Molecular-to-large-scale heat transfer with multiphase interfaces: Current status and new directions

Journal of Heat Transfer

Volumn 131, Issue 12, 2009, Pages 1-11

  Manglik, Raj M ^a   Jog, Milind A ^a  

^a 705 Engineering Research Center   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BOILING HEAT TRANSFER; CURRENT STATUS; ENGINEERING APPLICATIONS; EXPERIMENTAL INVESTIGATIONS; FILM COATINGS; HEAT TRANSPORT; INTERFACIAL BEHAVIORS; NEW DIRECTIONS; RESEARCH COMMUNITIES; SPRAY COOLING;

COMPUTER SIMULATION; HEAT EXCHANGERS; MULTIPHASE FLOW; PHASE INTERFACES;

HEAT TRANSFER;

EID: 77950985670     PISSN: 00221481     EISSN: 15288943     Source Type: Journal    
DOI: 10.1115/1.4000007     Document Type: Article

References (174)

1. Jaycock, M. J., and Parfitt, G. D., 1981, Chemistry of Interfaces, Ellis Horwood, Chichester, UK.
2. Myers, D., 1999, Surfaces, Interfaces, and Colloids, 2nd ed., Wiley-VCH, New York.
3. Hunter, R. J., 2001, Foundations of Colloid Science, Oxford University Press, Oxford, UK.
4. Bergles, A. E., 1988, Fundamentals of Boiling and Evaporation, Two-Phase Flow Heat Exchangers: Thermal-Hydraulic Fundamentals and Design, S. Kakac, A. E. Bergles, and E. O. Fernandes, eds., Kluwer, The Netherlands, pp. 159-200.
5. Dhir, V. K., 1998, "Boiling Heat Transfer," Annu. Rev. Fluid Mech., 30, pp. 365-401.
6. Kenning, D. B. R., 1999, "What Do We Really Know About Nucleate Boiling?," IMechE Conference Transactions, 6th UK National Heat Transfer Conference, Edinburgh, UK, pp. 143-167.
7. Collier, J. G., and Thome, J. R., 2001, Convective Boiling and Condensation, 3rd ed., Oxford University Press, Oxford, UK.
8. Clift, R., Grace, J. R., and Weber, M. E., 1978, Bubbles, Drops, and Particles, Academic, New York.
9. Sadhal, S. S., Ayyaswamy, P. S., and Chung, J. N., 1997, Transport Phenomena With Drops and Bubbles, Springer, New York.
10. De Gennes, P., Brochard-Wyard, F., and Quere, D., 2004, Capillarity and Wetting Phenomena: Drops, Bubbles, Pearls, Waves, Springer, New York.
11. Jakob, M., 1936, "Heat Transfer in Evaporation and Condensation-I," Mech. Eng. (Am. Soc. Mech. Eng.), 58, pp. 643-660.
12. McAdams, W. H., Kennel, W. E., Mindon, C. S., Carl, R., Picornel, P. M., and Dew, J. E., 1949, "Heat Transfer to Water With Surface Boiling," Ind. Eng. Chem., 41, pp. 1945-1953.
13. Morgan, A. I., Bromley, L. A., and Wilke, C. R., 1949, "Effect of Surface Tension on Heat Transfer in Boiling," Ind. Eng. Chem., 41, pp. 2767-2769.
14. Rohsenow, W. M., 1952, "A Method of Correlating Heat Transfer Data for Surface Boiling of Liquids," Trans. ASME, 74(3), pp. 969-976.
15. Hsu, Y. Y., 1962, "On the Size of Range of Active Nucleation Cavities on a Heating Surface," ASME J. Heat Transfer, 84, pp. 207-216.
16. Han, C. -Y., and Griffith, P., 1965, "The Mechanism of Heat Transfer in Nucleate Pool Boiling-Part I: Bubble Initiation, Growth and Departure," Int. J. Heat Mass Transfer, 8(6), pp. 887-904.
17. Han, C.-Y., and Griffith, P., 1965, "The Mechanism of Heat Transfer in Nucleate Pool Boiling-Part II: The Heat Flux-Temperature Difference Relation," Int. J. Heat Mass Transfer, 8(6), pp. 905-914.
18. Dhir, V. K., and Liaw, S. P., 1989, "Framework for a Unified Model for Nucleate and Transition Pool Boiling," ASME J. Heat Transfer, 111, pp. 739-746.
19. Lay, J. H., and Dhir, V. K., 1995, "Shape of a Vapor Stem During Nucleate Boiling of Saturated Liquids," ASME J. Heat Transfer, 117, pp. 394-401.
