Application of Refined Plate Theory to Fracture and Fatigue

Structural Failure Analysis and Prediction Methods for Aerospace Vehicles and Structures

Volumn , Issue , 2010, Pages 96-132

  Kotousov, A ^a   Codrington, J ^a  

^a UNIVERSITY OF ADELAIDE   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84882641568     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.2174/978160805024611001010096     Document Type: Chapter

References (73)

1. Hartranft R.J., Sih G.C. An approximate three-dimensional theory of plates with application to crack problems. Int J Eng Sci 1970; 8: 711-729.
2. Kwon S.W., Sun CT. Characteristics of three-dimensional stress fields in plates with a through-the-thickness crack. Int J Fracture 2000; 104: 291-315.
3. Kotousov A. Fracture in plates of finite thickness. Int J Solids Structures 2007; 44: 8259-8273.
4. Kotousov A.G., Harding S., Lazzarin P. On plate thickness effect in plane problems of elasticity. In proc: Crack Path 2009, Vicenza, Italy.
5. Kane T.R., Mindlin RD. High frequency extensional vibrations of plates. J App Mechanics 1956; 23: 277-283.
6. Kotousov A., Wang CH. Three-dimensional stress constraint in an elastic plate with a notch. Int J Solids Structures 2002; 39: 4311-4326.
7. Timoshenko S., Woinowsky-Krieger S. Theory of plates and shells, Second Edition, 1959, McGraw Hill.
8. Yu Y. Vibration of elastic plates: linear and non-linear dynamical modelling of sandwiches, laminated composites, and piezoelectric layers, Springer-Verlag, New York, 1995.
9. Yang W., Freund LB. Transverse shear effects for through cracks in an elastic plate. Int J Solids Struct 1985; 21: 977-994.
10. Timoshenko S.P., Goodier JN. Theory of elasticity, Third Edition, 1970, McGraw-Hill.
11. Kotousov A., Wang CH. Fundamental solutions for the generalized plane strain theory. Int J Eng Sci 2002; 40:1775-1790.
12. Liebfried G. Verteilung von Versetzungen im statischen Gleichgewicht. Zeitschrift fur Physik 1951; 130: 214-226.
13. Eshelby JD. The continuum theory of lattice defects. Solid State Physics 1956; 3: 79-144.
14. Erdogan F. Fracture Mechanics, Int J Solids Structures 2000; 37: 171-183.
15. Keer L.M., Mura T. Stationary crack and continuous distribution of dislocations, in Proceedings of the 1st International Conference on Fracture, 1966; 99-115.
16. Codrington J., Kotousov A. Application of the distributed dislocation technique for calculating crack tip plasticity effects. Fatigue Fract Eng Mater Struct 2007; 30: 1182-1193.
17. Hills D.A., Kelly P.A., Dai D.N., Korsunsky AM. Solution of crack problems. The distributed dislocation technique. Kluwer Academic Publisher, The Netherlands, 1996.
18. Erdogan F., Gupta GD. On the numerical solution of singularintegral equations. Q. Appl. Math. 1972; 30: 525-534.
19. Nakamura T., Parks DM. Three-dimensional stress field near the crack front of a thin elastic plate. J Appl Mech 1988; 55: 805-813.
20. She C., Guo W. The out-of-plane constraint of mixed-mode cracks in thin elastic plates. Int J Solids Struct 2007; 44: 3021-3034.
21. Pfaff R.D., Washabaugh P.D., Knauss W.G. An interpretation of Twyman-Green interferograms from static and dynamic fracture experiments. Int J Solids Struct 1994; 32: 939-955.
22. Rice J.R., A path independent integral and the approximate analysis of strain concentration by notches and cracks. J Appl Mech 1968; 35: 379-386.
23. Humbert L., Valle V., Cottron M. Experimental determination and empirical representation of out-of-plane displacements in a cracked elastic plate loaded in mode I. Int J Solids Struct 2000; 37: 5493-5504.
24. Dugdale DS. Yielding of steel sheets containing slits. J Mech Phys Solids 1960; 8: 100-104.
