Flow stress and microstructural evolution during hot working of alloy 22Cr-13Ni-5Mn-0.3N austenitic stainless steel

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 27, Issue 5, 1996, Pages 1251-1266

  Mataya, M C ^a   Perkins, C A ^b   Thompson, S W ^c   Matlock, D K ^a  

^a Safe Sites of Colorado   (United States)

^b Schuller Int Inc   (United States)

^c Department of Geology and Geological Engineering   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CHROMIUM ALLOYS; COMPACTION; GRAIN BOUNDARIES; GRAIN SIZE AND SHAPE; HOT WORKING; METALLOGRAPHIC MICROSTRUCTURE; PLASTIC FLOW; RECRYSTALLIZATION (METALLURGY); STRAIN; STRAIN RATE; STRESSES;

CHROMIUM NICKEL MANGANESE NITROGEN ALLOY STAINLESS STEEL; STACKING FAULT ENERGY; STRESS STRAIN BEHAVIOR; UNIAXIAL COMPRESSION;

STAINLESS STEEL;

EID: 0030148867     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF02649862     Document Type: Article

References (48)

1. H.J. McQucen and J.J. Jonas: J. Appl. Metalworking, 1984, vol. 3 (3), pp. 233-41.
2. W. Roberts: in Deformation, Processing and Structure, G. Krauss, ed., ASM, Metals Park, OH, 1984, pp. 109-84.
3. D.J. Towle and T. Gladman: Met. Sci, 1979, Mar.-Apr., pp. 246-56.
4. M.C. Mataya, M.J. Carr, and G. Krauss: Metall. Trans. A, 1984, vol. 15A, pp. 347-68.
5. M.C. Mataya, E.L. Brown, and M.P. Riendeau: Metall. Trans. A, 1990, vol. 21 A, pp. 1969-87.
6. M.C. Mataya and O.K. Matlock: in SuperAlloy 718 Metallurgy and Applications, E. Loria, ed., IMS, Warrendale, PA, 1989, pp. 155-78.
7. C. Ouchi, T. Okita, T. Ichihara, and Y. Ueno: Trans. Iron Steel Inst. Jpn., 1980, vol. 20, pp. 833-41.
8. E.G. Sanderson, A.W. Brewer, R.W. Krenzer, and G. Krauss: Report No. RFP-2743, Rockwell International, Rocky Flats Plant, June 24, 1978; available through United States Department of Commerce, NTIS, Springfield, VA.
9. R.L. Page and R.W. Krenzer: Report No. RFP-2692, Rockwell International, Rocky Flats Plant, Mar. 22, 1979; available through United States Department of Commerce, NTIS, Springfield, VA.
10. M.C. Mataya, M.J. Carr, R.W. Krenzer, and G. Krauss: Report No. RFP-3020, Rockwell International, Rocky Flats Plant, Aug. 10, 1981; available through United States Department of Commerce, NTIS, Springfield, VA.
11. C.J. Novak: in Handbook of Stainless Steels, D. Peckner and I.M. Bernstein, eds., McGraw-Hill Book Co., New York, NY, 1977, pp. 35-53.
12. B. Weiss and R. Stickler: Metall. Trans., 1972, vol. 3, pp. 851-66.
13. P. Duhaj, J. Ivan, and E. Makovicky: J. Iron Steel Inst., 1968, pp. 1245-51.
14. J.E. Spruiell, J.A. Scott, C.S. Ary, and R.L. Hardin: Metall. Trans., 1973, vol. 4, pp. 1533-44.
15. A.S. Grot and J.E. Spruiell: Metall. Trans. A, 1975, vol. 6A, pp. 2023-30.
16. M.C. Mataya and M.J. Carr: in Deformation. Processing and Structure, G. Krauss, ed., ASM, Metals Park, OH, 1984, pp. 445-501.
17. C.C. Tseng, Y. Shen, S.W. Thompson, M.C. Mataya, and G. Krauss: Metall. Trans. A, 1994, vol. 25A, pp. 1147-58.
