What happens to cellulosic fibers during papermaking and recycling? A review

BioResources

Volumn 2, Issue 4, 2007, Pages 739-788

  Hubbe, Martin A ^a   Venditti, Richard A ^a   Rojas, Orlando J ^a  

^a NORTH CAROLINA STATE UNIVERSITY   (United States)

Author keywords

Conformability; Deinking; Drying; Fiber length; Fines; Hornification; Inter fiber bonding; Paper recycling; Refining

Indexed keywords

CONFORMABILITY; FIBER LENGTH; FINES; HORNIFICATION; INTER-FIBER BONDING; PAPER RECYCLING;

DEINKING; DRYING; PAPER PRODUCTS; PAPERMAKING; REFINING;

FIBERS;

EID: 58149292158     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: None     Document Type: Review

References (294)

1. Ackermann, C., Göttsching, L., and Pakarinen, H. (2000). "Papermaking potential of recycled fiber," in L. Göttsching H. Pakarinen (eds.), Recycled Fiber and Deinking, Papermaking Sci. Technol. Ser., Fapet Oy, Helsinki, Ch. 10, 358-438.
2. Aggrebrant, L. G., and Samuelson, O. (1964). "Penetration of water-soluble polymers into cellulose fibers," J. Appl. Polymer Sci. 8(6), 2801-2812.
3. Alanko, K., Paulapuro, H., and Stenius, P. (1995). "Recyclability of thermomechanical pulp fibers," Paperi Puu 77(5), 315-317, 319, 321, 323-325, 327-328.
4. th Fundamental Research Symp, Cambridge, 1997, Baker, C. F. (ed.), Pira International, Leatherhead, Surrey, UK.
5. Allan, G. G., and Ko, Y. C. (1995). "The Microporosity of pulp. The forces influencing the intra- and inter-fiber pore structure and pore size distribution in pulp and paper," Cellulose Chem. Technol. 29(4), 479-485.
6. Andreasson, B., Forsström, J., and Wågberg, L. (2003). "The porous structure of pulp fibers with different yields and its influence on paper strength," Cellulose 10, 111-123.
7. Anon. (1981). "Water retention value (WRV)," TAPPI Useful Methods, UM 256.
8. Anon. (2000). "Water retention value (WRV)," Scandinavian Pulp, Paper and Board Testing Committee, SCAN-C 62:00.
9. Aravamuthan, R., and Greaves, J. S. (1998). "Effect of multiple recycles on wheat straw fibers," Proc. TAPPI Pulping Conference, 25-29 Oct., TAPPI Press, Atlanta, Vol. 1, 16p.
10. Aspler, J. S., Chauret, N., and Lyne, M. B. (1985). "Mechanism of self-sizing of paper," in Papermaking Raw Materials, Punton (ed.), Vol. 2, 707-727.
11. Atalla, R. H. (1977). "The full potential of native cellulose fibers," Southern Pulp and Paper Manufacturer 40(8), 12-15.
12. Atalla, R. H., Ellis, J. D., and Schroeder, L. R. (1984). "Some effects of elevated temperatures on the structure of cellulose and its transformation," J. Wood Chem. Technol. 4(4), 465-482.
13. Back, E. L. (1967). "Thermal auto-crosslinking in cellulose material," Pulp Paper Mag. Can. 68, T165-T171.
14. Back, E. L. (1978). "Discussion," in Fiber-Water Interactions in Paper-Making, Trans. Symp. Oxford, Sept. 1977, Tech. Div. British Paper and Board Ind. Fed., London, Vol. 2, 873.
15. Back, E. L., Htun, M. T., Jackson, M., and Johanson, F. (1967). "Ultrasonic measurements of the thermal softening of paper products and the influence of thermal auto-cross-linking reactions," Tappi 50(11), 542-547.
16. Back, E. L., and Klinga, L. O. (1963). "The effect of heat treatment on internal stresses and permanent dimensional changes of paper," Tappi 46(5), 284-288.
17. Backström, M., Fellers, C., and Htun, M. (1999). "Influence of kappa number and surface energy on paper-to-paper friction," Nordic Pulp Paper Res. J. 14(3), 204-208.
18. Bawden, A. D., and Kibblewhite, R. P. (1997). "Effects of multiple drying treatments on kraft fibre walls," J. Pulp Paper Sci. 23(7), J340-J346.
19. Bayer, R. (1996). "Effect of multiple recycling on selected properties of TMP and CTMP," Allg. Papier-Rundschau: APR 120(27), 739-740, 742, 744-746.
20. Bergström, L., Stemme, S., Dahlfors, T., Arwin, H., and Ödberg, L. (1999). "Spectroscopic ellipsometry characterization and estimation of the Hamaker constant of cellulose," Cellulose 6(1), 1-13.
21. Berthold, J., and Salmén, L. (1997). "Effects of mechanical and chemical treatments on the pore-size distribution in wood pulps examined by inverse size-exclusion chromatography," J. Pulp Paper Sci. 23(6), J245-J254.
22. Bhat, G. R., Heitmann, J. A., and Joyce, T. W. (1991). "Novel techniques for enhancing the strength of secondary fiber," Tappi J. 74(9), 151-157.
23. Billosta, V., Brandström, J., Cochaux, A., Joseau, J.-P., and Ruel, K. (2006). "Ultrastructural organization of the wood cell wall can explain modifications caused in fibers during the pulping process," Cellulose Chem. Technol. 40(3-4), 223-229.
24. Bobalek, J. F., and Chaturvedi, M. (1989). "The effects of recycling on the physical properties of handsheets with respect to specific wood species," Tappi J. 72(6), 123-125.
25. th ISWFPC: International Symposium on Wood, Fibre and Pulping Chemistry, May 16-19 2005, Auckland, New Zealand, Vol. 1, 407-413, 4A42.
26. Boone, S. R. (1996). "How does the use of recycled fiber affect sizing chemistry - Both internal sizing and surface or on-machine sizing?" Prog. Paper Recycling 5(2), 99-102.
27. Bouchard, J., and Douek, M. (1993). "Effects of recycling on the chemical properties of pulps," Res. Forum Recycling (2nd CPPA), 5-7 Oct., 23-29.
28. Bovin, A., Hartler, N., and Teder, A. (1973). "Changes in pulp quality due to repeated papermaking," Paper Technol. 14(10), 261-264.
29. Braitsford, S. F. (1978). "Discussion," in Fiber-Water Interactions in Paper-Making, Trans. Symp. Oxford, Sept. 1977, Tech. Div. British Paper and Board Ind. Fed., London, Vol. 2, 853.
30. Brandal, J., and Lindheim, A. (1966). "The influence of extractives in groundwood pulp on fiber bonding," Pulp Paper Mag. Can. 67(10), T431-T435.
31. Brecht, W. (1947). "Changes in paper properties due to mechanical regeneration," Papier 1(1/2), 16-21; (3/4), 60-63.
32. Brink, M. W. (1997). "Recycled fiber use vs. paper machine runnability - You can win!" Proc. TAPPI 1997 Engineering and Papermakers Conf., 51-58.
33. Byrd, M., Pawlak, J., Jameel, H., Venditti, R. A., Chang, H. M., and Park, S. (2002). "The effect of operating variables on the fractionation characteristics of a hydrocyclone," TAPPI Pulping Conf. Proc., San Diego, CA, 1398-1413.
