Laser-Induced Forward Transfer: An Approach to Direct Write of Patterns in Film Form

Nanomaterials: Processing and Characterization with Lasers

Volumn , Issue , 2012, Pages 219-240

  Sakata, Hironobu ^a   Wakaki, Moriaki ^a  

^a TOKAI UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84878196988     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9783527646821.ch5     Document Type: Chapter

References (37)

1. Bohandy, J., Kim, B.F., and Adrian, F.J. (1986) Metal deposition from a supported metal film using an excimer laser. J. Appl. Phys., 60 (4), 1538-1539.
2. Zergiotti, I., Koudourakis, G., Vainos, N.A., and Fotakis, C. (2002) in Direct Write Technologies for Rapid Prototyping Applications (eds A. Piqué and D.B. Chrisey), Academic Press, New York, pp. 493-516.
3. Adrian, F.J., Bohandy, J., Kim, B.F., Jette, A.N., and Thomson, P. (1987) A study of the mechanism of metal deposition by the laser-induced forward transfer process. J. Vac. Sci. Technol., B5 (5), 1490-1494.
4. Bohandy, J., Kim, B.F., Adrian, F.J., and Jette, A.N. (1988) Metal deposition at 532nm using a laser transfer technique. J. Appl. Phys., 63 (4), 1158-1162.
5. Schultze, V. and Wagner, M. (1991) Laser-induced transfer of aluminium. Appl. Surf. Sci., 52, 303-309.
6. Baseman, R.J., Froberg, N.M., Andreshak, J.C., and Schlesinger, Z. (1990) Minimum fluence for laser blow-off of thin gold films at 248 and 532nm. Appl. Phys. Lett., 56 (15), 1412-1414.
7. Kántor, Z., Thóth, Z., and Szörényi, T. (1995) Metal pattern deposition by laser-induced forward transfer. Appl. Surf. Sci., 86, 196-201.
8. Bullock, A.B., Borton, P.R., and Mayer, F.J. (1997) Time-integrated reflectivity of laser-induced back-ablated aluminum thin film targets. J. Appl. Phys., 82 (4), 1828-1831.
9. Fogarassy, E., Fuchs, C., Kerherve, F., Hauchecorne, G., and Perriere, J. (1989) Laser-induced forward transfer of high-Tc YBaCuO and BiSrCaCuO superconducting thin films. J. Appl. Phys., 66 (1), 457-459.
10. Fogarassy, E., Fuchs, C., Kerherve, F., Hauchecorne, G., and Parrière, J. (1989) Laser-induced forward transfer: a new approach for the deposition of high Tc superconducting thin films. J. Mater. Res., 4 (5), 1082-1086.
11. Lätsch, S., Hiraoka, H., Nieveen, W., and Bargon, J. (1994) Interface study on laser-induced material transfer from polymer and quartz surfaces. Appl. Surf. Sci., 81, 183-194.
12. Esrom, H., Zhan, J.-Y., Kolgelschatz, U., and Pedraza, A.J. (1995) New approach of a laser-induced forward transfer for deposition of patterned thin metal films. Appl. Surf. Sci., 86, 202-207.
13. Pimenov, S.M., Shafeev, G.A., Smolin, A.A., Konov, V.I., and Vodolaga, B. (1995) Laser-induced forward transfer of ultra-fine diamond particles for selective deposition of diamond films. Appl. Surf. Sci., 86, 208-212.
14. Kántor, Z., Tóth, Z., Szörényi, T., and Tóth, A.L. (1994) Deposition of micrometer-sized tungsten pattern by laser transfer technique. Appl. Phys. Lett., 64 (25), 3506-3508.
15. Zergioti, I., Mailis, S., Vainos, N.A., Papakonstantinou, P., Kalpouzos, C., Grigoropoulous, C.P., and Fotakis, C. (1998) Microdeposition of metal and oxide structures using ultrashort laser pulses. Appl. Phys., A66, 579-582.
16. Blanchet, G.B., Loo, Y.-L., Rogers, J.A., Gao, F., and Fincher, C.R. (2003) Large area, high resolution, dry printing of conducting polymers for organic electronics. Appl. Phys. Lett., 82 (3), 463-465.
17. Bähnisch, R., Groß, W., and Menschig, A. (2000) Single-shot, high repetition rate metallic pattern transfer. Microelecron. Eng., 50, 541-546.
