Advances in development of J-integral experimental estimation, testing and standardization

American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

Volumn 6, Issue PARTS A AND B, 2011, Pages 1239-1246

  Zhu, Xian Kui ^a  

^a BATTELLE MEMORIAL INSTITUTE   (United States)

Author keywords

ASTM E1820; Experimental estimation; Fracture test; J integral; J R curve

Indexed keywords

ASTM E1820; ELASTIC-PLASTIC FRACTURE MECHANICS; EXPERIMENTAL ESTIMATIONS; FRACTURE MECHANICS ANALYSIS; FRACTURE TOUGHNESS TESTING; J INTEGRAL; J-R CURVE; STRUCTURAL INTEGRITY ASSESSMENT;

DUCTILITY; ELASTOPLASTICITY; FRACTURE MECHANICS; FRACTURE TESTING; FRACTURE TOUGHNESS; PRESSURE VESSELS; STANDARDIZATION; TESTING;

ESTIMATION;

EID: 84881413787     PISSN: 0277027X     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/PVP2011-57174     Document Type: Conference Paper

References (37)

1. Rice, J.R., 1968, "A path independent integral and the approximate analysis of strain concentration by notches and cracks," Journal of Applied Mechanics, Vol. 35, pp. 379-386.
2. Begley, J.A. and Landes, J.D., 1972, "The J-integral as a fracture criterion," Fracture Mechanics, ASTM STP 515, pp. 1-23.
3. IC," Fracture Mechanics, ASTM STP 515, pp. 24-39.
4. ASTM E1820-09, Standard Test Method for Measurement of Fracture Toughness. American Society for Testing and Materials, West Conshohocken, PA, USA, 2010.
5. Hutchinson, J.W., 1968, "Singular behavior at the end of a tensile crack in a hardening material," Journal of the Mechanics of Physics and Solids, Vol. 16, pp. 13-31.
6. Rice, J.R. and Rosengren, G.F., 1968, "Plane strain deformation near a crack tip in a power law hardening material," Journal of the Mechanics of Physics and Solids, Vol. 16, pp. 1-12.
7. Rice, J.R., Paris, P.C., and Merkle, J.G., 1973, "Some further results of J-integral analysis and estimates," Progress in Flaw Growth and Fracture Toughness Testing, ASTM STP 536, pp. 231-245.
8. Landes, J.D., Walker, H., and Clarke, G.A., 1979, "Evaluation of estimation procedures used in J-integral testing," Elastic-Plastic Fracture, ASTM STP 668, pp. 266-287.
9. Merkle, J.G. and Corten, H.T., 1974, "A J integral analysis for the compact specimen, considering axial force as well as bending effects," Journal of Pressure Vessel Technology, Vol. 96, pp. 286-292.
10. Clarke, G.A. and Landes, J.D., 1979, "Evaluation of the J-integral for the compact specimen," Journal of Testing and Evaluation, Vol. 7, pp. 264-269.
11. C determination for shallow notch welded bend specimens," Fatigue and Fracture of Engineering Materials and Structures, Vol. 10, pp. 479-493.
12. Ic, a Measure of Fracture Toughness, American Society for Testing and Materials, West Conshohocken, PA, USA, 1982.
13. IC determination," Mechanics of Crack Growth, ASTM STP 590, pp. 27-42.
14. Garwood, S.J., Robinson, J.N. and Turner, C.E., 1975, "The Measurement of Crack Growth Resistance Curves (R-Curves) Using the J Integral," International Journal of Fracture, Vol. 11, pp. 528-530.
15. Etemad, M.R. John, S.J. and Turner, C.E., 1988, "Elastic-plastic R-curves for large amounts of crack growth," Fracture Mechanics: Eighteenth Symposium, ASTM STP 945, pp. 986-1004.
16. Ernst, H.A., Paris, P.C. and Landes, J.D., 1981, "Estimations on J-integral and tearing modulus T from a single specimen test record," Fracture Mechanics: Thirteenth Conference, ASTM STP 743, pp. 476-502.