20. Manglik, R. M., and Kraus, A. D., 1996, Process, Enhanced, and Multiphase Heat Transfer, Begell House, New York.
21. Dhir, V. K., 2001, "Numerical Simulation of Pool-Boiling Heat Transfer," AIChE J., 47(4), pp. 813-834.
22. Bergles, A. E., Lienhard, J. H., Kendall, G. E., and Griffith, P., 2003, "Boiling and Evaporation in Small Diameter Channels," Heat Transfer Eng., 24(1), pp. 18-40.
23. Thomas, O. C., Cavicchi, R. E., and Tarlov, M. J., 2003, "Effect of Surface Wettability on Fast Transient Microboiling Behaviour," Langmuir, 19, pp. 6168-6177.
24. Shoji, M., 2004, "Studies of Boiling Chaos: A Review," Int. J. Heat Mass Transfer, 47(6-7), pp. 1105-1128.
25. Bergles, A. E., 2008, "Thermal-Hydraulic Phenomena in Microchannels With Boiling," Heat Transfer Res., 39(4), pp. 327-346.
26. Subramani, A., Jog, M. A., and Manglik, R. M., 2008, "Air-Water Ebullience Systems: Visualizing Single Bubble to Wave Instability Signatures," ASME J. Heat Transfer, 130(8), p. 080905.
27. Chandra, S., and Avedisian, C. T., 1991, "On the Collision of a Droplet With a Solid Surface," Proc. R. Soc. London, Ser. A, 432(1884), pp. 13-41.
28. Mundo, C., Sommerfeld, M., and Tropea, C., 1995, "Droplet-Wall Collisions: Experimental Studies of the Deformation and Breakup Process," Int. J. Multiphase Flow, 21, pp. 151-173.
29. Pasandideh-Fard, M., Qiao, Y. M., Chandra, S., and Mostaghimi, J., 1996, "Capillary Effects During Droplet Impact on a Solid Surface," Phys. Fluids, 8(3), pp. 650-658.
30. Mao, T., Kuhn, D. C. S., and Tran, H., 1997, "Spread and Rebound of Liquid Droplets Upon Impact on Flat Surfaces," AIChE J., 43(9), pp. 2169-2179.
31. Park, H., and Carr, W. W., 2003, "Single Drop Impaction on a Solid Surface," AIChE J., 49(10), pp. 2461-2471.
32. Ukiwe, C., and Kwok, K. Y., 2005, "On the Maximum Spreading Diameter of Impacting Droplets on Well Prepared Solid Surfaces," Langmuir, 21, pp. 666-673.
33. Yarin, A. L., 2006, "Drop Impact Dynamics: Splashing, Spreading, Receding, Bouncing," Annu. Rev. Fluid Mech., 38, pp. 159-192.
34. Sikalo, S., and Ganic, E. N., 2006, "Phenomena of Droplet-Surface Interactions," Exp. Therm. Fluid Sci., 31, pp. 97-110.
35. Sanjeev, A., Huzayyin, O., Gatne, K. P., Manglik, R. M., and Jog, M. A., 2008, "Short Time Impact and Cooling of Water Droplets Impinging on Hydrophobic and Hydrophilic Surfaces," ASME J. Heat Transfer, 130(8), p. 080903.
36. Nukiyama, S., 1966, "The Maximum and Minimum Values of the Heat Q Transmitted From Metal to Boiling Water Under Atmospheric Pressure," Int. J. Heat Mass Transfer, 9, pp. 1419-1433.
37. Jakob, M., and Fritz, W., 1931, "Versuche über den Verdampfungsvorgang," Forsch. Geb. Ingenieurwes., 2, pp. 435-447.
38. Berenson, P. J., 1962, "Experiments on Pool-Boiling Heat Transfer," Int. J. Heat Mass Transfer, 5(10), pp. 985-999.
39. Cooper, M. G., and Lloyd, A. J. P., 1969, "The Microlayer in Nucleate Pool Boiling," Int. J. Heat Mass Transfer, 12(8), pp. 895-913.
40. Roy Chowdhury, S. K., and Winterton, R. H. S., 1985, "Surface Effects in Pool Boiling," Int. J. Heat Mass Transfer, 28(10), pp. 1881-1889.
41. Bar-Cohen, A., 1992, "Hysteresis Phenomena at the Onset of Nucleate Boiling," ASME Conference on Pool and External Flow Boiling, ASME, New York, pp. 1-14.
42. Wang, C. H., and Dhir, V. K., 1993, "Effect of Surface Wettability on Active Nucleation Site Density During Pool Boiling of Water on a Vertical Surface," ASME J. Heat Transfer, 115, pp. 659-669.
43. Chen, J. C., 2003, "Surface Contact and Its Significance for Multiphase Heat Transfer: Diverse Examples," ASME J. Heat Transfer, 125(4), pp. 549-566.
