Residual strength of concrete containing recycled materials after exposure to fire: A review

Construction and Building Materials

Volumn 45, Issue , 2013, Pages 208-223

  Cree, D ^a   Green, M ^a   Noumowe A ^b  

^a QUEEN S UNIVERSITY   (Canada)

^b UNIVERSITÉ DE CERGY PONTOISE   (France)

Author keywords

Brick; Concrete; Fire resistance; High temperature; Limestone; Recycled materials; SCM; Sustainable concrete

Indexed keywords

COMPRESSION STRENGTH; HIGH TEMPERATURE; LOADING CONDITION; MATERIAL PROPERTY MEASUREMENTS; RECYCLED MATERIALS; SCM; SUPPLEMENTARY CEMENTING MATERIALS; SUSTAINABLE CONCRETES;

ASHES; BLAST FURNACES; BRICK; CONCRETE AGGREGATES; CONCRETES; CONSTRUCTION INDUSTRY; FIRE RESISTANCE; FLY ASH; FUMES; LIMESTONE; LOADING; RECYCLING; RESEARCH; SILICA FUME; SLAGS;

STRENGTH OF MATERIALS;

EID: 84877349339     PISSN: 09500618     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.conbuildmat.2013.04.005     Document Type: Review

References (87)

1. EPA., 2003. "Estimating 2003 building-related construction and demolition materials amounts", US Environmental Protection Agency Report #: EPA530-R-09-002. March; 2009.
2. Ministry of Industry Canada. Waste Management Industry Survey: Business and Government Sectors 2007. Catalogue no. 16F0023XIE; 2004.
3. Ministry of Industry Canada. Waste Management Industry Survey: Business and Government Sectors 2010. Catalogue No. 16F0023X; 2008.
4. Schneider. Ulrich Concrete at high temperatures-a general review Fire Safety J 13 1988 55 68
5. Naus NJ. The effect of elevated temperature on concrete materials and structures- a literature review. US Nuclear Regulatory Commission, Office of Nuclear Regulatory Research, Washington, DC, 2006; 1-184.
6. Phan LT. Fire performance of high-strength concrete: a report of the state-of-the-art. NISTIR 5934, National Institute of Standards and Technology, Gaithersburg, Maryland; 1996.
7. F.M. Khalaf, and A.S. DeVenny Recycling of demolished masonry rubble as coarse aggregate in Concrete: review ASCE J Mater Civil Eng 2004 31 40
8. T.C. Hansen Recycled aggregates and recycled-aggregate concrete: state-of-the-art report developments. 1945-1985 RILEM Technical Committee-37-DRC Mater Struct 19 111 1986 201 246
9. V.M. Malhotra Fly ash, slag, silica fume and rice husk ash in concrete Concr Int 15 4 1993 23 28 (Pubitemid 23676008)
10. R.D. Hooton Canadian use of ground granulated blast-furnace slag as a supplementary cementing material for enhanced performance of concrete Can J Civil Eng 27 2000 754 760
11. M.F. Khalaf, and S.A. DeVenny Performance of brick aggregate concrete at high temperatures J Mater Civil Eng 16 6 2004 556 565
12. P.J.E. Sullivan, and R. Sharshar Performance of concrete at elevated temperatures (as measured by the reduction in compressive strength) Fire Technol 28 3 1992 240 250 (Pubitemid 23566571)
13. R. Sarshar, and G.A. Khoury Material and environmental factors influencing the compressive strength of unsealed cement paste and concrete at high temperatures Mag Concrete Res 45 162 1993 51 61
14. L. Phan, and N. Carino Effect of test conditions and mixture proportions on behavior of high-strength concrete exposed to high temperatures ACI Mater J 99 1 2002 54 66
15. B. Persson Fire resistance of self-compacting concrete SCC Mater Struct 37 2004 575 584
16. B. Georgali, and P.E. Tsakiridis Microstructure of fire-damaged concrete-a case study Cem Concr Comp 27 2005 255 259
17. H.F.W. Taylor, C. Famy, and K.L. Scrivener Delayed ettringite formation Cem Concr Res 31 2001 683 693 (Pubitemid 32543519)
18. M. Castellote, C. Alonso, C. Andrade, Xavier Turrillas, and Javier Campo Composition and microstructural changes of cement pastes upon heating, as studied by neutron diffraction Cem Concr Res 34 2004 1633 1644
19. F.C. Lea, and R.E. Stradling The resistance to fire of concrete and reinforced concrete J Soc Chem Ind 41 18 1922 395 396
