Elastic-plastic fracture mechanics: Where has it been? Where is it going?

ASTM Special Technical Publication

Volumn , Issue 1360, 1999, Pages 3-18

  Landes, John D ^a  

^a UNIVERSITY OF TENNESSEE   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ELASTOPLASTICITY; HISTORY; TECHNOLOGICAL FORECASTING;

ELASTIC PLASTIC FRACTURE MECHANICS (EPFM);

FRACTURE MECHANICS;

EID: 0033337491     PISSN: 10403094     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (55)

1. Rice, J. R., "A Path Independent Integral and the Approximate Analysis of Strain Concentrations by Notches and Cracks," Journal of Applied Mechanics, Vol. 35, 1968, pp. 379-386.
2. Rice, J. R. and Rosengren, G. F., "Plane Strain Deformation Near a Crack Tip in a Power Hardening Material," Journal of the Mechanics and Physics of Solids, Vol. 16, 1968, pp. 1-12.
3. Hutchinson, G. W., "Singular Behavior near the End of a Tensile Crack Tip in a Hardening Material," Journal of the Mechanics and Physics of Solids, Vol. 16, 1968, pp. 13-31.
4. McClintock, F. A., "Plasticity Aspects of Fracture," Fracture, H. Liebowitz, Ed., Vol. 3, Academic Press, New York, 1971, pp. 47-225.
5. Rice, J. R., "Mathematical Analysis in the Mechanics of Fracture, Fracture, H. Liebowitz, Ed., Vol. 2, Academic Press, New York, 1971, pp. 191-311.
6. Irwin, G. R. "Analysis of Stresses and Strains Near the End of a Crack Traversing a Plate," Journal of Applied Mechanics, Transactions of ASME, Vol. 24, 1957, pp. 361-364.
7. Rice, J. R., Paris, P. C., and Merkle, J. G., "Some Further Results of the J-Integral Analysis," Progress in Flaw Growth and Fracture Toughness Testing, ASTM STP 536, American Society for Testing and Materials, 1973, pp. 231-245.
8. Begley, J. A. and Landes, J. D., "The J-Integral as a Fracture Criterion," Fracture Toughness, Proceedings of the 1971 National Symposium on Fracture Mechanics Part II, ASTM STP 514, American Society for Testing and Materials, 1972, pp. 1-26.
9. Ic," Fracture Toughness, Proceedings of the 1971 National Symposium on Fracture Mechanics, ASTM STP 514, American Society for Testing and Materials, 1972, pp. 24-39.
10. Begley, J. A. and Landes, J. D., "Serendipity and the J Integral," International Journal of Fracture, Vol. 12, Noordhoff International Publishing, 1976, pp. 764-766.
11. Wells, A. A., "Unstable Crack Propagation in Metals: Cleavage and Fast Fracture," Proceedings of the Crack Propagation Symposium, Vol. 1, Paper 84, Cranfield, UK, 1961.
12. ASTM E 399, "Test Method for Plane-Strain Fracture Toughness of Metallic Materials," ASTM, Annual Book of Standards, Vol. 03.01.
13. Ic, a Measure of Fracture Toughness, ASTM E 813-81, ASTM Annual Book of Standards, Vol. 03.01.
14. Dawes, M. G., "Elastic-Plastic Fracture Toughness Based on CTOD and J-Contour Integral Concepts," Elastic-Plastic Fracture, ASTM STP 668, J. D. Landes, J. A. Begley, and G. A. Clarke, Eds., American Society for Testing and Materials, 1979, pp. 307-333.
15. Witt, F. W., "Fracture Behavior of Reactor Pressure Vessel Steel in the Frangible, Transitional and Tough Regimes," Nuclear Engineering and Design, Vol. 20, 1972, pp. 237-249.
16. Liebowitz, H. and Eftis, J. "On Nonlinear Effects in Fracture Mechanics," Engineering Fracture Mechanics, Vol. 3, 1971, p. 267.
17. Hellman, D. and Schwalbe, K.-H., "Geometry and Size Effects on J-R and δ-R Curves Under Plane Stress Conditions," Fracture Mechanics: Fifteenth Symposium, ASTM STP 833, R. J. Sanford, Ed., American Society for Testing and Materials, 1984, pp. 577-605.
18. Griffis, C. A. and Yoder, G. R., "Initial Crack Extension in Two Intermediate Strength Aluminum Alloys," Journal of Engineering Materials and Technology, Transactions, American Society of Mechanical Engineers, Series H, Vol. 98, No. 2, April 1976, pp. 152-158.
