Design energy input spectra for high seismicity regions based on Turkish registers

Bulletin of Earthquake Engineering

Volumn 11, Issue 4, 2013, Pages 885-912

  Lopez Almansa F ^a   Yazgan, A U ^a   Benavent Climent, A ^b  

^a UNIVERSITAT POLITÈCNICA DE CATALUNYA   (Spain)

^b UNIVERSITY OF GRANADA   (Spain)

Author keywords

Ductility; Energy spectra; Hysteretic energy; Input energy; Nonlinear time history analysis; Turkey

Indexed keywords

ENERGY SPECTRA; HYSTERETIC ENERGY; INPUT ENERGY; NONLINEAR TIME HISTORY ANALYSIS; TURKEY;

DUCTILITY; EARTHQUAKES; HYSTERESIS; SPECTROSCOPY;

DESIGN;

ACCELERATION; GROUND MOTION; HYSTERESIS; MAGNITUDE; NONLINEARITY; PARAMETERIZATION; SEISMIC DESIGN; SEISMICITY; SENSITIVITY ANALYSIS; SOIL TYPE;

TURKEY;

EID: 84880634251     PISSN: 1570761X     EISSN: 15731456     Source Type: Journal    
DOI: 10.1007/s10518-012-9415-2     Document Type: Article

References (48)