44. Thome, J. R., 1990, Enhanced Boiling Heat Transfer, Hemisphere, New York.
45. Bergles, A. E., 1997, "Enhancement of Pool Boiling," Int. J. Refrig., 20(8), pp. 545-551.
46. Bergles, A. E., 2000, "New Frontiers in Enhanced Heat Transfer," Advances in Enhanced Heat Transfer (HTD), Vol. 365, R. M. Manglik, T. S. Ravigururajan, A. Muley, R. A. Papar, and J. Kim, eds., ASME, New York, pp. 1-8.
47. Manglik, R. M., 2003, "Heat Transfer Enhancement," Heat Transfer Handbook, A. Bejan and A. D. Kraus, eds., Wiley, New York, Chap. 14.
48. Manglik, R. M., and Bergles, A. E., 2004, "Enhanced Heat and Mass Transfer in the New Millennium: A Review of the 2001 Literature," J. Enhanced Heat Transfer, 11(2), pp. 87-118.
49. Manglik, R. M., 2006, "On the Advancements in Boiling, Two-Phase Flow Heat Transfer, and Interfacial Phenomena," ASME J. Heat Transfer, 128(12), pp. 1237-1242.
50. Westwater, J. W., and Santangelo, J. G., 1955, "Photographic Study of Boiling," Ind. Eng. Chem., 47(8), pp. 1605-1610.
51. Gaertner, R. F., 1965, "Photographic Study of Nucleate Pool Boiling on a Horizontal Surface," ASME J. Heat Transfer, 87(1), pp. 17-29.
52. Basu, N., Warrier, G. R., and Dhir, V. K., 2002, "Onset of Nucleate Boiling and Active Site Density During Subcooled Flow Boiling," ASME J. Heat Transfer, 124(4), pp. 717-728.
53. Kulenovic, R., Mertz, R., and Groll, M., 2002, "High Speed Flow Visualization of Pool Boiling From Structured Tubular Heat Transfer Surfaces," Exp. Therm. Fluid Sci., 25(7), pp. 547-555.
54. Zhang, J., and Manglik, R. M., 2003, "Visualization of Ebullient Dynamics in Aqueous Surfactant Solutions," ASME J. Heat Transfer, 125(4), p. 547.
55. Zhang, J., and Manglik, R. M., 2004, "Effect of Ethoxylation and Molecular Weight of Cationic Surfactants on Nucleate Boiling in Aqueous Solutions," ASME J. Heat Transfer, 126(1), pp. 34-42.
56. Zhang, J., and Manglik, R. M., 2005, "Nucleate Pool Boiling of Aqueous Polymer Solutions on a Cylindrical Heater," J. Non-Newtonian Fluid Mech., 125(2-3), pp. 185-196.
57. Chen, Y., Groll, M., Mertz, R., and Kulenovic, R., 2005, "Visualization and Mechanisms of Pool Boiling of Propane, Isubutane, and Their Mixtures on Enhanced Tubes With Reentrant Channels," Int. J. Heat Mass Transfer, 48(12), pp. 2516-2528.
58. Siedel, S., Cioulachtjian, S., and Bonjour, J., 2008, "Experimental Analysis of Bubble Growth, Departure, and Interactions During Pool Boiling on Artificial Nucleation Sites," Exp. Therm. Fluid Sci., 32(8), pp. 1504-1511.
59. Nishikawa, K., 1987, "Historical Developments in the Research of Boiling Heat Transfer," JSME Int. J., 30(264), pp. 897-905.
60. Judd, R. L., and Hwang, K. S., 1976, "A Comprehensive Model for Nucleate Heat Transfer Including Microlayer Evaporation," ASME J. Heat Transfer, 98, pp. 623-629.
61. Mikiç, B. B., and Rohsenow, W. M., 1969, "A New Correlation of Pool-Boiling Data Including Effect of Heating Surface Characteristics," ASME J. Heat Transfer, 9(2), pp. 245-250.
62. Athavale, A., and Manglik, R. M., 2009, "Experiments in Pool Boiling From a Horizontal Cylindrical Heater in Water and Polymeric Aqueous Solutions," University of Cincinnati Report No. TFTPL-09-PR.
63. Cooper, M. G., 1984, "Heat Flow Rates in Saturated Nucleate Pool Boiling-A Wide-Ranging Examination Using Reduced Properties," Advances in Heat Transfer, Vol. 16, J. P. Hartnett, and T. F Irvines, Jr., eds., Academic, New York, pp. 157-239.
64. Cooper, M. G., 1984, "Saturated Nucleate Pool Boiling-A Simple Correlation," First UK National Conference on Heat Transfer, Vol. 2, Institute of Chemical Engineers, University of Leeds, UK, pp. 785-793.
65. Vachon, R. I., Nix, G. H., and Tanger, G. E., 1968, "Evaluation of Constants for the Rohsenow Pool-Boiling Correlation," ASME J. Heat Transfer, 90(2), pp. 239-247.
66. Pioro, I. L., 1999, "Experimental Evaluation of Constants for the Rohsenow Pool Boiling Correlation," Int. J. Heat Mass Transfer, 42(11), pp. 2003-2013.