18. E.F. Denhard: U.S. Patent No. 3,592,634, 1971.
19. M.W. Perra: in Environmental Degradation of Engineering Materials in Hydrogen, M.R. Louthan, R.P. McNitt, and R.D. Sisson, eds., VP1 Press, Blacksburg, VA, 1981, pp. 321-33.
20. J.A. Douthett: Met. Progress, 1975, Aug., pp. 50-55.
21. D.T. Read and R.P. Reed: Cryogenics, 1981, July, pp. 415-17.
22. E.E. Denhard and R.H. Espy: Met. Eng. Q., 1972, pp. 18-20.
23. B.C. Odegard and A.J. West: Mater. Sci. Eng., 1975, vol. 19, pp. 261-70.
24. P.T. Purtscher, M.C. Mataya, L.M. Ma, and R.P. Reed: in Advances in Cryogenic Engineering (Materials), R.P. Reed and F.R. Fickett, eds., Plenum Press, New York, NY, 1990, vol. 36, pp. 1291-98.
25. W. Reiss and K. Pohlandt: Exper. Techniq., 1986, pp. 20-24.
26. M.J. Weis: Master's Thesis, Colorado School of Mines, Golden, CO, 1987.
27. M.C. Mataya and V. Sackschewsky: Metall. Trans. A, 1994, vol. 25A, pp. 2737-52.
28. J.F. Thomas, Jr. and R. Srinivasan: in Computer Simulation Materials Science, RJ. Arsenault, J.R. Beeler, Jr., and D.M. Esterling, eds., ASM INTERNATIONAL, Metals Park, OH, 1988, pp. 269-90.
29. O.D. Sherby, R.H. Klundt, and A.K. Miller: Metall. Trans. A, 1977, vol. 8A, pp. 843-50.
30. C.A. Perkins: Master's Thesis, Colorado School of Mines, Golden, CO, 1987.
31. D.H. Jack and K.H. Jack: J. Iron Steel Inst., 1972, vol. 210, pp. 790-92.
32. S.J. Tua, R.K. Weiss, G. Krauss, and S.W. Thompson: Proc. Gil Speich Symp., G. Krauss and P.E. Repas, eds., 34th Mechanical Working and Steel Processing Conf., Montreal, Oct. 25-28, 1992, ISS-AIME, Warrendale, PA, pp. 53-66.
33. S. Degallaix, J. Foct, and A. Hendry: Mater. Sci. Technol., 1986, vol. 2, pp. 946-50.
34. L.G. Liljestrand: Scand. J. Metall., 1972, vol. 1 (5), pp. 271-77.
35. M. Fujikura, K. Takada, and K. Ishida: Trans. Iron Steel Inst. Jpn., 1975, vol. 15, pp. 464-69.
36. S.R. Keown and F.B. Pickering: in Niobium, H. Stuart, ed., TMSAIME, Warrendale, PA, 1984, pp. 1113-41.
37. M.C. Mataya and G. Krauss: J. Appl. Metalworking, 1981, vol. 1 (1), pp. 28-37.
38. R.E. Schramm and R.P. Reed: Metall. Trans. A, 1975, vol. 6A, pp. 1345-51.
39. C.G. Rhodes and A.W. Thompson: Metall. Trans. A, 1977, vol. 8A, pp. 1901-06.
40. P.J. Brofman and G.S. Ansell: Metall. Trans. A, 1978, vol. 9A, pp. 879-81.
41. R.E. Stoltz and J.B. VanderSande: Report No. SAND 79-8735, Sandia National Laboratories, Albuquerque, NM, Dec. 1979.
42. M.J. Luton and C.M. Sellars: Acta Metall., 1969, vol. 17, pp. 1033-43.
43. V.M. Sample, G.L. Fitzsimons, and A.J. DeArdo: Acta Metall., 1987, vol. 35 (2), pp. 367-79.
44. A.M. Ritter, M.F. Henry, and W.F. Savage: Metall. Trans. A, 1984, vol. 15A, pp. 1339-51.
45. A.M. Ritter and M.F. Henry: Metall. Trans. A, 1985, vol. 16A, pp. 1759-71.
46. H. Hughes: J. Iron Steel Inst., 1967, July, pp. 775-78.
47. D.B. Rayaprolu and A. Hendry: Mater. Sci. Technol., 1989, vol. 5, pp. 328-32.
48. M.R. Staker and N.J. Grant: Maler. Sci. Eng., 1985, vol. 75, pp. 137-50.