Effect of the combination of biobeating and NFC on the physico-mechanical properties of paper

Cellulose

Volumn 20, Issue 3, 2013, Pages 1425-1435

  Gonzalez I ^a   Vilaseca, F ^a   Alcala M ^a   Pelach M A ^a   Boufi, S ^b   Mutje P ^a  

^a UNIVERSITY OF GIRONA   (Spain)

^b Faculté des Sciences de Sfax   (Tunisia)

Author keywords

Beating; Biobeating; Bleached eucalyptus pulp; Enzymatic treatment; Nanofibrillated cellulose; Physical and mechanical properties

Indexed keywords

BIOBEATING; BLEACHED EUCALYPTUS PULPS; ENZYMATIC TREATMENTS; NANOFIBRILLATED CELLULOSE; PHYSICAL AND MECHANICAL PROPERTIES;

ENZYMES; MECHANICAL PROPERTIES; PAPERMAKING; PULP;

PULP BEATING;

BEATING; BLEACHED PULPS; CELLULOSE FIBERS; ENZYMATIC ACTIVITY; EUCALYPTUS; MECHANICAL PROPERTIES; PAPER MAKING;

EID: 84877618034     PISSN: 09690239     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10570-013-9927-1     Document Type: Article

References (38)

1. Ahola S, Österberg M, Laine J (2008) Cellulose nanofibrils-adsorption with poly(amideamine) epichlorohydrine studied by QCM-D and application as a paper strength additive. Cellulose 15: 303-314.
2. Bajpai P, Bajpai PK (1998) Deinking with enzymes: a review. Tappi J 81: 111-117.
3. Besbes I, Rei Vilar M, Boufi S (2011) Nanofibrillated cellulose from alfa, eucalyptus and pine fibers: preparation, characteristics and reinforcing potential. Carbohydr Polym 86: 1198-1206.
4. Cadena E, Chriac AI, Pastor FI, Diaz P, Vidal T, Torres AL (2010) Use of cellulases and recombinant cellulose binding domains forbeating TCF kraft pulp. Biotechnol Prog 26(4): 960-967.
5. Carrasco F, Mutjé P, Pèlach MA (1996) Beating of bleached cellulosic pulps: characterization by application of the colloidal titration technique. Wood Sci Technol 30(4): 227-236.
6. Dasgupta S (1994) Mechanism of paper tensile-strength development due to pulp beating. Tappi J 77(6): 158-164.
7. Eriksen O, Syverud K, Gregersen O (2008) The use of microfibrillated cellulose produced from kraft pulp as strength enhancer in TMP paper. Nordic Pulp Paper Res J 23(3): 299-304.
8. García O, Torres AL, Colom JF, Pastor FIJ, Díaz P, Vidal T (2002) Effect of cellulase-assisted beating on the properties of dried and never-dried Eucalyptus pulp. Cellulose 9: 115-125.
9. González I, Boufi S, Pèlach MA, Alcalà M, Vilaseca F, Mutjè P (2012) Nanofibrillated cellulose as paper additive in eucalyptus pulps. Bioresources 7(4): 5167-5180.
10. Hubbe MA, Heitmann JA (2007) Review of factors affecting the release of water from cellulosic fibers during paper manufacture. Bioresources 2: 500-533.
11. Hubbe MA, Venditti RA, Rojas OJ (2007) What happens to cellulosic fibres during papermaking and recycling? A review. Bioresources 2(4): 739-788.
12. Huber P, Carré B, Petit-Conil M (2008) The influence of TMP fibre flexibility on flocculation and formation. Bioresources 3(4): 1218-1227.
13. Hurter Consult Incorporated (2002) 100% nonwood fiber content papers-Part 3: bleached papers physical properties. http://www. hurterconsult. como/nonwood_paper_4. htm.
14. Joseleau J-P, Chevalier-Billosta V, Ruel K (2012) Interaction between microfibrillar cellulose fines and fibres: influence on pulp qualities and paper sheet properties. Cellulose 19: 769-777.
15. Kibblewhite PR, Clark TA (1996) Enzymatic modification of radiata pine kraft fibre and handsheet properties. Appita J 49: 390-396.
16. Kim HJ, Jo BM, Lee SH (2006) Potential for energy saving in beating of cellulase-treated kraft pulp. J Ind Eng Chem 12(4): 578-583.
17. Lecourt M, Meyer V, Sigoillot JC, Petit-Conil M (2010a) Energy reduction of beating by cellulases. Holzforschung 64: 441-446.
18. Lecourt M, Sigoillot JC, Petit-Conil M (2010b) Cellulase-assisted beating of chemical pulps: impact of enzymatic charge and beating intensity on energy consumption and pulp quality. Process Biochem 45: 1274-1278.
