Influence of cavitation phenomenon on primary break-up and spray behavior at stationary conditions

Fuel

Volumn 89, Issue 10, 2010, Pages 3033-3041

  Desantes, J M ^a   Payri, R ^a   Salvador, F J ^a   De La Morena, J ^a  

^a UNIVERSITAT POLITÈCNICA DE VALÈNCIA   (Spain)

Author keywords

Cavitation; Diesel; Injector; Near nozzle; Spray

Indexed keywords

AXISYMMETRIC; BACKLIGHT ILLUMINATION; BREAK-UP; CAVITATION BUBBLE; CAVITATION INCEPTION; CAVITATION PHENOMENON; CHAMBER PRESSURE; DIESEL; DIESEL INJECTORS; INJECTION PRESSURES; INJECTOR; MASS FLOW; MASS FLOW MEASUREMENT; NOZZLE EXITS; NOZZLE FIELD; PRESSURE CONDITIONS; PRESSURIZED CHAMBERS; SPRAY CHARACTERISTICS; SPRAY CONE ANGLE; STATIONARY CONDITIONS; TEST POINTS; TEST STRATEGIES;

CAVITATION; FLOWMETERS; JET PUMPS; LIQUID FUELS; LIQUIDS; MASS TRANSFER; ORGANIC POLYMERS; PRESSURE DROP; REFRACTIVE INDEX; VISUALIZATION;

SPRAY NOZZLES;

EID: 77955281914     PISSN: 00162361     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.fuel.2010.06.004     Document Type: Article

References (30)

1. Hiroyasu H, Arai, A. Structures of fuel sprays in Diesel engines. SAE Paper 900475; 1990.
2. R.J.H. Klein-Douwel, P.J.M. Frijters, X.L.J. Seykens, L.M.T. Somers, and R.S.G. Baert Gas density and rail pressure effects on Diesel spray growth from a heavy-duty common rail injector Energy Fuels 23 2009 1832 1842 [special issue]
3. S.S. Sazhin, G. Feng, and M.R. Heikal A model for fuel spray penetration Fuel 80 2001 2080 2171
4. C.S. Lee, K.H. Lee, R.D. Reitz, and S.W. Park Effect of split injection on the macroscopic development and atomization characteristics of a Diesel spray injected through a common-rail system Atomization Sprays 16 5 2006 543 562
5. J.M. Desantes, R. Payri, F.J. Salvador, and A. Gil Development and validation of a theoretical model for diesel spray penetration Fuel 85 2006 910 917
6. R. Payri, F.J. Salvador, J. Gimeno, and J. De la Morena Macroscopic behavior of Diesel Sprays in the near-nozzle field SAE Int J Engines 1 1 2008 528 536
7. Hattori H, Naruyima K, Tsue M, Kadota T. Analysis of initial break-up mechanism of Diesel Spray injected into high-pressure ambience. SAE Paper 2004-01-0528; 2004.
8. M.A. Linne, M. Paciaroni, E. Berrocal, and D. Sedarsky Ballistic imaging of liquid break-up processes in dense sprays Proc Combustion Inst 32 2009 2147 2161
9. Leick P., Riedel T., Bittlinger, G., Powell, C.F., Kastengren, A.L., Wang, J. X-ray measurements of the mass distribution in the dense primary break-up region of the spray from a standard multi-hole common-rail Diesel injection system. ILASS-Europe 2007, Mulga, Turkey, 10-12 September; 2007.
10. R. Payri, J.M. García, F.J. Salvador, and J. Gimeno Using spray momentum flux to understand the influence of diesel nozzle geometry on spray characteristics Fuel 84 2005 551 561
11. F. Payri, V. Bermúdez, R. Payri, and F.J. Salvador The influence of cavitation on the internal flow and the spray characteristics in diesel injection nozzles Fuel 83 2004 419 431
12. H. Hiroyasu Spray breakup mechanism from the hole-type nozzle and its applications Atomization Sprays 10 2000 511 527
13. A. Sou, S. Hosokawa, and A. Tomiyama Effects of cavitation in a nozzle on liquid jet atomization Int. J. Heat Mass Transfer 50 2007 3575 3582
14. A. Andriotis, and M. Gavaises Influence of vortex flow and cavitation on near-nozzle Diesel spray dispersion angle Atomization Sprays 19 3 2009 247 261
15. H.K. Suh, and C.S. Lee Effect of cavitation in nozzle orifice on the Diesel fuel atomization characteristics Int J Heat Fluid Flow 29 4 2008 1001 1009
16. L.C. Ganippa, G. Bark, S. Andersson, and J. Chomiak Cavitation: a contributory factor in the transition from symmetric to asymmetric jets in cross flow nozzles Exp Fluids 36 2004 627 634
17. W.H. Nurick Orifice cavitation and its effect on spray mixing ASME J Fluids Eng 1976 681 687
18. R. Payri, C. Guardiola, F.J. Salvador, and J. Gimeno Critical cavitation number determination in Diesel injection nozzles Exp Technol 28 3 2004 49 52
19. Soteriou C, Smith M, Andrews R. Direct injection Diesel sprays and the effects of cavitation and hydraulic flip on atomization. Presented at SAE World Congress, 950080; 1995.
20. A. Lichtarowicz, R.K. Duggins, and E. Markland Discharge coefficients for incompressible non-cavitating flow through long orifices J Mech Eng Sci 7 2 1965
21. H. Li, and S.H. Collicott Visualization of cavitation in high-pressure Diesel fuel injector orifices Atomization Sprays 16 2006 875 886
22. C. Badock, R. Wirth, A. Fath, and A. Leipertz Investigation of cavitation in real size Diesel injection nozzles Int. J. Heat Fluid Flow 20 5 1999 538 544
23. Winklhofer E, Kull E, Kelz E, Morozov A. Comprehensive hydraulic and flow field documentation in model throttle experiments under cavitation conditions. ILASS-Europe 2001, Zurich 2-6 September; 2001.
24. C. Mischra, and Y. Peles Cavitation in flow through a micro-orifice inside a silicon microchannel Phys Fluids 17 2005 013601
25. R. Payri, F.J. Salvador, J. Gimeno, and G. Bracho A new methodology for correcting the signal cumulative phenomenon on injection rate measurements Exp Technol 32 1 2008 46 49
26. Otsu N. A threshold selection method from gray-level histograms. IEEE Trans Systems Man Cybernet SMC-9; 1979.
27. R. Payri, F.J. Salvador, J. Gimeno, and J. De la Morena Study of cavitation phenomena based on a technique for visualizing bubbles in a liquid pressurized chamber Int J Heat Fluid Flow 3 2009 768 777
28. K. Ramamurthi, and K. Nandakumar Characteristics of flow through small sharp-edged cylindrical orifices Flow Meas Instrum 10 1999 133 143
29. R. Payri, F.J. Salvador, J. Gimeno, and V. Soare Determination of diesel spray characteristics in the real engine in-cylinder air density and pressure conditions J Mech Sci Technol 19 11 2005 2040 2052
30. J.M. Desantes, J.V. Pastor, R. Payri, and J.M. Pastor Experimental characterization of internal nozzle flow and Diesel spray behavior. Part II: evaporative conditions Atomization Sprays 15 5 2005 517 543 (Pubitemid 41366852)