Swirl flow heat transfer and pressure drop with twisted-tape inserts

Advances in Heat Transfer

Volumn 36, Issue C, 2003, Pages 183-266

  Manglik, Raj M ^a   Bergles, Arthur E ^b  

^a UNIVERSITY OF CINCINNATI   (United States)

^b RENSSELAER POLYTECHNIC INSTITUTE   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 77956761082     PISSN: 00652717     EISSN: None     Source Type: Book Series    
DOI: 10.1016/S0065-2717(02)80007-7     Document Type: Article

References (176)

1. Pilavachi P.A. Energy conservation R&D in industry. Heat Recov. Syst. CHP 7 (1987) 329-335
2. Fletcher L.S., and Andrews M.J. Technical/Market Assessment of Heat Exchanger Technology for Users of Natural Gas. Report No. GRI-94/0248 (1994), Gas Research Institute, Chicago, IL
3. rd Ed. (1998), McGraw-Hill, New York
4. Webb R.L. Principles of Enhanced Heat Transfer (1994), Wiley, New York
5. Joule J.P. On the surface condensation of steam. Phil. Trans. R. Soc. Lond. 151 (1861) 133-160
6. Bergles A.E., Jensen M.K., and Shome B. Bibliography on Enhancement of Convective Heat and Mass Transfer. Heat Transfer Laboratory Report No. HTL-23 (1995), Rensselaer Polytechnic Institute, Troy, NY
7. Bergles A.E., Jensen M.K., Somerscales E.F.C., and Manglik R.M. Literature Review of Heat Transfer Enhancement Technology for Heat Exchanges in Gas-Fired Applications. Report No. GRI 91-0146 (1991), Gas Research Institute, Chicago, IL
8. Jensen M.K., and Shome B. Literature Survey on Heat Transfer Enhancement Techniques in Refrigeration Applications. Report No. ORNL/Sub/91-SL794 (1994), Oak Ridge National Laboratory, Oak Ridge, TN
9. in press. Bhatnagar R.K., and Manglik R.M. Enhanced heat and mass transfer literature: Case for a digital library, with intelligent information retrieval. J. Enhanced Heat Transfer (2002)
10. Ohadi M.M., Dessiatoun S.V., Darabi J., and Salehi M. Active augmentation of single-phase and phase-change heat transfer; An overview. In: Manglik R.M., and Kraus A.D. (Eds). Process, Enhanced and Multiphase Heat Transfer (1996), Begell House, New York 271-286
11. Manglik R.M., and Bergles A.E. Heat Transfer Enhancement of Intube Flows in Process Heat Exchangers by Means of Twisted-Tape Inserts. Heat Transfer Laboratory Report No. HTL-8 (1991), Rensselaer Polytechnic Institute, Troy, NY
12. Whitham J.M. The effect of retarders in fire tube boilers. Street Railway J. 12 6 (1896) 374
13. Kirov N.Y. Turbulence promoters in boiler smoke tubes. J. Inst. Fuel 22 (1949) 192-196
14. US Patent No. 1,770,208. Kemmal J. Air Heater (1930) July 8
15. Webb R.L., Bergles A.E., and Junkhan G.H. Bibliography of US Patents on Augmentation of Convective Heat and Mass Transfer. Report No. HTL-32, ISU-ERI-Ames-84257 (1983), Iowa State University, Ames, IA
16. Brevi R., Anno M., Palmieri A., and Pitimada D. Forced convection heat transfer and burn-out measurements with twisted tapes. La Termotecnica 25 12 (1971) 619-625
17. Gambill W.R. Subcooled swirl flow boiling and burnout with electrically heated twisted tapes and zero wall flux. J. Heat Transfer 87 (1965) 342-348
18. Hong S.W., and Bergles A.E. Augmentation of laminar flow heat transfer in tubes by means of twisted-tape inserts. J. Heat Transfer 98 (1976) 251-256
19. (in Polish). Donevski B., and Kulesza J. Resistance coefficients for laminar and turbulent flow in swirling ducts. Archiwum Termodynamiki i Spalania 9 3 (1978) 497-506
20. Manglik R.M., and Bergles A.E. Heat transfer and pressure drop correlations for twisted-tape inserts in isothermal tubes. I. Laminar flows. J. Heat Transfer 115 (1993) 881-889
21. Manglik R.M., and Bergles A.E. Heat transfer and pressure drop correlations for twisted-tape inserts in isothermal tubes. II. Transition and turbulent flows. J. Heat Transfer 115 (1993) 890-896
22. Marner W.J., and Bergles A.E. Augmentation of highly viscous laminar heat transfer inside tubes with constant wall temperature. Exp. Thermal Fluid Sci. 2 (1989) 252-267
