A study on the tribological characteristics of duplex-treated Ti-6Al-4V alloy under oil-lubricated sliding conditions

Tribology International

Volumn 64, Issue , 2013, Pages 155-163

  Amanov, Auezhan ^a   Sasaki, Shinya ^a  

^a TOKYO UNIVERSITY OF SCIENCE   (Japan)

Author keywords

DLC; Friction; Surface texturing; Ti 6Al 4V

Indexed keywords

DLC; FRICTION COEFFICIENTS; LASER SURFACE TEXTURING; SLIDING CONDITIONS; SURFACE-TEXTURING; TI-6AL-4V; TRIBOLOGICAL CHARACTERISTICS; UNBALANCED MAGNETRON SPUTTERING;

ALUMINUM; FRICTION; TITANIUM ALLOYS; TRIBOLOGY;

AMORPHOUS FILMS;

EID: 84876516278     PISSN: 0301679X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.triboint.2013.03.015     Document Type: Article

References (55)

1. C. Leyens, and M. Peters Titanium and titanium alloys 2003 KGaA, Weinheim, Germany: WILEY-VCH Verlag GmbH & Co.
2. M. Donachie Titanium: a technical guide 2000 ASM International Materials Park, OH
3. A. Amanov, I.S. Cho, D.E. Kim, and Y.S. Pyun Fretting wear and friction reduction of CP titanium and Ti-6Al-4V alloy by ultrasonic nanocrystalline surface modification Surface and Coatings Technology 207 2012 135 142
4. M. Masmoudi, M. Assoul, M. Wery, R. Abdelhedi, Halouani F.El., and G. Monteil Friction and wear behavior of CP Ti and Ti6Al4V following nitric acid passivation Applied Surface Science 253 2006 2237 2243 (Pubitemid 44791612)
5. J. Qu, P.J. Blau, T.R. Watkins, O.B. Cavin, and N.S. Kulkarni Friction and wear of titanium alloys sliding against metal, polymer, and ceramic counterfaces Wear 258 2008 1348 1356 (Pubitemid 40256864)
6. H. Ji, L. Xia, X. Ma, and Y. Sun Tribological performance of Ti-6Al-4V plasma-based ion implanted with nitrogen Wear 246 2000 40 45
7. Y.Q. Wang, G.F. Wu, Q.G. Han, L. Fang, and S.R. Ge Tribological properties of surface dimple-textured by pellet-pressing Procedia Earth and Planetary Science 1 2009 1513 1518
8. I. Etsion State of the art in laser surface texturing Journal of Tribology Transactions of the ASME 127 2005 248 253 (Pubitemid 40382712)
9. R. Zhou, J. Cao, Q.J. Wang, F. Meng, K. Zimowski, and Z.C. Xia Effect of EDT surface texturing on tribological behavior of aluminum sheet Journal of Materials Processing Technology 211 2011 1643 1649
10. A. Amanov, I.S. Cho, Y.S. Pyun, C.S. Lee, and I.G. Park Micro-dimpled surface by ultrasonic nanocrystal surface modification and its tribological effects Wear 286-287 2012 136 144
11. O.V. Penkov, Y.A. Bugayev, I. Zhuravel, V.V. Kondratenko, A. Amanov, and D.E. Kim Friction and wear characteristics of C/Si bi-layer coatings deposited on silicon substrate by DC magnetron sputtering Tribology Letters 48 2012 123 131
12. D.L. Pappas, and J. Hopwood Deposition of diamond-like carbon in a planar inductively coupled plasma Journal of Vacuum Science and Technology A 12 1994 1576 1581
13. J.J. Cuomo, J.P. Doyle, J. Bruley, and J.C. Liu Sputter deposition of dense diamond-like carbon films at low temperature Applied Physics Letters 58 1991 446 448
14. A. Erdemir, and C. Donnet Tribology of diamond-like carbon films: recent progress and future prospects Journal of Physics D: Applied Physics 39 2006 R311 R317
15. M. Ban, M. Ryoji, S. Fujii, and J. Fujioka Tribological characteristics of Si-containing diamond-like carbon films under oil-lubrication Wear 253 2002 331 338 (Pubitemid 35151308)