34. Cameron, J. H., and Zwick, T. R. A. (2003). "The effect of fiber recycling on paper drying," TAPPI Spring Technical Conference and Exhibit, May 11-15 2003, Chicago, IL, United States, TAPPI Press, Atlanta, 537-548.
35. Campbell, W. B. (1947). "Academic aspects of paper stock preparation," Tech. Assoc. Papers 30(6), 177-180.
36. Campbell, W. B. (1959). "The mechanism of bonding," Tappi 42(12), 999-1001.
37. Cardwell, R. D., and Alexander, S. D. (1977). "Effects of recycling on softwood kraft pulp properties," Appita 30(4), 327-333.
38. Carlsson, G., and Lindström, T. (1984). "Hornification of cellulose fibers during wet pressing," Swensk Papperstidn. 87, R119.
39. Cao, B., Tschirner, U., and Ramaswamy, Sh. (1998). "Impact of pulp chemical composition on recycling, Tappi J. 81(12), 119-127.
40. Cao, B., Tschirner, J., and Ramaswamy, S. (1999). "Study of changes in wet-fiber flexibility and surface condition of recycled fibers," Paperi ja Puu/Paper and Timber 81(2), 117-122.
41. Cardwell, R. D., and Alexander, S. D. (1977). "Effects of recycling on softwood kraft pulp properties," Appita 30(4), 327-333.
42. Caulfield, D. F. (1994). "Ester crosslinking to improve wet performance of paper using multifunctional carboxylic acids, butanetetracarboxylic and citric acid," Tappi J. 77(3), 205-212.
43. Chakravarthi, S. N., Schroeder, L. R., Unbehend, J. E., and Ramarao, B. V. (1995). "Changes in TMP on recycling," Progress in Paper Recycling 4(2), 62-75.
44. Chatterjee, A., Lee, J., Roy, D. N., and Whiting, P. (1991). "Effects of recycling on the surface characteristics of paper," Proc. TAPPI Intl. Paper Physics Conf., Kona, HI, TAPPI Press, Atlanta, Book 1, 129-142.
45. Choi, Y.-S., and Won, J. M. (2001). "Improvement of papermaking properties of recycled fiber with enzyme," Palpu Chongi Gisul/Journal of Korea Technical Association of the Pulp and Paper Industry 33(1), 30-37.
46. Cildir, H., and Howarth, P. (1972). "The effect of re-use on paper strength," Paper Technol. 13(10), 333-335.
47. Claesson, P. M., Dedinaite, A., and Rojas, O. J. (2003). "Polyelectrolytes as adhesion modifiers," Advances in Colloid and Interface Science 104, 53-74.
48. Clark, J. d'A. (1985). "Bonding of cellulose surfaces," in Pulp Technology and Treatment for Paper, 2nd Ed., Miller Freeman, San Francisco, Ch. 7, pp. 145-159.
49. Cullinan, H. T. (1992). "Age distribution of recycled fiber," Appita J. 45(1), 6-8.
50. De Ruvo, A., and Htun, M. (1983). "Fundamental and practical aspects of paper-making with recycled fibers," in The Role of Fundamental Research in Paper Making, J. Brander (ed.), Mechanical Engineering Pub., Ltd., London, Vol. 1, 195-225.
51. Diniz, J. M. B. F., Gil, M. H., and Castro, J. A. A. M. (2004). "Hornification - Its origin and interpretation in wood pulps," Wood Sci. Technol. 37(6), 489-494.
52. Douek, M., Sithole, B., and Banerjee, S. (2003). "Survey of deposits and contaminants in mills using recycled fiber," Prog. Paper Recycling 13(1), 12-22.
53. D'Souza, V. A., Hand, V. C., and Schaefer, R. L. (1998). "Concentration of metals entering and leaving a recycled paper deinking mill," Prog. Paper Recycling 7(3), 22-32.
54. Dulemba, M., Qi, D., and Aravamuthan, R. (1999). "The effect of repeated drying and wetting on single fiber flexibility," Prog. Paper Recycling 9(1), 38-45.
55. Eastwood, F. G., and Carke, B. (1978). "Handsheet and pilot machine recycling degradation mechanisms," in Fiber-Water Interactions in Paper-Making, Trans. Symp. Oxford, Sept. 1977, Tech. Div. British Paper and Board Ind. Fed., London, Vol. 2, 835-855.
56. Eichinger, R. (1981). "Strength potential of recycled paper pulp," Wochenbl. Papierfabr. 109(18), 682-685.
57. Ehrnrooth, E., Htun, M., and de Ruvo, A. (1977). "Esterification as a means of improving the properties of once-dried fibers," in Fiber-Water Interactions in Papermaking, Trans. BPBIF Symp., Oxford, 899-915.
58. Ekevåg, Lindström, T., Gellerstedt, G., and Lindström, M. (2004). "Addition of carboxymethylcellulose to the kraft cook," Nordic Pulp Paper Res. J. 19(2), 200-207.
59. Eklund, D., and Lindström, T. (1991) Paper Chemistry, DT Paper Science Publ., Grankulla, Finland.
60. Ellis, R. L., and Sendlachek, K. M. (1993). "Recycled versus virgin-fiber characteristics: A comparison," in Secondary Fiber Recycling, R. J. Spangenberg (ed.), TAPPI Press, Atlanta, GA, Ch. 2, 7-19.
61. Emsley, A. M., Heywood, R. J., Ali, M., and Eley, C. M. (1997). "On the kinetics of degradation of cellulose," Cellulose 4, 1-5.
62. Eriksson, L. A.., Heitmann, J. A., and Venditti, R. A. (1998). "Freeness improvement of recycled fibers using enzymes with refining," Proceedings of the 1997 ACS Symposium, Apr 13-17 1997, San Francisco, CA, USA, 41-54.
63. Eriksson M., Torgnysdøtter A., and Wågberg, L. (2006). "Surface modification of wood fibers using the polyelectrolyte multilayer technique: Effects on fiber joint and paper strength properties," Industrial & Engineering Chemistry Research 45 (15), 5279-5286.
64. Etzler, F. M., Buche, M., Bobalek, J. F., and Weiss, M. A. (1995). "Surface free energy of paper and inks: Printability issues," Proc. TAPPI 1995 Papermakers Conf., TAPPI Press, Atlanta, 383-394.
65. Fahmy, Y., and Mobarak, F. (1971). "On fine structure of cellulose fibers," Svensk Papperstidn. 74(1), 2-9.
66. Fan, L. T., Lee, Y.-H., and Beardmore, D. H. (1980). "Mechanisms of the enzymatic hydrolysis of cellulose: Effects of major structural features of cellulose on enzymatic hydrolysis," Biotechnol. Bioeng. 22(1), 177-199.
67. Felix, J. M., and Gatenholm, P. (1993). "Characterization of cellulosic fibers using inverse gas chromatography," Nordic Pulp Paper Res. J. 8(1), 200-203.
68. Ferguson, L. D. (1992a). "Effects of recycling on [mechanical RFP] strength properties," Paper Technol. 33(10), 14-20.
69. Ferguson, L. D. (1992b). "Deinking chemistry: Parts 1, 2," Tappi J. 75(7), 75-83; (8), 49-58.
70. Ferguson, L. D. (1994). "Effects of recycling on the strength properties of paper," Wochenbl. Papierfabr. 122(4), 132-138.
