메뉴 건너뛰기




Volumn 53, Issue , 2014, Pages 662-672

Hot deformation and optimization of process parameters of an as-cast 6Mo superaustenitic stainless steel: A study with processing map

Author keywords

Hot compression; Process parameter; Processing map; Superaustenitic stainless steel

Indexed keywords

COMPRESSION TESTING; DEFORMATION; DYNAMIC RECRYSTALLIZATION; HOT PRESSING; LASER BEAM WELDING; STRAIN RATE;

EID: 84882669817     PISSN: 02641275     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2013.07.065     Document Type: Article
Times cited : (86)

References (46)
  • 1
    • 34548579032 scopus 로고    scopus 로고
    • Cyclic deformation and phase transformation of 6Mo superaustenitic stainless steel
    • Wang S.H., Wu C.C., Chen C.Y., Yang J.R., Chiu P.K., Fang J. Cyclic deformation and phase transformation of 6Mo superaustenitic stainless steel. Metals Mater Int 2007, 13:275-283.
    • (2007) Metals Mater Int , vol.13 , pp. 275-283
    • Wang, S.H.1    Wu, C.C.2    Chen, C.Y.3    Yang, J.R.4    Chiu, P.K.5    Fang, J.6
  • 2
    • 84873524769 scopus 로고    scopus 로고
    • Phase transformations and mechanical properties in heat treated superaustenitic stainless steels
    • Koutsoukis T., Redjaïmia A., Fourlaris G. Phase transformations and mechanical properties in heat treated superaustenitic stainless steels. Mater Sci Eng, A 2013, 561:477-485.
    • (2013) Mater Sci Eng, A , vol.561 , pp. 477-485
    • Koutsoukis, T.1    Redjaïmia, A.2    Fourlaris, G.3
  • 3
    • 33846864711 scopus 로고    scopus 로고
    • Inverse effect of strain rate on mechanical behavior and phase transformation of superaustenitic stainless steel
    • Wu C.C., Wang S.H., Chen C.Y., Yang J.R., Chiu P.K., Fang J. Inverse effect of strain rate on mechanical behavior and phase transformation of superaustenitic stainless steel. Scripta Mater 2007, 56:717-720.
    • (2007) Scripta Mater , vol.56 , pp. 717-720
    • Wu, C.C.1    Wang, S.H.2    Chen, C.Y.3    Yang, J.R.4    Chiu, P.K.5    Fang, J.6
  • 4
    • 77956393279 scopus 로고    scopus 로고
    • Fracture toughness of heat-treated superaustenitic stainless steels
    • Muller C., Scott Chumbley L. Fracture toughness of heat-treated superaustenitic stainless steels. JMEPEG 2010, 19:714-720.
    • (2010) JMEPEG , vol.19 , pp. 714-720
    • Muller, C.1    Scott Chumbley, L.2
  • 5
    • 33847674862 scopus 로고    scopus 로고
    • Influence of pH on the passivation behavior of254SMOstainless steel in 3.5% NaCl solution
    • Liu C.T., Wu J.K. Influence of pH on the passivation behavior of254SMOstainless steel in 3.5% NaCl solution. Corros Sci 2007, 49:2198-2209.
    • (2007) Corros Sci , vol.49 , pp. 2198-2209
    • Liu, C.T.1    Wu, J.K.2
  • 6
    • 0036887394 scopus 로고    scopus 로고
    • The transpassive dissolution mechanism of highly alloyed stainless steels: I. Experimental results and modelling procedure
    • Betova Iva, Bojinov Martin, Laitinen Timo, Mäkelä Kari, Pohjanne Pekka, Saario Timo The transpassive dissolution mechanism of highly alloyed stainless steels: I. Experimental results and modelling procedure. Corros Sci 2002, 44:2675-2697.
    • (2002) Corros Sci , vol.44 , pp. 2675-2697
    • Betova, I.1    Bojinov, M.2    Laitinen, T.3    Mäkelä, K.4    Pohjanne, P.5    Saario, T.6
  • 7
    • 79951579165 scopus 로고    scopus 로고
    • Effect of the semi-conductive properties of the passive layer on the current provided by stainless steel microbial cathodes
    • Pons Liz, Délia Marie-Line, Basséguy Régine, Bergel Alain Effect of the semi-conductive properties of the passive layer on the current provided by stainless steel microbial cathodes. Electrochim Acta 2011, 56:2682-2688.