19. Yoder, G. R. and Griffis, C. A., "Application of the J-Integral to the initiation of Crack Extension in a Titanium 6AL-4v Alloy," Mechanics of Crack Growth, ASTM STP 590, American Society for Testing and Materials, 1976, pp. 61-81.
20. c," Cracks and Fracture, ASTM STP 601, American Society for Testing and Materials, 1976, pp. 3-18.
21. Merkle, J. G. and Corten, H. T. "A J Integral Analysis for the Compact Specimen, Considering Axial Force as Well as Bending Effects," Journal of Pressure Vessel Technology, ASME, Vol. 96, Series J. No. 4, November 1974, pp. 286-292.
22. McMeeking, R. M. and Parks, D. M., "On Criteria for J-Dominance of Crack Tip Fields in Large-Scale Yielding," Elastic-Plastic Fracture, ASTM STP 668, J. D. Landes, J. A. Begley, and G. A. Clarke, Eds., American Society for Testing and Materials, 1979, pp. 175-194.
23. Ic Determination," Mechanics of Crack Growth, ASTM STP 590, American Society for Testing and Materials, 1976, pp. 24-42.
24. Ic Testing of Navy Alloys," Elastic-Plastic Fracture, ASTM STP 668, J. D. Landes, J. A. Begley, and G. A. Clarke, Eds., American Society for Testing and Materials, 1979, pp. 451-468.
25. Dowling, N. E. and Begley, J. A., "Fatigue Crack Growth During Gross Plasticity" Mechanics of Crack Growth, ASTM STP 590, American Society for Testing and Materials, 1976, pp. 82-103.
26. Landes, J. D. and Begley, J. A., "A Fracture Mechanics Approach to Creep Crack Growth," Mechanics of Crack Growth, ASTM STP 590, American Society for Testing and Materials, 1976, pp. 128-148.
27. Kumar, V., German, M. D., and Shih, C. F., "An Engineering Approach for Elastic-Plastic Fracture Analysis," NP 1931, EPRI Project 1237-1, July 1981.
28. Tada, H., Paris, P. C., and Irwin, G. R., "The Stress Analysis of Cracks Handbook," Paris Productions Inc., St. Louis, MO, 1985.
29. Paris, P. C., Tada, H., Zuhoor, A., and Ernst, H. A., "The Theory of Instability of the Tearing Mode of Elastic-Plastic Crack Growth," Elastic Plastic Fracture, ASTM STP 668, J. D. Landes, J. A. Begley, and G. A. Clarke, Eds., American Society for Testing and Materials, 1979, pp. 5-36.
30. Paris, P. C. and Johnson, R. E., "A Method of Application of Elastic-Plastic Fracture Mechanics to Nuclear Vessel Analysis," Elastic-Plastic Fracture: Second Symposium, Volume II - Fracture Resistance Curves and Engineering Applications, ASTM STP 803, C. F. Shih and J. P. Gudas, Eds., American Society for Testing and Materials, 1983, pp. II-5-II-40.
31. Hutchinson, J. W. and Paris, P. C., "Stability Analysis of J-Controlled Crack Growth," Elastic-Plastic Fracture, ASTM STP 668, J. D. Landes, J. A Begley, and G. A. Clarke, Eds., American Society for Testing and Materials, 1979, pp. 37-64.
32. Elastic Plastic Fracture, ASTM STP 668, J. D. Landes, J. A. Begley, and G. A. Clarke, Eds., American Society for Testing and Materials, 1979.
33. Elastic-Plastic Fracture: Second Symposium, Vol. I - Inelastic Crack Analysis, ASTM STP 803, C. F. Shih and J. P. Gudas, Eds., American Society for Testing and Materials, 1983.
34. Elastic-Plastic Fracture: Second Symposium, Vol. II - Fracture Resistance Curves and Engineering Applications, ASTM STP 803, C. F. Shih and J. P. Gudas, Eds., American Society for Testing and Materials, 1983.
35. Ic, a Measure of Fracture Toughness," ASTM E 813-88, ASTM Annual Book of Standards, Vol. 03.01.
36. "Standard Test Method for Determining J-R Curves," ASTM E 1152-87, ASTM Annual Book of Standards, Vol. 03.01.
37. "Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement," ASTM E 1290-89, ASTM Annual Book of Standards, Vol. 03.01.
38. "Standard Method for J-Integral Characterization of Fracture Toughness," ASTM E 1737-96, ASTM, Annual Book of Standards, Vol. 03.01.