23. Manglik R.M., Bergles A.E., and Joshi S.D. Augmentation of heat transfer to laminar flow of non-Newtonian fluids in uniformly heated tubes with twisted-tape inserts. In: Shah R.K., et al. (Ed). Experimental Heat Transfer, Fluid Mechanics and Thermodynamics 1988 (1988), Elsevier, New York 676-684
24. Dasmahapatra J.K., and Raja Rao M. Augmentation of tube side heat transfer to power law fluids in laminar flow by means of twisted tape inserts. In: Keffer J.F., et al. (Ed). Experimental Heat Transfer, Fluid Mechanics and Thermodynamics 1991 (1991), Elsevier, New York 661-667
25. Klepper O.H. Heat transfer performance of short twisted tapes. AIChE Symp. Ser. 69 (1973) 87-93 131
26. Monheit M. Experimental evaluation of the convective characteristics of tubes with twisted tape inserts. In: Jensen M.K., and Carey V.P. (Eds). Advances in Enhanced Heat Transfer-1987. HTD-Vol. 68 (1987), ASME, New York 11-18
27. Junkhan G.H., Bergles A.E., Nirmalan V., and Ravigururajan T.S. Investigation of turbulators for fire tube boilers. J. Heat Transfer 107 (1985) 354-360
28. Burfoot D., and Rice P. Heat transfer and pressure drop characteristics of short lengths of swirl flow inducers interspaced along a circular duct. Chem. Engin. Res. Design 61 (1983) 253-258
29. Saha S.K., Gaitonde U.N., and Date A.W. Heat transfer and pressure drop characteristics of laminar flow in a circular tube fitted with regularly spaced twisted-tape elements. Exp. Therm. Fluid Sci. 2 (1989) 310-322
30. Bergles A.E., Lee R.A., and Mikic B.B. Heat transfer in rough tubes with tapegenerated swirl flow. J. Heat Transfer 91 (1969) 443-445
31. Shivkumar C., and Raja Rao M. Studies on compound augmentation of laminar flow heat transfer to generalized power law fluids in spirally corrugated tubes by means of twisted tape inserts. Proc. 1988 National Heat Transfer Conference. HTD-96 Vol. 1 (1988), ASME, New York 685-691
32. also published. Usui H., Sano Y., and Iwashita K. Heat transfer enhancement effects by combined use of internally grooved rough surfaces and twisted tapes. Heat Transfer Jpn. Res. 13 4 (1984) 19-32
33. Usui H., Sano Y., and Iwashita K. Heat transfer enhancement effects by combined use of internally grooved rough surfaces and twisted tapes. Int. Chem. Engin. 26 (1986) 97-104
34. Rao K.S. Augmentation of heat transfer in the axial ducts of electrical machines with tape, generated swirl flow. IEEE Trans. Power Apparatus Syst. 102 8 (1983) 2750-2756
35. in press. Manglik R.M., Maramraju S., and Bergles A.E. The scaling and correlation of low Reynolds number swirl flows and friction factors in circular tubes with twisted-tape inserts. J. Enhanced Heat Transfer 8 6 (2001)
36. Lee S., Inoue A., and Takahashi M. Critical heat-flux characteristics of R-113 boiling two-phase flow in twisted-tape-inserted tubes. Heat Transfer Jpn. Res. 24 3 (1995) 272-287
37. Tong W., Bergles A.E., and Jensen M.K. Critical heat flux and pressure drop of subcooled flow boiling in small-diameter tubes with twisted-tape inserts. J. Enhanced Heat Transfer 3 (1996) 95-108
38. Jensen M.K. An evaluation of the effect of twisted tape swirl generators in two phase flow heat exchangers. Heat Transfer Engin. 6 4 (1985) 19-30
39. Jensen M.K., and Bensler H.P. Saturated forced convective boiling heat transfer with twisted tape inserts. J. Heat Transfer 108 (1986) 93-99
40. Shatto D.P., and Peterson G.P. A review of flow boiling heat transfer with twisted tape inserts. J. Enhanced Heat Transfer 3 (1996) 233-257
41. st Ed. (1921), Constable and Co., London 191-201
42. Colburn A.P., and King W.J. Heat transfer and pressure drop in empty, baffled, and packed tubes. III. Relationships between heat transfer and pressure drop. Indust. Engin. Chem. 23 (1931) 919-923
43. Evans S.I., and Sarjant R.J. Heat transfer and turbulence in gases flowing inside tubes. J. Inst. Fuel 24 (1951) 216-227
44. Koch R. Druckverlust and warmeübergang bei verwirbelter strömung. VDI Forschungsheft 469 B24 (1958) 1-44