    • (2011) Electrochim Acta , vol.56 , pp. 2682-2688
    • Pons, L.1    Délia, M.-L.2    Basséguy Régine3    Bergel, A.4
  • 8
    • 33746894601 scopus 로고    scopus 로고
    • Constitutive flow behaviour of austenitc stainless steel under hot deformation: artificial neural network modelling to understand, evaluate and predict
    • Mandal Sumantra, Sivaprasad P.V., Venugopal S., Murthy K.P.N. Constitutive flow behaviour of austenitc stainless steel under hot deformation: artificial neural network modelling to understand, evaluate and predict. Modell Simul Mater Sci Eng 2006, 14:1063-1070.
    • (2006) Modell Simul Mater Sci Eng , vol.14 , pp. 1063-1070
    • Mandal, S.1    Sivaprasad, P.V.2    Venugopal, S.3    Murthy, K.P.N.4
  • 9
    • 70350606060 scopus 로고    scopus 로고
    • Dynamic recrystallization behavior of a Fe-Cr-Ni super-austenitic stainless steel
    • Asli A.H., Zarei-Hanzaki A. Dynamic recrystallization behavior of a Fe-Cr-Ni super-austenitic stainless steel. J Mater Sci Technol 2009, 25:603-606.
    • (2009) J Mater Sci Technol , vol.25 , pp. 603-606
    • Asli, A.H.1    Zarei-Hanzaki, A.2
  • 10
    • 75449087689 scopus 로고    scopus 로고
    • Hot deformation behavior and microstructural evolution of a superaustenitic stainless steel
    • Momeni A., Dehghani K., Keshmiri H., Ebrahimi G.R. Hot deformation behavior and microstructural evolution of a superaustenitic stainless steel. Mater Sci Eng, A 2010, 527:1605-1611.
    • (2010) Mater Sci Eng, A , vol.527 , pp. 1605-1611
    • Momeni, A.1    Dehghani, K.2    Keshmiri, H.3    Ebrahimi, G.R.4
  • 11
    • 79961167473 scopus 로고    scopus 로고
    • Dynamic recrystallization behavior of a superaustenitic stainless steel containing 16%Cr and 25%Ni
    • Ebrahimi G.R., Keshmiri H., Momeni A., Mazinani M. Dynamic recrystallization behavior of a superaustenitic stainless steel containing 16%Cr and 25%Ni. Mater Sci Eng, A 2011, 528:7488-7493.
    • (2011) Mater Sci Eng, A , vol.528 , pp. 7488-7493
    • Ebrahimi, G.R.1    Keshmiri, H.2    Momeni, A.3    Mazinani, M.4
  • 12
    • 84872555740 scopus 로고    scopus 로고
    • Deformation behavior and microstructural evolution of as-cast 904L austenitic stainless steel during hot compression
    • Han Y., Liu G.W., Zou D.N., Liu R., Qiao G.J. Deformation behavior and microstructural evolution of as-cast 904L austenitic stainless steel during hot compression. Mater Sci Eng, A 2013, 565:342-350.
    • (2013) Mater Sci Eng, A , vol.565 , pp. 342-350
    • Han, Y.1    Liu, G.W.2    Zou, D.N.3    Liu, R.4    Qiao, G.J.5
  • 13
    • 76549112993 scopus 로고    scopus 로고
    • Hot deformation and processing maps of extruded ZE41A magnesium alloy
    • Anbuselvan S., Ramanathan S. Hot deformation and processing maps of extruded ZE41A magnesium alloy. Mater. Des. 2010, 31:2319-2323.