25. Kotousov A., Wang CH. Strip yield model for a crack in a plate of arbitrary thickness, The 14th European Conference on Fracture (ECF14), 8-13 September 2002, Krakow, Poland: 217-224.
26. Kelly P.A., Nowell D. Three-dimensional cracks with Dugdale-type plastic zones. Int J Fract 2000; 106: 291-309.
27. Newman Jr J.C., Crews Jr J.H., Bigelow C.A., Dawicke DS. Variations of a global constraint factor in cracked bodies under tension and bending loads. Constraint effects in fracture theory and applications, ASTM STP 1995; 1244: 21-42.
28. Elber W. Fatigue crack closure under cyclic tension. Eng Fract Mech 1970; 2: 37-45.
29. Elber W. The significance of fatigue crack closure. Damage Tolerance in Aircraft Structures, ASTM STP 1971; 486: 230-242.
30. Newman Jr JC. The merging of fatigue and fracture mechanics concepts: a historical perspective. Prog Aerosp Sci 1998; 34: 347-390.
31. Skorupa M. Load interaction effects during fatigue crack growth under variable amplitude loading - a literature review. Part II: qualitative interpretation. Fatigue Fract Eng Mater Struct 1999; 22: 905-926.
32. Dougherty J.D., Srivatsan T.S., Padovan J. Fatigue crack propagation and closure behavior of modified 1070 steel: experimental results. Eng Fract Mech 1997; 56: 67-187.
33. Skorupa M., Skorupa A. Experimental results and predictions on fatigue crack growth in structural steel. Int J Fatigue 2005; 27: 1016-1028.
34. Schijve J. Some formulas for the crack opening stress level. Eng Fract Mech 1981; 14: 461-465.
35. McEvily A.J., Ishihara S. On the development of crack closure at high R levels after and overload. Fatigue Fract Eng Mater Struct 2002; 25; 993-998.
36. Bachmann V., Munz D. Crack closure in fatigue of titanium alloy. Int J Fract 1975; 11: 713-716.
37. James M.N., Pacey M.N., Wei L.W., Patterson EA. Characterisation of plasticityinduced closure-crack flank contact force versus plastic enclave. Eng Fract Mech 2003; 70: 2473-2487.
38. Codrington J., Kotousov A. A crack closure model of fatigue crack growth in plates of finite thickness under small-scale yielding conditions. Mech Mater 2009; 41: 165-173.
39. Suresh S. Fatigue of Materials. Cambridge University Press, Cambridge, 1991.
40. Blom A.F., Holm DK. An experimental and numerical study of crack closure. Eng Fract Mech 1985; 22: 997-1011.
41. Stoychev S., Kujawski D. Methods for crack opening load and crack tip shielding determination: a review. Fatigue Fract Eng Mater Struct 2003; 26: 1053-1067.
42. Skorupa M. Load interaction effects during fatigue crack growth under variable amplitude loading - a literature review. Part I: empirical trends. Fatigue Fract Eng Mater Struct 1998; 21: 987-1006.
43. Shuter D.M., Geary W. The influence of specimen thickness on fatigue crack growth retardation following an overload. Int J Fatigue 1995; 17: 111-119.
44. Borrego L.P., Ferreira J.M., Pinho da Cruz J.M., Costa JM. Evaluation of overload effects on fatigue crack growth and closure. Eng Fract Mech 2003; 70: 1379-1397.
45. Basquin OH. The exponential law of endurance tests, in Proceedings of the Annual Meeting of the American Society for Testing Materials, 1910; 625-630.
46. Fatemi A., Yang L. Cumulative fatigue damage and life prediction theories: A survey of the state of the art for homogeneous materials. Int J Fatigue 1998; 20: 9-34.
47. Paris P.C., Erdogan F. A critical analysis of crack propagation laws. J Basic Eng 1963; 85: 528-534.
48. Dill H.D., Saff CR. Spectrum crack growth prediction method based on crack surface displacement and contact analyses. Fatigue crack growth under spectrum loads, ASTM STP 1976; 595: 306-319.
