Accurate measurement of concurrent flexion-extension and internal-external rotations in smart knee prostheses

IEEE Transactions on Biomedical Engineering

Volumn 60, Issue 9, 2013, Pages 2504-2510

  Arami, Arash ^a   Vallet, Axelle ^a   Aminian, Kamiar ^a  

^a EPFL   (Switzerland)

Author keywords

Anisotropic magneto resistive (AMR) sensors; input selection; instrumented prosthesis; knee rotations

Indexed keywords

ANISOTROPY; ARTIFICIAL LIMBS; ERRORS; KNEE PROSTHESES; MAGNETOS; MEASUREMENTS; NEURAL NETWORKS; PHYSIOLOGICAL MODELS; REGRESSION ANALYSIS; ROTATION; SENSORS;

ACCURATE MEASUREMENT; DYNAMIC MEASUREMENT; INPUT SELECTION; LINEAR REGRESSION MODELS; MEASUREMENT SYSTEM; MOTION CAPTURE SYSTEM; SENSOR CONFIGURATIONS; STEREOPHOTOGRAMMETRY;

ESTIMATION;

ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE; POLYETHYLENE;

ABDUCTION; ADDUCTION; ANISOTROPIC MAGNETO RESISTIVE SENSOR; ARTICLE; ARTIFICIAL NEURAL NETWORK; FLEXION EXTENSION ROTATION; INTERNAL EXTERNAL ROTATION; KNEE FUNCTION; KNEE PROSTHESIS; MAGNETIC FIELD; ROTATION; SENSITIVITY ANALYSIS; SENSOR; SIMULATOR; STEREOPHOTOGRAMMETRY; TOTAL KNEE REPLACEMENT; WIRELESS COMMUNICATION; ANATOMY AND HISTOLOGY; AUDIOVISUAL EQUIPMENT; HUMAN; JOINT CHARACTERISTICS AND FUNCTIONS; KNEE; MAGNET; PHOTOGRAPHY; PHYSIOLOGY; PROSTHESIS; REPRODUCIBILITY; STATISTICAL MODEL; THEORETICAL MODEL;

HUMANS; KNEE JOINT; KNEE PROSTHESIS; LINEAR MODELS; MAGNETS; MODELS, ANATOMIC; MODELS, THEORETICAL; NEURAL NETWORKS (COMPUTER); PHOTOGRAMMETRY; POLYETHYLENE; PROSTHESIS DESIGN; RANGE OF MOTION, ARTICULAR; REPRODUCIBILITY OF RESULTS;

EID: 84883011967     PISSN: 00189294     EISSN: 15582531     Source Type: Journal    
DOI: 10.1109/TBME.2013.2259489     Document Type: Article

References (36)