    • (2010) Mater. Des. , vol.31 , pp. 2319-2323
    • Anbuselvan, S.1    Ramanathan, S.2
  • 14
    • 84869883035 scopus 로고    scopus 로고
    • Hot deformation and processing map of a typical Al-Zn-Mg-Cu alloy
    • Lin Y.C., Li Lei-Ting, Xia Yu-Chi, Jiang Yu-Qiang Hot deformation and processing map of a typical Al-Zn-Mg-Cu alloy. J Alloys Compd 2013, 550:438-445.
    • (2013) J Alloys Compd , vol.550 , pp. 438-445
    • Lin, Y.C.1    Li, L.-T.2    Xia, Y.-C.3    Jiang, Y.-Q.4
  • 15
    • 0032023533 scopus 로고    scopus 로고
    • Processing maps for hot working of titanium alloys
    • Prasad Y.V.R.K., Seshacharyulu T. Processing maps for hot working of titanium alloys. Mater Sci Eng, A 1998, 243:82-88.
    • (1998) Mater Sci Eng, A , vol.243 , pp. 82-88
    • Prasad, Y.V.R.K.1    Seshacharyulu, T.2
  • 17
    • 79551477953 scopus 로고    scopus 로고
    • Investigation on hot deformation behavior of 00Cr23Ni4N duplex stainless steel under medium-high strain rates
    • Han Y., Zou D.N., Chen Z.Y., Fan G.W., Zhang W. Investigation on hot deformation behavior of 00Cr23Ni4N duplex stainless steel under medium-high strain rates. Mater Charact 2011, 62:198-203.
    • (2011) Mater Charact , vol.62 , pp. 198-203
    • Han, Y.1    Zou, D.N.2    Chen, Z.Y.3    Fan, G.W.4    Zhang, W.5
  • 18
    • 77954815277 scopus 로고    scopus 로고
    • Characterization of hot deformation behavior of 410 martensitic stainless steel using constitutive equations and processing maps
    • Momeni A., Dehghani K. Characterization of hot deformation behavior of 410 martensitic stainless steel using constitutive equations and processing maps. Mater Sci Eng, A 2010, 527:5467-5473.
    • (2010) Mater Sci Eng, A , vol.527 , pp. 5467-5473
    • Momeni, A.1    Dehghani, K.2
  • 19
    • 84862981730 scopus 로고    scopus 로고
    • Optimization of processing parameters based on high temperature flow behavior and microstructural evolution of a nitrogen enhanced 316L(N) stainless steel
    • Samantaray D., Mandal S., Kumar V., Albert S.K., Bhaduri A.K., Jayakumar T. Optimization of processing parameters based on high temperature flow behavior and microstructural evolution of a nitrogen enhanced 316L(N) stainless steel. Mater Sci Eng, A 2012, 552:236-244.
    • (2012) Mater Sci Eng, A , vol.552 , pp. 236-244
    • Samantaray, D.1    Mandal, S.2    Kumar, V.3    Albert, S.K.4    Bhaduri, A.K.5    Jayakumar, T.6
  • 20
    • 22944482160 scopus 로고    scopus 로고
    • Identification of flow instabilities in the processing maps of AISI 304 stainless steel
    • Murty S.V.S.N., Rao B.N., Kashyap B.P. Identification of flow instabilities in the processing maps of AISI 304 stainless steel. J Mater Process Technol 2005, 166:268-278.
    • (2005) J Mater Process Technol , vol.166 , pp. 268-278
    • Murty, S.V.S.N.1    Rao, B.N.2    Kashyap, B.P.3
  • 21
    • 0347657027 scopus 로고    scopus 로고
    • Processing maps: a status report
    • Prasad Y.V.R.K. Processing maps: a status report. JMEPEG 2003, 12:638-645.
    • (2003) JMEPEG , vol.12 , pp. 638-645
    • Prasad, Y.V.R.K.1
  • 22
    • 79251648020 scopus 로고    scopus 로고
    • A critical review of experimental results and constitutive descriptions for metals and alloys in hot working
    • Lin Y.C., Chen Xiao-Min A critical review of experimental results and constitutive descriptions for metals and alloys in hot working. Mater Des 2011, 32:1733-1759.