71. Fjerdingen, H., and Houen, P. J. (1997). "On the effect of recycling of kraft paper on selected fines properties," Recycling Symp., TAPPI Press, Atlanta, 299-311.
72. Forester, W. K. (1985). "Recycling of neutrally sized calcium carbonate filled paper," Proc. TAPPI 1985 Pulping Conf., TAPPI Press, Atlanta, 141-144.
73. Fors, C. (2000). The Effect of Fiber Charge on Web Consolidation in Papermaking, Licentiate Thesis, Royal Inst. of Technology, Stockholm.
74. Gallay, W. (1950). "The measurement and significance of swelling of cellulose fibers," Tappi 33(9), 425-429.
75. Garg, M., and Singh, S. P. (2004). "Recycling potential of bagasse and wheat straw pulps," Tappi J. 3(9), 25-31.
76. Garg, M., and Singh, S. P. (2006). "Reasons of strength loss in recycled pulp," Appita J. 59(4), 274-279.
77. Garvin, S. P., Jr., and Pantaleo, P. F. (1976). "Measurements and evaluation of dryer section performance," Proc. TAPPI Engineering Conf., TAPPI Press, Atlanta, Book 2, 125-133.
78. th Annual Pulp and Paper Conference), November 6-10, 1995, Sao Paulo, Brazilian Pulp and Paper Technical Association (ABTCP), 343-357.
79. Gerspach, W., Luo, C., and Göttsching, L. (1993). "Modeling of the age distribution of fibers in recycling systems," Papier 47(6), 288-299.
80. Göttsching, L. (1995). "Raw materials for papermaking," in The First EcoPaperTech, Helsinki, Finland, June 6-9, 1995, The Finnish Pulp and Paper Res. Inst.
81. Göttsching, L., and Pakarinen, H. (2000). Recycled Fiber and Deinking, Papermaking Science and Technology Ser., No. 7, Fapet Oy, Helsinki.
82. Göttsching, L., and Stürmer, L. (1978a). "Physical properties of secondary fibers under the influence of their previous history, Part 1: Secondary fiber pulp in the context of technology and research" Wochenbl. Papierfabr. 106(21), 801-808.
83. Göttsching, L., and Stürmer, L. (1978b). "Physical properties of secondary fibers under the influence of their previous history. Part 2: Influence of multiple recycling," Wochenbl. Papierfabr. 106(23/24), 909-918.
84. Göttsching, L., and Stürmer, L. (1978c). "The effect of calendaring and supercalendering on the properties of secondary fibers," in Fiber-Water Interactions in Paper-Making, Trans. Symp. Oxford, Sept. 1977, Tech. Div. British Paper and Board Ind. Fed., London, Vol. 2, 877-897.
85. Grau, U., Schuhmacher, R., and Kleemann, S. (1996). "Effect of recycling and the performance of dry-strength agents," Wochenbl. Papierfabr. 124(17), 729-735.
86. Gregersen, Ø. W., Skinnarland, I., Johnsen, P. O., and Helle, T. (1995). "Qualitative methods for the study of lignin distribution in wood and surface layers of unbleached pulp fibers and paper," J. Pulp Paper Sci. 21(8), J285-J287.
87. Gruber, E., Großmann, and Schempp, W. (1996). "Interactions of synthetic cationic polymers with fibers and fillers. Part 1. The Effect of Adsorption," Wochenbl. Papierfabr. 124(1), 4-6,8,10-11.
88. Gruber, E., and Weigert, J. (1998). "Chemical modification of pulp to reduce its hornification tendency," Papier 52(Suppl. 10A), V20-V26.
89. Guest, D. A., and Voss, G. P. (1983). "Improving the quality of recycled fiber," Paper Technol. Ind. 24(7), 256-260, 268.
90. Guest, D., and Weston, J. (1990). "I dried my fibers yesterday, now I can't do nothin' with 'em," in Recycling Paper, from Fiber to Finished Product, TAPPI Press, Vol. 1, 169-175.
91. Gullichsen, J., and Fogelholm, C.-J. (eds.) (1999). Chemical Pulping, Papermaking Science and Technology ser., No. 6, Fapet Oy, Helsinki.
92. Gurnagul, N. (1995). "Sodium hydroxide addition during recycling: Effects on fiber swelling and sheet strength," Tappi J. 78(12), 119-124.
93. Gurnagul, N., Ju, S., and Page, D. H. (2001). "Fiber-fiber bond strength of once-dried pulps," J. Pulp Paper Sci. 27(3), 88-91.
94. Haggkvist, M., Li, T. Q., and Ödberg, L. (1998). "Effects of drying and pressing on the pore structure in the cellulose fiber wall studied by H-1 and H-2 NMR relaxation," Cellulose 5(1), 33-49.
95. Hartler, N. (1995). "Aspects on curled and microcompressed fibers," Nordic Pulp Paper Res. J. 10(1), 4-7.
96. Hatakeyama, H., and Hatakeyama, T. (1981). "Structural change of amorphous cellulose by water treatment and heat treatment," Makromol. Chem. 182(6), 1655-1668.
97. Hattula, T. (1986). "Crystallization and disordering of wood cellulose during hydrothermal treatment," Paperi Puu 68(11), 847-850.
98. Hawes, J. M., and Doshi, M. R. (1993). "Contribution of different types of fines to the properties of handsheets made from recycled paper," Prog. Paper Recycling 3(1), 96-105.
99. Haynes, R. D., and Röring, A. (1998). "Pulper chemistry: The key to improved deinking in North America," Proc. TAPPI 1998 Recycling Symp., 29-37.
100. Higgins, H. G., and McKenzie, A. W. (1963). "The structure and properties of paper. XIV. Effects of drying on cellulose fibers and the problem of maintaining pulp strength," Appita 16(6), 145-164.
101. Hipple, B. (1991). "Fine paper properties and the effects of wet-end starch when using deinked recycled fiber in an alkaline system," Tappi J. 74(5), 79-84.
102. Herrington, T. M., and Petzold, J. C. (1992). "An investigation into the nature of charge on the surface of papermaking woodpulps. 2. Analysis of potentiometric titration data," Colloids Surf. 64(2), 109-118.
103. Horn, R. A. (1975). "What are the effects of recycling on fiber and paper properties?" Paper Trade J. 159(7/8), 78-82.
104. Horn, R A. (1995). "What are the effects of recycling on fiber and paper properties?" Prog. Paper Recycling 4(2), 76-82.
105. th International Mechanical Pulping Conference 1993: Proceedings, Oslo, Norway, Eucepa, 350-372.
106. Howard, R. C. (1990). "The effects of recycling on paper quality," J. Pulp Paper Sci. 16(5), J143-J149.
107. Howard, R. C. (1995). "The effects of recycling on pulp quality," in Technology of Paper Recycling, R. W. J. McKinney (ed.), Blackie Academic, London, Ch. 6, 180-203.
108. Howard, R. C., and Bichard, W. (1992). "The basic effects of recycling on pulp properties," J. Pulp Paper Sci. 18(4), J151-J159.
