Experimental estimation of J-R curves from load-CMOD record for SE(B) specimens

Journal of ASTM International

Volumn 5, Issue 5, 2008, Pages

  Zhu, Xian Kui ^a   Leis, Brian N ^a   Joyce, James A ^b  

^a BATTELLE MEMORIAL INSTITUTE   (United States)

^b UNITED STATES NAVAL ACADEMY   (United States)

Author keywords

Crack extension; Crack mouth opening displacement (cmod); Fracture toughness testing; JR curve; Load line displacement (LLD); SE(B) specimen

Indexed keywords

CRACK EXTENSION; CRACK MOUTH OPENING DISPLACEMENT; FRACTURE TOUGHNESS TESTING; J-R CURVE; LOAD-LINE DISPLACEMENT;

COMPUTATIONAL GEOMETRY; COST REDUCTION; CRACKS; DUCTILE FRACTURE; FRACTURE TESTING; LOAD TESTING; NAVIGATION; SPONTANEOUS EMISSION; STRAIN HARDENING; STRUCTURAL ANALYSIS; UNLOADING;

FRACTURE TOUGHNESS;

EID: 67650948030     PISSN: None     EISSN: 1546962X     Source Type: Journal    
DOI: 10.1520/JAI101532     Document Type: Article

References (30)

