Current progress and new developments in enhanced heat and mass transfer

Journal of Enhanced Heat Transfer

Volumn 20, Issue 1, 2013, Pages 1-15

  Bergles, Arthur E ^a   Manglik, Raj M ^b  

^a UNIVERSITY OF MARYLAND   (United States)

^b University of Cincinnati   (United States)

Author keywords

Condensation; Flow Boiling; Fouling; Single Phase Convection; Survey

Indexed keywords

CONDENSATION; FOULING; HEAT TRANSFER; SURVEYING;

APPROPRIATE DESIGNS; FLOW BOILING; HEAT AND MASS TRANSFER; SINGLE-PHASE CONVECTIONS; THERMAL SCIENCE;

MASS TRANSFER;

EID: 84879035105     PISSN: 10655131     EISSN: None     Source Type: Journal    
DOI: 10.1615/JEnhHeatTransf.2013006989     Document Type: Article

References (70)

1. Alam, U., Abdalrahman, K., and Specht, E., Experimental Investigation of influence of dissolved salts and surfactant on heat transfer in atomized spray quenching of metal, in Proc. of the Intl. Heat Transf. Conf., Paper IHTC14-22873, Washington, DC, ASME, New York, NY, August 8-13, 2010.
2. Al-Janabi, A., Malayeri, M. R., and Muller-Steinhagen, H., Minimization of CaSO4 deposition through surface modification, Heat Transf. Eng., vol. 32, pp. 291-299, 2011.
3. Athavale, A. D., Manglik, R. M., and Jog, M. A., An experimental investigation of nucleate pool boiling in aqueous solutions of a polymer, AIChE J., vol. 58, no. 3, pp. 668-677, 2012.
4. Bartoli, C. and Baffigi, F., Heat transfer enhancement from a circular cylinder to distilled water by ultrasonic waves at different subcooling degrees, in Proc. of the Intl. Heat Transf. Conf., Paper IHTC14-227732010, Washington, DC, ASME, New York, August 8-13, 2010.
5. Bergles, A. E., Nirmalan, V., Junkhan, G. H., and Webb, R. L., Bibliography on Augmentation of Convective Heat and Mass Transfer-II, Iowa State University, Ames, IA, 1983.
6. Bergles, A. E., Jensen, M. K., Somerscales, E. F. C., and Manglik, R. M., Literature Review of Heat Transfer Enhancement Technology for Heat Exchangers in Gas-Fired Applications, Gas Research Institute, Chicago, IL, 1991.
7. Bergles, A. E., Techniques to enhance heat transfer, in Handbook of Heat Transfer, W. M. Rohsenow, Hartnett, J. P., and Cho, Y. I., Eds., McGraw-Hill, New York, pp. 11.1-11.76, 1998.
8. Bergles, A. E., The implications and challenges of enhanced heat transfer in the chemical process industries, Chem. Eng. Res. Des., vol. 79, no. 4, pp. 437-444, 2001.
9. Bergles, A. E., Recent developments in enhanced heat transfer, Heat Mass Transf., vol. 47, no. 8, pp. 1001-1008, 2011.
10. Bishara, F., Jog, M. A., and Manglik, R. M., Computational simulation of swirl enhanced flow and heat transfer in a twisted oval tube, J. Heat Transf., vol. 131, no. 8, p. 8080902-1, 2009.
11. Bishara, F., Jog, M. A., and Manglik, R. M., Heat transfer and pressure drop of periodically fully developed swirling laminar flows in twisted tubes with elliptical cross sections, in 2009 ASME-IMECE, ASME, New York, NY, November 13-19, 2009.
12. Burgess, N. K. and Ligrani, P. M., Effects of dimple depth on channel Nusselt numbers and friction factors, J. Heat Transf., vol. 127, pp. 839-847, 2005.
13. Chen, H.-B., Zhou, Y., Yin, J., Yan, J., Ma, Y., Wang, L., Cao, Y., Wang, J., and Pei, J., Single organic microtwist with tunable pitch, Langmuir, vol. 25, no. 10, pp. 5459-5462, 2009.
14. Chien, L.-H. and Hwang, H.-L., An experimental study of boiling heat transfer enhancement of mesh-on-fin tubes, J. Enhanced Heat Transf., vol. 19, no. 1, pp. 75-86, 2012.
15. Drelich, J. and Chibowski, E., Superhydrophilic and superwetting surfaces: Definition and mechanisms of control, Langmuir, vol. 26, no. 24, pp. 18621-18623, 2010.
16. Eronin, A., Malyshenko, S., and Zhuraviev, A., The influence of external electric field on heat transfer at boiling on nonuni-form surfaces, in Proc. of the Intl. Heat Transf. Conf., Paper IHTC14-226642010, Washington, DC, ASME, New York, August 8-13, 2010.
