Characterization of combustion aerosol produced by a mini-CAST and treated in a catalytic stripper

Aerosol Science and Technology

Volumn 47, Issue 8, 2013, Pages 927-936

  Mamakos, Athanasios ^a   Khalek, Imad ^a   Giannelli, Robert ^b   Spears, Matthew ^b  

^a SOUTHWEST RESEARCH INSTITUTE   (United States)

^b U S ENVIRONMENTAL PROTECTION AGENCY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMBUSTION AEROSOLS; DIFFERENT OPERATING CONDITIONS; INSTRUMENT CALIBRATIONS; OPERATING CONDITION; OPTICAL PARTICLE COUNTERS; PHOTOACOUSTIC SENSORS; SEMI-VOLATILE MATERIALS; THERMO-OPTICAL ANALYSIS;

CALIBRATION; COMBUSTION; INTERNAL COMBUSTION ENGINES; QUARTZ;

AEROSOLS;

BUTANOL; CARBON;

AEROSOL; ARTICLE; CALIBRATION; CARBON PARTITIONING; CATALYSIS; COMBUSTION; CONTROLLED STUDY; DENSITY; FILTER; LIGHT ABSORPTION; PARTICLE SIZE; PARTICULATE MATTER; PHOTOACOUSTICS; PRIORITY JOURNAL;

APSEUDES;

EID: 84879122068     PISSN: 02786826     EISSN: 15217388     Source Type: Journal    
DOI: 10.1080/02786826.2013.802762     Document Type: Article

References (47)