16. M. Grischke, K. Bewilogua, and H. Dimigen Preparation, properties and structure of metal containing amorphous hydrogenated carbon films Materials and Manufacturing Processes 8 1993 407 417 (Pubitemid 23704780)
17. A.A. Voevodin, C. Rebholz, and A. Matthews Comparative tribology studies of hard ceramic and composite metal-DLC coatings in sliding friction conditions Tribology Transactions 38 1995 829 836
18. A.M. Peters, and M. Nastasi Titanium-doped hydrogenated DLC coatings deposited by a novel OMCVD-PIIP technique Surface and Coatings Technology 167 2003 11 15 (Pubitemid 36310139)
19. C. Rincon, G. Zambrano, A. Carvajal, P. Prieto, H. Galindo, and E. Martinez Tungsten carbide/diamond-like carbon multilayer coatings on steel for tribological applications Surface and Coatings Technology 148 2001 277 283 (Pubitemid 34030036)
20. I. Etsion Improving tribological performance of mechanical components by laser surface texturing Tribology Letters 17 2004 733 737 (Pubitemid 39605194)
21. I. Etsion, and G. Halperin A laser surface textured hydrostatic mechanical seal Tribology Transactions 45 2002 430 434
22. N. Yasumaru, K. Miyazaki, and J. Kiuchi Control of tribological properties of diamond-like carbon films with femtosecond-laser-induced nanostructuring Applied Surface Science 254 2008 2364 2368 (Pubitemid 351178819)
23. D. Kim, K. Cha, I. Sung, and J. Bryan Design of surface microstructures for friction control in micro-system applications CIRP Annals 51 2002 495 498
24. A.A. Voevodin, and J.S. Zabinski Laser surface texturing, for adaptive solid lubrication Wear 261 2006 1285 1292 (Pubitemid 44738000)
25. Q. Ding, L. Wang, L. Hu, T. Hu, and Y. Wang The pairing-dependent effects of laser surface texturing on micro-tribological behavior of amorphous carbon film Wear 274-275 2012 43 49
26. J. Li, D. Xiong, H. Wu, Z. Huang, J. Dai, and R. Tyagi Tribological properties of laser surface texturing and molybdenizing duplex-treated Ni-base alloy Tribology Transactions 53 2010 195 202
27. Amanov A, Watabe T, Tsuboi R, Sasaki S. Fretting wear and fracture behaviors of Cr-doped and non-doped DLC films deposited on Ti-6Al-4V alloy by unbalanced magnetron sputtering Tribology International 2013;62:49-57.
28. W.C. Oliver, and G.M. Pharr An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments Journal of Materials Research 7 1992 1564 1583
29. B. Bhushan Nanotribology and Nanomechanics: An Introduction 2008 Springer Berlin
30. C.L. Wang, M. Zhang, and T.G. Nieh Nanoindentation creep of nanocrystalline nickel at elevated temperatures Journal of Physics D: Applied Physics 42 2009 115405 115412
31. W.B. Li, J.L. Henshall, R.M. Hooper, and K.E. Easterling The mechanism of indentation creep Acta Metallurgica et Materialia 39 1991 3099 3110
32. T.L. Oberle Properties influencing wear of metals Journal of Metals 3 1951 438 439
33. A. Leyland, and A. Matthews On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behavior Wear 246 2000 1 11
34. Amanov A, Watabe T, Sasaki S. Influence of dimples and nano-sized grains on the tribological characteristics of Cu-based alloy under oil-lubricated fretting conditions Journal of Nanoscience and Nanotechnology; in press
35. S. Zhang, D. Sun, Y. Fu, and H. Du Effect of sputtering target power on microstructure and mechanical properties of nanocomposite nc-TiN/a-SiNx thin film Thin Solid Films 447-448 2004 462 467
36. S. Zhang, D. Sun, Y. Fu, and H. Du Recent advances of superhard nanocomposite coatings: a review Surface and Coatings Technology 167 2003 113 119 (Pubitemid 36405647)