20. B. Demirel, and O. Kelestemur Effect of elevated temperature on the mechanical properties of concrete produced with finely ground pumice and silica fume Fire Safety J 45 2010 385 391
21. Noumowé A. Effet des hautes températures (20-600 C) sur le béton. PhD thesis. Institut National des Sciences Appliquées; 1995.
22. J. Piasta, Z. Sawicz, and L. Rudzinski Changes in the structure of hardened cement paste due to high temperature Mater et Constr 17 100 1984 291 296 (Pubitemid 15434589)
23. U. Schneider, U. Diederischs, and C. Ehm Effect of temperature on steel and concrete for PCRV's Nucl Eng Des 67 1981 245 258
24. W.M. Lin, T.D. Lin, and L.J. Powers-Couche Microstructures of fire-damaged concrete ACI Mater J 93 3 1996 199 205 (Pubitemid 126504612)
25. A. Petzold, and M. Rohr Concrete for high temperatures 1970 Maclaren and Sons London
26. S.N. Ghosh, S.L. Sarkar, and S. Harsh Mineral admixtures in cement and concrete S. Rehsi, 1993 ABI Books New Delhi 158 173
27. A.M. Neville Properties of concrete 4th ed. 1996 ELBS Longman London
28. C.J. Zega, and A.A. Di Maio Recycled concrete exposed to high temperatures Mag Concr Res 58 10 2006 675 682 (Pubitemid 44878550)
29. J.P. Ingham Application of petrographic examination technique to the assessment of fire-damaged concrete and masonry structures Mater Charact 60 2009 700 709
30. A.J. Newman The utilization of brick rubble from demolished shelters as aggregate for concrete Inst Municip Eng J 73 2 1946 113 121
31. M. Heikal Effect of temperature on the physico-mechanical and mineralogical properties of Homra pozzolanic cement pastes Cem Concr Res 30 2000 1835 1839 (Pubitemid 32092903)
32. C.M. Ho, and W.T. Tsai Recycled concrete using crushed construction waste bricks subject to elevated temperatures Adv Mater Res 152-153 2011 1 10
33. A.D. Campbell, and P.M. Desai Influence of aggregate on the behaviour of concrete at elevated temperatures Nucl Eng Des 6 1967 65 77
34. M.J. Terro Properties of concrete made with recycled crushed glass at elevated temperatures Build Environ 41 2006 633 639 (Pubitemid 43071552)
35. C.J. Zega, and A.A. Di Maio Recycled concrete made with different natural coarse aggregates exposed to high temperature Constr Build Mater 23 2009 2047 2052
36. J. Xiao, and C. Zhang Fire damage and residual strengths of recycled aggregate concrete Key Eng Mat 348-349 2007 937 940 (Pubitemid 47116828)
37. J.P.B. Vieira, J.R. Correia, and J. de Brito Post-fire residual mechanical properties of concrete made with recycled concrete coarse aggregates Cem Concr Res 41 2011 533 541
38. K. Eguchi, K. Teranishi, N. Akira, K. Hitoshi, S. Kimihiko, and N. Masafumi Application of recycled coarse aggregate by mixture to concrete construction Constr Build Mater 21 2007 1542 1551 (Pubitemid 46367583)
39. W.P.S. Dias, G.A. Khoury, and P.J.E. Sullivan Mechanical properties of hardened cement paste exposed to temperatures up to 700 C (1292 F) ACI Mater J 87 2 1990 160 165
40. S. Aydin, and B. Baradan Effect of pumice and fly ash incorporation on high temperature resistance of cement based mortars Cem Concr Res 37 2007 988 995 (Pubitemid 46817543)
41. J. Papayianni, and T. Valiasis Residual mechanical properties of heated concrete incorporating different pozzolanic materials Mater Struct 24 1991 115 121 (Pubitemid 21714876)
42. A. Savva, P. Manita, and K.K. Sideris Influence of elevated temperatures on the mechanical properties of blended cement concretes prepared with limestone and siliceous aggregates Cem Concr Comp 27 2005 239 248
43. Y. Xu, Y.L. Wong, C.S. Poon, and M. Anson Impact of high temperature on PFA concrete Cem Concr Res 31 2001 1065 1073 (Pubitemid 32698363)
44. F. Jia, H. Lv, Y. Sun, B. Cao, and S. Ding Effects of elevated temperatures on the compressive strength of HFCC Adv Mater Res 261-263 2011 416 420