    • (2011) Mater Des , vol.32 , pp. 1733-1759
    • Lin, Y.C.1    Chen, X.-M.2
  • 24
    • 0032282705 scopus 로고    scopus 로고
    • Modelling of hot deformation for microstructural control
    • Prasad Y.V.R.K., Seshacharyulu T. Modelling of hot deformation for microstructural control. Int Mater Rev 1998, 43:243-258.
    • (1998) Int Mater Rev , vol.43 , pp. 243-258
    • Prasad, Y.V.R.K.1    Seshacharyulu, T.2
  • 25
    • 4644321565 scopus 로고
    • Optimization of cold and warm workability in stainless steel type AISI 316L using instability maps
    • Venugopal S., Mannan S.L., Prasad Y.V.R.K. Optimization of cold and warm workability in stainless steel type AISI 316L using instability maps. J Nucl Mater 1995, 227:1-10.
    • (1995) J Nucl Mater , vol.227 , pp. 1-10
    • Venugopal, S.1    Mannan, S.L.2    Prasad, Y.V.R.K.3
  • 26
    • 77958473327 scopus 로고    scopus 로고
    • Characterization of deformation instability in modified 9Cr-1Mo steel during thermo-mechanical processing
    • Samantaray D., Mandal S., Bhaduri A.K. Characterization of deformation instability in modified 9Cr-1Mo steel during thermo-mechanical processing. Mater Des 2011, 32:716-722.
    • (2011) Mater Des , vol.32 , pp. 716-722
    • Samantaray, D.1    Mandal, S.2    Bhaduri, A.K.3
  • 28
    • 0034891202 scopus 로고    scopus 로고
    • Axisymmetric compression test and hot working properties of alloys
    • Evans R.W., Scharning P.J. Axisymmetric compression test and hot working properties of alloys. Mater Sci Technol 2001, 17:995-1004.
    • (2001) Mater Sci Technol , vol.17 , pp. 995-1004
    • Evans, R.W.1    Scharning, P.J.2
  • 29
    • 60449083177 scopus 로고    scopus 로고
    • The prediction of hot flow behavior of Al-6%Mg alloy
    • Gholamzadeh A., Karimi Taheri A. The prediction of hot flow behavior of Al-6%Mg alloy. Mech Res Commun 2009, 36:252-259.
    • (2009) Mech Res Commun , vol.36 , pp. 252-259
    • Gholamzadeh, A.1    Karimi Taheri, A.2
  • 30
    • 79956319700 scopus 로고    scopus 로고
    • A new relationship between the stress multipliers of Garofalo equation for constitutive analysis of hot deformation in modified 9Cr-1Mo (P91) steel
    • Phaniraj C., Samantaray Dipti, Mandal Sumantra, Bhaduri A.K. A new relationship between the stress multipliers of Garofalo equation for constitutive analysis of hot deformation in modified 9Cr-1Mo (P91) steel. Mater Sci Eng A 2011, 528:6066-6071.
    • (2011) Mater Sci Eng A , vol.528 , pp. 6066-6071
    • Phaniraj, C.1    Samantaray, D.2    Mandal, S.3    Bhaduri, A.K.4
  • 31
    • 84856554544 scopus 로고    scopus 로고
    • Hot deformation behavior of hot extruded Al-6Mg alloy
    • Mostafaei M.A., Kazeminezhad M. Hot deformation behavior of hot extruded Al-6Mg alloy. Mater Sci Eng, A 2012, 535:216-221.
    • (2012) Mater Sci Eng, A , vol.535 , pp. 216-221
    • Mostafaei, M.A.1    Kazeminezhad, M.2
  • 32
    • 68949166197 scopus 로고    scopus 로고
    • Effects of strain on the workability of a high strength low alloy steel in hot compression
    • Lin Y.C., Liu Ge Effects of strain on the workability of a high strength low alloy steel in hot compression. Mater Sci Eng, A 2009, 523:139-144.
    • (2009) Mater Sci Eng, A , vol.523 , pp. 139-144
    • Lin, Y.C.1    Liu, G.2
  • 33
    • 79957789721 scopus 로고    scopus 로고
    • Hot workability of 00Cr13Ni5Mo2 supermartensitic stainless steel
    • Zou D.N., Han Y., Yan D.N., Wang D., Zhang W., Fan G.W. Hot workability of 00Cr13Ni5Mo2 supermartensitic stainless steel. Mater Des 2011, 32:4443-4448.