17. Fang, R., Jaing, W., Khan, J., and Dougal, R., Experimental heat transfer enhancement in single-phase liquid microchannel cooling with cross flow synthetic jet, in Proc. of the Intl. Heat Transf. Conf., Paper IHTC14-23020, Washington, DC, ASME, New York, August 8-13, 2010.
18. Garrity, P. T., Klausner, J. F., and Mei, R., Performance of aluminum and carbon foams for air side heat transfer augmentation, J. Heat Transf., vol. 132, no. 12, pp. 121901(1-9), 2010.
19. Hetsroni, G., Gurevich, M., Mosyak, A., Pogrebnyak, E., Rozenblit, R., and Segal, Z., The effect of surfactants on boiling heat transfer, J. Enhanced Heat Transf., vol. 13, no. 2, pp. 185-195, 2006. (Pubitemid 44520257)
20. Hu, W.-L., Zhang, Y.-H., and Wang, L.-B., Numerical simulation on turbulent fluid flow and heat transfer enhancement of a tube bank fin heat exchanger with mounted vortex generators on the fins, J. Enhanced Heat Transf., vol. 18, no. 5, pp. 361-374, 2011.
21. Itaya, Y., Kobayashi, N., and Nakamiya, T., Okara drying by Pneumatically Swirling Two-Phase Flow in Entrained Bed Riser with Enlarged Zone, Drying Technol., vol. 28, no. 8, pp. 972-980, 2010.
22. Javed, K. H., Mahmud, T., and Purba, E., The CO2 capture performance of a high-intensity vortex spray scrubber, Chem. Eng. J., vol. 162, no. 2, pp. 448-456, 2010.
23. Jones, R. J., Pate, D. T., Thingarajan, N., and Bhavnani, S. H., Heat transfer and pressure drop characteristics in dielectric flow in surface-augmented microchannels, J. Enhanced Heat Transf., vol. 16, no. 3, pp. 225-236, 2009.
24. Joule, J. P., On the surface-condensation of steam, Philos. Trans. R. Soc., London, vol. 151, pp. 133-160, 1861.
25. Kananeh, A. B., Rausch, M. H., Leipertz, A., and Froba, A. P., Dropwise condensation heat transfer on plasmaion-implanted small horizontal tube bundles, Heat Transf. Eng., vol. 31, pp. 821-828, 2010.
26. Kanizawa, F. T., Hernandes, R. S., de Moraes, A. A. U., and Ribatski, G., A new correlation for single and two-phase flow and pressure drop in round tubes with twisted-tape inserts, J. Braz. Soc. Mech. Sci. Eng., vol. XXXIII, pp. 243-250, 2011.
27. Kanizawa, F. T. and Ribatski, G., Two-phase flow patterns and pressure drop inside horizontal tubes containing twisted-tape inserts, Int. J. Multiphase Flow, vol. 47, no. 1, pp. 50-65, 2012.
28. Kedzierski, M. A., Effect of Al2O3 nanolubricant on R134a pool boiling heat transfer, Int. J. Refrig., vol. 34, no. 2, pp. 498-508, 2011.
29. Kim, S. J., McKrell, T., Buongiorno, J., and Hu, L.-W., Experimental study of flow critical heat flux in alumina-water, zincoxide-water, and diamond-water nanofluids, J. Heat Transf., vol. 131, no. 4, pp. 043204(1-7), 2009.
30. Kuo, C. J. and Peles, Y., Flow boiling of coolant (HFE-7000) inside structured and plain wall microchannels, J. Heat Transf., vol. 131, no. 12, p. 121011, 2009.
31. Kim, S. S., Weibel, J. A., Fisher, T. S., and Garimella, S. V., Thermal performance of carbon nanotube enhanced vapor chamber wicks, in Proc. of the Intl. Heat Transfer Conf., Paper IHTC14-22929, Washington, DC, ASME, New York, August 8-13, 2010.
32. Kim, B. S., Shin, S., Shin, S. J., Kim, K. M., and Cho, H. H., Control of superhydrophilicity/superhydrophobicity using silicon nanowires via electroless etching method and fluorine carbon coatings, Langmuir, vol. 27, pp. 10148-10156, 2011.
33. Lee, Y. O., Ahn, J., Kim, J., and Lee, J. S., Effect of dimple arrangements on the turbulent heat transfer in a dimpled channel, J. Enhanced Heat Transf., vol. 19, no. 4, pp. 359-367, 2012.
34. Lindstedt, M. and Karvinen, R., Optimization of isothermal plate fin arrays with laminar forced convection, J. Enhanced Heat Transf., vol. 19, no. 6, pp. 535-547, 2012.
