Fanb J., Huangb C. An artificial neural network for groutability prediction of permeation grouting with microfine cement grouts. Comput Geotech 2011, 38(8):978-986.
4. Samui P. Support vector machine applied to settlement of shallow foundations on cohesionless soils. Comput Geotech 2008, 35(3):419-427.
5. Zhao H. Slope reliability analysis using a support vector machine. Comput Geotech 2008, 35(3):459-467.
6. Lai S., Serra M. Concrete strength prediction by means of neural network. Construct Build Mater 1997, 11(2):93-98.
7. Prasad B., Eskandari H., Reddy B. Prediction of compressive strength of SCC and HPC with high volume fly ash using ANN. Construct Build Mater 2009, 23(1):117-128.
8. Miranda T., Correia A., Santos M., Sousa L., Cortez P. New models for strength and deformability parameter calculation in rock masses using data-mining techniques. Int J Geomech 2011, 11:44-58.
9. Goh A., Goh S. Support vector machines: their use in geotechnical engineering as illustrated using seismic liquefaction data. Comput Geotech 2007, 34(5):410-421.
10. Erzin Y. Artificial neural networks approach for swell pressure versus soil suction behaviour. Can Geotech J 2007, 44(10):1215-1223.
11. Tinoco J., Gomes Correia A., Cortez P. Using data mining techniques to predict deformability properties of jet grouting laboratory formulations over time. Progr Artif Intell 2011, 7026:491-505.
12. Khatibinia M., Fadaee M., Salajegheh J., Salajegheh E. Seismic reliability assessment of rc structures including soil-structure interaction using wavelet weighted least squares support vector machine. Reliability Engineering & System Safety 2013, 110:22-33.
13. Tan Xh., Bi Wh., Hou Xl., Wang W. Reliability analysis using radial basis function networks and support vector machines. Comput Geotech 2011, 38(2):178-186.
14. Kovačević M., Bajat B., Gajić B. Soil type classification and estimation of soil properties using support vector machines. Geoderma 2010, 154(3):340-347.
15. Falcão J, Pinto A, Pinto F. Case histories of ground improvement solutions using jet-grouting. Geotechnical News; Tecnasol FGE: Fundações e Geotecnia S.A; 2000.
16. Gazzarrini P, Kokan M, Jungaro S. Case history of jet grouting in british columbia. underpinning of CN rail tunnel in North Vancouver. Geotechnical News; The Grout Line; 2005.
17. Liu S.Y., Zhang D.W., Liu Z.B., Deng Y.F. Assessment of unconfined compressive strength of cement stabilized marine clay. Marine Georesour Geotechnol 2008, 26(1):19-35.
18. Xanthakos P., Abramson L., Bruce D. Ground control and improvement 1994, Wiley-Interscience, ISBN 0471552313.
19. Nikbakhtan B., Ahangari K., Rahmani N. Estimation of jet grouting parameters in Shahriar Dam, Iran. Min Sci Technol 2010, 20(3):472-477.
20. Padura A., Sevilla J., Navarro J., Bustamante E., Crego E. Study of the soil consolidation using reinforced jet grouting by geophysical and geotechnical techniques. Construct Build Mater 2009, 23(3):1389-1400.
21. Welsh J., Burke G. Jet grouting: uses for soil improvement. Geotech Eng Cong (GSP N27) 1991, 334-345.
22. Gazaway H, Jasperse B. Jet grouting in contaminated soils. In: Grouting, soil improvement and geosynthetics (GSP 30). New Orleans (LA, USA): ASCE; 1992. p. 206-14.
23. Croce P., Flora A. Analysis of single-fluid jet grouting. Geotechnique 2001, 50(6):739-748.
24. Kirsch F, Sondermann W. Ground improvement and its numerical analysis. In: Proceedings of the international conference on soil mechanics and geotechnical engineering, vol. 3. AA Balkema Publishers; 2001. p. 1775-8.
25. Tinoco J, Gomes Correia A, Cortez P. Application of a sensitivity analysis procedure to interpret uniaxial compressive strength prediction of jet grouting laboratory formulations performed by svm model. In: Huybrechts NDN, editor. International symposium & short courses. Brussels, Belgium; 2012. p. 317-26.
26. Lee F., Lee Y., Chew S., Yong K. Strength and modulus of marine clay-cement mixes. J Geotech Geoenviron Eng 2005, 131(2):178-186.