67. Pioro, I. L., Rohsenow, W., and Doerffer, S. S., 2004, "Nucleate Pool-Boiling Heat Transfer. I: Review of Parametric Effects of Boiling Surface," Int. J. Heat Mass Transfer, 47(23), pp. 5033-5044.
68. Pioro, I. L., Rohsenow, W., and Doerffer, S. S., 2004, "Nucleate Pool-Boiling Heat Transfer. II: Assessment of Prediction Methods," Int. J. Heat Mass Transfer, 47(23), pp. 5045-5057.
69. Hahne, E., and Barthau, G., 2006, "Heat Transfer and Nucleation in Pool-Boiling," Int. J. Therm. Sci., 45(3), pp. 209-216.
70. Danilova, G. N., and Kupriyanova, A. V., 1970, "Boiling Heat Transfer to Freons C318 and 21," Heat Transfer-Sov. Res., 2(2), pp. 79-83.
71. Nishikawa, K., Fujita, Y., Ohta, H., and Hidaka, S., 1979, "Heat Transfer in Nucleate Boiling of Freon," Heat Transfer-Jpn. Res., 8(3), pp. 16-36.
72. Nishikawa, K., Fujita, Y., Ohta, H., and Hidaka, S., 1982, "Effects of System Pressure and Surface Roughness on Nucleate Boiling Heat Transfer," Memoirs of the Faculty of Engineering, Kyushu University, 42(2), pp. 95-123.
73. Marto, P. J., Moulson, J. A., and Maynard, M. D., 1968, "Nucleate Pool Boiling of Nitrogen With Different Surface Conditions," ASME J. Heat Transfer, 90(4), pp. 437 444.
74. Singh, A., Mikiç, B. B., and Rohsenow, W. M., 1976, "Active Sites in Boiling," ASME J. Heat Transfer, 98(3), pp. 401-406.
75. Fong, R. W. L., McRae, G. A., Coleman, C. E., Nitheanandan, T., and Sanderson, D. B., 2001, "Correlation Between the Critical Heat Flux and the Fractal Surface Roughness of Zirconium Alloy Tubes," J. Enhanced Heat Transfer, 8(2), pp. 137-146.
76. Tsujii, K., 1998, Surface Activity, Academic, San Diego, CA.
77. Bergles, A. E., 1999, "Enhanced Heat Transfer: Endless Frontier, or Mature and Routine?," J. Enhanced Heat Transfer, 6(2-4), pp. 79-88.
78. Bergles, A. E., 2001, "The Implications and Challenges of Enhanced Heat Transfer for the Chemical Process Industries," Chem. Eng. Res. Des., 79(4), pp. 437-444.
79. Manglik, R. M., and Manglik, A., 2009, "Energy Consumption, Economic Efficiency, and Fourth-Generation Technological Innovation for a Sustainable Future," Thermal-Fluids & Thermal Processing Laboratory Report No. TFTPL-EP-09, University of Cincinnati, Cincinnati, OH.
80. Bergles, A. E., 2003, "High-Flux Processes Through Enhanced Heat Transfer," Rohsenow Symposium, Massachusetts Institute of Technology, Cambridge, MA.
81. Nakayama, W., and Bergles, A. E., 1990, "Cooling Electronic Equipment: Past, Present and Future," Heat Transfer in Electronic and Microelectronic Equipment, A. E. Bergles, ed., Hemisphere, New York, pp. 3-39.
82. Kandlikar, S. G., 2001, "Critical Heat Flux in Subcooled Flow Boiling-An Assessment of Current Understanding and Future Directions for Research," Multiphase Sci. Technol., 13(3), pp. 207-232.
83. Bergles, A. E., 1963, "Subcooled Burnout in Tubes of Small Diameter," ASME Paper No. WAM 63-WA-182.
84. Vandervort, C. L., Bergles, A. E., and Jensen, M. K., 1994, "An Experimental Study of Critical Heat Flux in Very High Heat Flux Subcooled Boiling," Int. J. Heat Mass Transfer, 37, pp. 161-173.
85. Manglik, R. M., and Bergles, A. E., 2002, "Swirl Flow Heat Transfer and Pressure Drop With Twisted-Tape Inserts," Advances in Heat Transfer, Vol. 36, J. P. Hartnett, T. F. Irvine, Jr., Y. I. Cho, and G. A. Greene, eds., Academic, San Diego, CA, pp. 183-266.
86. Chang, S. H., and Baek, W.-P., 2003, "Understanding, Predicting, and Enhancing Critical Heat Flux," Proceedings of the Tenth International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-10), Seoul, Korea, pp. 1-20.
87. Worthington, A. M., 1876, "On the Forms Assumed by Drops of Liquid Falling Vertically on a Horizontal Plate," Proc. R. Soc. London, 25, pp. 261-272.