45. H. TanyIldIzI, and A. Coşkun The effect of high temperature on compressive strength and splitting tensile strength of structural lightweight concrete containing fly ash Constr Build Mater 22 2008 2269 2275
46. Y. Xu, Y.L. Wong, C.S. Poon, and M. Anson Influence of PFA on cracking of concrete and cement paste after exposure to high temperatures Cem Concr Res 33 2003 2009 2016
47. Ravindrarajah RS, Lopez R, Reslan H. Effect of elevated temperature on the properties of high-strength concrete containing cement supplementary materials. In: The 9th international conference on durability of building materials and components, Brisbane, Australia; 2002.
48. C.S. Poon, S. Azhar, M. Anson, and Y.L. Wong Comparison of the strength and durability performance of normal and high-strength pozzolanic concretes at elevated temperatures Cem Concr Res 31 2001 1291 1300 (Pubitemid 34096858)
49. W.C. Tang, and T.Y. Lo Mechanical and fracture properties of normal and high-strength concretes with fly ash after exposure to high temperatures Mag Concr Res 61 5 2009 323 330
50. G.G. Carette, K.E. Painter, and V.M. Malhotra Sustained high temperatures effect on concretes made with normal Portland cement, normal Portland cement and slag, or normal Portland cement and fly ash Concr Int Des Constr 4 7 1982 41 51 (Pubitemid 12555409)
51. K.W. Nasser, and H.M. Marzouk Properties of mass concrete containing fly ash at high temperatures ACI J 76 4 1979 537 551
52. P.A. Jahren Fire resistance of high-strength/dense concrete with particular reference to the use of condensed silica fume: a review Proc Int Conf High-Strength Concr 114 1989 1013 1050
53. K.D. Hertz Danish investigations on silica fume concretes at elevated temperatures ACI Mater J 89 4 1992 345 347 (Pubitemid 23627338)
54. M.M. Morsy, S.S. Shebl, and A.M. Rashad Effect of fire on microstructure and mechanical properties of blended cement pastes containing metakaolin and silica fume Asian J Civil Eng (Building and Housing), ASCE 9 2 2008 93 105
55. M.S. Morsy, and S.S. Shebl Effect of silica fume and metakaolin pozzolana on the performance of blended cement pastes against fire J. Ceram Silikaty 51 1 2007 40 44 (Pubitemid 46718622)
56. N. Yuzer, F. Akoz, and L.D. Ozturk Compressive strength-color change relation in mortars at high temperature Cem Concr Res 34 2004 1803 1807
57. F. Aköz, N. Yüzer, and S. Koral The influence of high temperature on the physical and mechanical properties of ordinary Portland cement and silica fume mortar Turk Cham Civil Eng (Technical Journal-Digest 95) 6 1995 287 292 (Pubitemid 127052919)
58. K.I. Rahel, R. Kambiz, H. Roszilah, and R.T. Moh The Effect of high temperature on mortars containing silica fume J Appl Sci 11 2011 2666 2669
59. R. Felicetti, and P.G. Gambarova Effects of high temperature on the residual compressive strength of high strength siliceous concretes ACI Mater J 95 4 1998 395 406 (Pubitemid 128551040)
60. C.S. Poon, Z.H. Shui, and L. Lam Compressive behaviour of fiber reinforced high-performance concrete subjected to elevated temperature Cem Concr Res 34 12 2004 2215 2222
61. E. Sancak, Y.D. Sari, and O. Simsek Effects of elevated temperature on compressive strength and weight loss of the light-weight concrete with silica fume and superplasticizer Cem Concr Comp 30 2008 715 721
62. S.Y.N. Chan, G.F. Peng, and M. Anson Fire behaviour of high-performance concrete made with silica fume at various moisture contents ACI Mater J 96 3 1999 405 409
63. Hertz KD. Heat-induced explosion of dense concretes. Report No. 166, Institute of Building Design, Technical University of Denmark, Lyngby; 1984.
64. L.T. Phan, J.R. Lawson, and F.L. Davis Effects of temperature exposure on heating characteristics, spalling, and residual properties of high performance concrete Mater Struct 34 2001 83 91 (Pubitemid 33700765)