45. Kreith F., and Margolis D. Heat transfer and friction in turbulent vortex flow. Appl. Sci. Res. A8 (1959) 457-473
46. Smithberg E., and Landis F. Friction and forced convection heat transfer characteristics in tubes with twisted tape swirl generators. J. Heat Transfer 86 (1964) 39-49
47. Seymour E.V. Fluid flow through tubes containing twisted tapes. Engineer 222 (1966) 634-642
48. Manglik R.M., and Ranganathan C. Visualization of swirl flows generated by twisted-tape inserts in circular tubes. In: Giot M., et al. (Ed). Experimental Heat Transfer, Fluid Mechanics and Thermodynamics 1997 (1997), Edzioni ETFS, Pisa, Italy 1631-1636
49. Nair R.K. Performance of Twisted-Tape Inserts in Laminar and Turbulent Flow. M. S. thesis (1986), Department of Mechanical Engineering, Iowa State University, Ames, IA
50. Ibragimov M.M., Nomofelov E.V., and Subbotin V.I. Heat transfer and hydraulic resistance with swirl-type motion of liquid in pipes. Teploencrgetika 8 7 (1961) 57-60
51. Gambill W.R., and Bundy R.D. An evaluation of the present status of swirl flow heat transfer. AMSE Peper No. 62-HT-42 (1962), ASME, New York
52. Gambill W.R., and Bundy R.D. High-flux heat transfer characteristics of pure ethylene glycol in axial swirl flow. AIChE J. 9 (1963) 55-59
53. Lopina R.F., and Bergles A.E. Heat transfer and pressure drop in tape generated swirl flow of single-phase water. J. Heat Transfer 91 (1969) 434-442
54. Marner W.J., and Bergles A.E. Augmentation of tubeside laminar flow heat transfer by means of twisted-tape inserts, static-mixer inserts, and internally finned tubes. Heat Transfer 1978 Vol. 2 (1978), Hemisphere, Washington, DC 583-588
55. Bandyopadhyay P.S., Gaitonde U.N., and Sukhatme S.P. Influence of free convection on heat transfer during laminar flow in tubes with twisted tapes. Exp. Therm Fluid Sci. 4 (1991) 577-586
56. Date A.W. Numerical prediction of laminar flow and heat transfer in a tube with twisted-tape insert: Effects of property variations and buoyancy. J. Enhanced Heat Transfer 7 (2000) 217-229
57. Nazmeev Y.G. Intensification of convective heat exchange by ribbon swirlers in the flow of anomalously viscous liquids in pipes. J. Engin. Phys. 37 (1979) 910-913
58. in press. Singh Y.H., and Manglik R.M. Laminar forced convection in pseudoplastic fluids in the thermal entrance of semi-circular ducts. Chem. Engin. J. (2002)
59. Etemad S.Gh., and Mujumdar A.S. Effects of variable viscosity and viscous dissipation on laminar convection heat transfer of a power law fluid in the entrance region of a semi-circular duct. Int. J. Heat Mass Transfer 38 (1995) 2225-2238
60. Date A.W., and Singham J.R. Numerical prediction of friction and heat transfer characteristics of fully developed laminar flow in tubes containing twisted tapes. ASME Paper No. 72-HT-17 (1972), ASME, New York
61. Date A.W. Prediction of fully-developed flow in a tube containing a twisted-tape. Int. J. Heat Mass Transfer 17 (1974) 845-859
62. DuPlessis J.P., and Kröger D.G. Friction factor prediction for fully developed laminar twisted-tape flow. Int. J. Heat Mass Transfer 27 (1984) 2095-2100
63. DuPlessis J.P., and Kröger D.G. Heat transfer correlation for thermally developing laminar flow in a smooth tube with a twisted-tape insert. Int. J. Heat Mass Transfer 30 (1987) 509-515
64. Hong S.W., and Bergles A.E. Laminar flow heat transfer in the entrance region of semi-circular tubes with uniform heat flux. Int. J. Heat Mass Transfer 19 (1976) 123-124
65. Manglik R.M., and Bergles A.E. Laminar flow heat transfer in a semi-circular tube with uniform wall temperature. Int. J. Heat Mass Transfer 31 (1988) 625-636
66. Manglik R.M., and Bergles A.E. Fully developed laminar heat transfer in circular-segment ducts with uniform wall temperature. Numer. Heat Transfer A26 (1994) 499-519
67. in press. Manglik R.M., and You L. On the characteristics of swirl flows induced by twisted-tape inserts in circular tubes. J. Fluid Mechan (2002)