109. Howarth, P., and Pycraft, C. J. H. (1978). "Discussion," in Fiber-Water Interactions in Paper-Making, Trans. Symp. Oxford, Sept. 1977, Tech. Div. British Paper and Board Ind. Fed., London, Vol. 2, 849-850.
110. Howarth, P. (1994). "Fundamental problem in recycling," Prog. Paper Recycling 3(3), 66-70.
111. Hubbe, M. A. (2005a). "Acidic and alkaline sizings for printing, writing, and drawing papers," The Book and Paper Group Annual 23, 139-151.
112. Hubbe, M. A. (2005b). "Dry-strength development by polyelectrolyte complex deposition onto non-bonding glass fibers," J. Pulp Paper Sci. 31(4), 159-166.
113. Hubbe, M. A. (2006a). "Sensing the electrokinetic potential of cellulosic fiber surfaces," BioResources 1(1), 116-149.
114. Hubbe, M. A. (2006b). "Bonding between Cellulosic Fibers in the Absence and Presence of Dry-Strength Agents - A Review," BioResources 1(2), 281-318.
115. Hubbe, M. A. (2007). "Incinerate, recycle, or wash and reuse," BioRes. 2(1), 1-2.
116. Hubbe, M. A., and Heitmann, J. A. (2007). "Review of factors affecting the release of water from cellulosic fibers during paper manufacture," BioResources 2(3), 500-533.
117. Hubbe, M. A., Jackson, T. L., and Zhang, M. (2003a). "Fiber surface saturation as a strategy to optimize dual-polymer dry strength treatment," Tappi J. 2(11), 7-12.
118. Hubbe, M. A., Moore, S. M., and Lee, S. Y. (2005). "Effects of charge ratios and cationic polymer nature on polyelectrolyte complex deposition onto cellulose," Indus. Eng. Chem. Res. 44(9), 3068-3074.
119. Hubbe, M. A., Rojas, O. J., and Venditti, R. A. (2006). "Control of tacky deposits on paper machines - A review," Nordic Pulp Paper Res. J. 21(2), 154-171.
120. Hubbe, M. A., Venditti, R. A., Barbour, R. L., and Zhang, M. (2003b). "Changes to unbleached kraft fibers due to drying and recycling," Prog. Paper Recycling 12(3), 11-20.
121. Hubbe, M. A., and Zhang, M. (2005). "Recovered kraft fibers and wet-end dry-strength polymers," Proc. TAPPI 2005 Practical Papermakers Conf., TAPPI Press, Atlanta, digital doc.
122. Huber, P., Carré, B., Petit-Conil, M., Fabry, B., and Bhattachargee, S. (2006). "Effect of the deinking process on physical properties of various wood-free recovered paper furnishes," Pulp Paper Can. 107(7-8), 34-40.
123. Hulit, D. D. (1978). "Discussion," in Fiber-Water Interactions in Paper-Making, Trans. Symp. Oxford, Sept. 1977, Tech. Div. British Paper and Board Ind. Fed., London, Vol. 2, 851.
124. Hunold, M., and Göttsching, L. (1996). "Multiple recycling in pilot plant scale," Papier 50(10A), V82-V90.
125. Iyer, P. B., Sreenivasan, S., Chidambareswaran, P. K., Patil, N. B., and Sundaram, V. (1991). "Induced crystallization of cellulose in never-dried cotton fibers," J. Appl. Poly. Sci. 42(6), 1751-1757.
126. Jacob, P. N., and Berg, J. C. (1993). "Contact angle titrations of pulp fiber furnishes," Tappi J. 76(5), 133-137.
127. Jahan, M. S. (2003). "Changes of paper properties of nonwood pulp on recycling," Tappi J. 2(7), 9-12.
128. Jang, H. F., Howard, R. C., and Seth, R. S. (1995). "Fiber characterization using confocal microscopy - Effects of recycling," Tappi J. 78(12), 131-137.
129. Jayme, G. (1944). "Micro-swelling measurement in cellulosic pulp," Papier-fabr./Wochenbl. Papierfabr. 6, 187-194.
130. Jayme, G., and Büttel, H. (1964). "The dependence of the water retention value (WRV) and the strength properties on the pH value of various bleached and unbleached pulps," Wochenbl. Papierfabr. 92(23/24), 718-727.
131. Jayme, G., and Büttel, H., (1968). "The determination and the meaning of water retention value (WRV) of various bleached and unbleached cellulosic pulps," Wochenbl. Papierfabr. 96(6), 180-187.
132. Jiang, Z.-H., van Lierop, B., and Berry, R. (2000). "Hexenuronic acid groups in pulping and bleaching chemistry," Tappi J. 83(1), 167-175.
133. Kang, T., and Paulapuro, H. (2006). "Recycle potential of externally fibrillated chemical pulp," Prog. Paper Recycling 15(2), 11-17.
134. Kato, K. L., and Cameron, R. E. (1999). "A review of the relationship between thermallyaccelerated ageing of paper and hornification," Cellulose 6(1), 23-40.
135. Kibblewhite, R. P. (1983). "The fibers of radiata pine mechanical pulps," Appita 36(4), 272-281.
136. Klungness, J. H., and Caulfield, D. F. (1982). "Mechanisms affecting fiber bonding during drying and aging of pulps," Tappi J. 65(12), 94-97.
137. Kimura, M., Hatakeyama, T, and Nakano, J. (1974). "DSC study on recrystallization of amporphous cellulose with water," J. Appl. Polym. Sci. 18(10), 3069-3076.
138. Kimura, Y., and Hamada, M. (1992). "Wet-end paper chemicals in a secondary fiber system," Proc. Pan-Pacific Pulp Paper Technol. Conf., Tokyo, Part B, 83-89.
139. Klofta, J. L., and Miller, M. L. (1993). "Effects of deinking on the recycle potential of papermaking fibers," Res. Forum Recycling (2nd), DAPPI, 5-7 Oct., 207-220.
140. Klungness, J. H. (1993). "Recycled-fiber properties as affected by contaminants and removal processes," Prog. Paper Recycling 3(1), 71-81.
141. Koning, J. W., and Godshall, W. D. (1975). "Repeated recycling of corrugated containers and its effect on strength properties," Tappi 58(9), 146-150.
142. Korpela, A. (1999). "The effects of fatty acid soaps on the properties of recycled mechanical and chemical pulp," Papier 53(10), 604-610.
143. Kulshreshtha, A. K., Patel, A. R., Baddi, N. T., and Srivastava, H. C. (1977). "Studies on never-dried cotton," J. Polymer Sci. 15, 165-183.
144. th, 409-414.
145. Laine, J., Lindström, Glad Nordmark, G., and Risinger, G. (2000). "Studies on topochemical modification of cellulosic fibers. Part 1. Chemical conditions for the attachment of carboxymethyl cellulose onto fibers," Nordic Pulp Paper Res. J. 15(5), 520-526.
146. Laine, J., Lindström, Glad Nordmark, G., and Risinger, G. (2002). "Studies on topochemical modification of cellulosic fibers. Part 2. The effect of carboxymethyl cellulose attachment on fiber swelling," Nordic Pulp Paper Res. J. 17(1), 50-56.
147. Laine, J., Lindström, Glad Nordmark, G., and Risinger, G. (2003). "Studies on topochemical modification of cellulosic fibers. Part 5. Comparison of the effects of surface and bulk chemical modification and beating on pulp and paper properties," Nordic Pulp Paper Res. J. 18(3), 325-332.