35. Manglik, R. M. and Bergles, A. E., Swirl flow heat transfer and pressure drop with twisted-tape inserts, in Advances in Heat Transfer, J. P. Hartnett, Irvine, T. F., Cho, Y. I., and Greene, G. A., Editors, Academic, New York, pp. 183-266, 2002.
36. Manglik, R. M., Heat transfer enhancement, in Heat Transfer Handbook, A. Bejan and Kraus, A. D., Editors,Wiley, Hoboken, NJ, Chap. 14, 2003.
37. Manglik, R. M. and Bergles, A. E., Enhanced heat and mass transfer in the new millennium: A review of the 2001 literature, J. Enhanced Heat Transf., vol. 11, no. 2, pp. 87-118, 2004. (Pubitemid 41764653)
38. Manglik, R. M., On the advancements in boiling, two-phase flow heat transfer, and interfacial phenomena, J. Enhanced Heat Transf., vol. 128, no. 12, pp. 1237-1242, 2006. (Pubitemid 46165174)
39. Manglik, R. M. and Jog, M. A., Molecular-to-large-scale heat transfer with multiphase interfaces: Current status and new directions, J. Heat Transf., vol. 131, no. 12, pp. 121001(1-11), 2009.
40. Manglik, R. M., Huzayyin, O. A., and Jog, M. A., Fin effects in flow channels of plate-fin compact heat exchanger cores, J. Thermal Sci. Eng. Appl., vol. 3, no. 6, pp. 041004(1-9), 2011.
41. Manglik, R. M., Patel, P., and Jog, M. A., Swirl-enhanced forced convection through axially twisted rectangular ducts-Part 2, Heat transfer, J. Enhanced Heat Transf., vol. 19, no. 5, pp. 437-450, 2012.
42. Manglik, R. M. and Bergles, A. E., Characterization of Twisted-Tape-Induced helical swirl flows for enhancement of forced convective heat transfer in single-phase and two-phase flows, J. Thermal Sci. Eng. Appl., vol. 5, no. 2, p. 021010, 2013.
43. Mustafa Akbari, M., Murata, A., Mochizuki, S., Saito, H., and Iwamoto, K., Effects of vortex generator arrangements on heat transfer enhancement over a two-row fin-and-tube heat exchanger, J. Enhanced Heat Transf., vol. 16, no. 4, pp. 315-329, 2009.
44. Neshumayev, D. and Tiikma, T., Review of compound passive heat transfer enhancement techniques, in Proc. of the Baltic Heat Transf. Conf., Saint Petersburg State Polytechnical University, Russia, vol. 1, pp. 410-424, September 19-21, 2007.
45. Neshumayev, D. and Tiikma, T., Radiation heat transfer of turbulator inserts in gas-heated channels, in Proc. of the Baltic Heat Transf. Conf., Saint Petersburg State Polytechnical University, Russia, vol. 2, pp. 525-531, September 19-21, 2007.
46. Nishida, S., Murata, A., Saito, H., and Iwamoto, K., Compensation of three-dimensional heat conduction inside wall in heat transfer measurement of dimpled surface by using transient technique, J. Enhanced Heat Transf., vol. 19, no. 4, pp. 331-341, 2012.
47. Park, H. and Kim, S., Thermal performance improvement of a heat sink with piezoelectric vibrating fins, in Proc. of the Intl. Heat Transf. Conf., Paper IHTC14-225522010, Washington, DC, ASME, New York, August 8-13, 2010.
48. Patel, P., Manglik, R. M., and Jog, M. A., Swirl-enhanced forced convection through axially twisted rectangular ducts-Part 1, Fluid flow, J. Enhanced Heat Transf., vol. 19, no. 5, pp. 423-436, 2012.
49. Razani, A., Paquette, J. W., Montoya, B., and Kim, K. J., A thermal model for calculation of heat transfer enhancement by porous metal inserts, J. Enhanced Heat Transf., vol. 8, no. 6, pp. 411-420, 2001. (Pubitemid 34638699)
50. Rioboo, R., Marengo, M., Dall'Olio, S., Voue, M., and De Coninck, J., An innovative method to control the incipient flow boiling through grafted surfaces with chemical patterns, Langmuir, vol. 25, no. 11, pp. 6005-6009, 2009.
51. Sachdeva, G., Kasana, K. S., and Vasudevan, R., Heat transfer enhancement by using a rectangular wing vortex generator on the triangular shaped fins of a plate-fin heat exchanger, Heat Transfer-Asian Res., vol. 39, no. 3, pp. 151-165, 2010.