88. Worthington, A. M., 1877, "A Second Paper on the Forms Assumed by Drops of Liquid Falling Vertically on a Horizontal Plate," Proc. R. Soc. London, 25, pp. 498-503.
89. Asai, A., Shioya, M., Hirasawa, S., and Okazaki, T., 1993, "Impact of an Ink Drop on Paper," J. Imaging Sci. Technol., 37(2), pp. 205-207.
90. Rioboo, R., Marengo, M., and Tropea, C., 2001, "Outcomes From a Drop Impact on Solid Surfaces," Atomization Sprays, 11, pp. 155-165.
91. Rioboo, R., Marengo, M., and Tropea, C., 2002, "Time Evolution of Droplet Impact Onto Solid, Dry Surfaces," Exp. Fluids, 33, pp. 12-24.
92. Roisman, I. V., Rioboo, R., and Tropea, C., 2002, "Normal Impact of a Liquid Drop on a Dry Surface: Model for Spreading and Receding," Proc. R. Soc. London, A458, pp. 1411-1430.
93. Gatne, K. P., 2006, "Experimental Investigation of Droplet Impact Dynamics on Solid Surfaces," MS thesis, University of Cincinnati, Cincinnati, OH.
94. Gatne, K. P., Manglik, R. M., and Jog, M. A., 2007, "Visualization of Fracture Dynamics of Droplet Recoil on Hydrophobic Surface," ASME J. Heat Transfer, 129(8), p. 931.
95. Gatne, K. P., Jog, M. A., and Manglik, R. M., 2009, "Surfactant-Inducted Modification of Low Weber Number Droplet Impact Dynamics," Langmuir, 25(14), pp. 8122-8130.
96. Sikalo, S., Wilhelm, H. D., Roisman, I. V., Jakirlic, S., and Tropea, C., 2005, "Dynamic Contact Angle of Spreading Droplets: Experiments and Simulations," Phys. Fluids, 17(6), p. 062103.
97. Jones, H., 1971, "Cooling, Freezing, and Substrate Impact of Drops Formed by Rotary Atomization," J. Phys. D, 4, pp. 1657-1660.
98. Madejski, J., 1976, "Solidification of Droplets on a Cold Surface," Int. J. Heat Mass Transfer, 19, pp. 1009-1013.
99. Wang, G. X., and Matthys, E. F., 1991, "Modeling of Heat Transfer and Solidification During Splat Cooling: Effect of the Splat Thickness and Splat/Substrate Thermal Contact," Int. J. Rapid Solidif., 6, pp. 141-174.
100. Bennett, T., and Poulikakos, D., 1993, "Splat-Quench Solidification: Estimating the Maximum Spreading of a Droplet Impacting a Solid Surface," J. Mater. Sci., 28, pp. 963-970.
101. Zhao, Z., and Poulikakos, D., 1996, "Heat Transfer and Fluid Dynamics During the Collision of a Liquid Droplet on a Substrate-I. Modeling," Int. J. Heat Mass Transfer, 39, pp. 2771-2789.
102. Zhao, Z., and Poulikakos, D., 1996, "Heat Transfer and Fluid Dynamics During the Collision of a Liquid Droplet on a Substrate-II. Experiments," Int. J. Heat Mass Transfer, 39, pp. 2791-2802.
103. Bernardin, J. D., Stebbins, C. J., and Mudawar, I., 1997, "Mapping of Impact and Heat Transfer Regimes of Water Drops Impinging on a Polished Surface," Int. J. Heat Mass Transfer, 40(2), pp. 247-267.
104. Bernardin, J. D., Stebbins, C. J., and Mudawar, I., 1997, "Effects of Surface Roughness on Water Droplet Impact History and Heat Transfer Regimes," Int. J. Heat Mass Transfer, 40(1), pp. 73-88.
105. Ge, Y., and Fan, L. S., 2006, "3-D Modeling of the Dynamics and Heat Transfer Characteristics of Subcooled Droplet Impact on a Surface With Film Boiling," Int. J. Heat Mass Transfer, 49, pp. 4231-4249.
106. Mehdizadeh, N. Z., and Chandra, S., 2006, "Boiling During High-Velocity Impact of Water Droplets on a Hot Stainless Steel Surface," Proc. R. Soc. London, Ser. A, 462, pp. 3115-3131.
107. Akhtar, S. W., Nasr, G. G., and Yule, A. J., 2007, "Characteristics of Water Droplet Impaction Behavior on a Polished Steel Heated Surface-Part II," Atomization Sprays, 17, pp. 683-729.
108. Akhtar, S. W., Nasr, G. G., and Yule, A. J., 2007, "Characteristics of Water Droplet Impaction Behavior on a Polished Steel Heated Surface-Part I," Atomization Sprays, 17, pp. 659-681.