65. A. Behnood, and H. Ziari Effects of silica fume addition and water to cement ratio on the properties of high-strength concrete after exposure to high temperatures Cem Concr Comp 30 2008 106 112
66. A.N. Noumowé Temperature distribution and mechanical properties of high-strength silica-fume concrete at temperatures up to 200 C ACI Mater J 100 2003 326 330
67. J. Xiao, and H. Falkner On residual strength of high-performance concrete with and without polypropylene fibres at elevated temperatures Fire Safety J 41 2006 115 121
68. G. Sanjayan, and L.J. Stocks Spalling of high strength silica fume concrete in fire ACI Mater J 90 2 1993 170 173 (Pubitemid 23635493)
69. M. Saad, S.A. Abo-El-Eneini, G.B. Hanna, and M.F. Kotkatat Effect of temperature on physical and mechanical properties of concrete containing silica fume Cem Concr Res 26 5 1996 669 675 (Pubitemid 126405241)
70. A. Mendes, J. Sanjayan, and F. Collins Phase transformations and mechanical strength of OPC/slag pastes submitted to high temperatures Mater Struct 41 2008 345 350 (Pubitemid 351185650)
71. H.Y. Wang The effects of elevated temperature on cement paste containing GGBFS Cem Concr Comp 30 2008 992 999
72. M.M. Shoaib, S.A. Ahmed, and M.M. Balaha Effect of fire and cooling mode on the properties of slag mortars Cem Concr Res 31 2001 1533 1538 (Pubitemid 33149309)
73. S. AydIn Development of a high-temperature-resistant mortar by using slag and pumice Fire Safety J 43 2008 610 617
74. I. Netinger, I. Kesegic, and I. Guljas The effect of high temperatures on the mechanical properties of concrete made with different types of aggregates Fire Safety J 46 2011 425 430
75. I. Janotka, and L. Bagel Pore structures, permeabilities, and compressive strength of concrete at temperatures up to 800 C ACI Mater J 99 2 2002 196 200
76. J. Xiao, M. Xie, and C. Zhang Residual compressive behaviour of pre-heated high-performance concrete with blast furnace slag Fire Safety J 41 2006 91 98 (Pubitemid 43243184)
77. R. Siddique, and D. Kaur Properties of concrete containing ground granulated blast furnace slag (GGBFS) at elevated temperatures J Adv Res 3 1 2012 45 51
78. I. Soroka, and N. Stern Effect of calcareous fillers on sulfate resistance of Portland cement B Am Cer Soc 55 6 1976 594 595
79. C.T. Chen, J.J. Chang, W.C. Yeih, and S.T. Chang Sustainable performance of limestone cement Adv Mater Res 476-478 2012 1692 1696
80. Annerel E, Taerwe L, Vandevelde P. Assessment of temperature increase and residual strength of SCC after fire exposure. In: 5th International RILEM Symposium on SCC, Ghent, Belgium, 3-5 September; 2007. p. 715-720.
81. H. Fares, A. Noumowé, and S. Rémond Self-consolidating concrete subjected to high temperature: mechanical and physicochemical properties Cem Concr Res 39 2009 1230 1238
82. Ye G, De Schutter G, Taerwe L. Spalling behavior of small self-compacting concrete slabs under standard fire conditions. In: 5th RILEM Symposium on SCC, Ghent, Belgium, 3-5 September; 2007. p. 799-804.
83. H.W. Reinhardt, and M. Stegmaier Self-consolidating concrete in fire ACI Mater J 103 2 2006 130 135
84. N.M. Al-Akhras, K.M. Al-Akhras, and M.F. Attom Performance of olive waste ash concrete exposed to elevated temperatures Fire Safety J 44 2009 370 375
85. K.M.A. Hossain High strength blended cement concrete incorporating volcanic ash: performance at high temperatures J. Cem Concr Comp 28 2006 535 545
86. M. Heikal Effect of temperature on the structure and strength properties of cement pastes containing fly ash alone or in combination with limestone Ceram-Silikáty 50 3 2006 167 177 (Pubitemid 44770602)
87. S. Ghosh, and K. Nasser Effects of high temperature and pressure on strength and elasticity of lignite fly ash and siliceous fume concrete ACI Mater J 93 1 1996 51 60 (Pubitemid 126516185)