39. "Standard Method for Measurement of Fracture Toughness," ASTM E 1820-96, Annual Book of Standards, Vol. 03.01.
40. Xia, L. and Shih, C. F. "Ductile Crack Growth - I. A Numerical Study Using Computational Cells with Microstructurally Based Length Scales," presented at the NRC Workshop on Constraint Effects in Fracture No. 2, 20 April 1994, Annapolis, MD.
41. Dawicke, D. S., Sutton, M. A., Newman, J. C. Jr., and Bigelow, C. A., "Measurement and Analysis of Critical CTOA for an Aluminum Alloy Sheet," Fracture Mechanics: 25th Volume, ASTM STP 1220, F. Erdogan, Ed, American Society for Testing and Materials, 1995, pp. 358-379.
42. Turner, C. E. and Kolednik, O., "Application of Energy Dissipation Rate Arguments to Stable Crack Growth," Fatigue and Fracture of Engineering Materials and Structures, Vol. 17, No. 10, October 1993, pp. 1109-1127.
43. Milne, I., Ainsworth, R. A., Dowling, A. R., and Stewart, A. T., "Assessment of the Integrity of Structures Containing Defects," Central Electricity Generating Board Report R/H/R6-Rev-3, May 1986.
44. Bloom, J. M., "Validation of a Deformation Plasticity Failure Assessment Diagram Approach to Flaw Evaluation," Elastic-Plastic Fracture: Second Symposium, Volume II - Fracture Resistance Curves and Engineering Applications, ASTM STP 803, C. F. Shih and J. P. Gudas, Eds., American Society for Testing and Materials, 1983, pp. II-206-II-238.
45. Landes, J. D., Zhou, Z., and Brown, K. H., "An Application Methodology for Ductile Fracture Mechanics," Fracture Mechanics: Twenty-Third Symposium, ASTM STP 1189, Ravinder Chona, Ed., American Society for Testing and Materials, 1993, pp. 229-264.
46. Schwalbe, K.-H. and Cornec, A., "The Engineering Treatment Model (ETM) and Its Practical Application," Fatigue and Fracture of Engineering Materials and Structures, Vol. 14, No. 4, 1991, pp. 405-412.
47. Constraint Effects in Fracture, ASTM STP 1171, E. M. Hackett, K-H. Schwalbe, and R. H. Dodds, Eds., American Society for Testing and Materials, 1993.
48. Constraint Effects in Fracture: Theory and Applications, ASTM STP 1244, Mark Kirk and Ad Bakker, Eds., American Society for Testing and Materials, 1994.
49. Hancock, J. W., Reuter, W. G., and Parks, D. M., "Constraint and Toughness Parameterized by T," Constraint Effects in Fracture, ASTM STP 1171, E. M. Hackett et. al., Eds., American Society for Testing and Materials, 1993, pp. 21-40.
50. O'Dowd, N. P. and Shih, C. F., "Family of Crack-Tip Fields Characterized by a Triaxiality Parameter: Part I - Structure of Fields," Journal of the Mechanics and Physics of Solids, Vol. 39, 1991, pp. 989-1015.
51. O'Dowd, N. P. and Shih, C. F., "Family of Crack-Tip Fields Characterized by a Triaxiality Parameter: Part II - Fracture Applications," Journal of the Mechanics and Physics of Solids, Vol. 40, 1992, pp. 939-963.
52. Anderson, T. L. and Dodds, R. H., "Specimen Size Requirements for Fracture Testing in the Transition Region," Journal of Testing and Evaluation, JTEVA, American Society for Testing and Materials, Vol. 19, 1991, pp. 123-134.
53. Proceedings, Shallow Crack Fracture Mechanics, Toughness Tests and Applications, M. G. Dawes, Technical Director, TWI Conference, September 1992.
54. Wallin, K., "Statistical Modeling of Fracture in the Ductile to Brittle Transition Region," Defect Assessment in Components - Fundamentals and Applications, J. G. Blauel and K. H. Schwalbe, Eds., ESIS/EGF9, 1991, pp. 1-31.
55. Wallin, K., "Fracture Toughness Transition Curve Shape for Ferritic Structural Steels," Proceedings of the Joint FEFG/ICF International Conference on Fracture of Engineering Materials, Singapore, 6-8 August 1991, pp. 83-88.