68. Agarwal K.N., and Varma H.K. Experimental study of heat transfer augmentation versus pumping power in a horizontal R12 evaporator. Int. J. Refriger. 14 (1991) 273-281
69. Gambill W.R., Bundy R.D., and Wansbrough R.W. Heat transfer, burnout, and pressure drop of water in swirl flow tubes with internal twisted tapes. Chem. Engin. Prog. Symp. Ser. 57 32 (1961) 127-137
70. Royal J.H., and Bergles A.E. Augmentation of horizontal in-tube condensation by means of twisted-tape inserts and internally-finned tubes. J. Heat Transfer 100 (1978) 17-24
71. Royal J.H., and Bergles A.E. Pressure drop and performance evaluation of augmented in-tube condensation. Heat Transfer 1978 Vol. 2 (1978), Hemisphere, Washington, DC 459-464
72. Luu M., and Bergles A.E. Experimental study of the augmentation of in-tube condensation of R-113. ASHRAE Transac. 85 Part 2 (1979) 132-145
73. Luu M., and Bergles A.E. Enhancement of horizontal in-tube condensation of R-113. ASHRAE Transact. 86 Part 1 (1980) 293-312
74. Migay V.K., and Golubev L.K. Friction and heat transfer in turbulent swirl flow with a variable swirl generator in a pipe. Heat Transfer Soviet Res. 2 3 (1970) 68-73
75. Algifri A.H., and Bhardwaj R.K. Prediction of the heat transfer for decaying turbulent swirl flow in a tube. Int. J. Heat Mass Transfer 9 (1985) 1637-1643
76. Zozulya N.V., and Shkuratov I.Y. Effects of the length of a twisted-tape turbulence promoter and its initial twisting pitch on augmenting of heat transfer inside a tube. Heat Transfer Soviet Res. 6 6 (1974) 98-100
77. Saha S.K., Gaitonde U.N., and Date A.W. Heat transfer and pressure drop characteristics of turbulent flow in a circular tube fitted with regularly spaced twisted-tape elements. Exp. Therm. Fluid Sci. 3 (1990) 632-640
78. Jayaraj D., Masilamani J.G., and Seetharamu K.N. Heat transfer augmentation by tube inserts in heat exchangers. Society of Automotive Engineers Passenger Car Meeting and Exposition. SAE Paper No. 891983. Dearborn, MI (1989)
79. US Patent No. 4,700,749, October 20. Cadars P. Swirl-Generating Helical Agitator for Heat Exchanger Tuber (1987)
80. Davidson D.M. Radiation fin augmentation in a tube with tape-generated swirl flow. ASME-JSME Thermal Engineering Joint Conference Proceedings Vol. 1 (1983), ASME, New York 403-410
81. Beckermann C., and Goldschmidt V.W. Heat transfer augmentation in the flueway of a water-heater. ASHRAE Transact. 92 Part 2B (1986) 485-495
82. Watanabe K., Taira T., and Mori Y. Heat transfer augmentation in tubular flow by twisted tapes at high temperatures and optimum performance. Heat Transfer Jpn. Res. 12 3 (1983) 1-31
83. US Patent No. 4,559,998, December 24. Counterman W.S. Recuperative Heat Exchanger Having Radiation Absorbing Turbulator (1985)
84. Armstrong R.D., and Bergles A.E. A study of enhanced ceramic tubes for high temperature waste heat recovery. In: Hetsroni G. (Ed). Heat Transfer 1990 Vol. 4 (1990), Hemisphere, New York 21-26
85. Yamada Y., Akai M., and Mori Y. Shel-and-tube side heat transfer augmentation by the use of wall radiation in a crossflow shell-and-tube heat exchanger. J. Heat Transfer 106 (1984) 735-742
86. Weisman J., Yang J.Y., and Usman S. A phenomenological model for boiling heat transfer and the critical heat flux in tubes containing twisted tapes. Int. J. Heat Mass Transfer 37 (1994) 69-80
87. Fujita Y., and Lopez A.M. Heat-transfer enhancement of twisted-tape inserts in turbulent pipe flows. Heat Transfer Jpn. Res. 24 4 (1995) 378-396
88. Saha S.K., and Dutta A. Thermohydraulic study of laminar swirl flow through a circular tube fitted with twisted tapes. J. Heat Transfer 123 (2001) 417-427
89. Saha S.K., Dutta A., and Dhal S.K. Friction and heat transfer characteristics of laminar swirl flow through a circular tube fitted with regularly spaced twisted-tape elements. Int. J. Heat Mass Transfer 44 (2001) 4211-4223
90. Zimparov V. Enhancement of heat transfer by a combination of three-start spirally corrugated tubes with a twisted tape. Int. J. Heat Mass Transfer 44 (2001) 551-574