    • (2011) Mater Des , vol.32 , pp. 4443-4448
    • Zou, D.N.1    Han, Y.2    Yan, D.N.3    Wang, D.4    Zhang, W.5    Fan, G.W.6
  • 34
    • 84875584788 scopus 로고    scopus 로고
    • Investigation on hot deformation of 20Cr-25Ni superaustenitic stainless steel with starting columnar dendritic microstructure based on kinetic analysis and processing map
    • Han Y., Liu G.W., Zou D.N., Sun J.P., Qiao G.J. Investigation on hot deformation of 20Cr-25Ni superaustenitic stainless steel with starting columnar dendritic microstructure based on kinetic analysis and processing map. Mater Sci Technol 2013, 29(9):300-308.
    • (2013) Mater Sci Technol , vol.29 , Issue.9 , pp. 300-308
    • Han, Y.1    Liu, G.W.2    Zou, D.N.3    Sun, J.P.4    Qiao, G.J.5
  • 35
    • 79955002977 scopus 로고    scopus 로고
    • Optimization of hot working parameters for thermo-mechanical processing of modified 9Cr-1Mo(P91) steel employing dynamic materials model
    • Samantaray D., Mandal S., Bhaduri A.K. Optimization of hot working parameters for thermo-mechanical processing of modified 9Cr-1Mo(P91) steel employing dynamic materials model. Mater Sci Eng, A 2011, 528:5204-5211.
    • (2011) Mater Sci Eng, A , vol.528 , pp. 5204-5211
    • Samantaray, D.1    Mandal, S.2    Bhaduri, A.K.3
  • 36
    • 1842507157 scopus 로고    scopus 로고
    • Deformation and recrystallization behavior during hot working of a coarse-grain, nickel-base superalloy ingot material
    • Semiatin S.L., Weaver D.S., Fagin P.N., Glavicic M.G., Goetz R.L., Frey N.D., et al. Deformation and recrystallization behavior during hot working of a coarse-grain, nickel-base superalloy ingot material. Metal Mater Trans A 2004, 35A:679-693.
    • (2004) Metal Mater Trans A , vol.35 A , pp. 679-693
    • Semiatin, S.L.1    Weaver, D.S.2    Fagin, P.N.3    Glavicic, M.G.4    Goetz, R.L.5    Frey, N.D.6
  • 37
    • 79957868320 scopus 로고    scopus 로고
    • Hot deformation behavior of a Nb-containing 316LN stainless steel
    • Zhang W.H., Sun S.H., Zhao D.L., Wang B.Z., Wang Z.H., Fu W.T. Hot deformation behavior of a Nb-containing 316LN stainless steel. Mater Des 2011, 32:4173-4179.
    • (2011) Mater Des , vol.32 , pp. 4173-4179
    • Zhang, W.H.1    Sun, S.H.2    Zhao, D.L.3    Wang, B.Z.4    Wang, Z.H.5    Fu, W.T.6
  • 38
    • 0025459049 scopus 로고
    • Effect of hot working on structure and strength of type 304L austentic stainless steel
    • Mataya M.C., Brown E.L., Riendeau M.P. Effect of hot working on structure and strength of type 304L austentic stainless steel. Mater Trans 1990, 21A:1969-1987.
    • (1990) Mater Trans , vol.21 A , pp. 1969-1987
    • Mataya, M.C.1    Brown, E.L.2    Riendeau, M.P.3
  • 39
    • 0030148867 scopus 로고    scopus 로고
    • Flow stress and microstructural evolution during hot working of alloy 22Cr-13Ni-5Mn-0.3N austenitic stainless steel
    • Mataya M.C., Pepkins C.A., Thompson S.W., Matlock D.K. Flow stress and microstructural evolution during hot working of alloy 22Cr-13Ni-5Mn-0.3N austenitic stainless steel. Metal Mater Trans A 1996, 27A:1251-1266.