109. Nikolopoulos, N., Theodorakakos, A., and Bergeles, G., 2007, "A Numerical Investigation of the Evaporation Process of a Liquid Droplet Impinging Onto a Hot Substrate," Int. J. Heat Mass Transfer, 50, pp. 303-319.
110. Lee, J., Kim, J., and Kiger, K. T., 2001, "Time-and Space-Resolved Heat Transfer Characteristics of Single Droplet Cooling Using Microscale Heater Arrays," Int. J. Heat Fluid Flow, 22, pp. 188-200.
111. Pasandideh-Fard, M., Aziz, S. D., Chandra, S., and Mostaghimi, J., 2001, "Cooling Effectiveness of a Water Drop Impinging on a Hot Surface," Int. J. Heat Fluid Flow, 22, pp. 201-210.
112. Manzello, S. L., and Yang, J. C., 2004, "An Experimental Investigation of Water Droplet Impingement on a Heated Wax Surface," Int. J. Heat Mass Transfer, 47, pp. 1701-1709.
113. Tarozzi, L., Muscio, A., and Tartarini, P., 2007, "Experimental Tests of Dropwise Cooling on Infrared-Transparent Media," Exp. Therm. Fluid Sci., 31, pp. 857-865.
114. Landero, J. C., and Watkins, A. P., 2008, "Modeling of Steady-State Heat Transfer in a Water Spray Impingement Onto a Heated Wall," Atomization Sprays, 18, pp. 1-47.
115. Fukai, J., Shiiba, Y., Yamamoto, T., Miyatake, O., Poulikakos, D., Megaridis, C. M., and Zhao, Z., 1995, "Wetting Effects on the Spreading of a Liquid Droplet Colliding With a Flat Surface: Experiment and Modeling," Phys. Fluids, 7, pp. 236-247.
116. Gunjal, P. R., Ranade, V. V., and Chaudhari, R. V., 2005, "Dynamics of Drop Impact on Solid Surfaces: Experiments and VOF Simulations," AIChE J., 51(1), pp. 59-79.
117. Manservisi, S., and Scardovelli, R., 2009, "A Variational Approach to the Contact Angle Dynamics of Spreading Droplets," Comput. Fluids, 38, pp. 406-424.
118. Lunkad, S. F., Buwa, V. V., and Nigam, K. D. P., 2007, "Numerical Simulations of Drop Impact and Spreading on Horizontal and Inclined Surfaces," Chem. Eng. Sci., 62(24), pp. 7214-7224.
119. Sanjeev, A., 2008, "Computational Study of Surfactant-Induced Modification of Droplet Impact Dynamics and Heat Transfer on Hydrophobic and Hydrophilic Surfaces," MS thesis, University of Cincinnati, Cincinnati, OH.
120. Jiang, T., Oh, S., and Slattery, J. C., 1979, "Correlation for Dynamic Contact Angle," J. Colloid Interface Sci., 69, pp. 74-77.
121. Cox, R. G., 1986, "The Dynamics of the Spreading of Liquids on a Solid Surface. Part 1. Viscous Flow," J. Fluid Mech., 168, pp. 169-194.
122. Blake, T. D., 1993, "Dynamic Contact Angles and Wetting Kinetics," Wettability, J. C. Berg, ed., Marcel Dekker, New York, pp. 251-310.
123. Blake, T. D., Bracke, M., and Shikhmurzaev, Y. D., 1999, "Experimental Evidence of Nonlocal Hydrodynamic Influence on the Dynamic Contact Angle," Phys. Fluids, 11, pp. 1995-2007.
124. Martin-Callizo, C., Palm, B., Owhaib, W., and Ali, R., 2010, "Flow Boiling Visualization of R-134a in a Vertical Channel of Small Diameter," ASME J. Heat Transfer, 132, to be published.
125. Fogg, D., and Goodson, K. E., 2009, "Bubble-Induced Water Hammer and Cavitation in Microchannel Flow Boiling," ASME J. Heat Transfer, 131(12), p. 121006.
126. Tanaka, F., Hibishi, T., and Mishima, K., 2009, "Correlation for Flow Boiling Critical Heat Flux in Thin Rectangular Channels," ASME J. Heat Transfer, 131(12), p. 121003.
127. Kuo, C. J., and Peles, Y., 2009, "Flow Boiling of Coolant (HFE-7000) Inside Structured and Plain Wall Microchannels," ASME J. Heat Transfer, 131(12), p. 121011.
128. Nam, Y., Wu, J., Warrier, G., and Ju, Y. S., 2009, "Experimental and Numerical Study of Single Bubble Dynamics on a Hydrophobic Surface," ASME J. Heat Transfer, 131(12), p. 121004.
129. Jones, B. J., McHale, J. P., and Garimella, S. V., 2009, "The Influence of Surface Roughness on Nucleate Pool Boiling Heat Transfer," ASME J. Heat Transfer, 131(12), p. 121009.
