SCOPUS 정보 검색 플랫폼 - 논문 보기

메뉴 건너뛰기

Fatigue and Fracture of Engineering Materials and Structures

Volumn 24, Issue 4, 2001, Pages 255-265

Fatigue crack growth and crack closure in an AIMgSi alloy

(3) Borrego, L P a Ferreira, J M b Costa, J M b

a POLYTECHNIC INSTITUTE OF COIMBRA (Portugal)

b UNIVERSITY OF COIMBRA (Portugal)

Author keywords

Aluminium alloys; Crack closure; Fatigue crack propagation; Overloads

Indexed keywords

CRACK PROPAGATION; FATIGUE TESTING; STRESS INTENSITY FACTORS;

CRACK CLOSURE; FATIGUE CRACK GROWTH;

ALUMINUM ALLOYS;

EID: 0035300869 PISSN: 8756758X EISSN: None Source Type: Journal
DOI: 10.1046/j.1460-2695.2001.00383.x Document Type: Article

Times cited : (88)

References (30)

1
- 0014809315
- Fatigue crack closure under cyclic tension
- (1970) Engng Fract. Mech. , vol.2 , pp. 37-45
- Elber, W.¹

2
- 0021978055
- An experimental and numerical study of crack closure
- (1984) Engng Fract. Mech. , vol.22 , pp. 997-1011
- Blom, A.F.¹ Holm, D.K.²

3
- 0015055746
- The significance of fatigue crack closure
- ASTM STP 486. American Society for Testing and Materials, Philadelphia, PA, USA
- (1971) Damage Tolerance in Aircraft Structures , pp. 230-242
- Elber, W.¹

4
- 0029255153
- Influence of stress ratio on fatigue crack growth in mild steel
- (1995) Engng Fract. Mech. , vol.50 , pp. 377-384
- Kumar, R.¹ Singh, K.²

5
- 0019398428
- Some formulas for crack opening stress level
- (1981) Engng Fract. Mech. , vol.14 , pp. 461-465
- Schijve, J.¹

6
- 0004646487
- Crack closure in fatigue of titanium alloy
- (1975) Int. J. Fract. , vol.11 , pp. 713-716
- Bachmann, V.¹ Munz, D.²

7
- 0021901319
- Influence of R on effective stress range ratio and crack growth
- (1985) Engng Fract. Mech. , vol.22 , pp. 915-926
- Srivastava, Y.P.¹ Garg, S.B.L.²

8
- 0027353222
- Fracture modes encountered following the application of a major tensile overload cycle
- (1993) Int. J. Fatigue , vol.15 , pp. 53-60
- Damri, D.¹ Knott, J.F.²

9
- 0030081905
- Variable amplitude loading in En8 (080M40) steel: A detailed experimental study of crack growth
- (1996) Fatigue Fract. Engng Mater. Struct. , vol.19 , pp. 207-216
- Ng'Ang'and, A.S.P.¹ James, M.N.²

10
- 0025657805
- Effect of specimen geometry on fatigue crack growth in plane strain-II. Overload response
- (1990) Fatigue Fract. Engng Mater. Struct. , vol.13 , pp. 297-310
- Shercliff, H.R.¹ Fleck, N.A.²

11
- 85063798606
- Influence of stress state on crack growth retardation
- ASTM STP 924, (Edited by J. T. Fong and R. J. Fields). American Society for Testing and Materials, Philadelphia, PA, USA
- (1988) Basic Questions in Fatigue, Volume 1 , vol.1 , pp. 157-183
- Fleck, N.A.¹

12
- 0000644451
- On the mechanisms and behaviour of overload retardation in AISI 304 stainless steel
- (1993) Int. J. Fatigue , vol.15 , pp. 181-192
- Shin, C.S.¹ Hsu, S.H.²

13
- 0020588879
- Influence of the overload on the fatigue crack growth in steels
- (1983) Fatigue Fract. Engng Mater. Struct. , vol.6 , pp. 1-13
- Robin, C.¹ Louah, M.² Pluvinage, G.³

14
- 0030193279
- Transient fatigue crack growth behaviour following single overloads at high stress ratios
- (1996) Fatigue Fract. Engng Mater. Struct. , vol.19 , pp. 879-891
- Tsukuda, H.¹ Ogiyama, H.² Shiraishi, T.³