148. th Fund. Res. Symp., Oxford, Sept. 1993, C. F. Baker (ed.), Pira International, Leatherhead, Surrey, UK, Vol. 2, 1235-1259.
149. Laivins, G. V., and Scallan, A. M. (1996). "The influence of drying and beating on the swelling of fines," J. Pulp Paper Sci. 22(5), J178-184.
150. Law, K. N. (1996). "Study on cyclic reslushing of mechanical pulps," Prog. Paper Recycling 6(1), 32-38.
151. Law, K. N., Song, X. L., and Daneault, C. (2006). "Influence of pulping conditions on the properties of recycled fibers," Cellulose Chem. Technol. 40(5), 335-343.
152. Law, K., Valade, J. L., and Li, Z. (1995). "Recycling behavior of TMP - Effects of refining energy," Conf. Proc.: Refining 95: Third International Refining Conference, Atlanta, GA, Pira International, Leatherhead, United Kingdom, Vol. 2, 18 p.
153. Lee, H. L., and Joo, S. B. (2000). "The effect of recycling procedures of papermaking fibers and fines on the adsorption of cationic polyacrylamide," Nordic Pulp Paper Res. J. 15(5), 446-451.
154. Li, K. and Reeve, D. W. (2004a). "Determination of surface lignin of wood pulp fibres by X-ray photoelectron spectroscopy," Cellulose Chemistry and Technology 38(3-4), 197-210.
155. Li, K. and Reeve, D. W. (2004b). "Fluorescence labelling of lignin in the wood pulp fibre wall," Journal of Wood Chemistry and Technology, 24(2), 169-181.
156. Li, K. and Reeve, D. W. (2005). "Analysis of lignin distribution across the fibre wall with confocal laser scanning microscopy," Cellulose Chem. Technol. 39(3), 211-223.
157. Li, K., Tan, X., and Yan, D. (2006). "Middle lamella remainders on the surfaces of various mechanical pulp fibres," Surface and Interface Analysis, 38, 1328-1335.
158. Li, T.-Q., Henriksson, U., and Ödberg, L. (1993). "Determination of pore sizes in wood cellulose fibers by 2H and 1H NMR," Nordic Pulp Paper Res. J. 8(3), 326-330.
159. Lindström, T., and Carlsson, G. (1982). "The effect of carboxyl groups and their ionic form during drying on the hornification of cellulose fibers," Svensk Papperstidn. 85(15), R146-R151.
160. Lofton, M. C., Moore, S. M., Hubbe, M. A., and Lee, S. Y. (2005). "Polyelectrolyte complex deposition as a mechanism of paper dry-strength development," Tappi J 4(9), 3-7.
161. Lloyd, J. A., and Horne, C. W. (1993). "The determination of fiber charge and acidic groups of radiata pine pulps," Nordic Pulp Paper Res. J. 8(1), 48-52, 67.
162. Lundberg, R., and de Ruvo, A. (1978a). "Influence of drying conditions on recovery of swelling and strength of recycled fibers," Svensk Papperstidn. 81(11), 355-358.
163. Lundberg, R., and de Ruvo, A. (1978b). "The influence of defibration and beating conditions on the paper making potential of recycled paper," Svensk Papperstidn. 81(12), 383-386.
164. Lvov, Y. M., Grozdits, G. A., Eadula, S., Zheng, Z. G, and Lu, Z. H. (2006). "Layer nanocoating of mill broken fibers for improved paper," Nordic Pulp Paper Res. J. 21(5), 552-557.
165. Lyne, L. M., and Gallay, W. (1950). "The effect of drying and heating on the swelling of cellulose fibers and paper strength," Tappi 33(9), 429-435.
166. Maloney, T. C., Li, T.-Q., Weise, U., and Paulapuro, H. (1997). "Intra- and inter-fiber pore closure in wet pressing," Appita J. 50(40), 301-306.
167. Maloney, T. C., Johansson, T., and Paulapuro, H. (1998a). "Removal of water from the cell wall during drying," Paper Technol. 39(6), 39-47.
168. Maloney T. C., Paulapuro, H., and Stenius P. (1998b), "Hydration and swelling of pulp fibers measured with differential scanning calorimetry," Nordic Pulp & Paper Research Journal 13 (1), 31-36.
169. Malton, S., Kuys, K., Parker, I., and Vanderhoek, N. (1998). "Adsorption of cationic starch on eucalypt pulp fibers and fines," Appita J. 51(4), 292-298.
170. Mansito, O., Aguero, C., and Soa, M. (1992). "Recycling of bagasse pulps," O Papel 29, 69-70.
171. Mao, Z., and Yang, C. Q. (2001). "IR spectroscopy study of cyclic anhydride as intermediate for ester crosslinking of cotton cellulose by polycarboxylic acids. V. Comparison of 1,2,4-butanetricarboxylic acid and 1,2,3-propanetricarboxylic acid," J. Applied Polymer Sci. 81(9), 2142-2150.
172. Marton, J., and Marton, T. (1976). "Wet end starch: Adsorption of starch on cellulosic fibers," Tappi 59(12), 121-124.
173. Maximino, M. G., Formento, J. C., Adell, A. M., and Taleb, M. C. (2006). "Combined treatments to upgrade repulped long fiber kraft paper," Cellulose Chem. Technol. 40(6), 469-474.
174. McComb, R. E., and Williams, J. C. (1981). "The value of alkaline papers for recycling," Tappi 64(4), 93-96.
175. McKee, R. C. (1971). "Effect of repulping on sheet properties and fiber characteristics," Paper Trade J. 155(21), 34-40.
176. Middleton, S. R., and Scallan, A. M. (1994). "Filler retention and the specific surface area of fibers," Nordic Pulp Paper Res. J. 9(3), 156-160.
177. Milichovsky, M. (1990). "A new concept of chemistry refining processes," Tappi J. 73(10), 221-232.
178. Minor, J. L. (1994). "Hornification - Its origin and meaning," Prog. Paper Recycling 3(2), 93-95.
179. Minor, J. L., Scott, C. T., and Atalla, R. H. (1993). "Restoring bonding strength to recycled fibers," Recycling Symp., New Orleans, TAPPI Press, Atlanta, 379-385.
180. Mocchiutti, P., Zanuttini, M., Citroni, M., and Inalbon, M. C. (2006). "Effects of drying conditions and of the existing cationic starch in liner paper recycling," Cellulose Chem. Technol. 40(1-2), 87-91.
181. Moyers, B. M. (1991). "Diagnostic sizing loss problem solving in alkaline systems," Proc. TAPPI 1991 Papermakers Conf., TAPPI Press, Atlanta, 425-432.
182. Nanko, H., and Ohsawa, J. (1989). "Mechanisms of fiber bond formation," in Fundamentals of Papermaking, Vol. 2, 783-830, Waveney Print Services, Suffolk, UK.
183. Nazhad, M. A. (2004). "The role of fiber surface condition on paper strength," Proc. The 2004 Progress in Paper Physics Seminar, Trondheim, Norway, 91-94.
184. Nazhad, M. M. (2004). "The influence of refining energy and intensity on enhancing the bonding potential of an OCC pulp," Appita J. 57(3), 191-198.