130. Xu, J., Zhang, Y., and Ma, H., 2009, "Effect of Internal Wick Structure on Liquid-Vapor Oscillatory Flow and Heat Transfer in an Oscillating Heat Pipe," ASME J. Heat Transfer, 131(12), p. 121012.
131. Zhao, C. Y., Lu, W., and Tassou, S. A., 2009, "Flow Boiling Heat Transfer in Horizontal Metal-Foam Tubes," ASME J. Heat Transfer, 131(12), p. 121002.
132. Wu, W., Jones, B. G., and Newell, T. A., 2009, "A Statistical Model of Bubble Coalescence and Its Application to Boiling Heat Flux Prediction-Part I: Model Development," ASME J. Heat Transfer, 131(12), p. 121013.
133. Wu, W., Jones, B. G., and Newell, T. A., 2009, "A Statistical Model of Bubble Coalescence and Its Application to Boiling Heat Flux Prediction-Part II: Experimental Validation," ASME J. Heat Transfer, 131(12), p. 121014.
134. Arias, F. J., 2009, "Magnetohydrodynamic Correction in Film Boiling Heat Transfer on Liquid Metal in Presence of an Ideal Magnetic Field With Particular Reference to Fusion Reactor Project," ASME J. Heat Transfer, 131(12), p. 124501.
135. Tipton, J. B., Jr., Kihm, K. D., and Pratt, D. M., 2009, "Modeling Alkaline Liquid Metal (Na) Evaporating Thin Films Using Both Retarded Dispersion and Electronic Force Components," ASME J. Heat Transfer, 131(12), p. 121015.
136. Wagner, E., and Stephan, P., 2009, "High Resolution Measurements at Nucleate Boiling of Pure FC-84 and FC-3284 and Its Binary Mixtures," ASME J. Heat Transfer, 131(12), p. 121008.
137. Haustein, H. D., Gany, A., and Elias, E., 2009, "Rapid Boiling of a Two-Phase Droplet in an Immiscible Liquid at High Superheat," ASME J. Heat Transfer, 131(12), p. 121010.
138. Hollingsworth, D. K., Witte, L. C., and Figueroa, M., 2009, "Enhancement of Heat Transfer Behind Sliding Bubbles," ASME J. Heat Transfer, 131(12), p. 121005.
139. Sarkar, S., and Selvam, R. P., 2009, "Direct Numerical Simulation of Heat Transfer in Spray Cooling Through 3D Multiphase Flow Modeling Using Parallel Computing," ASME J. Heat Transfer, 131(12), p. 121007.
140. Takata, Y., Hidaka, S., Masuda, M., and Ito, T., 2003, "Pool Boiling on a Superhydrophilic Surface," Int. J. Energy Res., 27(2), pp. 111-119.
141. Zhang, J., and Manglik, R. M., 2005, "Additive Adsorption and Interfacial Characteristics of Nucleate Pool Boiling in Aqueous Surfactant Solutions," ASME J. Heat Transfer, 127(7), pp. 684-691.
142. Rioboo, R., Marengo, M., Dall'Olio, S., Voue, M., and De Coninck, J., 2009, "An Innovative Method to Control the Incipient Flow Boiling Through Grafted Surfaces With Chemical Patterns," Langmuir, 25(11), pp. 6005-6009.
143. Choi, C.-H., and Kim, C.-J., 2009, "Droplet Evaporation of Pure Water and Protein Solution on Nanostructured Superhydrophobic Surfaces of Varying Heights," Langmuir, 25(13), pp. 7561-7567.
144. Chang, C.-H., and Franses, E. I., 1995, "Adsorption Dynamics of Surfactants at the Air/Water Interface: A Critical Review of Mathematical Models, Data, and Mechanisms," Colloids Surf., A, 100, pp. 1-45.
145. Mourougou-Candoni, N., Prunet-Foch, B., Legay, F., Vignes-Alder, M., and Wong, K., 1997, "Influence of Dynamic Surface Tension on the Spreading of Surfactant Solution Droplets Impacting Onto a Low-Surface-Energy Solid Substrate," J. Colloid Interface Sci., 192, pp. 129-141.
146. Zhang, X., and Basaran, O. A., 1997, "Dynamic Surface Tension Effects in Impact of a Drop With a Solid Surface," J. Colloid Interface Sci., 187, pp. 166-178.
147. Bergeron, V., Bonn, D., Martin, J. Y., and Vovelle, L., 2000, "Controlling Droplet Deposition With Polymer Additives," Nature (London), 405, pp. 772-775.
148. Crooks, R., Cooper-White, J., and Boger, D. V., 2001, "The Role of Dynamic Surface Tension and Elasticity on the Dynamics of Drop Impact," Chem. Eng. Sci., 56, pp. 5575-5592.