15
- 0029256391
- The influence of specimen thickness on fatigue crack growth retardation following an overload
- (1995) Int. J. Fatigue , vol.17 , pp. 111-119
- Shuter, D.M.¹ Geary, W.²

16
- 85167455152
- On the role of crack closure mechanisms in influencing fatigue crack growth following tensile overloads in a titanium alloy: Near threshold versus higher ΔK behaviour
- ASTM STP 982, (Edited by J. C. Newman, Jr and W. Elber). American Society for Testing and Materials, Philadelphia, PA, USA
- (1988) Mechanics of Fatigue Crack Closure , pp. 93-111
- Ward-Close, C.M.¹ Richie, R.O.²

17
- 0024860328
- Mechanisms associated with transient fatigue crack growth under variable amplitude loading: An experimental and numerical study
- (1989) Engng Fract. Mech. , vol.32 , pp. 613-638
- Ward-Close, C.M.¹ Blom, A.F.² Richie, R.O.³

18
- 0024909672
- Modelling and measurement of crack closure and crack growth following overloads and underloads
- (1989) Engng Fract. Mech. , vol.33 , pp. 855-870
- Dexter, R.J.¹ Hudak, S.J.² Davidson, D.L.³

19
- 0001094381
- The result of a test program based on a gust spectrum with variable amplitude loading
- (1962) Aircraft Engng. , vol.34 , pp. 314-316
- Shijve, J.¹ Broek, D.²

20
- 0004210733
- McGraw-Hill, NY, New York, USA
- (1959) Metal Fatigue
- Christensen, R.H.¹

21
- 0015665575
- Fatigue crack growth retardation after single-cycle peak overload in Ti-6Al-4V titanium alloy
- (1973) Engng Fract. Mech. , vol.5 , pp. 585-604
- Jones, R.E.¹

22
- 0020591646
- Micromechanisms of fatigue crack growth retardation following overloads
- (1983) Engng Fract. Mech. , vol.18 , pp. 577-593
- Suresh, S.¹

23
- 85169585010
- Fatigue crack-tip mechanics in 7075-T6 aluminium alloy from high-sensitivity displacement field measurements
- ASTM STP 995, (Edited by A. Saxena, J. D. Landes and J. L. Bassani). American Society for Testing and Materials, Philadelphia, PA, USA
- (1988) Nonlinear Fracture Mechanics, Volume I , vol.1 , pp. 415-432
- Nicoletto, G.¹

24
- 0012906132
- Standard test method for measurements of fatigue crack growth rates
- ASTM E 647. American Society for Testing and Materials, Philadelphia, PA, USA
- (1995) Annual Book of ASTM Standards, Volume 03.01 , pp. 562-598

25
- 85121111871
- A comparison of measurement methods and numerical procedures for the experimental characterization of fatigue crack closure
- ASTM STP 982, (Edited by J. C. Newman, Jr and W. Elber). American Society for Testing and Materials, Philadelphia, PA, USA
- (1988) Mechanics of Fatigue Crack Closure , pp. 171-185
- Allison, J.E.¹ Ku, R.C.² Pompetzki, M.A.³

26
- 0025665498
- Effect of specimen geometry on fatigue crack growth in plane strain-I. Constant amplitude response
- (1990) Fatigue Fract. Engng Mater. Struct. , vol.13 , pp. 287-296
- Shercliff, H.R.¹ Fleck, N.A.²

27
- 0030189288
- c threshold procedures
- (1996) Fatigue Fract. Engng Mater. Struct. , vol.19 , pp. 949-954
- Clark, T.R.¹ Herman, W.A.² Hertzberg, R.W.³ Jaccard, R.⁴

28
- 0018307811
- The effect of stress ratio on fatigue crack growth rates in steels
- (1979) Engng Fract. Mech. , vol.11 , pp. 595-602
- Vosikovsky, O.¹

29
- 0033227521
- Service load fatigue damage-a historical perspective
- (1999) Int. J. Fatigue , vol.21
- Paris, P.C.¹ Tada, H.² Donald, J.K.³

30
- 0033227627
- eff estimation procedures on 6061-T6 and 2024-T3 aluminium alloys
- (1999) Int. J. Fatigue , vol.21
- Donald, K.¹ Paris, P.C.²

* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.