17. ASTM E1152-87, Standard Test Method for Determining J-R curves, American Society for Testing and Materials, West Conshohocken, PA, USA, 1987.
18. Kirk, M.T. and Dodds, R.H., 1993, "J and CTOD estimation equations for shallow cracks in single edge notch bend specimens," Journal of Testing and Evaluation, Vol. 21, pp. 228-238.
19. R curve," Engineering Fracture Mechanics, Vol. 75, pp. 236-252.
20. Kroon, M., Faleskog, J. and Oberg, H., 2008, "A probabilistic model for cleavage fracture with a length scale - parameter estimation and predictions of growing crack experiments," Engineering Fracture Mechanics, Vol. 75, pp. 2398-2417.
21. Zhu, X.K. and Joyce, J.A., 2010, "More accurate approximation of J-integral equation for evaluating fracture resistance curves," Journal of ASTM International, Vol. 7, No. 1, Paper ID JAI102505.
22. Tyson, B. and Park, D., 2009, "Modified E1820 J-integral equation (A1.8) to allow larger increments between unloading," Presented in ASTM E08.07.05 Task Group Meeting, Atlanta, GA, USA, November 10, 2009.
23. Zhu, X.K. and Leis, B.N., 2010, "Improved incremental J-integral equation for determining crack growth resistance curves," Proceedings of 2010 ASME Pressure Vessels and Piping Conference, Bellevue, Washington, July 18-22, 2010.
24. Herrera, R., Landes, J.D., 1988, "Direct J-R curve analysis of fracture toughness test," Journal of Testing and Evaluation, Vol. 16, pp. 427-449.
25. Landes, J.D., Zhou, Z., Lee, K., Herrera, R., 1991, "Normalization method for developing J-R curves with the LMN function," Journal of Testing and Evaluation, Vol. 19, pp. 305-311.
26. Joyce, J.A., 2001, "Analysis of a high rate round robin based on proposed annexes to ASTM E 1820," Journal of Testing and Evaluation, Vol. 29, pp. 329-351.
27. Zhu, X.K., Joyce, J.A., 2007, "J-resistance curve testing of HY80 steel using SE(B) specimens and normalization method," Engineering Fracture Mechanics, Vol. 74, pp. 2263-2281.
28. Zhu, X.K., Leis, B.N., 2008, "Fracture resistance curve testing of X80 pipeline steel using SENB specimen and normalization method," Journal of Pipeline Engineering, Vol. 7, pp.126-136.
29. Zhu, X.K., Lam, P.S., Chao, Y.J., 2009, "Applications of normalization method to experimental measurement of fracture toughness for A285 carbon steel. International Journal of Pressure Vessels and Piping, Vol. 86, pp. 599-603.
30. Wallin, K. and Laukkanen, A., 2004, "Improved crack growth corrections for J-R curve testing," Engineering Fracture Mechanics, Vol. 71, pp. 1601-1614.
31. Zhu, X.K, Leis, B.N. and Joyce, J.A., 2008, "Experimental evaluation of J-R curves from load-CMOD record for SE(B) specimens," Journal of ASTM International, Vol. 5, Paper ID: JAI101532.
32. Cravero, S., Ruggieri, C., 2007, "Further developments in J evaluation procedure for growing cracks based on LLD and CMOD data," International Journal of Fracture, Vol. 148, pp. 387-400.
33. th Volume, ASTM STP 1360, pp. 3-19.
34. ASTM E1737-96, Standard Test Method for J-integral Characterization of Fracture Toughness, American Society for Testing and Materials, West Conshohocken, PA, USA, 1996.
35. ASTM E1820-96, Standard Test Method for Measurement of Fracture Toughness, American Society for Testing and Materials, West Conshohocken, PA, USA, 1996.
36. Joyce, J.A., Manual on Elastic-Plastic Fracture: Laboratory Test Procedures, ASTM Manual Series: MNL27, 1996.
37. Zhu, X.K., 2009, "J-integral resistance curve testing and evaluation," Journal of Zhejiang University Science A, Vol. 10, pp. 1541-1560.