91. Manglik R.M., and Bergles A.E. Heat tranfer enhancement and pressure drop in viscous liquid flows in isothermal tubes with twisted-tape inserts. Wärme Stoffübertragung 27 (1992) 249-257
92. in press. Manglik R.M., and Yera K. Application of twisted-tape inserts in shell-and-tube exchangers: Optimization of enhanced thermal-hydraulic performance. Int. J. Heat Exchang (2002)
93. Hong S.W., and Bergles A.E. Augmentation of Laminar Flow Heat Transfer in Tubes by Means of Twisted-Tape Inserts. Technical Report No. HTL-5, ISU-ERI-Ames-75011 (1974), Iowa State University, Ames, IA
94. Shah R.K., and London A.L. Laminar flow forced convection in ducts. In: Irvine Jr. T.F., and Hartnett J.P. (Eds). Supplement 1 to "Advances in Heat Transfer" (1978), Academic Press, New York
95. Manglik R.M., and Bergles A.E. A correlation for laminar flow enhanced heat transfer in uniform wall temperature circular tubes with twisted-tape inserts. In: Jensen M.K., and Pate M.B. (Eds). Advances in Enhanced Heat Transfer-1987. HTD Vol. 68 (1987), ASME, New York 19-25
96. Sieder E.N., and Tate G.E. Heat transfer and pressure drop of liquids in tubes. Indust. Engin. Chem. 28 (1936) 1429-1435
97. Ishikawa T., and Kamiya T. Limits of Reynolds number for effective use of heat transfer promoters: Twisted tape and static mixer. Heat Transfer Jpn. Res. 23 2 (1994) 185-197
98. Shilling R.L. Private communications (2000), Brown Fintube Company, Houston, TX
99. Gnielinski V. New equations for heat and mass transfer in turbulent pipe and channel flow. Int. Chem. Engin. 16 (1976) 359-368
100. Kidd Jr. G.J. Heat transfer and pressure drop for Nitrogen flow in tubes containing twisted tapes. AIChE J. 15 (1969) 581-585
101. Bolla G., De Giorgio G., and Pedrocchi E. Heat transfer and pressure drop comparison in tubes with transverse ribs and with twisted tapes. Energia Nucleare 20 (1973) 604-613
102. [in Polish]. Donevski B., and Kulesza J. Flow resistance in isothermal turbutent flows in tubes with spiral inserts. Zeszyty Naukowe Politechniki Lodzkiej, Mechanika z. 58 358 (1980) 5-25
103. Lopina R.F., and Bergles A.E. Heat Transfer and Pressure Drop in Tape Generated Swirl Flow. MIT Engineering Projects Laboratory Report No. 70281-47 (1967), Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA
104. DuPlessis J.P. Laminar Flow and Heat Transfer in a Smooth Tube with a Twisted-Tape Insert. Ph.D. Dissertation (1982), University of Stellenbosch, South Africa
105. (in German); English translation republished as Pressure loss in fluids flowing in pipes equipped with helical screws. Lecjaks Z., Machač I., and Šir J. Druckverlust bei der strömung einer flüssigkeit durch ein rohr mit schraubeneinbauten. Chem. Engin. Process. 18 (1984) 67-72
106. Lecjaks Z., Machač I., and Šir J. Int. Chem. Engin. 27 (1987) 205-209
107. [in Russian]. Migai V.K. Friction and heat transfer in twisted flow inside a tube. Izuvestiia Akademii Nauk SSSR Energetika I Transp. 5 (1966) 143-151
108. Nazmeev V.G., and Nikolaev N.A. Correlation of experimental data on heat transfer in tubes with twisted tape turbulence promoters. Therm Engin. 27 3 (1980) 151-152
109. Marner W.J., Bergles A.E., and Chenoweth J.M. On the presentation of performance data for enhanced tubes used in shell-and-tube heat exchanges. J. Heat Transfer 105 (1983) 358-365
110. Gutstein M.U., Converse G.L., and Peterson J.R. Theoretical Analysis and Measurement of Single-Phase Pressure Losses and Heat Transfer for Helical Flow in a Tube. Technical Note D-6097 (1970), National Aeronautics and Space Administration, Washington, DC
111. Migay V.K. Hydraulic drag and heat transfer in tubes with internal twisted-tape swirl generators: Case of single-phase incompressible flow. Heat Transfer Soviet Res. 22 6 (1990) 824-830
112. Lokanath M.S. A Study of the Effect of Partial and Full Length Twisted Tape Inserts on Laminar Flow Heat Transfer in Tubes. Ph.D. Thesis (1992), University of Poona, India