1. Berg, W. (2003). Legislation for the Reduction of Exhaust Gas Emissions, in Handbook of Environment Chemistry, 3(Part T): 175-253.
2. Birch, M. E., and Cary, R. A. (1996). Elemental Carbon-Based Method for Monitoring Occupational Exposures to Particulate Diesel Exhaust. Aerosol Sci. Technol., 25: 221-241.
3. Biskos, G., Mastorakos, E., and Collings, N. (2004). Monte Carlo Simulation of Unipolar Diffusion Charging for Spherical and Non-Spherical Particles. J. Aerosol Sci., 35: 707-730.
4. Bond, T. C., and Bergstrom, R. W. (2006). Light Absorption by Carbonaceous Particles: An Investigative Review. Aerosol Sci. Technol., 40: 27-67.
5. Boucher, T. L., Khalek, I. A., Laroo, C. A., and Bischnu, D. K. (2012). Determination of the PEMS Measurement Allowance for PM Emissions Regulated Under the Heavy-Duty Diesel Engine In-Use Testing Program. SAE Int. J. Eng., 5: 1371-1386.
6. Chow, J.C., Watson, J. G., Crow, D., Lowenthal, D. H., andMerrifield, T. (2001). Comparison of IMPROVE and NIOSH Carbon Measurements. Aerosol Sci. Technol., 34: 23-34.
7. Cossette, G., Speilvogel, J., Carli, S., Usarek, S., Brandt, L., Keck, L., et al. (2010). Comparison of two Condensation Particle Counters for Automotive Applications using a Combustion Soot Generator. 29th AAAR Conference, 25-29 October 2010, Portland, Oregon, USA.
8. EC (2007). Commission Regulation 715/2007.
9. EC (2009). Commission Regulation 595/2009.
10. EC (2012). Commission Regulation 459/2012.
11. Fiedler, M., and Hess, P. (1989). Laser Excitation of Acoustic Modes in Cylindrical and Spherical Resonators: Theory and Applications. In Photoacoustic, Photothermal and Photochemical Processes in Gases, Topics in Current Physics. 46: 85-123.
12. Ghazi, R., Tjong, H., Soewono, A., Rogak, S. R., and Olfert, J. S. (2013). Mass, Mobility, Volatility, and Morphology of Soot Particles Generated by a McKenna and Inverted Burner. Aerosol Sci. Technol., 47: 395-405.
13. Giechaskiel, B., and Bergmann, A. (2011).Validation of 14Used, Re-Calibrated and New TSI 3790 Condensation Particle Counters According to the UNECE Regulation 83. J. Aerosol Sci., 42: 195-203.
14. Giechaskiel, B., Mamakos, A., Andersson, J., Dilara, P., Martini, G., Schindler, W. et al. (2012). Measurement of Automotive Nonvolatile Particle Number Emissions within the European Legislative Framework: A Review. Aerosol Sci. Technol., 46: 719-749.
15. Giechaskiel, B., Wang, W., Gilliland, D., and Drossinos, Y. (2011). The Effect of Particle Chemical Composition on the Activation Probability in n-Butanol Condensation Particle Counter. J. Aerosol Sci., 42: 20-37.
16. Giechaskiel, B., Wang, W., Horn, G. G., Spielvogel, J., Gerhart, C., Southgate, J., et al. (2009). Calibration of Condensation Particle Counters for Legislated Vehicle Number Emission Measurements. Aerosol Sci. Technol., 43: 1164-1173.
17. Gysel M., Laborde, M., Mensah, A. A., Corbin, J. C., Keller, A., Kim, J., et al. (2012). Technical Note: The Single Particle Soot Photometer Fails to Reliably Detect PALAS Soot Nanoparticles. Atmos. Meas. Tech., 5: 3099-3107.
18. Jing, L. (1999). Standard Combustion Aerosol Generator for Calibration Purposes. 3rd ETH Conference on Combustion Generated Nanoparticles. Zurich, 9-10 August, 1999.
19. Kelly, W. P., andMcMurry, P.H. (1992).Measurement of Particle Density by Inertial Classification of Differential Mobility Analyzer-Generated Monodisperse Aerosol. Aerosol Sci. Technol., 17: 199-212.
20. Khalek, I. A. (2007). Sampling System for Solid and Volatile Exhaust Particle Size, Number, and Mass Emissions. SAE Int. J. Fuels Lubr., 116: 122-133.
21. Khalek, I. A., Bougher, T., and Jetter, J. J. (2010). Particle Emissions from a 2009 Gasoline Direct Injection Engine Using Different Commercially Available Fuels. SAE Int. J. Fuels Lubr., 3(2): 623-637.
22. Konstandopoulos, A. G., Daskalos, E., and Vlachos, N. (2011). The Microstructure of Soot Aggregates Produced by the Combustion Aerosol Standard (CAST) Generator. 15th ETH-Conference on Combustion Generated Nanoparticles, June 26-29, Zurich, Switzerland.
23. Mamakos, A., Bonnel, P., Perujo, A., and Carriero, M. (2012). Assessment of Portable Emission Measurement Systems (PEMS) for Heavy-Duty Diesel Engines with Respect to Particulate Matter. J. Aerosol Sci., 57: 54-70.
24. Mamakos, A., Carriero, M., Bonnel, P., Demircioglu, H., Douglas, K., Alessandrini, S., et al. (2011). EU-PEMS PM Evaluation Program - Second Report - Study on Post DPF PM/PN Emissions. JRC Scientific Technical Report EUR 24793 EN.