1. Rice, J. R., "A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks," J. Appl. Mech., Vol.35, 1968, pp. 379-386.
2. Hutchinson, J. W., "Singular Behavior at the End of a Tensile Crack in a Hardening Material," J. Mech. Phys. Solids, Vol.16, 1968, pp. 13-31.
3. Rice, J. R. and Rosengren, G. F., "Plane Strain Deformation Near a Crack Tip in a Power Law Hardening Material," J. Mech. Phys. Solids, Vol.16, 1968, pp. 1-12.
4. Begley, J. A. and Landes, J. D., "The J-integral as a Fracture Criterion," Fracture Mechanics, ASTM STP 515, ASTM International, West Conshohocken, PA, 1972, pp. 1-23.
5. IC," Fracture Mechanics, ASTM STP 515, ASTM International, West Conshohocken, PA, 1972, pp. 24-39.
6. Rice, J. R., Paris, P. G., and Merkle, J. G., "Some Further Results of J-integral Analysis and Estimates," Progress in Flaw Growth and Fracture Toughness Testing, ASTM STP 536, ASTM International, West Conshohocken, PA, 1973, pp. 231-245.
7. Merkle, J. and Corten, H., "A J-integral Analysis for the Compact Specimen, Considering Axial Force as Well as Bending Effects," J. Pressure Vessel Technol., Vol.96, 1974, pp. 286-292.
8. c (Contour Integral for Fracture Analysis)," Cracks and Fracture, ASTM STP 601, ASTM International, West Conshohocken, PA, 1976, pp. 3-18.
9. Hutchinson, J. W. and Paris, P. C., "Stability Analysis of J-Controlled Crack Growth," Elastic-Plastic Fracture, ASTM STP 668, ASTM International, West Conshohocken, PA, 1979, pp. 37-64.
10. IC Determination," Mechanics of Crack Growth, ASTM STP 590, ASTM International, West Conshohocken, PA, 1976, pp. 27-42.
11. Ernst, H. A., Paris, P. C., and Landes, J. D., "Estimations on J-integral and Tearing Modulus T from a Single Specimen Test Record," Fracture Mechanics: 13th Conference, ASTM STP 743, ASTM International, West Conshohocken, PA, 1981, pp. 476-502.
12. Joyce, J. A., Ernst, H., and Paris, P. C., "Direct J-R Curve Analysis: A Guide to the Methodology," Fracture Mechanics: 12th National Symposium, ASTM STP 700, ASTM International, West Conshohocken, PA, 1980, pp. 222-236.
13. Bakker, A., "A DC Potential Drop Procedure for Crack Initiation and R-Curve Measurements During Ductile Fracture Tests," Elastic-Plastic Fracture Test Methods: The User's Experience, ASTM STP 586, ASTM International, West Conshohocken, PA, 1985, pp. 394-410.
14. Landes, J. D., Zhou, Z., Lee, K., and Herrera, R., "Normalization Method for Developing J-R curves with the LMN Function," J. Test. Eval., Vol.19, 1991, pp. 305-311. (Pubitemid 21666504)
15. Kirk, M. T. and Dodds, R. H., "J and CTOD Estimation Equations for Shallow Cracks in Single Edge Notch Bend Specimens," J. Test. Eval., Vol.21, 1993, pp. 228-238.
16. Nevalainen, M. and Dodds, R. H., "Numerical Investigation of 3-D Constraint Effects on Brittle Fracture in SE(B) and C(T) Specimens," Int. J. Fract, Vol.74, 1995, pp. 131-161. (Pubitemid 126839536)
17. Kim, Y. J., Kim, J. S., Cho, S. M., and Kim, Y. J., "3-D Constraint Effects on J Testing and Crack Tip Constraint in M(T), SE(B), SE(T), C(T) Specimens: Numerical Study," Eng. Fract. Mech., Vol.71, 2004, pp. 1203-1218.
18. Donato, G. H. B. and Ruggieri, C., "Estimation Procedure for J and CTOD Fracture Parameters Using Three-Point Bend Specimens," Proceedings of the 6th International Pipeline Conference, Sept. 25-29, 2006, Calgary, Canada, Paper Number: IPC2006-10165.
19. Kim, Y. J. and Schwalbe, K. H., "On Experimental J Estimation Equations Based on CMOD for SE(B) Specimen," J. Test. Eval, Vol.29, 2001, pp. 67-71.
20. c Determination for Shallow Notch Welded Bend Specimens," J. Mech. Phys. Solids, Vol.26, 1987, pp. 479-493.
21. Morrison, J. and Karisallen, K. J., "An Experimental Comparison of J and CTOD Estimation Formulas," Eng. Fract. Mech., Vol.51, 1995, pp. 145-149.
22. Wang, Y. Y., Reemsnyder, H. S., and Kirk, M. T., "Inference Equations for Fracture Toughness Testing: Numerical Analysis and Experimental Verification," Fatigue and Fracture Mechanics: 28th Volume, ASTM STP 1321, ASTM International, West Conshohocken, PA, 1997, pp. 469-484.
23. Wallin, K. and Laukkanen, A., "Improved Crack Growth Corrections for J-R Curve Testing," Eng. Fract. Mech., Vol.71, 2004, pp. 1601-1614. (Pubitemid 38345832)
24. Wu, S. X., Mai, Y. W., and Cotterell, B., "Plastic Rotation Factors of Three-Point Bend and Compact Tension Specimens," J. Test. Eval., Vol.16, 1988, pp. 555-557.
25. Wu, S. X., Mai, Y. W., and Cotterell, B., "Plastic η-Factor of Fracture Specimens with Deep and Shallow Cracks," Int. J. Fract., Vol.45, 1990, pp. 1-18.
26. IC Test and data Analysis Procedures for High-Strength Steels," Fracture Mechanics, 24th Symposium, ASTM STP 1207, ASTM International, West Conshohocken, PA, 1994, pp. 410-421.
27. Joyce, J. A., "J-Resistance Curve Testing of Short Crack Bend Specimens Using Unloading Compliance," Fracture Mechanics: 22nd Symposium, ASTM STP 1131, ASTM International, West Conshohocken, PA, Vol.I, 1992, pp. 904-924.
28. Zhu, X. K. and Joyce, J. A., "J-Resistance Curve Testing of HY80 Steel Using SE(B) Specimens and Normalization Method," Eng. Fract. Mech., Vol.74, 2007, pp. 2263-2281.
29. Joyce, J. A., Hackett, E. M., and Roe, C., "Effect of Crack Depth and Mode of Loading on the J-R Curve Behavior of a High-Strength Steel," Constraint Effects in Fracture, ASTM STP 1171, ASTM International, West Conshohocken, PA, 1993, pp. 239-263.
30. Joyce, J. A. and Link, R. E., "Application of Two Parameter Elastic-Plastic Fracture Mechanics to Analysis of Structures," Eng. Fract. Mech., Vol.57, 1997, pp. 431-446.