185. Nazhad, M. M. (2005). "Recycled fiber quality - A review," J. Ind. Eng. Chem. 11(3), 314-329.
186. Nazhad, M. M., and Paszner, L. (1994). "Fundamentals of strength loss in recycled paper," Tappi J. 77(9), 171-179.
187. Neimo, L. (1999). Papermaking Chemistry, Papermaking Science and Technology series, No. 4, Fapet Oy, Helsinki.
188. Newman, R. H., and Hemmingson, J. A. (1997). "Cellulose cocrystallization in hornification of kraft pulp," Proc. 1997 ISWPC, Paper 01, 1-4.
189. Nguyen, X. T., Shariff, A., Earl, P. F., and Eamer, R. J. (1993). "Bleached pulps for printing and writing papers from old corrugated containers," Prog. Paper Recycling 3(2), 25-32.
190. Ogden, R. W. (1999). "Rehydration of once-dried fiber," US Pat. 5,825,218.
191. Okayama, T. (2002). "The effects of recycling on pulp and paper properties," Kami Pa Gikyoshi/Japan Tappi Journal 56(7), 62-68.
192. Oksanen, T., Buchert, J., and Viikari, L. (1997). "The role of hemicelluloses in the hornification of bleached kraft pulps," Holzforschung 51(4), 355-360.
193. Oye, R., Okayama, T., Yamazaki, T., and Yoshinaga, N. (1991). "Changes of pulp fiber cell wall by recycling," 1er Forum Recherche sur le Recyclage (1st Research Forum on Recycling), October 29-31, 1991, Toronto, Ontario, CPPA, Montreal, Quebec, Canada, 191-195.
194. Paavilainen, L. (1993). "Conformability - flexibility and collapsibility - of sulfate pulp fibers," Paperi Puu 75(9-10), 896-702.
195. Page, D. H. (1969). "A theory for the tensile strength of paper," Tappi 52(4), 674-681.
196. th Fundamental Research Symposium held at Cambridge, Sept. 1985, Mechanical Engineering Publications Ltd., London, Vol. 1, 183-277.
197. Page, D. H., and Tydeman, P. A. (1962). "A new theory of the shrinkage, structure, and properties of paper," in Bolam, F., Ed., Transactions of the Oxford Symposium, Tech. Sect. British Paper and Board Makers Assoc., London, 397-425.
198. Pala, H., Lemos, M. A., Mota, M., and Gama, F. M. (2001). "Enzymatic upgrade of old paperboard containers," Enzyme Microbial Technol. 29(4-5), 274-279.
199. Park, S., Venditti, R. A., Jameel, H., and Pawlak, J. J. (2006a). "Changes in pore size distribution during the drying of cellulose fibers as measured by differential scanning Calorimetry," Carbohydrate Polymers 66(1), 97-103.
200. Park, S., Venditti, R. A., Jameel, H., and Pawlak, J. J. (2006b). "A novel method to evaluate fiber hornification by high resolution thermogravimetric analysis," Appita J. 59(6), 481-485.
201. Park, S., Venditti, R. A., Jameel, H., and Pawlak, J. J. (2006c). "Hard to remove water in cellulose fibers characterized by high resolution thermogravimetric analysis - Methods development," Cellulose 13(1), 23-30.
202. Paulapuro, H. (2000). Papermaking. Part 1, Stock Preparation and Wet End, Papermaking Science and Technol. Ser., No. 8, Fapet Oy, Helsinki.
203. Pekkarinen, T. (1985). "Fractionation of OCC waste paper with a pressure screen," Proc. TAPPI 1985 Pulping Conf., TAPPI Press, Atlanta, 37-39.
204. Peng, Y. X.., Valade, J. L., and Law, K. N. (1994). "Effects of recycling and blending of virgin fibers on paper properties," China Pulp and Paper 13(2), 3-9.
205. Peterson, D., Qi, D., and Zhang, S. (2000). "Effects of fines concentration on mechanical properties of recycled paper," Proceedings of the 2000 TAPPI Recycling Symposium, Mar 5-8 2000, Washington, DC, Vol. 2, 653-661.
206. Phipps, J. (1994). "Effects of recycling on the strength properties of paper," Paper Technol. 35(6), 34-40.
207. Pruden, B. (2005). "The effect of fines on paper properties," Paper Technol. 46(4), 19-26.
208. Putz, H.-J. (1996). "How often can wastepaper be recycled?" Allg. Papier-Rundschau 120(31), 851-852.
209. Putz, H.-J. (2007). "Recyclability of paper and board products," International Paperworld IPW (4), 37-43
210. Putz, H.-J., Muller-Mederer, C., Kuhn, J., and Garber, W. (2003). "Recyclability of printed coated papers," International Paperworld IPW 12, 35-40.
211. Pycraft, C. J. H., and Howarth, P. (1980). "A method of measuring enzyme degradation of cellulose fibers," Paper Technol. Ind. 21(9), 283-285.
212. Pycraft, C. J. H., and Howarth, P. (1980). "Does better paper mean worse waste paper?" Paper Technol. Ind. 21(12), 321-324.
213. Qian, L., He, B., Huang, Y., and Zhan, H. (2005). "Effects of recycling on mason pine pulp properties," Prog. Paper Recycling 14(3), 19-23.
214. th International Symposium on Wood and Pulping Chemistry, June 6-9, 1995, Helsinki, Finland: Proceedings, 3: Poster Presentations, 261-266.
215. Retulainen, E., Luukko, K., Fagerholm, K., Pere, J., Laine, J., and Paulapuro, H. (2002). "Papermaking quality of fines from different pulps - the effect of size, shape, and chemical composition," APPITA J. 55(6), 457-460.
216. Roberts, J. C. (ed.), Paper Chemistry, 2nd Ed., Blackie, Chapman and Hall, London.
217. Roberts, J. C., Au, C. O., Clay, G. A., and Lough, C. (1986). "The effect of C14-labelled cationic and native starches on dry strength and formation," Tappi J. 69(10), 88-93.
218. Robertson, A. A. (1964). "Some observations on the effects of drying papermaking fibers," Pulp Paper Mag. Can. 65(3), T161-T168.
219. Roffael, E., and Schaller, K. (1971). "Influence of thermal treatment on cellulose," Holz als Roh-und Werkstoff 29(7), 275-278.
220. Rojas, O. J. (2004). "Surfactantes no destintamento do paper (Surfactants in Paper Deinking)," O Papel 65(12), 62.
221. Rojas, O. J., Dedinaite, A., Byrd, M. V., Hubbe, M. A. and Claesson, P. M. (2005). "On the origins of adhesion in papermaking systems," (S. J. I'Anson, ed.), 2: 1351-1378, Digital Books Logistics Ltd, Peterborough, UK.
222. Rossi, S., Osterberg, F., Eriksson, L., and Kouppa, H. (1994). "Effect of recycling of the fiber on the properties of the fiber and of the paper," Industria della Carta 32(5), 241-250.
223. Ruffini, G. (1966). "Improvement in bonding of wood pulps by the presence of acidic groups," Svensk. Papperstidn. 69, 72-76.
224. Rundöf, M., Htun, H., Höglund, H., and Wågberg, L. (2000). "Mechanical pulp fines of poor quality - Characteristics and influence of white water," J. Pulp Paper Sci. 26(9), 308-316.