18. Tan, B., Venkatakrishnan, K., and Tok, K.G. (2003) Selective surface texturing using femtosecond pulsed laser induced forward transfer. Appl. Surf. Sci., 207, 365-371.
19. 2-Au nanocomposite films for maskless patterning. Appl. Phys. Lett., 86 (11), 114104-1-114104-3.
20. 5 thin films. Appl. Surf. Sci., 254, 638-643.
21. Fitz-Gerald, J.M., Piqué, A., Chrisey, D.B., Rack, P.D., Zeleznik, M., Auyeung, R.C.Y., and Lakeou, S. (2004) Laser direct writing of phosphor screens for high-resolution displays. Appl. Phys. Lett., 96 (11), 3478-3481.
22. Karaikou, A., Zergioti, I., Fotakis, C., Kapsetaki, M., and Kafetzopoulos, D. (2003) Microdfabrication of biomaterials by the sub-ps laser-induced forward transfer process. Appl. Surf. Sci., 208-209, 245-249.
23. Serra, P., Colina, M., Fernández-Pradas, J.M., Sevilla, L., and Morenza, J.L. (2004) Preparation of functional DNA microarrays through laser-induced forward transfer. Appl. Phys. Lett., 85 (9), 1639-1641.
24. Serra, P., Fernández-Pradas, J.M., Berthet, F.X., Colina, M., Elvira, J., and Morenza, J.L. (2004) Laser direct writing of biomolecule microarrays. Appl. Phys., A79, 949-952.
25. Hopp, B., Smausz, T., Antal, Zs., Kresz, N., Bor, Zs., and Chrisey, D. (2004) Absorbing film assisted laser induced forward transfer of fungi (Trichoderma conidia). J. Appl. Phys., 96 (6), 3478-3481.
26. Kántor, Z., Thóth, Z., and Szörényi, T. (1992) Laser-induced forward transfer: the effect of support-film interface and film-to-substrate distance on transfer. Appl. Phys., A54, 170-175.
27. Papakonstantinou, P., Vainos, N.A., and Fotakis, C. (1999) Microfabrication by UV femtosecond laser ablation of Pt, Cr and indium oxide thin films. Appl. Surf. Sci., 151, 159-170.
28. Alexander, D.E., Was, G.S., and Mayer, F.J. (1988) Laser-driven micro-explosive bonding of aluminium films to copper and silicon. J. Mater. Sci., 23, 2181-2186.
29. Tóth, Z., Szörényi, T., and Tóth, A.L. (1993) Ar+ laser-induced forward transfer: a novel method for micrometer-size surface patterning. Appl. Surf. Sci., 69, 317-320.
30. 3 films through sol-gel process. J. Sol-Gel Sci. Technol., 9, 145-155.
31. Sakka, S., and Kozuka, H., (1998) Sol-gel preparation of coating films containing noble metal colloids. J. Sol-Gel Sci. Technol., 13, 701-705.
32. Nagel, M., Fardel, R., Feurer, P., Häberli, M., Nüesch, F.A., Lippert, T., and Wokaun, A. (2008) Aryltriazene photopolymer thin films as sacrificial release layers for laser-assisted forward transfer systems: study of photoablative decomposition and transfer behavior. Appl. Phys., A92, 781-789.
33. Mailis, S., Zergioti, I., Koundourakis, G., Ikiades, A., Patentalaki, A., Papakonstantinou, P., Vainos, N.A., and Fotakis, C. (1999) Etching and printing of diffractive optical microstructures by a femtosecond excimer laser. Appl. Opt., 38 (11), 2301-2308.
34. Hopp, B., Smausz, T., Barna, N., Vass, Cs., Antal, Zs., Kredics, L., and Chrisey, D. (2005) Time-resolved study of absorbing film assisted laser induced forward transfer of Trichoderma longibrachiatum conidia. J. Phys. D: Appl. Phys., 38, 833-837.
35. Irie, M. (2003) 1.0W high-power small-sized Nd: Yttrium Garnet (YAG) laser optical head for a laser-induced printing system. Jpn. J. Appl. Phys., 42, 1633-1636.
36. Chrisey, D.B., Piqué, A., Fitz-Gerald, J., McGill, R.C.Y., Wu, H.D., and Duinigan, M. (2000) New approach to laser direct writing active and passive mesoscopic circuit elements. Appl. Surf. Sci., 154-155, 593-600.
37. Fitz-Gerald, J.M., Rack, P.D., Ringeisen, B., Young, D., Modi, R., Auyeung, R., and Wu, H.-D. (2002) in Direct Write Technologies for Rapid Prototyping Applications (eds A. Piqué and D.B. Chrisey), Academic Press, New York, pp. 517-553.