1. Adang S (2007) Earthquake-resistant structural design through energy demand and capacity. Eng Struct Dyn 36: 2099-2117. doi: 10. 1002/eqe. 718.
2. Akiyama H (1985) Earthquake-resistant limit-state design for buildings. University of Tokyo Press, Tokyo.
3. Akiyama H (1999) Earthquake-resistant design method for buildings based on energy balance. Gihodo Shuppan: 25-26.
4. Akkar S, Çagnan Z, Yenier E, Erdogan Ö, Sandi{dotless}kkaya MA, Gülkan P (2010) The recently compiled Turkish strong motion database: preliminary investigation for seismological parameters. J Seismol 14(3): 457-479.
5. Amiri GG, Darzi GA, Amiri JV (2008) Design elastic input energy spectra based on Iranian earthquakes. Can J Civ Eng 35: 635-646.
6. Arias A (1970) A measure of earthquake intensity. Seismic design for nuclear power plants. In: Hansen R (ed) MIT Press, Cambridge, pp 438-483.
7. Baker JW (2007) Quantitative classification of near-fault ground motions using wavelet analysis. Bull Seismol Soc Am 97(5): 1486-1501.
8. Benavent-Climent A (2007) An energy-based damage model for seismic response of steel structures. Earthq Eng Struct Dyn 36: 1049-1064.
9. Benavent-Climent A, Pujades LG, López-Almansa F (2002) Design energy input spectra for moderate-seismicity regions. Earthq Eng Struct Dyn 31: 1151-1172.
10. Benavent-Climent A, López-Almansa F, Bravo DA (2010) Design energy input spectra for moderate-to-high seismicity regions based on Colombian earthquakes. Soil Dyn Earthq Eng 30(11): 1129-1148.
11. Berg GV, Thomaides SS (1960) Energy consumption by structures in strong-motion earthquakes. Proc Second World Conf Earthq Eng 2: 681-697.
12. Bertero RD, Bertero VV, Teran-Gilmore A (1996) Performance-based earthquake-resistant design based on comprehensive design philosophy and energy concepts. In: Proceedings of the eleventh world conference on earthquake engineering, Disc 2, Paper No. 611.
13. Bruneau M, Wang N (1996) Normalized energy-based methods to predict the seismic ductile response of SDOF structures. Eng Struct 18: 13-28.
14. BSL. The building standard law of Japan. (2009). The building center of Japan, Tokyo. (English version on CD available at http://118. 82. 115. 195/en/services/publication. html).
15. Chou CC, Uang CM (2000) Establishing absorbed energy spectra -an attenuation approach-. Earthq Eng Struct Dyn 29: 1441-1455.
16. Chou CC, Uang CM (2003) A procedure for evaluating seismic energy demand of framed structures. Earthq Eng Struct Dyn 32: 229-244.
17. Cornell CA (1968) Engineering seismic risk analysis. Bull Seismol Soc Am 58: 1583-1606.
18. Cosenza E, Manfredi G, Polese M (2009) A simplified method to include cumulative damage in the seismic response of SDOF systems. J Eng Mech ASCE 135(10): 1081-1088.
19. Decanini LD, Mollaioli F (1998) Formulation of elastic earthquake input energy spectra. Earthq Eng Struct Dyn 27: 1503-1522.
20. Decanini LD, Mollaioli F (2001) An energy-based methodology for the seismic assessment of seismic demand. Soil Dyn Earthq Eng 21: 113-137.
21. EN 1998. (2004) Eurocode 8. Design of structures for earthquake resistance, European Committee for Standarization.
22. Erdogan Ö (2008) Main seismological features of recently compiled Turkish strong motion database. MSc Thesis. Middle East Technical University, Ankara, Turkey.
23. Esteva L (1970) Seismic risk and seismic design decision, seismic design for nuclear power plants. MIT Press, Cambridge, pp 142-182.
24. Fajfar P, Vidic T (1994) Consistent inelastic design spectra: hysteretic and input energy. Earthq Eng Struct Dyn 23: 523-537.
25. Hall WL, Nau JM, Zahrah TF (1984) Scaling of response spectra and energy dissipation in SDOF systems. In: Proceedings of the eighth world conference on earthquake engineering, vol 4, pp 7-14.
26. Housner GW (1956) Limit design of structures to resist earthquakes. Proc First World Conf Earthq Eng 5: 1-12.
27. Housner GW, Jennings PC (1977) The capacity of extreme earthquake motions to damage structures, structural and geotechnical mechanics, a volume honoring Nathan M. Newmark, pp 102-116.
28. Iervolino I, Manfredi G, Cosenza E (2006) Ground motion duration effects on nonlinear seismic response. Earthq Eng Struct Dyn 35: 21-38.
29. Jiao Y, Yamada S, Kishiki S, Shimada Y (2011) Evaluation of plastic energy dissipation capacity of steel beams suffering ductile fracture under various loading histories. Earthq Eng Struct Dyn 40: 1553-1570. doi: 10. 1002/eqe. 1103.
30. Kato B, Akiyama H (1975) Energy input and damages in structures subjected to severe earthquakes. J Struct Constr Eng Trans AIJ 235: 9-18 (in Japanese).
31. Kempton JJ, Stewart JP (2006) Prediction equations for significant duration of earthquake ground motions considering site and near-source effects. Earthq Spectra 22(4): 985-1013.
32. Kuwamura H, Galambos TV (1989) Earthquake load for structural reliability. J Struct Eng ASCE 115(6): 1446-1462.
33. Kuwamura H, Kirino Y, Akiyama H (1994) Prediction of earthquake energy input from smoothed fourier amplitude spectrum. Earthq Eng Struct Dyn 23: 1125-1137.
34. Lawson RS, Krawinkler H (1995) Cumulative damage potential of seismic ground motion. In: Proceedings of the 10th European conference on, earthquake engineering 1079-86.
35. Leelataviwat S, Saewon W, Goel SC (2009) Application of energy balance concept in seismic evaluation of structures. J Struct Eng 135(2): 113-121.
36. Manfredi G (1995) Stime energetiche e potenziale di danno sismico, VII Convegno Nazionale: L'Ingenieria sismica in Italia. Siena. 1: 43-52.
37. Manfredi G (2001) Evaluation of seismic energy demand. Earthq Eng Struct Dyn 30: 485-499.
38. Priestley MJN, Calvi GM, Kowalsky MJ (2007) Displacement-based seismic design of structures, IUSS Press.
39. Teran-Gilmore A (1996) Performance-based earthquake-resistant design of framed buildings using energy concepts, PhD Thesis, Department of Civil Engineering, University of California at Berkeley.
40. Triffunac MD, Brady AG (1975) A study on the duration of strong earthquake ground motion. Bull Seism Soc Am 65(3): 581-626.
41. TSC 2007 (2007) Ministry of public works and settlement of Turkey, Turkish Seismic Code. Specification for Buildings to be constructed in Seismic Zones.
42. Tselentis GA, Danciu L, Sokos E (2010) Probabilistic seismic hazard assessment in Greece. Part II: acceleration response spectra and elastic input energy spectra. Nat Hazards Earth Sci Syst 10: 1-15.
43. Uang CM, Bertero VV (1988) Use of energy as a design criterion in earthquake-resistant design. Report No. UBC-EERC-88-18. Berkeley: Earthquake Engineering Research Center, University of California.
44. Uang CM, Bertero VV (1990) Evaluation of seismic energy in structures. Earthq Eng Struct Dyn 19(1): 77-90.
45. UBC (1997) Uniform building code. International council of building officials.
46. Yazgan AU (2012) Proposal of energy spectra for earthquake resistant design based on Turkish registers. Technical University of Catalonia, Doctoral Dissertation.
47. Yei L, Otani S (1999) Maximum seismic displacement of inelastic systems based on energy concept. Earthq Eng Struct Dyn 28: 1483-1499.
48. Zahrah TF, Hall WJ (1984) Earthquake energy absorption in SDOF systems. J Struct Eng 110: 1757-1772.