113. Agarwal S.K., and Raja Rao M. Heat transfer augmentation for the flow of a viscous liquid in circular tubes using twisted-tape inserts. Int. J. Heat Mass Transfer 39 (1996) 3547-3557
114. Al-Fahed S., Chamra L.M., and Chakroun W. Pressure drop and heat transfer comparison for both microfin tube and twisted-tape inserts in laminar flow. Exp. Therm. Fluid Sci. 18 (1999) 323-333
115. Blasius H. Das ähnlichkeitsgesetz bei reibungsvorgängen in flüssigkeiten. Forsch. Arb. Ing.-Wes., No. 131, Berlin (1913)
116. rd Ed. (1954), McGraw-Hill, New York
117. Harms T.M., Jog M.A., and Manglik R.M. Effects of temperature-dependent viscosity variations and boundary conditions on fully developed laminar forced convection in a semicircular duct. J. Heat Transfer 120 (1998) 600-605
118. Thorsen R.S., and Landis F. Friction and heat transfer characteristics in turbulent swirl flow subjected to large transverse temperature gradients. J. Heat Transfer 90 (1968) 87-98
119. Driius M.-R.M., Shkema R.K., and Shlančiauskas A.A. Heat transfer in a twisted stream of water in a tube. Int. Chem. Engin. 20 (1980) 486-489
120. Donevski B., Plocek M., Kulesza J., and Sasic M. Analysis of tubeside laminar and turbulent flow heat transfer with twisted tape inserts. In: Deng S.-J., et al. (Ed). Heat Transfer Enhancement and Energy Conservation (1990), Hemisphere, New York 175-185
121. Klaczak A. Analysis of the operation of exchanger tubes with internal axial helical screw generator of swirl. Rev. Gene. Therm. 10 112 (1971) 341-351
122. Klaczak A. Heat transfer in tubes with spiral and helical turbulators. J. Heat Transfer 95 (1973) 557-558
123. Fryer P.J., and Whalley P.B. The effect of swirl on the liquid distribution in annular two-phase flow. Int. J. Multiphase Flow 8 (1982) 285-289
124. Feinstein L., and Lundberg R.E. Study Of Advanced Techniques for Cooling Very High Power Microwave Tubes. Report No. RADC-TDR-63-242 (1963), Rome Air Development Center
125. Lopina R.F., and Bergles A.E. Subcooled boiling of water in tape generated swirl flow. J. Heat Transfer 95 (1973) 281-283
126. Vandervort C.L., Bergles A.E., and Jensen M.K. An experimental study of critical heat flux in high heat flux subcooled boiling. Int. J. Heat Mass Transfer 37 Suppl. 1 (1994) 161-173
127. Gambill W.R. Generalized prediction of burnout heat flux for flowing, subcooled, wetting liquids. Chem. Engin. Progr. Symp. Ser. 59 41 (1963) 71-87
128. Driius M.-R., Shkema R.K., and Shlančiauskas A.A. Boiling crisis in swirled flow of water in pipes. Heat Transfer Soviet Res. 10 4 (1978) 1-7
129. Inasaka F., Nariai H., Fujisaki W., and Ishiguro H. Critical heat flux of subcooled flow boiling in tubes with internal twisted tape. Proceedings of the ASME/JSME Thermal Engineering Joint Conference Vol. 2 (1991), ASME, New York 65-70
130. Nariai H., Inasaka F., Fujisaka W., and Ishiguro H. Critical heat flux of subcooled flow boiling in tubes with internal twisted tapes. Proceedings of the ANS Winter Meeting (1991), ANS, New York 38-46
131. Inasaka F., and Nariai H. Evaluation of subcooled critical heat flux correlations for tubes with and without internal twisted tapes. Proceedings of the 5th International Topical Meeting on Reactor Thermal Hydraulics Vol. 4 (1992) 919-928
132. Gaspari G.P., and Cattadori G. Subcooled flow boiling in tubes with and without turbulence promoters. Exp. Therm. Fluid Sci. 8 (1994) 28-34
133. Rome, Italy. Cardella A., Celata G.P., Dell'Orco G., Gaspari G.P., Cattadori G., and Mariani A. Thermal hydraulic experiments for the NET divertor. Proceedings of the 17th Symposium on Fusion Technology Vol. 1 (1992) 206-210
134. Tong L.S., and Tang Y.S. Boiling Heat Transfer and Two Phase Flow (1997), Taylor & Francis, Washington, DC 457-480
135. Pabisz Jr. R.A., and Bergles A.E. Using presure drop to predict the critical heat flux in multiple tube, subcooed boiling systems. In: Giot M., et al. (Ed). Experimental Heat Transfer, Fluid Mechanics and Thermodynamics 1997 (1997), Edizioni ETS, Pisa, Italy 851-858