149. Bertola, V., 2004, "Drop Impact on a Hot Surface: Effect of a Polymer Additive," Exp. Fluids, 37, pp. 653-664.
150. Cooper-White, J. J., Crooks, R. C., and Boger, D. V., 2002, "A Drop Impact Study of Worm-Like Viscoelastic Surfactant Solutions," Colloids Surf., A, 210, pp. 105-123.
151. Lampe, J., DiLalla, R., Grimaldi, J., and Rothstein, J. P., 2005, "Impact Dynamics of Drops on Thin Films of Viscoelastic Wormlike Micelle Solutions," J. Non-Newtonian Fluid Mech., 125, pp. 11-23.
152. Ariyo, A., 2009, "Experimental Investigation of an Aqueous Polymer Solution Drop Impinging on a Solid Substrate," MS thesis, University of Cincinnati, Cincinnati, OH.
153. Ariyo, A., Jog, M. A., and Manglik, R. M., 2009, "Droplet Impact Dynamics of Aqueous Polymeric Solutions," Proceedings of the 11th Triennial International Conference on Liquid Atomization and Spray Systems (ICLASS 2009), Vail, CO, Paper No. ICLASS 2009-0066.
154. Jung, Y. C., and Bhushan, B., 2008, "Dynamic Effects of Bouncing Water Droplets on Superhydrophobic Surfaces," Langmuir, 24(12), pp. 6262-6269.
155. Patankar, N. A., 2004, "Mimicking the Lotus Effect: Influence of Double Roughness Structures and Slender Pillars," Langmuir, 20(19), pp. 8209-8213.
156. Spori, D. M., Drobek, T., Zürcher, S., Ochsner, M., Sprecher, C., Mühlebach, A., and Spencer, N. D., 2008, "Beyond the Lotus Effect: Roughness Influence on Wetting Over a Wide Surface-Energy Range," Langmuir, 24(10), pp. 5411-5417.
157. Zhang, J., Sheng, X., and Jiang, L., 2009, "The Dewetting Properties of Lotus Leaves," Langmuir, 25(3), pp. 1371-1376.
158. Chen, H.-B., Zhou, Y., Yin, J., Yan, J., Ma, Y., Wang, L., Cao, Y., Wang, J., and Pei, J., 2009, "Single Organic Microtwist With Tunable Pitch," Langmuir, 25(10), pp. 5459-5462.
159. Santayana, G., 1905, The Life of Reason, or The Phases of Human Progress, Vol. 1, C. Scribner's Sons, New York.
160. 1998, The Life of Reason, or The Phases of Human Progress, republished by Prometheus Books, Amherst, NY.
161. Bergles, A. E., 1981, "Two-Phase Flow and Heat Transfer," Heat Transfer Eng., 2(3-4), pp. 101-114.
162. Allchin, F. R., 1979, "India: The Ancient Home of Distillation?" Man, New Series, 14(1), pp. 55-63.
163. Craddock, P. T., 1987, "The Early History of Zinc," Endeavour, 11(4), pp. 183-191.
164. Despande, V., 1996, "A Note on Ancient Zinc-Smelting in India and China," Indian J. Hist. Sci., 31(3), pp. 276-279.
165. Pothula, V. B., Jones, T. M., and Lesser, T. H. J., 2001, "Otology in Ancient India," J. Laryngol. Otol., 115, pp. 179-183.
166. Dwivedi, G., and Dwivedi, S., 2007, "Sushruta-The Clinician-Teacher par Excellence," Indian J. Chest Dis. Allied Sci., 49(4), pp. 243-244.
167. Natarajan, K., 2008, "Surgical Instruments and Endoscopes of Susruta, the Sage Surgeon of Ancient India," Indian J. Surg., 70(5), pp. 219-223.
168. Mahdihassan, S., 1979, "Distillation Assembly of Pottery in Ancient India With a Single Item of Special Construction," Vishveshvaranand Indological Journal, 17, pp. 264-266.
169. Mahdihassan, S., 1972, "The Earliest Distillation Units of Pottery in Indo-Pakistan," Pa. Archaeol., 8, pp. 159-168.
170. Dani, A. H., 1966, "Shaikhan Dheri Excavations, 1963 and 1964," Ancient Pakistan, 2, pp. 17-214.
171. Marshall, J., 1951, Taxila, Cambridge University Press, Cambridge, UK.
172. Oort, M. S., 2002, "Sura in the Paippalada Samhita of the Atharvaveda," J. Am. Orient. Soc., 122(2), pp. 355-360.
173. Craddock, P. T., Gurjar, L. K., and Hegde, K. T. M., 1983, "Zinc Production in Medieval India," World Archaeol., 15(2), pp. 211-217.
174. Willies, L., Craddock, P. T., Gurjar, L. J., and Hegde, K. T. M., 1984, "Ancient Lead and Zinc Mining in Rajasthan, India," World Archaeol., 16(2), pp. 222-233.