Is the road quality still better?

Journal of Transportation Engineering

Volumn 138, Issue 12, 2012, Pages 1520-1529

  Mú́cka, Peter ^a   Granlund, Johan ^b  

^a INSTITUTE OF MATERIALS AND MACHINE MECHANICS   (Slovakia)

^b Chief Technology Officer: Road Operation and Maintenance   (Sweden)

Author keywords

Half car model; International roughness index (IRI); Ride comfort; Ride quality; Road profile

Indexed keywords

ROADS AND STREETS;

HALF-CAR MODEL; INTERNATIONAL ROUGHNESS INDEX; RIDE COMFORTS; RIDE QUALITY; ROAD PROFILE; ROAD QUALITY; ROUGHNESS INDEX; VIBRATION RESPONSE; WAVE AMPLITUDES; WAVEBANDS;

MODEL AUTOMOBILES;

ALGORITHM; AMPLITUDE; QUALITATIVE ANALYSIS; ROAD; SURFACE ROUGHNESS; VIBRATION; WAVELENGTH;

EID: 84881245222     PISSN: 0733947X     EISSN: None     Source Type: Journal    
DOI: 10.1061/(asce)te.1943-5436.0000460     Document Type: Article

References (33)

1. Ahlin, K., and Granlund, J. (2002). "Relating road roughness and vehicle speeds to human whole body vibration and exposure limits." Int. J. Pavement Eng., 3(4), 207-216.
2. Andrén, P. (2006). "Power spectral density approximations of longitudinal road profiles." Int. J. Veh. Des., 40(1/2/3), 2-14.
3. ASTM. (2008). "Standard practice for computing International Roughness Index of roads from longitudinal profile measurements." E1926-08, West Conshohocken, PA.
4. Ayenu-Prah, A. Y., and Attoh-Okine, N. O. (2009). "Comparative study of Hilbert-Huang transform, Fourier transform and wavelet transform in pavement profile analysis." Veh. Syst. Dyn., 47(4), 437-456.
5. Braun, H. (1991). "Collection and evaluation of road roughness data. Studies and comparison of different instruments and evaluation for suitability for routine detection and evaluation of the evenness condition." Forschung Strassenbau und Strassenverkehrstechnik, Issue No. 598, Federal Ministry of Transport, Bonn-Bad Godesberg, Germany (in German).
6. Cantisani, G., and Loprencipe, G. (2010). "Road roughness and whole body vibration: evaluation tools and comfort limits." J. Transp. Eng., 136(9), 818-826.
7. Delanne, Y., and Pereira, P. A. A. (2001). "Advantages and limits of different road roughness profile signal-processing procedures applied in Europe." Transportation Research Record 1764, Transportation Research Board, Washington, DC, 254-259.
8. Doré, G., Flamand, M., and Pascale, P. (2002). "Analysis of the wavelength content of the longitudinal profiles for C-LTPP test sections." Can. J. Civ. Eng., 29(1), 50-57.
9. European Committee for Standardization (CEN). (2006). "Road and airfield surface characteristics: Test methods. Part 5: Determination of longitudinal unevenness indices." prEN 13036-5:2006, Brussels, Belgium.
10. Hou, X., Liang, X., Ma, S., and Hua, W. (2009). "The analysis of the correlation between International Roughness Index and body ride comfort." Proc., 9th Int. Conf. of Chinese Transportation Professionals ICCTP 2009: Critical Issues in Transportation System Planning, Development, and Management, ASCE, Reston, VA, Vol. 358, 2554-2561.
11. ISO. (1995). "Mechanical vibration-Road surface profiles-Reporting of measured data." ISO 8608:1995, Geneva.
12. ISO. (1997). "Mechanical vibration and shock: Evaluation of human response to whole-body vibration. -Part 1: General requirements." ISO 2631-1:1997, Geneva.
13. ISO. (2001). "Mechanical vibration and shock: Range of idealized values to characterize seated-body biodynamic response under vertical vibration." ISO 5982:2001, Geneva.