136. Nariai H., Inasaka F., Ishikawa A., and Kinoshita H. Effect of internal twisted tape on critical heat flux of subcooled flow boiling under nonuniform heating condition. Transactions of the JSME 60 (1994) 4215-4221
137. Kinoshita K., Yoshida T., Nariai H., and Inasaka F. Study on the mechanism of critical heat flux enhancement for subcooled flow boiling in a tube with internal twisted tape under nonuniform heating conditions. Heat Transfer Jpn. Res. 25 (1996) 293-307
138. Nariai H., Inasaka F., Ishikawa A., and Kinoshita H. Critical heat flux of subcooled flow boiling in tube with internal twisted tape under non-uniform heating: Experimental results and discussion of mechanism. Proceedings of 30th Japan Heat Transfer Symposium (1995), Heat Transfer Society of Japan, Tokyo, Japan 490-492
139. Suzuki S., and Kumugai S. Transient behavior of subcooled forced convective boiling with twisted tape inserts. Heat Transfer Jpn. Res. 25 (1996) 178-191
140. Araki M., Ogawa M., Kunugi T., Satoh K., and Suzuki S. Experiments on heat transfer of smooth and swirl tubes under one-sided heating conditions. Int. J. Heat Mass Transfer 39 (1996) 3045-3055
141. Boscary J., Fabre J., and Schlosser J. Critical heat flux of water subcooled flow in one-side heated swirl tubes. Int. J. Heat Mass Transfer 42 (1999) 287-301
142. Ornatskii A.P., and Vinyarskii L.S. Critical heat transfer in the forced motion of unheated water-alcohol mixtures in tubes of diameter 0.5 mm. High Temp. 3 (1965) 881-882
143. Ornatskii A.P., and Vinyarskii L.S. Heat transfer crisis in a forced flow of underheated water in small-bore tubes. High Temp. 3 (1965) 400-405
144. Bergles A.E. Survey and evaluation of techniques to augment convective heat and mass transfer. Progress in Heat and Mass Transfer Vol. I (1969), Pergamon Press, Oxford 331-424
145. Matzner B., Casterline J.E., Moek E.O., and Wikhammer G.A. Critical heat flux in long tubes at 1000 psi. ASME Paper No. 65-WA/HT-30 (1965), ASME, New York
146. Kakaç S. The effect of augmented surfaces on two-phase flow instabilities. In: Kakaç S., et al. (Ed). Heat Transfer Enhancement of Heat Exchangers (1999), Kluwer Academic, Dordrecht, The Netherlands 447-465
147. Kedzierski M.A., and Kim M.S. Convective Boiling and Condensation Heat Transfer with a Twisted-Tape Insert for R12, R22, R152a, R134a, R290, R32/R134a, R32/R152a, R290/R134a. R134a/R600a. Report NISTIR 5905 (1997), National Institute of Standards and Technology, Gaithersburg, MD
148. Part A. Doeffler S., Groeneveld D.C., and Schenk J.R. Experimental study of the effects of flow inserts on heat transfer and critical heat flux. New Orleans, LA. Proceedings of the 4th International Conference on Nuclear Engineerng (ICONE-4) Vol. 1 (1996) 41-49
149. Groeneveld D.C., Doeffler S., Tain R.M., Hammouda N., and Cheng S.C. Fluid-to-fluid modelling of the critical heat flux and post-dryout heat transfer. In: Giot M., et al. (Ed). Experimental Heat Transfer, Fluid Mechanics and Thermodynamics 1997 Vol. 2 (1997), Edizioni ETS, Pisa, Italy 859-866
150. Carey V.P., and Shah R.K. Design of compact and enhanced heat exchangers for liquid-vapor phase-change applications. Two-Phase Flow Heat Exchangers (1988), Kluwer Academic, Dordrecht, The Netherlands 909-968
151. Royal J.H., and Bergles A.E. Augmentation of Horizontal In-Tube Condensation of Steam. Heat Transfer Laboratory Report No. HTL-9 (1975), Iowa State University, Ames, IA
152. Royal J.H., and Bergles A.E. Experimental study of the augmentation of horizontal in-tube condensation. ASHRAE Trans. 82 Part 1 (1976) 919-931
153. Helmer W.A., and Iqbal I. Laminar heat transfer in a circular tube with twisted tapes during condensation. ASHRAE Trans. 86 Part 2 (1980) 662-674
154. Luu M., and Bergles A.E. Augmentation of Horizontal In-Tube Condensation of R-113. Heat Transfer Laboratory Report No. HTL-23 (1979), Iowa State University, Ames, IA