1. A. J. Carr, O. Robertsson, S. Graves, A. J. Price, N. K. Arden, A. Judge, andD. J.Beard, "Knee replacement," Lancet, vol. 379, no. 9823, pp. 1331-1340, Apr. 2012.
2. J. J. Eng and D. A. Winter, "Kinetic analysis of the lower limbs during walking: What information can be gained from a three-dimensional model?," J. Biomech., vol. 28, no. 6, pp. 753-758, 1995.
3. N. Doriot and L. Ch̀eze, "A three-dimensional kinematic and dynamic study of the lower limb during the stance phase of gait using an homogeneous matrix approach," IEEE Trans. Biomed. Eng., vol. 51, no. 1, pp. 21-27, Jan. 2004. (Pubitemid 38009959)
4. R.Dumas, R.Aissaoui, and J. A. de Guise, "A 3D generic inverse dynamic method using wrench notation and quaternion algebra," Comput. Meth. Biomech. Biomed. Eng., vol. 7, no. 3, pp. 159-166, 2004.
5. R. Dumas and L. Ch̀eze, "3D inverse dynamics in non-orthonormal segment coordinate system," Med. Bio. Eng. Comput., vol. 45, no. 3, pp. 315-322, 2007. (Pubitemid 46359455)
6. A. Leardini, L. Chiari, U. Della Croce, and A. Cappozzo, "Human movement analysis using stereophotogrammetry Part 3. Soft tissue artifact assessment and compensation," Gait Posture, vol. 21, pp. 212-225, 2005. (Pubitemid 41556840)
7. D. L. Benoit, D. K. Ramsey, M. Lamontagne, L. Xu, P. Wretenberg, and P. Renstrom, "Effect of skin movement artifact on knee kinematics during gait and cutting motions measured in vivo," Gait Posture, vol. 24, no. 2, pp. 152-164, 2006. (Pubitemid 44332252)
8. J. Favre, B. M. Jolles, R. Aissaoui, and K. Aminian, "Ambulatory measurement of 3D knee joint angle," J. Biomech., vol. 41, pp. 1029-1035, 2008.
9. H. Dejnabadi, B. M. Jolles, and K Aminian, "A new approach to accurate measurement of uniaxial joint angles based on a combination of accelerometers and gyroscopes," IEEE Trans. Biomed. Eng., vol. 52, no. 8, pp. 1478-1484, Aug. 2005. (Pubitemid 41169542)
10. L. Kun, Y. Inoue, K. Shibata, and C. Enguo, "Ambulatory estimation of knee-joint kinematics in anatomical coordinate system using accelerometers and magnetometers," IEEE Trans. Biomed. Eng., vol. 58, no. 2, pp. 435-442, Feb. 2011.
11. S. Bonnet and R. H́eliot, "A magnetometer-based approach for studying human movements," IEEE Trans. Biomed. Eng., vol. 54, no. 7, pp. 1353-1355, Jul. 2007. (Pubitemid 46956955)
12. D. Roetenberg, P. J. Slycke, and P. H. Veltink, "Ambulatory position and orientation tracking fusing magnetic and inertial sensing," IEEE Trans. Biomed. Eng., vol. 54, no. 5, pp. 883-890, May 2007. (Pubitemid 46628581)
13. S. Ganjikia, N. Duval, L. H. Yahia, and J. de Guise, "Three- dimensional knee analyzer validation by simple fluoroscopic study," Knee, vol. 7, pp. 221-231, 2000.
14. J. Favre, R. Aissaoui, B. M. Jolles, J. A. De Guise, and K. Aminian, "Functional calibration procedure for 3D knee joint angle description using inertial sensors," J. Biomech., vol. 42, pp. 2330-2335, 2009.
15. M. A. Lafortune, P. R. Cavanagh, H. J. Sommer, and A. Kalenak, "Threedimensional kinematics of the human knee during walking," J. Biomech., vol. 25, no. 4, pp. 347-357, 1992.
16. C. Trozzi, B. L. Kaptein, E. H. Garling, T. Shelyakova, A. Russo, L. Bragonzoni, and S. Martelli, "Precision assessment of model-based RSAfor a total knee prosthesis in a biplanar set-up," knee, vol. 15, pp. 396-402, 2008.
17. I. Kutzner, B. Heinlein, F. Graichen, A. Bender, A. Rohlmann, A. Halder, A. Beier, and G. Bergmann, "Loading of the knee joint during activities of daily living measured in vivo in five subjects," J. Biomech., vol. 43, pp. 2164-2173, 2010.
18. D. D. D'Lima, N. Steklov, S. Patil, and C. W. Colwell, "In vivo knee forces during recreation and exercise after knee arthroplasty," Clin. Orthop. Related Res., vol. 466, pp. 2605-2611, 2008.
