Crack growth retardation following the application of an overload cycle using a strip-yield model

Engineering Fracture Mechanics

Volumn 76, Issue 11, 2009, Pages 1667-1682

  Codrington, John ^a   Kotousov, Andrei ^a  

^a UNIVERSITY OF ADELAIDE   (Australia)

Author keywords

Crack growth retardation; Distributed dislocation technique; Fatigue crack closure; Overload effect; Plasticity induced crack closure

Indexed keywords

CRACK ARREST; CRACK GROWTH; CRACK GROWTH RETARDATION; DISTRIBUTED DISLOCATION TECHNIQUE; EXPERIMENTAL DATA; FATIGUE CRACK CLOSURE; FATIGUE CRACK GROWTH; OVERLOAD CYCLES; OVERLOAD EFFECT; PLANE STRESS CONDITION; STRIP YIELD MODEL;

CRACKING (CHEMICAL); FATIGUE CRACK PROPAGATION; FATIGUE OF MATERIALS; PLASTICITY;

CRACK CLOSURE;

EID: 63349084282     PISSN: 00137944     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.engfracmech.2009.02.021     Document Type: Article

References (35)

1. Schijve J., and Broek D. The results of a test programme based on a gust spectrum with variable amplitude loading. Airc Engng Aerosp Technol 34 (1962) 314-316
2. Hudson CM, Hardrath HF. Effects of changing stress amplitude on the rate of fatigue crack propagation of two aluminum alloys. National Aeronautics and Space Administration, NASA Tech Note D-960. Washington, DC; 1961.
3. Skorupa M. Load interaction effects during fatigue crack growth under variable amplitude loading-a literature review. Part I: empirical trends. Fatigue Fract Engng Mater Struct 21 (1998) 987-1006
4. Gan D., and Weertman J. Crack closure and crack propagation rates in 7050 aluminium. Engng Fract Mech 15 (1981) 87-106
5. Damri D., and Knott J.F. Transient retardations in fatigue crack growth following a single peak overload. Fatigue Fract Engng Mater Struct 14 (1991) 709-719
6. Elber W. The significance of fatigue crack closure. In: Rosenfield M.S. (Ed). Damage tolerance in aircraft structures, ASTM STP 486 (1971), American Society for Testing and Materials, Philadelphia 230-242
7. Suresh S. Crack growth retardation due to micro-roughness: a mechanism for overload effects in fatigue. Scr Metall 16 (1982) 995-999
8. Ward-Close C.M., Blom A.F., and Ritchie R.O. Mechanisms associated with transient fatigue crack growth under variable-amplitude loading: an experimental and numerical study. Engng Fract Mech 32 (1989) 613-638
9. Christensen R.H. Metal fatigue (1959), McGraw-Hill, New York
10. Knott J.F., and Pickard A.C. Effects of overloads on fatigue-crack propagation: aluminium alloys. Metal Sci 11 (1977) 399-404
11. Bathias C., and Vancon M. Mechanisms of overload effect on fatigue crack propagation in aluminium alloys. Engng Fract Mech 10 (1978) 224-409
12. Suresh S. Micromechanisms of fatigue crack growth retardation following overloads. Engng Fract Mech 18 (1983) 577-593
13. Fleck N.A. Influence of stress state on crack growth retardation. In: Fong J.T., and Fields R.J. (Eds). Basic questions in fatigue: vol. I, ASTM STP 924 (1988), American Society for Testing and Materials, Philadelphia 157-183
14. Shin C.S., and Hsu S.H. On the mechanisms and behaviour of overload retardation in AISI 304 stainless steel. Int J Fatigue 15 (1993) 181-192
15. Bichler C.H., and Pippan R. Direct observation of the residual plastic deformation caused by a single tensile overload. In: McClung R.C., and Newman Jr. J.C. (Eds). Advances in fatigue crack closure measurement an analysis, ASTM STP 1343 (1999), American Society for Testing and Materials, West Conshohocken 191-206
16. Borrego L.P., Ferreira J.M., and Costa J.M. Fatigue crack growth and crack closure in an AlMgSi alloy. Fatigue Fract Engng Mater Struct 24 (2001) 255-265
17. Borrego L.P., Ferreira J.M., Pinho da Cruz J.M., and Costa J.M. Evaluation of overload effects on fatigue crack growth and closure. Engng Fract Mech 70 (2003) 1379-1397
18. Bichler C.h., and Pippan R. Effect of single overloads in ductile metals: a reconsideration. Engng Fract Mech 74 (2007) 1344-1359
19. Pommier S., and de Freitas M. Effect on fatigue crack growth of interactions between overloads. Fatigue Fract Engng Mater Struct 25 (2002) 709-722
20. Roychowdhury S., and Dodds Jr. R.H. Effects of an overload event on crack closure in 3-D small-scale yielding: finite element studies. Fatigue Fract Engng Mater Struct 28 (2005) 891-907
21. Singh K.D., Khor K.H., and Sinclair I. Roughness- and plasticity-induced fatigue crack closure under single overloads: finite element modelling. Acta Mater 54 (2006) 4393-4403
22. Dugdale D.S. Yielding of steel sheets containing slits. J Mech Phys Sol 8 (1960) 100-104
23. Barenblatt G.I. The mathematical theory of equilibrium cracks in brittle fracture. Advances in applied mechanics VII (1962), Academic Press p. 55-129
24. Budiansky B., and Hutchinson J.W. Analysis of closure in fatigue crack growth. J Appl Mech 45 (1978) 267-276
25. McCartney L.N. A theoretical explanation of the delaying effects of overloads on fatigue crack propagation. Int J Fracture 14 (1978) 213-232
26. Russell S.G. A new model for fatigue crack growth retardation following an overload. Engng Fract Mech 33 (1989) 839-854
27. Dill H.D., and Saff C.R. Spectrum crack growth prediction method based on crack surface displacement and contact analyses. In: Wei R.P., and Stephens R.I. (Eds). Fatigue crack growth under spectrum loads, ASTM STP 595 (1976), American Society for Testing and Materials 306-319
28. Newman J.C. A crack closure model for predicting fatigue crack growth under aircraft spectrum loading. In: Chang J.B., and Hudson C.M. (Eds). Methods and models for predicting fatigue crack growth under random loading, ASTM STP 748 (1981), Philadelphia, American Society for Testing and Materials 53-84
29. Nowell D. A boundary element model of plasticity-induced fatigue crack closure. Fatigue Fract Engng Mater Struct 21 (1998) 857-871
30. Rose L.R.F., and Wang C.H. Self-similar analysis of plasticity-induced closure of small fatigue cracks. J Mech Phys Solids 49 (2001) 401-429
31. Codrington J., and Kotousov A. Application of the distributed dislocation technique for calculating cyclic crack tip plasticity effects. Fatigue Fract Engng Mater Struct 30 (2007) 1182-1193
32. Codrington J., and Kotousov A. The distributed dislocation technique for calculating plasticity-induced crack closure in plates of finite thickness. Int J Fract 144 (2007) 285-295
33. McClung R.C. Finite element analysis of specimen geometry effects on fatigue crack closure. Fatigue Fract Engng Mater Struct 17 (1994) 861-872
34. Hills D.A., Kelly P.A., Dai D.N., and Korsunsky A.M. Solution of crack problems-the distributed dislocation technique (1996), Kluwer Academic Publishers, Dordrecht
35. Dai D.N. Modelling crack in finite bodies by distributed dislocation dipoles. Fatigue Fract Engng Mater Struct 25 (2002) 27-39