225. Santos, J. M. R. C. A., Portugal, A., and Guthrie, J. T. (2001). "Characterization of the surface of a cellulosic multi-purpose office paper by inverse gas chromatography," Cellulose 8(3), 217-224.
226. Scallan, A. M. (1977). "The accommodation of water within pulp fibers," in Fiber-Water Interactions in Papermaking, Trans. Symp. Oxford, Tech. Div. British Paper and Board Industry Federation, London, Vol. 1, 9-29.
227. Scallan, A. M. (1998). "Mechanisms of hornification," Proc. Improvement of recyclability and the recycling paper industry of the Future, A. Blanco, C. Negro, I Gaspar, M. C. Monte, and J. Tijero, (eds.), COST Action E1, La Palmas de Gran Canaria, 24-26 Nov., 312-314.
228. Scallan, A. M., and Carles, J. E. (1972). "The correlation of the water retention value with the fiber saturation point," Svensk Papperstidn. 75(7), 699-703.
229. Scallan, A., and Tigerstrom, A. C. (1991), "Elasticity of fiber wall; Effects of pulping and recycling," Proc. CPPA 1st Res. Forum on Recycling, CPPA, Montreal, 149-154.
230. Scott, W. E. (1989). "A survey of the various contaminants present in recycled wastepaper white water systems," Proc. 1989 Contaminant Problems and Strategies in Wastepaper Recycling, TAPPI Press, Atlanta, 69-80.
231. Scott, W. E. (1996). Principles of Wet End Chemistry, TAPPI Press, Atlanta.
232. Scott, W. E., Abbott, J. C., and Trosset, S. (1995). Properties of Paper: An Introduction, TAPPI Press, Atlanta.
233. Shao, S. Y., and Hu, K. T. (2002). "Hornification of recycled fiber," China Pulp Paper (2), 57-60.
234. Shao, Z. and Li, K, (2006). "Surface lignin and interfibre bonding," Journal of Wood Chemistry and Technology, 26(3), 231-244.
235. Shen, W., Filonanko, Y., Truong, Y., Parker, I. H., Brack, N., Pigram, P., and Liesegang, J. (2000). "Contact angle measurement and surface energetics of sizes and unsized paper," Colloids Surf. A 173(1), 117-126.
236. Shrinath, A., Szewczak, J. T., and Bowen, I. J. (1991). "A review of ink-removal techniques in current deinking technology," Tappi J. 74(7), 85-93.
237. Siewert, W. H. (1996). "Potential for improving the quality of waste paper stock," Wochenbl. Papierfabr. 124(6), 217-220.
238. Singh, S., and Roy, D. N. (1996). "The effect of recycling on chemical properties of the thermomechanical pulp," J. Wood Chem. Technol. 16(4), 421-437.
239. Sjöström, L., and Ödberg, L. (1997). "Influence of wet-end chemicals on the recyclability of paper," Papier 51(6A), V69-V73.
240. Slavic, I., and Kucerova, M. (1967). "Formation of lactone bonds in cellulose during acidification and drying," Faserforsch Techtiltech. 18, 396-397.
241. Sohn, S. D., and Paik, K. H. (2006). "Effects of initial calendering on physical properties of recycled pulp handsheets," J. Industrial Eng. Chem. 12(3), 460-468.
242. Somwang, K., Enomae, T., Isogai, A., and Onabe, F. (2002). "Changes in crystallinity and re-swelling capacity of pulp fibers by recycling treatment," Kami Pa Gikyoshi/Japan Tappi Journal 56(6), 103-109.
243. Somwang, O., Enomae, T., and Onabe, F. (2001). "Effect of fiber hornification in recycling on bonding potential at Interfiber crossings: Confocal laser-scanning microscopy," Kami Pa Gikyoshi/Japan Tappi Journal 56(2), 79-85.
244. Stauffer, T., Venditti, R. A., Gilbert, R. D., Kadla, J. F., and Montero, G. (2001). "The removal of wax from wax containing old corrugated containers using supercritical CO2," J. Appl. Polymer Sci. 81, 1107-1114.
245. th Fundamental Res. Symp., Oxford, Punton, V. (ed.), Mechanical Engineering Publ. Ltd., London, Vol. 1, 311-337.
246. Stone, J. E., and Scallan, A. M. (1966). "Influence of drying on the pore structures of the cell wall," in Consolidation of the Paper Web, Trans. Symp. Cambridge, Sept. 1965, F. Bolam (ed.), Tech. Sec. British Paper and Board Makers' Assoc. Inc, London, Vol. 1, 145-174.
247. Stone, J. E., and Scallan, A. M. (1968). "A structural model for the cell wall of waterswollen wood pulp fibers based on their accessibility to macromolecules," Cellulose Chem. Technol. 2(3), 343-358.
248. Stürmer, L., and Göttsching, L. (1979). "Physical properties of secondary fiber pulps under the influence of their previous history. Part 3: Influence of the paper manufacturing process," Wochenbl. Papierfabr. 107(3), 69-76.
249. Sumi, Y., Hale, R. D., and Rånby, B. G. (1963). "The accessibility of native cellulose microfibrils" Tappi 46(2), 126-130.
250. Sundberg, K. E., Sundberg, A. C., Thornton, J. W., and Holmbom, B. R. (1998). "Pectic acids in the production of wood-containing paper," Tappi J. 81(7), 131-136.
251. Sundholm, J. (ed.) (1999). Mechanical Pulping, Papermaking Science and Technology ser. No. 5, Fapet Oy, Helsinki.
252. Swanson, J. W., and Cordingly, S. (1959). "Surface chemical studies on pitch. II. The mechanism of the loss of absorbency and development of self-sizing in papers made from wood pulp," Tappi 42(10), 812-819.
253. Szwarcsztajn, E., and Przybysz, K. (1976). "Investigation on changes in the properties of recycled pulp fractions," Cell. Chem. Technol. 10, 737-749.
254. Szwarcsztajn, E., and Przybysz, K. (1978). "The role of pulp fractions and processing variables in recycling," in Fiber-Water Interactions in Papermaking, Techn. Div. British Paper and Board I. F., London, 857-876.
255. Tam Doo, P. A., and Kerekes, R. J. (1982). "The flexibility of wet pulp fibers," Pulp Paper Can. 83(2), T37-T42.
256. Teachman, J. J., Williams, M. W., and Qi, D. (1998). "Effect of recycling of thermomechanical pulps on sheet surface properties and fines content," Prog. Paper Recycling 7(4). 11-19.
257. Tschirner, J., Barsness, J., and Keeler, T. (2007). "Recycling of chemical pulp from wheat straw and corn stover," BioRes. 2(4), 536-543.
258. Tschirner, U., Cao, B., and Ramaswamy, S. (1998). "Study of changes in wet-fiber flexibility and surface condition of recycled fibers," Proc. TAPPI 1998 Recycling Symposium: Proceedings, March 8, New Orleans, LA, TAPPI Press, Atlanta, 149-162.
259. Tschirner, U., and Wang, D. (1998). "Hydrogen peroxide bleaching of mixed recycled fiber," Prog. Paper Recycling 8(1), 15-22.
260. Thode, E. F., Chase, A. J., and Hu, Y. (1955). "Dye adsorption on wood pulp. IV. Note on effect of drying of pulp on specific dye adsorption," Tappi 38(2), 88-89.