14. Kavussi, A. (2004). "Analysis of rutting and roughness distresses in PCC pavements overlaid with asphalt concrete." Proc., 2nd Int. Congress Societa Italiana Infrastrutture Viarie, Univ. of Florence, Florence.
15. Kropáč, O., and Múčka, P. (2003). "Relations between characteristics of longitudinal unevenness of roads: A review." Strojnícky časopis, 54(1&3) 49-64 & 188-194.
16. Kropáč, O., and Múčka, P. (2005). "Be careful when using the International Roughness Index as an indicator of road unevenness." J. Sound Vib., 287(4-5), 989-1003.
17. Kropáč, O., and Múčka, P. (2008a). "Effect of obstacles on roads with different waviness values on the vehicle response." Veh. Syst. Dyn., 46(3), 155-178.
18. Kropáč, O., and Múčka, P. (2008b). "Indicators of longitudinal unevenness of roads in the USA." Int. J. Veh. Des., 46(4), 393-415.
19. Kropáč, O., and Múčka, P. (2009). "Effects of longitudinal road waviness on vehicle vibration response." Veh. Syst. Dyn., 47(2), 135-153.
20. Kropáč, O., and Múčka, P. (2011). "Specification of obstacles in the longitudinal road profile by median filtering." J. Transp. Eng., 137(3), 214-226.
21. Loizos, A., and Plati, C. (2008). "An alternative approach to pavement roughness evaluation." Int. J. Pavement Eng., 9(1), 69-78.
22. Magnusson, G., Dahlstedt, S., and Sjögren, L. (2002). "Measurements of the road surface longitudinal unevenness-methods and necessary accuracy." VTI Rep. No. 475, Swedish National Road and Transport Institute, Sweden (in Swedish).
23. Múčka, P., and Granlund, J. (2012). "Comparison of longitudinal unevenness of old and repaired highway lanes." J. Transp. Eng., 138(3), 371-380.
24. Múčka, P., and Kropáč, O. (2009a). "Sensitivity of road unevenness indicators to road waviness." J. Test. Eval., 37(2), 139-149.
25. Múčka, P., and Kropáč, O. (2009b). "Properties of random component of longitudinal road profile influenced by local obstacles." Int. J. Veh. Syst. Modell. Test., 4(4), 256-276.
26. Papagiannakis, A. T., and Woodrooffe, J. H. F. (1989). "Suitability of alternative pavement roughness statistics to describe dynamic axle loads of heavy vehicles." Proc., 2nd Int. Symposium on Heavy Vehicle Weights and Dimensions, Transportation Association of Canada, Ottawa, Canada.
27. Perera, R., and Kohn, S. (2004). "Effects of variation in quarter-car simulation speed on International Roughness Index algorithm." Transportation Research Record 1889, Transportation Research Board, Washington, DC, 144-151.
28. Prem, H., and Ayton, G. (2005). "Improved techniques for assessing ride quality on concrete pavements." Proc., 8th Int. Conf. on Concrete Pavements: Innovations for Concrete Pavement: Technology Transfer for the Next Generation, Concrete Pavement Association, Washington, DC, Vol. 2, 733-754.
29. Rouillard, V., and Sek, M. A. (2002). "Statistical modeling of predicted non-stationary vehicle vibrations." Packag. Technol. Sci., 15(2), 93-101.
30. Sayers, M. W. (1995). "On the calculation of IRI from longitudinal road profile." Transportation Research Record 1501, Transport Research Board, Washington, DC.
31. Stein, J., and Múčka, P. (2003). "Theoretical investigation of a linear planar model of a passenger car with seated people." Proc. Inst. Mech. Eng. D (J. Automob. Eng.), 217(4), 257-268.
32. Sun, L. (2003). "Simulating pavement surface roughness and IRI based on power spectral density." Math. Comput. Simul., 61(2), 77-89.
33. Sun, L., Zhang, Z., and Ruth, J. (2001). "Modeling indirect statistics of surface roughness." J. Transp. Eng., 127(2), 105-111.