Corrosion of ultra-high-purity Mg in 3.5% NaCl solution saturated with Mg(OH)2

Corrosion Science

Volumn 75, Issue , 2013, Pages 78-99

  Cao, Fuyong ^a   Shi, Zhiming ^a   Hofstetter, Joelle ^b   Uggowitzer, Peter J ^b   Song, Guangling ^c   Liu, Ming ^d   Atrens, Andrej ^a  

^a UNIVERSITY OF QUEENSLAND   (Australia)

^b ETH ZURICH   (Switzerland)

^c OAK RIDGE NATIONAL LABORATORY   (United States)

^d GM China Science Lab   (China)

Author keywords

A. Magnesium; B. SEM; B. Weight loss

Indexed keywords

3.5% NACL SOLUTIONS; AVERAGE CORROSION RATES; DISSOLUTION MECHANISM; ELECTROCHEMICAL CONTROL; HYDROGEN EVOLUTION; LOCALISED CORROSION; ULTRA HIGH PURITY; WEIGHT LOSS;

DISSOLUTION; HYDROGEN;

CORROSION RATE;

EID: 84880963773     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2013.05.018     Document Type: Article

References (72)

1. Clow B.B. Magnesium industry overview. Adv. Mater. Process. 1996, 150:33-34.
2. Zhao M.-C., Liu M., Song G., Atrens A. Influence of the β-phase morphology on the corrosion of the Mg alloy AZ91. Corros. Sci. 2008, 50:1939-1953.
3. Song G., Atrens A. Understanding magnesium corrosion-a framework for improved alloy performance. Adv. Eng. Mater. 2003, 5:837-858.
4. Song G.L., Atrens A. Corrosion mechanisms of magnesium alloys. Adv. Eng. Mater. 1999, 1:11-33.
5. Chang J.W., Peng L.M., Guo X.W., Atrens A., Fu P.H., Ding W.J., Wang X.S. Comparison of the corrosion behaviour in 5% NaCl solution of Mg alloys NZ30K and AZ91D. J. Appl. Electrochem. 2008, 38:207-214.
6. Jia J.X., Song G., Atrens A. Influence of geometry on galvanic corrosion of AZ91D coupled to steel. Corros. Sci. 2006, 48:2133-2153.
7. Song G., Atrens A. Recent insights into the mechanism of magnesium corrosion and research suggestions. Adv. Eng. Mater. 2007, 9:177-183.
8. Song G.L. Recent progress in corrosion and protection of magnesium alloys. Adv. Eng. Mater. 2005, 7:563-586.
9. Winzer N., Atrens A., Dietzel W., Raja V.S., Song G., Kainer K.U. Characterisation of stress corrosion cracking (SCC) of Mg-Al alloys. Mater. Sci. Eng. A 2008, 488:339-351.
10. Winzer N., Atrens A., Dietzel W., Song G., Kainer K.U. Comparison of the linearly increasing stress test and the constant extension rate test in the evaluation of transgranular stress corrosion cracking of magnesium. Mater. Sci. Eng. A 2008, 472:97-106.
11. Winzer N., Atrens A., Song G.L., Ghali E., Dietzel W., Kainer K.U., Hort N., Blawert C. A critical review of the stress corrosion cracking (SCC) of magnesium alloys. Adv. Eng. Mater. 2005, 7:659-693.
12. Atrens A., Liu M., Zainal Abidin N.I., Song G. Corrosion of magnesium (Mg) alloys and metallurgical influence. Corrosion of Magnesium Alloys 2011, 117-165. Woodhead, Cambridge. G. Song (Ed.).
13. Witte F. The history of biodegradable magnesium implants: a review. Acta Biomater. 2010, 6:1680-1692.
14. Hänzi A.C., Gerber I., Schinhammer M., Löffler J.F., Uggowitzer P.J. On the in vitro and in vivo degradation performance and biological response of new biodegradable Mg-Y-Zn alloys. Acta Biomater. 2010, 6:1824-1833.
15. Witte F., Fischer J., Nellesen J., Crostack H.-A., Kaese V., Pisch A., Beckmann F., Windhagen H. In vitro and in vivo corrosion measurements of magnesium alloys. Biomaterials 2006, 27:1013-1018.
16. Zainal Abidin N.I., Atrens A.D., Martin D., Atrens A. Corrosion of high purity Mg, Mg2Zn0.2Mn, ZE41 and AZ91 in Hank's solution at 37°C. Corros. Sci. 2011, 53:3542-3556.
17. Atrens A., Liu M., Zainal Abidin N.I. Corrosion mechanism applicable to biodegradable magnesium implants. Mater. Sci. Eng. B 2011, 176:1609-1636.
18. Hanawalt J.D., Nelson C.E., Peloubet J.A. Corrosion studies of magnesium and its alloys. Trans. AIME 1942, 147:273-299.
19. J. Hillis, R.W. Murray, Finishing alternatives for high purity magnesium alloys, in: SDCE 14th International Die Casting Congress and Exposition, Toronto 1987, Paper No. G-T87-003.