155. Azer N.Z., and Said S.A. Augmentation of Condensation Heat Transfer by Internally Finned Tubes and Twisted Tapes. Final Technical Report (1981), Department of Mechanical Engineering, Kansas State University
156. Said S.A., and Azer N.Z. Heat transfer and pressure drop during condensation inside horizontal tubes with twisted-tape inserts. ASHRAE Trans. 89 Part 1 (1983) 96-113
157. Date A.W., and Saha S.K. Numerical prediction of laminar flow and heat transfer characteristics in a tube fitted with regularly spaced twisted-tape elements. Int. J. Heat Fluid Flow 11 4 (1990) 346-354
158. Penney W.R. The spiralator: Initial tests and correlations. AIChE Preprint No. 16, 8th National Heat Transfer Conference. Los Angeles, CA (1965)
159. Mayinger F., Schad O., and Weiss E. Investigations into The Critical Heat Flux In Boiling. Mannesmann Augsburg Nürnberg Final Report No. 09.03.01 (1966), MAN, Nürnberg, Germany
160. Berenson P.J. An experimental investigation of flow stability in multitube forced-convection vaporizers. ASME Paper No. 65-HT-61 (1965), ASME, New York
161. Gambill W.R., and Greene N.D. A preliminary study of boiling burnout heat fluxes for water in vortex flow. Chem. Engin. Prog. 54 10 (1958) 68-76
162. Weeds J., and Dhir V.K. Experimental study of the enhancement of critical heat flux using tangential flow injection. Fundamentals of Heat Transfer in Fusion Energy Systems. HTD-Vol. 24 (1983), ASME, New York 11-18
163. Van Rooyen R.S., and Kröger D.G. Laminar flow heat transfer in internally finned tubes with twisted-tape inserts. Heat Transfer 1978 Vol. 2 (1978), Hemisphere, Washington, DC 577-581
164. Zhou Q.T., Ye S.Y., Ou-Yang Y.H., and Gu N.Z. Combined enhancement of tube-side heat transfer in cast-iron air preheater. Heat Transfer 1990 Vol. 4 (1990), Hemisphere, New York 39-44
165. Muralidhar Rao M., and Sastri V.M.K. Experimental investigation of fluid flow and heat transfer in a rotating tube with twisted-tape inserts. Heat Transfer Engin. 16 2 (1995) 19-28
166. Boyd R.D., Smith A., and Turknett J.C. Two-dimensional wall temperature measurements and heat transfer enhancement for top-heated horizontal channels with flow boiling. Exp. Therm. Fluid Sci. 11 (1995) 372-386
167. Pabisz Jr. R.A., and Bergles A.E. Enhancement of Critical Heat Flux in Subcooled Flow Boiling Using Alcohol Additives and Twisted-Tape Inserts. Heat Transfer Laboratory Report No. HTL-25 (1996), Rensselaer Polytechnic Institute, Troy, NY
168. Bergles A.E., Blumenkrantz A.R., and Taborek J. Performance evaluation criteria for enhanced heat transfer. Heat Transfer 1974, Proceedings of the 5th International Heat Transfer Conference Vol. II (1974), The Japan Society of Mechanical Engineers, Tokyo, Japan 234-238
169. Bergles A.E., Junkhan G.H., and Bunn R.L. Extended performance evaluation criteria for enhanced heat transfer surfaces. Lett. Heat Mass Transfer 1 (1974) 113-119
170. Nelson R.M., and Bergles A.E. Performance evaluation for tubeside heat transfer enhancement of a flooded evaporator water chiller. ASHRAE Trans. 92 Part 1B (1986) 739-755
171. Zimparov V. Enhancement of heat transfer by a combination of a single start spirally corrugated tubes with a twisted tape. Thermal Sciences 2000, Proceedings of the ASME-ZSITS International Thermal Science Seminar (2000), ZSITS, Ljubljana, Slovenia 395-401
172. Megerlin F.E., Murphy R.W., and Bergles A.E. Augmentation of heat transfer in tubes by use of mesh and brush inserts. J. Heat Transfer 96 (1974) 145-151
173. Webb R.L. Performance evaluation criteria for enhanced tube geometries used in two-phase heat exchangers. In: Shah R.K., et al. (Ed). Heat Transfer Equipment Design (1988), Hemisphere, New York 697-704
174. Somerscales E.F.C., and Bergles A.E. Enhancement of heat transfer and fouling mitigation. Adv. Heat Transfer 30 (1997) 197-253
175. Anonymous. Gas-suspension Task III Final Report. Babcock and Wilcox Reports 1201 and 1207 (1960)
176. U. S. Patent No. 1,916,337. Schmidt W.A. Heat Interchanging Apparatus (1933)