261. Torgnysdotter, A., and Wågberg, L. (2006). "Tailoring of fiber/fiber joints in order to avoid the negative impacts of drying on paper properties," Nordic Pulp Paper Res. J. 21(3), 411-418.
262. Tze, W. T., and Gardner, D. J. (2001a). "Swelling of recycled wood pulp fibers: Effect on hydroxyl availability and surface chemistry," Wood Fiber Sci. 33(3), 364-376.
263. Tze, W. T., and Gardner, D. J. (2001b). "Contact angle and IGC measurements for probing surface-chemical changes in the recycling of wood pulp fibers," J. Adhes. Sci. Technol. 15(2), 223-241.
264. Van Wyk, W., and Gerischer, G. (1982). "The influence of recycling on the strength properties of machine made paper," Paperi Puu 64(9), 526-533.
265. Venditti, R. A., Chang, H.-M., and Copeland, K. L. (2005). "Evaluation of various adhesive contaminant (stickies) analysis methods: Tracking stickies concentrations across unit operations in old corrugated container recycling plants," Prog. Paper Recycling 14(2), 9-16.
266. Venditti, R. A., Kadla, J. F., Gilbert, R. D., Jameel, H., and Chang, H.-M. (2001). "Three novel wax removal methods for wax containing old corrugated containers: Carbon dioxide extraction, kraft pulping, and agglomeration," TAPPI Pulping Conf. Proc., Seattle, WA, TAPPI Instant Reference.
267. Venditti, R., Gilbert, R., Zhang, A., and Abubakr, S. (2000). "The effect of release liner materials on adhesive contaminants, paper recycling and recycled paper properties," Proc. 2000 TAPPI Recycling Symp., Mar 5-8 2000, Washington, DC, TAPPI Press, Atlanta, Vol. 2, 579-591.
268. Vinson, K., Byrd, M., Jameel, H., Chang, H. M., Venditti, R. A., and Heitmann, J. A. (2001). "Fiber fractionation of mixed office waste for production of value-added products," TAPPI Pulping Conf. Proc., Seattle, 1116-1129.
269. Wadehra, L., and Manley, R. St. J. (1965). "Recrystallization of amorphous cellulose," J. Appl. Polym. Sci. 9(7), 2627-2630.
270. Wågberg, L., Forsberg, S., Johansson, A., and Juntti, P. (2002). "Engineering of fibre surface properties by application of the polyelectrolyte multilayer concept. Part I: Modification of paper strength," J. Pulp Paper Sci. 28 (7), 222-228.
271. Wågberg, L., and Ödberg, L., (1989). "Polymer adsorption on cellulosic fibers," Nordic Pulp Paper Res. J. 4(2), 135-140.
272. Wahren, D., and Berg, B. (1972). "Reuse of cellulose fibers," Svensk Papperstidn. 75(4), 125-130.
273. Walecka, J. A. (1956). "An investigation of low degree of substitution carboxymethylcelluloses," Tappi 39(7), 458-463.
274. Wang, X., Maloney, T. C., and Paulapuro, H. (2003). "Internal fibrillation in never-dried and once-dried chemical pulps," Appita J. 56(6), 455-459.
275. Watanabe, A., and Mitsuhiro, S. (2005). "A report on an investigation of recyclability of troublesome paper materials in the paper recycling process," Kami Pa Gikyoshi/ Japan Tappi Journal 59(7), 17-32.
276. Webb, L. J. (1992). "Secondary fiber and wet end chemistry," Proc. The Chemistry of Papermaking Conf., Pira International, Leatherhead, Surrey, UK, 1-18.
277. Weise, U. (1998). "Hornification - Mechanisms and terminology," Paperi Puu 80(2), 110-115.
278. Weise, J., Hiltunen, E., and Paulapuro, H. (1998). "Hornification of cellulosic pulp and measures to reverse it," Papier (10A), V14-V19.
279. Weise, U., Maloney, T., and Paulapuro, H. (1996). "Quantification of water in different states of interaction with wood pulp fibers," Cellulose 3(4), 189-202.
280. Weise, U., and Paulapuro, H. (1996). "The relationship between fiber shrinkage and hornification," Papier 50(6), 328-333.
281. Weise, U., and Paulapuro, H. (1998). "Relation between fiber shrinkage and hornification," Prog. Paper Recycling 7(3), 14-21.
282. Weise, U. and Paulapuro, H. (1999). "Effect of drying and rewetting cycles on fiber swelling," J. Pulp Paper Sci. 25(5), 163-166.
283. Welf, E. S., Venditti, R. A., Hubbe, M. A., and Pawlak, J. J. (2005). "The effects of heating without water removal and drying on the swelling as measured by water retention value and degradation as measured by intrinsic viscosity of cellulose papermaking fibers," Prog. Paper Recycling 14(3), 1-9.
284. Whang, H.-S., and Gupta, B. S. (2000). "Surface wetting characteristics of cellulosic fibers," Textile Res. J. 70(4), 351-358.
285. Williams, J. C. (1980). "Retaining the strength of secondary fibers with alkaline calcium carbonate fillers," Paper Trade J. 164(22), 33-34.
286. Wistara, N., and Young, R. A. (1999). "Properties and treatments of pulps from recycled paper. Part 1. Physical and chemical properties of pulps," Cellulose 6(4), 291-324.
287. Xu, Y., Yang, C. Q., and Chen, C.-M. (1999). "Wet reinforcement of paper with highmolecular-weight multifunctional carboxylic acid," Tappi J. 82(2), 150-156.
288. Yamagishi, Y., and Oye, R. (1981). "Influence of recycling on wood pulp fibers -Changes in properties of wood pulp fibers with recycling," Japan Tappi J. 35(9), 787-797.
289. Youn, H. J., Chin, S. M., Choi, I. S., and Kim. J. Y. (2007). "Fractionation of KOCC for better utilization - Effect of screen design parameter and reject flow rate on flocculation efficiency," IPPTA: Quarterly Journal of Indian Pulp and Paper Technical Association 19(1), 97-99.
290. Zhang, M., Hubbe, M. A., Venditti, R. A., and Heitmann, J. A. (2001). "Effect of chemical pretreatments of never-dried pulp on the strength of recycled linerboard," Proc. 2001 TAPPI Papermakers Conf., TAPPI Press, Atlanta, digital doc.
291. Zhang, M., Hubbe, M. A., Venditti, R. A., and Heitmann, J. A. (2002). "Can recycled kraft fibers benefit from chemical addition before they are first dried"? Appita J. 55(2), 135-144.
292. Zhang, M., Hubbe, M. A., Venditti, R. A., and Heitmann, J. A. (2004). "Effects of sugar addition before drying on the wet flexibility of redispersed kraft fibers," J. Pulp Paper Sci. 30(1), 29-34.
293. Zhang, M., Hubbe, M. A., Venditti, R. A., and Heitmann, J. A. (2004). "Refining to overcome effects of drying unbleached kraft fibers in the presence or absence of sugar," Prog. Paper Recycling 13(2), 5-12.
294. Xu, Y., Li, K., and Zhang, M. (2007). "Lignin precipitation on pulp fibres in ethanol based organosolv pulping," Colloids and Surfaces A: Physicochemical and Engineering Aspects, 301(1-3), 255-263.