37. Ostrovskaya Ye.L., V.E. Strelnitskij, V.I. Kuleba, and G.D. Gamulya Friction and wear behavior of hard and superhard coatings at cryogenic temperatures Tribology International 34 2001 255 263 (Pubitemid 32317461)
38. J. Musil, F. Kunc, H. Zeman, and H. Polakova Relationships between hardness, Young's modulus and elastic recovery in hard nanocomposite coatings Surface and Coatings Technology 154 2002 304 313 (Pubitemid 34623557)
39. T.Y. Tsui, G.M. Pharr, W.C. Oliver, C.S. Bhatia, R.L. White, and S. Anders Nanoindentation and nanoscratching of hard carbon coatings for magnetic disks Materials Research Society Symposium Proceedings 383 1995 447 452
40. G.M. Pharr Measurement of mechanical properties by ultra-low load indentation Materials Science and Engineering: A 253 1998 151 159 (Pubitemid 128382708)
41. J. Jiang, S. Zhang, and R.D. Arnell The effect of relative humidity on wear of a diamond-like carbon coating Surface and Coatings Technology 167 2003 221 225 (Pubitemid 36400607)
42. A. Amanov, R. Tsuboi, H. Oe, and S. Sasaki The influence of bulges produced by laser surface texturing on the sliding friction and wear behavior Tribology International 60 2013 216 223
43. B. Bhushan Tribology and mechanics of magnetic storage devices 2nd ed. 1996 Springer Verleg New York
44. P.J. Blau Scale effects in sliding friction: an experimental study I.L. Singer, H.M. Pollock, Fundamentals of friction: macroscopic and microscopic processes vol. E220 1992 Kluwer Academic Dordrecht, Netherlands
45. S. Zhang, Y. Fu, H. Du, X.T. Zeng, and Y.C. Liu Magnetron sputtering of nanocomposite (Ti, Cr) CN/DLC coatings Surface and Coatings Technology 162 2002 42 48
46. J.C.A. Batista, C. Godoy, G. Pintaude, A. Sinatora, and A. Matthews An approach to elucidate the difference response of PVD coatings in different tribological tests Surface and Coatings Technology 174-175 2003 891 898 (Pubitemid 37060742)
47. A. Leyland, and A. Matthews Design criteria for wear-resistant nanostructured and glassy-metal coatings Surface and Coatings Technology 177-178 2004 317 324 (Pubitemid 38258913)
48. C. Donnet, and A. Erdemir Tribology of diamond-like carbon films 2008 New York: Springer
49. M. Yoshikawa Raman spectra of diamond-like amorphous carbon films Materials Science Forum 52-53 1989 365 386
50. M.C. Chiu, W.P. Hsieh, W.Y. Ho, D.Y. Wang, and F.S. Shieu Thermal stability of Cr-doped diamond-like carbon film synthesized by cathodic arc evaporation Thin Solid Films 476 2005 258 263
51. S. Kataria, S. Dhara, H.C. Barshilia, S. Dash, and A.K. Tyagi Evolution of coefficient of friction with deposition temperature in diamond like carbon thin films Journal of Applied Physics 112 2012 023525 023528
52. A.C. Ferrari, and J. Robertson Interpretation of Raman spectra of disordered and amorphous carbon Physical Review B: Condensed Matter 61 2000 14095 14107
53. J. Qi, J.B. Luo, S.Z. Wen, J. Wan, and W.Z. Li Mechanical and tribological properties of non-hydrogenated DLC films synthesized by IBAD Surface and Coatings Technology 128-129 2000 324 328
54. C. Casiraghi, A.C. Ferrari, and J. Robertson Raman spectroscopy of hydrogenated amorphous carbon Physical Review B: Condensed Matter 72 2005 085401 085404
55. S. Chowdhury, M.T. Laugier, and I.Z. Rahman Characterization of DLC coatings deposited by rf magnetron sputtering Journal of Materials Processing Technology 152-153 2010 804 810