52. Schneider, B., Kosar, A., Kuo, C.-J., Mishra, C., Cole, G. S., Scaringe, R. P., and Peles, Y., Cavitation enhanced heat transfer in microchannels, J. Heat Transf., vol. 128, no. 12, pp. 1293-1301, 2006. (Pubitemid 46165180)
53. Solano, J. P., Garcia, A., Vicente, P. G., and Viedma, A., Performance evaluation of a zero-fouling reciprocating scrapedsurface heat exchanger, Heat Transfer Eng., vol. 32, nos. (3-4), pp. 331-338, 2011.
54. Spori, D. M., Drobek, T., Zurcher, S., Ochsner, M., Sprecher, C., Muhlebach, A., and Spencer, N. D., Beyond the lotus effect: Roughness influence on wetting over a wide surface-energy range, Langmuir, vol. 24, no. 10, pp. 5411-5417, 2008.
55. Sykes, D., Cole, G. S., Staples, D. A., Kosar, A., and Bergles, A. E., Critical heat flux in cooling channels for flowfield probes, in Proc. of the Intl. Heat Transf. Conf., Paper IHTC14-23276, ASME, New York, August 8-13, 2010.
56. Takata, Y., Hidaka, S., Masuda, M., and Ito, T., Pool boiling on a superhydrophilic surface, Int. J. Energy Res., vol. 27, no. 2, pp. 111-119, 2003. (Pubitemid 36280888)
57. Takata, Y., Sumitomo, H., and Kohno, M., Wettability improvement by plasma irradiation and its applications to phasechange phenomena Heat Transf. Eng., vol. 30, pp. 549-555, 2009.
58. Tarasevich, S. E., Yakovlev, A. B., Giniyatullin, A. A., and Shishkin, A. V., Heat and mass transfer in tubes with various twisted tape inserts, in Proc. of the ASME 2011 IMECE, Denver, CO, Paper No. IMECE2011-62088, ASME, New York, November 11-17, 2011.
59. T'Joen, C., Henk, H., Willcokx, A., Caniere, H., and De Paepe, M., Combined experimental and numerical flow field study of inclined louvered fins, Heat Transf. Eng., vol. 32, pp. 176-188, 2011.
60. Vasiliev, L. L., Zhuravlyov, A. S., and Shapovalov, A., Heat transfer enhancement in mini channels with micro/nano particles deposited on a heat-loaded wall, J. Enhanced Heat Transf., vol. 19, no. 1, pp. 13-24, 2012.
61. Wang, F. X., Shi, G. Q., Xu, T., and Zhang, Z. G., Experimental investigation on condensation heat transfer of R410A on single horizontal petal-shaped finned tube, J. Enhanced Heat Transf., vol. 19, no. 6, pp. 527-533, 2012.
62. Webb, R. L., Eckert, E. R. G., and Goldstein, R. J., Heat transfer and friction in tubes with repeated-rib roughness, Int. J. Heat Mass Transf., vol. 14, pp. 601-618, 1971.
63. Webb, R. L., Exckert, E. R. G., and Goldstein, R. J., Generalized heat transfer and friction correlations for tubes with repeatedrib roughness, Int. J. Heat Mass Transf., vol. 15, pp. 180-184, 1972.
64. Webb, R. L. and Kim, N.-H., Principles of Enhanced Heat Transfer, 2nd ed., Taylor & Francis, Boca Raton, FL, 2005.
65. Xi, Y., Yu, J., Xie, Y., and Gai, H., Single-phase flow and heat transfer in swirl microchannels, Exp. Thermal Fluid Sci., vol. 34, no. 8, pp. 1309-1315, 2010.
66. Xie, G. and Sunden, B., Conjugated analysis of heat transfer enhancement of an internal blade tip-wall with pin-fin arrays, J. Enhanced Heat Transf., vol. 18, no. 2, pp. 149-165, 2011.
67. Xu, Z. G., Qu, Z., Zhao, C.Y., and Tao, W.-Q., Experimental study of pool boiling heat transfer on metallic foam surface with u-shaped and v-shaped grooves, J. Enhanced Heat Transf., vol. 19, no. 6, pp. 549-559, 2012.
68. Zhang, J. and Manglik, R. M., Nucleate pool boiling of aqueous polymer solutions on a cylindrical heater, J. Non-Newtonian Fluid Mech., vol. 125, nos. 2-3, pp. 185-196, 2005. (Pubitemid 40289881)
69. Zhang, J. and Manglik, R. M., Additive adsorption and interfacial characteristics of nucleate pool boiling in aqueous surfactant solutions, J. Heat Transf., vol. 127, no. 7, pp. 684-691, 2005. (Pubitemid 41131966)
70. Zimparov, V., Petkov, V. M., and Bergles, A. E., Performance characteristics of deep corrugated tubes with twisted-tape inserts, J. Enhanced Heat Transf., vol. 19, no. 1, pp. 1-11, 2012.