    • (1996) Metal Mater Trans A , vol.27 A , pp. 1251-1266
    • Mataya, M.C.1    Pepkins, C.A.2    Thompson, S.W.3    Matlock, D.K.4
  • 40
    • 84862797174 scopus 로고    scopus 로고
    • Hot deformation behavior of Ti-15-3 titanium alloy: a study using processing maps, activation energy map, and Zener-Hollomon parameter map
    • Zhang J.Q., Di H.S., Wang H.T., Mao K., Ma T.J., Cao Y. Hot deformation behavior of Ti-15-3 titanium alloy: a study using processing maps, activation energy map, and Zener-Hollomon parameter map. J Mater Sci 2012, 47:4000-4011.
    • (2012) J Mater Sci , vol.47 , pp. 4000-4011
    • Zhang, J.Q.1    Di, H.S.2    Wang, H.T.3    Mao, K.4    Ma, T.J.5    Cao, Y.6
  • 41
    • 0037084287 scopus 로고    scopus 로고
    • Characteristics of shear bands formed in an austenitic stainless steel during hot deformation
    • Cizek P. Characteristics of shear bands formed in an austenitic stainless steel during hot deformation. Mater Sci Eng, A 2002, 324:214-218.
    • (2002) Mater Sci Eng, A , vol.324 , pp. 214-218
    • Cizek, P.1
  • 42
    • 78650174949 scopus 로고    scopus 로고
    • Research on the hot deformation behavior of Ti40 alloy using processing map
    • Sun Y., Zeng W.D., Zhao Y.Q., Zhang X.M., Shu Y., Zhou Y.G. Research on the hot deformation behavior of Ti40 alloy using processing map. Mater Sci Eng, A 2011, 528:1205-1211.
    • (2011) Mater Sci Eng, A , vol.528 , pp. 1205-1211
    • Sun, Y.1    Zeng, W.D.2    Zhao, Y.Q.3    Zhang, X.M.4    Shu, Y.5    Zhou, Y.G.6
  • 43
    • 0037203952 scopus 로고    scopus 로고
    • Characteristics of superplasticity domain in the processing map for hot working of as-cast Mg-11.5Li-1.5Al alloy
    • Sivakesavam O., Prasad Y.V.R.K. Characteristics of superplasticity domain in the processing map for hot working of as-cast Mg-11.5Li-1.5Al alloy. Mater Sci Eng, A 2002, 323:270-277.
    • (2002) Mater Sci Eng, A , vol.323 , pp. 270-277
    • Sivakesavam, O.1    Prasad, Y.V.R.K.2
  • 44
    • 0345765077 scopus 로고    scopus 로고
    • A journey with Prasad's processing maps
    • Venugopal S., Sivaprasad P.V. A journey with Prasad's processing maps. JMEPEG 2003, 12:674-686.
    • (2003) JMEPEG , vol.12 , pp. 674-686
    • Venugopal, S.1    Sivaprasad, P.V.2
  • 45
    • 67649408947 scopus 로고    scopus 로고
    • Processing maps and hot workability of Super304H austenitic heat-resistant stainless steel
    • Tan S.P., Wang Z.H., Cheng S.C., Liu Z.D., Han J.C., Fu W.T. Processing maps and hot workability of Super304H austenitic heat-resistant stainless steel. Mater Sci Eng, A 2009, 517:312-315.
    • (2009) Mater Sci Eng, A , vol.517 , pp. 312-315
    • Tan, S.P.1    Wang, Z.H.2    Cheng, S.C.3    Liu, Z.D.4    Han, J.C.5    Fu, W.T.6
  • 46
    • 84865314447 scopus 로고    scopus 로고
    • Research on flow stress during hot deformation process and processing map for 316LN austenitic stainless steel
    • Guo B.F., Ji H.P., Liu X.G., Gao L., Dong R.M., Jin M., et al. Research on flow stress during hot deformation process and processing map for 316LN austenitic stainless steel. JMEPEG 2012, 21:1455-1461.
    • (2012) JMEPEG , vol.21 , pp. 1455-1461
    • Guo, B.F.1    Ji, H.P.2    Liu, X.G.3    Gao, L.4    Dong, R.M.5    Jin, M.6


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.