20. Liu M., Uggowitzer P.J., Nagasekhar A.V., Schmutz P., Easton M., Song G.-L., Atrens A. Calculated phase diagrams and the corrosion of die-cast Mg-Al alloys. Corros. Sci. 2009, 51:602-619.
21. Shi Z., Atrens A. An innovative specimen configuration for the study of Mg corrosion. Corros. Sci. 2011, 53:226-246.
22. Qiao Z., Shi Z., Hort N., Zainal Abidin N.I., Atrens A. Corrosion behaviour of a nominally high purity Mg ingot produced by permanent mould direct chill casting. Corros. Sci. 2012, 61:185-207.
23. Prasad A., Uggowitzer P.J., Shi Z., Atrens A. Production of high purity magnesium alloys by melt purification with Zr. Adv. Eng. Mater. 2012, 14:477-490.
24. H.K. Feichtinger, C. Wegmann, M. Becker, J.F. Loffler, P.J. Uggowitzer, Vacuum Distillation of Magnesium - Process and Apparatus, European Patent Application EP 12000311.6, January 2012.
25. 2. Corros. Sci. 2012, 60:296-308.
26. 2. Adv. Eng. Mater. 2012, 14:324-334.
27. Kirkland N.T., Williams G., Birbilis N. Observations of the galvanostatic dissolution of pure magnesium. Corros. Sci. 2012, 65:5-9.
28. Frankel G.S., Samaniego A., Birbilis N. Evolution of hydrogen at dissolving magnesium surfaces. Corros. Sci. 2013, 70:104-111.
29. 12. Corros. Sci. 2009, 51:1115-1127.
30. Song G., Atrens A., John D.S., Wu X., Nairn J. The anodic dissolution of magnesium in chloride and sulphate solutions. Corros. Sci. 1997, 39:1981-2004.
31. Song G., Atrens A., Stjohn D., Nairn J., Li Y. The electrochemical corrosion of pure magnesium in 1 N NaCl. Corros. Sci. 1997, 39:855-875.
32. Song G., Atrens A., Wu X., Zhang B. Corrosion behaviour of AZ21, AZ501 and AZ91 in sodium chloride. Corros. Sci. 1998, 40:1769-1791.
33. +. Adv. Eng. Mater. 2007, 9:292-297.
34. Song G.L. Corrosion electrochemistry of magnesium (Mg) and its alloys. Corrosion of Magesium Alloys 2011, 3-65. Woodhead, Cambridge. G.L. Song (Ed.).
35. Song G., Song S. A possible biodegradable magnesium implant material. Adv. Eng. Mater. 2007, 9:298-302.
36. Wu H., Melkote S.N., Danyluk S. Mechanical strength of silicon wafers cut by loose abrasive slurry and fixed abrasive diamond wire sawing. Adv. Eng. Mater. 2012, 14:342-348.
37. Perrault G.G. Potentiostatic study of the magnesium electrode in aqueous solution. J. Electroanal. Chem. Interfacial Electrochem. 1970, 27:47-58.
38. Perrault G.G. Mgenesium. Encyclopedia of Electrochemistry of the Elements 1978, 263-319. Marcel Dekker, New York. A.J. Bard (Ed.).
39. Brun C., Pagetti J., Talbot J. Corrosion of Mg in a 3% NaCl solution at room temperature. Mem. Sci. Rev. Metall. 1976, 73:659-668.
40. Fischer A., Köstler H., Schlapbach L. Hydrogen in magnesium alloys and magnesium interfaces: preparation, electronic properties and interdiffusion. J. Less-Common Met. 1991, 172-174:808-815. Part B.
41. Gulbrandsen E. Anodic behaviour of Mg in HCO3-/CO32- buffer solutions. Quasi-steady measurements. Electrochim. Acta 1992, 37:1403-1412.
42. Gulbrandsen E., Tafto J., Olsen A. The passive behaviour of Mg in alkaline fluoride solutions. Electrochemical and electron microscopical investigations. Corros. Sci. 1993, 34:1423-1440.
43. Chen J., Dong J., Wang J., Han E., Ke W. Effect of magnesium hydride on the corrosion behavior of an AZ91 magnesium alloy in sodium chloride solution. Corros. Sci. 2008, 50:3610-3614.
44. 2. Corros. Sci. 2010, 52:562-578.
45. Seyeux A., Liu M., Schmutz P., Song G., Atrens A., Marcus P. ToF-SIMS depth profile of the surface film on pure magnesium formed by immersion in pure water and the identification of magnesium hydride. Corros. Sci. 2009, 51:1883-1886.
46. I. Nakatsugawa, Cathodic Protective Coating on Magnesium or Its Alloys, US Patent No. 6291076, September 2001.