25. Mamakos, A., Giechaskiel, B., and Drossinos, Y. (2013). Experimental and Theoretical Investigations of the Effect of the Calibration Aerosol Material on the Counting Efficiencies of TSI 3790 Condensation Particle Counters. Aerosol Sci. Technol., 47: 11-21.
26. Maricq, M.M., andXu, N. (2004). The Effective Density and Fractal Dimension of Soot Particles from Premixed Flames and Motor Vehicle Exhaust. J. Aerosol Sci., 35: 1251-1274.
27. Marjamaki, M., Lemmetty, M., and Keskinen, J. (2005). ELPI Response and Data Reduction I: Response Functions. Aerosol Sci. Technol., 39: 575-582.
28. Mathis, U., Kaegi, R., Mohr, M., and Zenobi, R. (2004). TEM Analysis of Volatile Nanoparticles from Particle Trap Equipped Diesel and Direct-Injection Spark-Ignition Vehicles. Atmos. Environ., 38: 4347-4355.
29. Mathis, U., Mohr, M., Kaegi, R., Bertola, A., and Boulouchos, K. (2005). Influence of Diesel Engine Combustion Parameters on Primary Soot Particle Diameter. Environ. Sci. Technol., 39: 1887-1892.
30. NIOSH (1999). Method 5040 Issue 3: Elemental Carbon (Diesel Exhaust). In NIOSH Manual of Analytical Methods. National institute of Occupational Safety and health, Cincinnati, OH.
31. Olfert, J. S., Symonds, J. P. R., and Collings, N. (2007). The Effective Density and Fractal Dimension of Particles Emitted from a Light- DutyDieselVehicle with a Diesel Oxidation Catalyst. J. Aerosol Sci., 38: 69-82.
32. Park, K., Cao, F., Kittelson, D. B., and McMurry, P. H. (2003). Relationship between Particle Mass and Mobility for Diesel Exhaust Particles. Environ. Sci. Technol., 37: 577-583.
33. Pope, C.A. III, Burnett, R. T., Thun, M. J., Calle, E. E., Krewski, D., Ito, K., et al. (2002). Lung Cancer, Cardiopulmonary Mortality, and Long-term Exposure to Fine Particulate Air Pollution. J. Am. Med. Assoc., 287(9): 1132-41.
34. Rissler, J., Messing, M. E., Malik, A. I., Nilsson, P. T., Nordin, E. Z., Bohgard, M., et al. (2013). Effective Density Characterization of Soot Agglomerates from Various Sources and Comparison to Aggregation Theory. Aerosol Sci. Technol., 47: 792-805.
35. Ristimaki, J., Virtanen, A., Marjamaki, M., Rostedt, A., and Keskinen, J. (2002). On-Line Measurement of Size Distribution and Effective Density of Submicron Aerosol Particles. J. Aerosol Sci., 33: 1541-1557.
36. Saathoff, H., Blatt. N., Gimmler, M., Linke, C., and Schurath, U. (2004). Thermographic Characterisation ofDifferent Soot Types. 8thETHConference on Combustion Generated Particles, 14-16 September, 2004, Zurich, Switzerland.
37. SAE Standard AIR589 (2012).Nonvolatile Exhaust Particle Measurement Techniques. E-31 Aircraft Exhaust Emissions Committee. Version 2012-03-07.
38. Schindler, W., Haisch, C., Beck, H., A., Niessner, R., Jacob, E., and Rothe, D. (2004). A Photoacoustic Sensor System for Time Resolved Quantification of Diesel Soot Emissions. SAE Technical Paper 2004-01-0968.
39. Seong, H., Lee, K., Mamakos, A., Khalek, I. A., Giannelli, R., and Spears, M. (2013). Morphology and Nanostructures of Particles from an Engine Simulating Particle Generator. 23rd CRC RealWorld EmissionsWorkshop, 7-10 April, San Diego, USA.
40. Sorensen, C.M. (2011). The Mobility of Fractal Aggregates: A Review. Aerosol Sci. Technol., 45: 765-779.
41. Tzamkiozis, T., Ntziachristos, L., Mamakos, A., Fontaras, G., and Samaras, Z. (2011). Aerodynamic and Mobility Size Distribution Measurements to Reveal Biodiesel Effects on Diesel Exhaust Aerosol. Aerosol Sci. Technol., 45: 587-595. UNECE Regulation 83.
42. UNEP/WMO (2011). Integrated Assessment of Black Carbon and Tropospheric Ozone. United Nations Environment Programme andWorld Meteorological Organization. Summary for Decision Makers.
43. USEPA (2008). Code Of Federal Regulations 40, part 1065.
44. USEPA (2010). Notice of Alternate System Approval. CISD-10-22. October 19, 2010.
45. VAMV (2006). Verordnung des EJPD über Abgasmessgerate für Verbrennungsmotoren (VAMV) vom 19 M?arz 2006.
46. Wang, X., Caldow, R., Sem, G. J., Hama, N., and Sakurai, H. (2010). Evaluation of a Condensation Particle Counter for Vehicle Emission Measurement: Experimental Procedure and Effects of Calibration Aerosol Material. J. Aerosol Sci., 41: 306-318.
47. Weijer, E. P., Schaap, M., Nguyen, L., Matthijsen, J., Denier van der Gon, H. A. C., et al. (2011).Anthropogenic and NaturalConstituents in Particulate Matter in the Netherlands. Atmos. Chem. Phys., 11: 2281-2294.