49. Budiansky B., Hutchinson JW. Analysis of closure in fatigue crack growth. J Appl Mech 1978; 45: 267-276.
50. Führing H., Seeger T. Dugdale crack closure analysis of fatigue cracks under constant amplitude loading. Eng Fract Mech 1979; 11; 99-122.
51. Newman Jr JC. A crack closure model for predicting fatigue crack growth under aircraft spectrum loading. Methods and Models for Predicting Fatigue Crack Growth under Random Loading, ASTM STP 1981; 748: 53-84.
52. Newman Jr J.C., Phillips E.P., Swain MH. Fatigue-life prediction methodology using small-crack theory. Int J Fatigue 1999; 21: 109-119.
53. Solanki K., Daniewicz S.R., Newman Jr JC. Finite element analysis of plasticity-induced fatigue crack closure: an overview. Eng Fract Mech 2004; 71: 149-171.
54. Wang G.S., Blom AF. A strip model for fatigue crack growth predictions under general load conditions. Eng Fract Mech 1991; 40: 507-533.
55. Codrington J. On the effect of plate thickness on post-overload fatigue crack growth. Int J Fract 2009; 155: 93-99.
56. Codrington J., Kotousov A. Crack growth retardation following the application of an overload cycle using a strip-yield model. Eng Fract Mech 2009; 76: 1667-1682.
57. Nowell D. A boundary element model of plasticity-induced fatigue crack closure. Fatigue Fract Eng Mater Struct 1998; 21: 857-871.
58. Codrington J., Kotousov A. The distributed dislocation technique for calculating plasticity-induced crack closure in plates of finite thickness. Int J Fract 2007; 144: 285-295.
59. Park H.B., Lee BW. Effect of specimen thickness on fatigue crack growth rate. Nucl Eng Des 2000; 197: 197-203.
60. Shin C.S., Hsu SH. On the mechanisms and behaviour of overload retardation in AISI 304 stainless steel. Int J Fatigue 1993; 15: 181-192.
61. Bichler Ch, Pippan R. Effect of single overloads in ductile metals: A reconsideration. Eng Fract Mech 2007; 74: 1344-1359.
62. Schijve J., Broek D. The results of a test programme based on a gust spectrum with variable amplitude loading. Airc Engng Aerosp Technol 1962; 34: 314-316.
63. Suresh S. Crack growth retardation due to micro-roughness: a mechanism for overload effects in fatigue. Scripta Metall 1982; 16: 995-999.
64. Suresh S. Micromechanisms of fatigue crack growth retardation following overloads. Eng Fract Mech 1983; 18: 577-593.
65. Borrego L.P., Ferreira J.M., Costa JM. Fatigue crack growth and crack closure in an AlMgSi alloy. Fatigue Fract Eng Mater Struct 2001; 24: 255-265.
66. Pommier S., de Freitas M. Effect on fatigue crack growth of interactions between overloads. Fatigue Fract Eng Mater Struct 2002; 25: 709-722.
67. Thorpe T.W., Scott P.M., Rance A., Silvester D. Corrosion fatigue of BS 4360:50D structural steel in seawater. Int J Fatigue 1983; 5: 123-133.
68. Leis BN. Displacement controlled fatigue crack growth in inelastic notch fields: implications for short cracks. Eng Fract Mech 1985; 22: 279-293.
69. Shin C.S., Smith RA. Fatigue crack growth from sharp notches. Int J Fatigue 1985; 7: 87-93.
70. Benedetti M., Fontanari V., Lütjering G., Albrecht J. The effect of notch plasticity on the behaviour of fatigue cracks emanating from edge-notches in high-strength β-titanium alloys. Eng Fract Mech 2008; 75: 169-187.
71. Taylor D., Knott JF. Fatigue crack propagation behaviour of short cracks; the effect of microstructure. Fatigue Fract Eng Mater Struct 1981; 4: 147-155.
72. Suresh S., Ritchie RO. Propagation of short fatigue cracks. Int Metals Rev 1984; 29: 445-476.
73. Liaw P.K., Logsdon WA. Crack closure: an explanation for small fatigue crack growth behaviour. Eng Fract Mech 1985; 22: 115-121.