47. Chen J., Wang J., Han E., Dong J., Ke W. States and transport of hydrogen in the corrosion process of an AZ91 magnesium alloy in aqueous solution. Corros. Sci. 2008, 50:1292-1305.
48. 4 solution. Mater. Sci. Eng. A 2008, 488:428-434.
49. Chen J., Wang J., Han E., Ke W. In situ observation of crack initiation and propagation of the charged magnesium alloy under cyclic wet-dry conditions. Corros. Sci. 2008, 50:2338-2341.
50. Winzer N., Atrens A., Dietzel W., Song G., Kainer K.U. Evaluation of the delayed hydride cracking mechanism for transgranular stress corrosion cracking of magnesium alloys. Mater. Sci. Eng. A 2007, 466:18-31.
51. Kirkland N.T., Birbilis N., Staiger M.P. Assessing the corrosion of biodegradable magnesium implants: a critical review of current methodologies and their limitations. Acta Biomater. 2012, 8:925-936.
52. Jones D.A. Principles and Prevention of Corrosion 1996, Prentice Hall, Upper Saddle River, NJ.
53. Shi Z.M., Liu M., Atrens A. Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation. Corros. Sci. 2010, 52:579-588.
54. Topping J. Errors of observation and their treatment 1962, Published for the Institute of Physics by Chapman & Hall, London.
55. Ferrell R.T., Himmelblau D.M. Diffusion coefficients of hydrogen and helium in water. AIChE J. 1967, 13:702-708.
56. Ferrell R.T., Himmelblau D.M. Diffusion coefficients of nitrogen and oxygen in water. J. Chem. Eng. Data 1967, 12:111-115.
57. Crozier T.E., Yamamoto S. Solubility of hydrogen in water, sea water, and sodium chloride solutions. J. Chem. Eng. Data 1974, 19:242-244.
58. Weiss R.F. The solubility of nitrogen, oxygen and argon in water and seawater. Deep Sea Res. 1970, 17:721-735.
59. Gill P.E., Murray W. Algorithms for the solution of the nonlinear least-squares problem. SIAM J. Numer. Anal. 1978, 15:977-992.
60. Levenberg K. A method for the solution of certain problems in least squares. Quart. Appl. Math. 1944, 2:164-168.
61. Marquardt D.W. An algorithm for least-squares estimation of nonlinear parameters. SIAM J. Appl. Math. 1963, 11:431-441.
62. Shrier L.L., Jarman R.A., Burstein G.T. Corrosion 1944, Butterworth, Oxford. third ed.
63. Silverman D.C. Practical corrosion prediction using electrochemical techniques. Uhlig's Corrosion Handbook 2000, 1179-1225. New York, Wiley. 2nd ed. R.W. Revie (Ed.).
64. 2 aqueous solutions. Electrochim. Acta 2006, 51:1820-1830.
65. Baril G., Galicia G., Deslouis C., Pebere N., Tribollet B., Vivier V. An impedance investigation of the mechanism of pure magnesium corrosion in sodium sulfate solutions. J. Electrochem. Soc. 2007, 154:C108-C113.
66. Chang J., Guo X., He S., Fu P., Peng L., Ding W. Investigation of the corrosion for Mg-xGd-3Y-0.4Zr (x=6, 8, 10, 12wt%) alloys in a peak-aged condition. Corros. Sci. 2008, 50:166-177.
67. Chang J.-W., Fu P.-H., Guo X.-W., Peng L.-M., Ding W.-J. The effects of heat treatment and zirconium on the corrosion behaviour of Mg-3Nd-0.2Zn-0.4Zr (wt.%) alloy. Corros. Sci. 2007, 49:2612-2627.
68. Jin S., Amira S., Ghali E. Electrochemical impedance spectroscopy evaluation of the corrosion behavior of die cast and Thixocast AXJ530 magnesium alloy in chloride solution. Adv. Eng. Mater. 2007, 9:75-83.
69. Pinto R., Ferreira M.G.S., Carmezim M.J., Montemor M.F. Passive behavior of magnesium alloys (Mg-Zr) containing rare-earth elements in alkaline media. Electrochim. Acta 2010, 55:2482-2489.
70. Wu G., Fan Y., Atrens A., Zhai C., Ding W. Electrochemical behavior of magnesium alloys AZ91D, AZCe2, and AZLa1 in chloride and sulfate solutions. J. Appl. Electrochem. 2008, 38:251-257.
71. Song G.L., Shi Z.M. Anodization and corrosion of magnesium (Mg) alloys. Corrosion of Magesium Alloys 2011, 565-609. Woodhead, Cambridge. G.L. Song (Ed.).
72. Ghali E. Corrosion Resistance of Aluminum and Magnesium Alloys: Understanding, Performance, and Testing 2010, Wiley, US.