19. D. Crescini, E. Sardini, and M. Serpelloni, "Design and test of an autonomous sensor for force measurements in human knee implants," Sens. Actuators A Phys., vol. 166, pp. 1-8, 2011.
20. S. Almouahed, M. Gouriou, C. Hamitouche, E. Stindel, and C. Roux, "Design and evaluation of instrumented smart knee implant," IEEE Trans. Biomed. Eng., vol. 58, no. 4, pp. 971-982, Apr. 2011.
21. A. Arami et al., "Instrumented knee prosthesis for force and kinematics measurements," IEEE Trans. Autom. Sci. Eng., to be published. Available: http://ieeexplore.ieee.org/xpls/abs-all.jsp?arnumber=6410368=1. DOI:10.1109/TASE.2012.2226030.
22. A. Arami, J. Miehlbradt, and K. Aminian, "Accurate internal-external rotation measurement in total knee prostheses: A magnetic solution," J. Biomech., vol. 45, pp. 2023-2027, 2012.
23. B. M. Jolles et al., "A randomised controlled clinical trial and gait analysis of fixed-and mobile-bearing total knee replacements with a five-year follow-up," J. Bone Joint Surg. Br., vol. 94, pp. 648-655, 2012.
24. T. P. Andriacchi, J. O. Galante, and R. W. Fermier, "The influence of total knee-replacement design on walking and stair-climbing," J. Bone Joint Surg. Amer., vol. 64, no. 9, pp. 1328-1335, 1982. (Pubitemid 13169602)
25. S. Bhan, R. Malhotra, E. K. Kiran, S. Shukla, and M. Bijjawara, "A comparison of fixed-bearing and mobile-bearing total knee arthroplasty at a minimum follow-up of 4.5 years," J. Bone Joint Surg. Amer., vol. 87, no. 10, pp. 2290-2296, 2005. (Pubitemid 41407556)
26. J. Goodfellowand J. O'Conner, "The mechanics of the knee and prosthesis design," J. Bone Joint Surg. Br., vol. 60-B, no. 3, pp. 358-369, 1978.
27. F. M. Khaw, L. M. Kirk, and P. J. Gregg, "Survival analysis of cemented press-fit condylar total knee arthroplasty," J. Arthroplasty, vol. 16, pp. 161-167, 2001. (Pubitemid 32163842)
28. A. L̈adermann, A. L̈ubbeke, R. Stern, N. Riand, and D. Fritschy, "Fixedbearing versus mobile-bearing total knee arthroplasty: A prospective randomized, clinical and radiological study with mid-term results at 7 years," knee, vol. 15, pp. 206-210, 2008.
29. A.Vasdev, S.Kumar,G. Chadha, and S. P. Mandal, "Fixed- versusmobilebearing total knee arthroplasty in Indian patients," J. Orthop. Surg., vol. 17, no. 2, pp. 179-182, 2009.
30. A. Barre, J.-P. Thiran, B. M. Jolles, N. Theumann, and K. Aminian, "Soft tissue artifact assessment during treadmill walking in subjects with total knee arthroplasty," IEEE Trans. Biomed. Eng., submitted for publication.
31. O. Nelles, Nonlinear System Identification. New York, NY, USA. Springer-Verlag, 2001.
32. R. Battiti, "Using mutual information for selecting features in supervised neural net learning," IEEE Trans. Neural Netw., vol. 5, no. 4, pp. 537-550, Jul. 1994.
33. H. Peng, F. Long, and C. Ding, "Feature selection based on mutual information: Criteria of max-dependency, max-relevance and minredundancy," IEEE Trans. Pattern Anal. Mach. Intell., vol. 27, no. 8, pp. 1226-1238, Aug. 2005. (Pubitemid 41245053)
34. F. Graichen, R. Arnold, A. Rohlmann, and G. Bergmann, "Implantable 9-channel telemetry system for in vivo load measurements with orthopedic implants," IEEE Trans. Biomed. Eng., vol. 54, no. 2, pp. 253-261, Feb. 2007. (Pubitemid 46188168)
35. O. Atasoy and C. Dehollain, "A study for remote powering of a knee prosthesis through inductive link," presented at the Conf. Ph.D. Res. Microelectronics Electron., Berlin, Germany, Jul. 2010.
36. S. Ali, S. Tanner, and P.-A. Farine, "A novel 1-volt, 24-?W sigma delta modulator with 10-kHz bandwidth and 64.7 dB peak SNDR," presented at the 17th Int. Conf. Electron., Circuits, Syst., Athens, Greece, Dec. 2010.