Effect of nozzle geometrical and dynamic factors on cavitating and turbulent flow in a diesel multi-hole injector nozzle

International Journal of Thermal Sciences

Volumn 70, Issue , 2013, Pages 132-143

  He, Zhixia ^a   Zhong, Wenjun ^a   Wang, Qian ^a   Jiang, Zhaochen ^a   Shao, Zhuang ^a  

^a JIANGSU UNIVERSITY   (China)

Author keywords

Diesel engine Injector nozzle Cavitating flow Visual experiment Numerical simulation

Indexed keywords

CAVITATION INCEPTION; DIESEL INJECTOR NOZZLES; DISCHARGE COEFFICIENTS; INJECTOR NOZZLE; MULTI-HOLE INJECTORS; SPRAY CHARACTERISTICS; THREE-DIMENSIONAL NUMERICAL SIMULATIONS; VISUALIZATION EXPERIMENT;

CAVITATION; DIESEL ENGINES; FLOW VISUALIZATION; JET PUMPS; ORIFICES; THREE DIMENSIONAL; TURBULENCE; VAPORS;

SPRAY NOZZLES;

EID: 84877578383     PISSN: 12900729     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijthermalsci.2013.03.008     Document Type: Article

References (39)

1. N. Tamaki The effect of the cavitation in the holes of injection nozzles on the fuel sprays atomization Foreign Diesel Locomotive 338 8 1998 23 29
2. H. Chaves, and M. Knapp Experimental study of cavitation in the nozzle hole of diesel injectors using transparent nozzles SAE Paper 1995 199 211 950290
3. D.P. Schmidt, and M.L. Corradini Analytical prediction of the exit flow of cavitating orifices Atomization and Sprays 7 6 1997 54 65
4. R. Tatschl, C. Kunsberg Sarre, E. Berg, IC-engine spray modeling - status and outlook, International Multidimensional Engine Modeling User's Group meeting at the SAE congress 2002.
5. C. Soteriou, M. Smith, and R. Andrews Direct injection diesel sprays and the effects of cavitation and hydraulic flip on atomization SAE Paper 1995 1995 950080
6. H. Hiroyasu Spray breakup mechanism from the hole-type nozzle and its applications Atomization and Sprays 10 2000 511 527
7. F. Payri, V. Bermudez, R. Rayri, and F.J. Salvador The influence of cavitation on the internal flow and the spray characteristics in diesel injection nozzles Fuel 83 2004 419 431
8. R. Payri, J.M. García, F.J. Salvador, and J. Gimeno Using spray momentum flux measurements to understand the influence of diesel nozzle geometry on spray characteristics Fuel 84 2005 551 561
9. H.K. Suh, and C.S. Lee Effect of cavitation in nozzle orifice on the diesel fuel atomization characteristics International Journal of Heat and Fluid Flow 29 2008 1001 1009
10. S.H. Park, H.K. Suh, and C.S. Lee Effect of bioethanol-biodiesel blending ratio on fuel spray behavior and atomization characteristics Energy Fuels 23 2009 4092 4098
11. J.M. Desantes, R. Payri, and F.J. Salvador Influence of cavitation phenomenon on primary break-up and spray behavior at stationary conditions Fuel 89 10 2010 3033 3041
12. A. Osman Failure of a diesel engine injector nozzle by cavitation damage Engineering Failure Analysis 13 2006 1126 1133
13. J.H. Kim, K. Nishida, T. Yoshizaki, and H. Hiroyasu Characterization of flows in the sac chamber and the discharge hole of a DI diesel injection nozzle by using a transparent model nozzle SAE Paper 1997 972942
14. C. Arcoumanis, H. Flora, M. Gavaises, and N. Kampanis Investigation of cavitation in a vertical multi-hole injector SAE Paper 1999 661 678 1999-01-0524
15. C. Arcoumanis, H. Flora, and M. Gavaises Cavitation in real-size multi-hole diesel injector nozzles SAE Paper 2000 1485 1499 2000-01-1249
16. A. Andriotis, M. Gavaises, and C. Arcoumanis Vortex flow and cavitation in diesel injector nozzles Journal of Fluid Mechanics 610 2008 195 215
17. R. Payri, F.J. Salvador, and J. Gimeno Study of cavitation phenomena based on a technique for visualizing bubbles in a liquid pressurized chamber International Journal of Heat and Fluid Flow 30 4 2009 768 777