19. Lin M, Kilburn DG, Breuil C and Robertson AG (1995) Assessing changes in the specific surface area of kraft papermaking fibres with cellulase binding domain. In: 8th international symposium on wood and pulping chemistry, vol. 1, Helsinki. June 6-9, pp 645-652.
20. Lumiainen J (1998) Beating of chemical pulp. In: Paulapuro H (ed) Papermaking science and technology, book 8 papermaking part 1, stock preparation and wet end. Fapet Oy, Helsinki.
21. Lumme MS, Mansfield SD, Saddler JN (1999) The effects of hydrolytic enzyme treatments of 3 British Columbian interior fir kraft pulps differing in their initial fibre coarseness. Wood Fibre Sci 31: 385-393.
22. Mansfield SD, Dejong E, Stephens RS, Saddler JN (1997) Physical characterization of enzymatically modified kraft pulp fibres. J Biotechnol 57: 205-216.
23. Marais A, Wågberg L (2012) The use of polymeric amines to enhance the mechanical properties of lignocellulosic fibrous networks. Cellulose 19(4): 1437-1447.
24. Minor JL, Atalla RH and Harten TM (1991) Improving interfiber bonding of recycled fibers. Prod 1991 recycling forum, 115-122.
25. Molin U, Daniel G (2004) Effects of beating on the fibre structure of kraft pulps as revealed by FE-SEM and TEM: influence of alkaline degradation. Holzforschung 58: 226-232.
26. Norell M, Johansson K and Persson M (1999) Retention and drainage. In: Neimo L (ed) Papermaking science and technology, book 4: papermaking chemistry. Fapet Oy, Helsinki, Finland, pp 43-81.
27. Oksanen T, Pere J, Buchert J, Viikari L (1997) The effect of Trichoderma reesei cellulases and hemicellulases on the paper technical properties of never-dried bleached kraft pulp. Cellulose 4: 329-339.
28. Pastor FIJ, Pujol X, Blanco A, Vidal T, Torres AL, Diaz P (2001) Molecular cloning and characterization of a multi domain endoglucanase from Paenibacillus sp. BP-23. Evaluation of its performance on pulp beating. Appl Microbiol Biotechnol 55: 61-68.
29. Pere J, Siika-aho M, Buchert J, Viikari L (1995) Effect of Trichodermareesei cellulases on the fibre properties of kraft pulp. Tappi J 78: 71-78.
30. Roncero MB, Vidal T, Torres AL and Colom JF (1996) Use of xylanase in the totally chlorine free bleaching of eucalyptus kraft pulp. In: ACS symposium series no. 655: Enzymes for pulp and paper processing, pp 219-227.
31. Sehaqui H, Allais M, Zhou Q, Berglund L (2011) Wood cellulose biocomposites with fibrous structures at micro- and nanoscale. Compos Sci Technol 71: 382-387.
32. Skals PB, Krabek A, Nielsen PH, Wenzel H (2008) Environmental assessment of enzyme assisted processing in pulp and paper industry. Int J LCA 13(2): 124-132.
33. Taipale T, Österberg M, Nykänen A, Ruokolainen J, Laine J (2010) Effect of microfibrillated cellulose and fines on the drainage of kraft pulp suspension and paper strength. Cellulose 17: 1005-1020.
34. Torres AL, García O, Colom JF, Pastor FIJ, Díaz P and Roncero MAB (1999) Cellulase-assisted beating of fibres and handsheet properties. In: 27th Eucepa conference. Crossing the millennium frontier emerging technical and scientific challenges. Grenoble, October 11-14, pp 47-52.
35. Torres AL, MaB Roncero, Colom JF, Pastor FIJ, Blanco A, Vidal T (2000) Effect of a novel enzyme on fibre morphology during ECF bleaching of oxygen delignified eucalyptus kraft pulps. Bioresour Technol 74: 135-140.
36. Torres CE, Negro C, Fuente E, Blanco A (2012) Enzymatic approaches in paper industry for pulp beating and biofilm control. Appl Microbiol Biotechnol 96: 327-344.
37. Yano H, Sugiyama J, Nakagaito AN, Nogi M, Matsuura T, Hikita M, Handa K (2005) Optically transparent composites reinforced with networks of bacterial nanofibers. Adv Mater 17: 153.
38. Yoo S, Hsieh JS (2010) Enzyme-assisted preparation of fibrillated cellulose fibers and its effect on physical and mechanical properties of paper sheet composites. Ind Eng Chem Res 49(5): 2161-2168.