27. Narendra B., Sivapullaiah P., Suresh S., Omkar S. Prediction of unconfined compressive strength of soft grounds using computational intelligence techniques: a comparative study. Comput Geotech 2006, 33(3):196-208.
28. Tinoco J., Gomes Correia A., Cortez P. Application of data mining techniques in the estimation of the uniaxial compressive strength of jet grouting columns over time. Construct Build Mater 2011, 25(3):1257-1262.
29. Cortez P., Embrechts M. Using sensitivity analysis and visualization techniques to open black box data mining models. Inform Sci 2013, 225:1-17.
30. Tinoco J., Gomes Correia A., Cortez P. Uniaxial compressive strength prediction of jet grouting columns using support vector machines. ESM - The Euro Simul Model Conf 2011, 326-330. Guimarães, EUROSIS, Portugal.
31. Tinoco J., Gomes Correia A., Cortez P. Jet grouting mechanicals properties prediction using data mining techniques. 4th International conference on grouting and deep mixing. New Orleans 2012, 2082-2091. ASCE, LA, USA.
32. Chen Y., Councill I. An introduction to support vector machines: a review. AI Magaz 2003, 24(2):105-107.
33. Cortez P. Data mining with neural networks and support vector machines using the R/rminer tool. 10th Industrial conference on data mining, advances in data mining: applications and theoretical aspects 2010, 572-583. Springer, Berlin, Germany: LNAI 617.
34. Cherkassky V., Ma Y. Practical selection of SVM parameters and noise estimation for SVM regression. Neural Netw 2004, 17(1):113-126.
35. Huang C., Lee Y., Lin D., Huang S. Model selection for support vector machines via uniform design. Comput Stat Data Anal 2007, 52(1):335-346.
36. Cortes C., Vapnik V. Support vector networks. Machine Learning 1995, 20(3):273-297.
37. Smola A. Regression estimation with support vector learning machines. Master's thesis. Technische Universit at Munchen; Munchen, Germany; 1996.
38. Smola A., Schölkopf B. A Tutorial on Support Vector Regression. Statistics and Computing 2004, 14(3):199-222.
39. Hamel L. Knowledge Discovery with Support Sector Machines 2009, Wiley-Interscience, ISBN 0470371927.
40. Cortez P., Portelinha M., Rodrigues S., Cadavez V., Teixeira A. Lamb Meat Quality Assessment by Support Vector Machines. Neural Processing Letters 2006, 24(1):41-51.
41. Momma M, Bennett K. A pattern search method for model selection of support vector regression. In: Proceedings of the SIAM international conference on data mining. Arizona, USA: Philadelphia: SIAM; 2002. p. 261-74.
42. Frohlich H., Zell A. Efficient parameter selection for support vector machines in classification and regression via model-based global optimization. Proceedings of the International Joint Conference on Neural Networks (IJCNN'05) 2005, vol. 3:1431-1436. IEEE, Montréal, Québec, Canada.
43. Hastie T., Tibshirani R., Friedman J. The Elements of Statistical Learning: Data Mining, Inference, and Prediction 2009, Springer-Verlag, New York. second edition ed.
44. R. Team. R: a language and environment for statistical computing. Viena Austria: R Foundation for Statistical Computing; 2008.
45. Bi J., Bennett K. Regression error characteristic curves. Proceedings of the twentieth international conference on machine learning 2003, 43-50. AAAI Press, Washington, DC, USA.
46. Gomes Correia A, Valente T, Tinoco J, Falção J, Barata J, Cebola D, et al. Evaluation of mechanical properties of jet grouting columns using different test methods. In: 17th International conference on soil mechanics and geotechnical engineering (17th ICSMGE). Alexandria, Egypt: IOS Press; 2009. p. 2169-71.
47. Shibazaki M. State of practice of jet grouting. In: Grouting and ground treatment: proceedings of 3rd international specialty conference on grouting and ground treatment. New Orleans, Louisiana, USA: ASCE; 2004. p. 198-217.
48. Tinoco J. Application of data mining techniques to jet grouting columns design. Ph.D. thesis. Guimarães, Portugal: School of Engineering, University of Minho; 2012.
49. CEN,. Eurocode 2: Design of concrete structures - part 1-1: general rules and rules for buildings. Brussels: European Committee for Standardization; 2004.
50. Van Impe W, Verástegui Flores R, Mengé P, Van den Broeck M. Considerations on laboratory test results of cement stabilised sludge. In: Deep mixing '05: 1st international conference on deep mixing - best practice and recent advances; 2005. p. 163-8.