18. F. Payri, R. Payri, and F.J. Salvador A contribution to the understanding of cavitation effects in diesel injector nozzles through a combined experimental and computational investigation Computers & Fluids 58 2012 88 101
19. S.H. Park, H.K. Suh, and C.S. Lee Nozzle flow and atomization characteristics of ethanol blended biodiesel fuel Renewable Energy 35 2010 144 150
20. D.P. Schmidt, C.J. Rutland, and M.L. Corradini A numerical study of cavitating flow through various nozzle shapes SAE Paper 1997 971597
21. N. Dumont, O. Simonin, C. Habchi, Cavitating flow in diesel injectors andatomisation: a bibliographical review, in: Proc. of the 8th Int. Conf. On Liquid Atomization and Spray Systems ICLASS-, 2000, 314-323.
22. C. Habchi, N. Dumont, and O. Simonin Multidimensional simulation of cavitating flows in diesel injectors by a homogeneous mixture modeling approach Atomization Sprays 18 2008 129 162
23. C. Vortmann, G.H. Schnerr, and S. Seelecke Thermodynamic modeling and simulation of cavitating nozzle flow International Journal of Heat and Fluid Flow 24 2003 774 783
24. A.K. Singhal, M.M. Athavale, H. Li, and Y. Jiangs Mathematical basis and the full cavitation model Journal of Fluids Engineering 124 2002 617 624
25. W. Yuan, and G.H. Schenerr Numerical simulation of two-phase flow in injection nozzles: interaction of cavitation and external jet formation Journal of Fluids Engineering 125 2003 963 969
26. C. Arcoumanis, and M. Gavaises Linking nozzle flow with spray characteristics in a diesel fuel injection system Atomization and Sprays 8 1998 307 347
27. E. Giannadakis, M. Gavaises, H. Roth, C. Arcoumanis, Cavitating modelling insingle-hole diesel injector based on Eulerian-Lagrangian approach, in: THIESEL 2004, conference on thermo and fluid dynamic processes in diesel engines, Valencia, Spain, September 10-13, 2004.
28. F. Echouchene, H. Belmabrouk, and L. Le Penven Numerical simulation of wall roughness effects in cavitating flow International Journal of Heat and Fluid Flow 32 5 2011 I1068 1075
29. M. Battistoni, and C.N. Grimaldi Numerical analysis of injector flow and spray characteristics from diesel injectors using fossil and biodiesel fuels Applied Energy 97 2012 656 666
30. Thulasi Vijayakumar, Karuppa Raj Rajagopal Thundil, and Kasianantham Nanthagopal Effect of the injection pressure on the internal flow characteristics for diethyl and dimethyl ether and diesel fuel injectors Thermal Science 15 4 2011 1123 1130
31. Won Geun Lee, and Rolf D. Reitz A numerical investigation of transient flow and cavitation within minisac and valve-covered orifice diesel injector nozzles Journal of Engineering for Gas Turbines and Power Transactions of the ASME 132 2010 5
32. S. Som, S.K. Aggarwal, and E.M. EI-Hannouny Investigation of nozzle flow and cavitation characteristics in a diesel injector ASME Journal of Engineering for Gas Turbines and Power 132 2010 1 12
33. Z. He, D. Li, and L. Hu Numerical simulation and analysis of two-phase flow of inner cavitation in injection nozzles Transactions of CSICE (Chinese Society for Internal Combustion Engines) 22 5 2004 433 438
34. Z. He, Q. Mu, and Q. Wang Effect of diesel nozzle geometry on internal cavitating flow Advanced Materials Research 97-101 2010 2925 2928
35. L. Rayleigh On the pressure developed in a liquid during the collapse of a spherical cavity Philosophical Magazine 34 1917 94 98
36. C.E. Brennen Cavitation and Bubble Dynamics 1995 Oxford University Press New York
37. L.J. Guo Fluid Dynamics of Two Phase and Multiphase System 2002 Xi'an Jiaotong University Press Xi'an
38. W.Q. Tao Numerical Heat Transfer 1988 Xi'an Jiaotong University Press Xi'an
39. R. Payri, F.J. Salvador, and J. Gimeno Effects of nozzle geometry on direct injection diesel engine combustion process Applied Thermal Engineering 29 2009 2051 2060