Doubly Fed Induction Machine: Modeling and Control for Wind Energy Generation

Doubly Fed Induction Machine: Modeling and Control for Wind Energy Generation

Volumn , Issue , 2011, Pages

  Abad, Gonzalo ^a   López, Jesús ^a   Rodríguez, Miguel A ^a   Marroyo, Luis ^a   Iwanski, Grzegorz ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84874750199     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781118104965     Document Type: Book

References (279)

1. J. L. R. Amenedo, et al. Sistemas eólicos de producción de energi{dotless}á eléctrica. Rueda, 2003 (in Spanish).
2. I. Munteanu, I. U. Bratcu, N. A. Cutululis, and E. Ceanga, Optimal Control of Wind energy Systems. Springer, 2008.
3. M. Stiebler, Wind Energy Systems for Electric Power Generation. Springer, 2008.
4. E. Hau, Wind Turbines: Fundamentals, Technologies, Applications, Economics. Springer, 2000.
5. F Bianchi, Wind turbine control systems: principles, modelling & gain scheduling design, Springer, 2006.
6. M. P. Kazmierkowski, R. Krishnan, and F. Blaagberg, Control in Power Electronics Selected Problems. Academic Press, 2002.
7. F. Blaagberg and Z. Chen, Power Electronics for Modern Wind Turbines. Morgan & Claypool Publishers, 2006.
8. I. Boldea, Variable Speed Generators. CRC Press/Taylor & Francis, 2006.
9. I. Boldea, Synchronous Generators. CRC Press/Taylor & Francis, 2005.
10. T. Ackerman, Wind Power in Power Systems. Wiley, 2005.
11. H. Camblong, "Minimización del impacto de las perturbaciones de origen eólico sobre la producción de electricidad en aerogeneradores de velocidad variable." Ph.D. Thesis from University of Mondragon, 2003 (in French).
12. Math Bollen et al."Voltage Dip Immunity of Equipment and Installations", CIGRE Brochure 412, 2010.
13. J.A. Martinez-Velasco et al."Voltage dip Evaluation and Prediction Tools", CIGRE Brochure 372, 2009.
14. M. Santos, "Aportaciones al control centralizado de un parque eólico." Ph.D. Thesis from University of Mondragon, 2007 (in Spanish).
15. Catalogs from wind turbine manufacturers on the Internet.
16. M. P. Kazmierkowski, R. Krishnan, and F. Blaabjerg, Control in Power Electronics Selected Problems. Academic Press, 2002.
17. D. G. Holmes and T. A. Lipo, Pulse Width Modulation for Power Converters. JohnWiley & Sons. Inc., 2006.
18. B. K. Bose, Power Electronics and Drives. Elsevier, 2006.
19. B. Wu, High Power Converters and AC Drives. John Wiley & Sons. Inc., 2006.
20. N. Mohan, T. Undeland, and R. Robbins, Power Electronics. John Wiley & Sons. Inc., 1989.
21. W. Hart, Introduction to Power Electronics, Prentice Hall, 1997.
22. R. H. Park, Two Reactions Theory of Synchronous Machines. AIEE transactions. Vol 48, pp 716-730, 1902.
23. A. F. Moreira, T. A. Lipo, G. Venkataramanan, and S. Bernet, "Modeling and Evaluation of dv/dt Filters for AC Drives with High Switching Speed, "EPE 2001, Graz.
24. Mahesh M. Swany, and John A. Houdek, "Low Cost Motor Protection Techniques for Use with PWM Driven Machines, " MTE Corporation, Menomonee Falls, WI 53051. Intelligent Motion-June 1997 proceedings.
25. A. Fratta, G. M. Pellegrino, F. Scapino, and F.Villata, Cost-Effective Line Termination Net for IGBT PWM VSI AC Motor Drives. in Conf. ISIE, 2000.
26. G. Skibinski, R. Kerkman, D. Leggate, J. Pankau, and D. Schlegel, Reflected Wave Modeling Techniques for PWM AC Motor Drives. in Conf. APEC, 1998.
27. R. C. Portillo, M. M. Prats, J. I. Leon, J. A. Sanchez, J. M. Carrasco, E. Galvan, and L. G. Franquelo, "Modeling Strategy for Back-to-Back Three-Level Converters Applied to High-Power Wind Turbines, "IEEE Trans. Ind. Electron., Vol. 53, No. 5, pp. 1483-1491, October 2006.
28. J. Rodriguez, S. Bernet, W. Bin, J. O. Pontt, and S. Kouro,"Multilevel Voltage-Source-Converter Topologies for Industrial Medium-Voltage Drives, "IEEE Trans. Ind. Electron. Vol. 54, No. 6, pp. 2930-2945, December 2007.
29. S. Aurtenechea, M. A. Rodríguez, E. Oyarbide, and J. R. Torrealday,"Predictive Control Strategy for DC/AC Converters Based on Direct Power Control, "IEEE Trans. Ind. Electron., Vol. 54, No. 3, June 2007.
30. S. Bernet,"State of the Art and Developments of Medium Voltage Converters-An Overview, "International Conference on PELINCEC, 2005.
31. J. Pou, J. Zaragoza, P. Rodríguez, S. V. Ceballos, V. M. Sala, R. P. Burgos, and D. Boroyevich,"Fast-Processing Modulation Strategy for the Neutral-Point-Clamped Converter with Total Elimination of Low-Frequency Voltage Oscillations in the Neutral Point, "IEEE Trans. Ind. Electron., Vol. 54, No. 4, pp. 2288-2294, August 2007.
32. J. Pou, D. Boroyevich, and R. Pindado,"New Feedforward Space-Vector PWM Method to Obtain Balanced AC Output Voltages in a Three-Level Neutral-Point-Clamped Converter, "IEEE Trans. Ind. Electron., Vol. 49, No. 5, pp. 1026-1034, October 2002.
33. J. Rodriguez, S. Bernet, P. K. Steimer, and I. E. Lizama,"A Survey on Neutral-Point-Clamped Inverters, "IEEE Trans. Ind. Electron., Vol. 57, pp. 2219-2230, 2010.
34. S. Kouro, M. Malinowski, K. Gopakumar, G. Franquelo, J. Pou, J. Rodriguez, B.Wu, and A. Perez,"Recent Advances and Industrial Applications of Multilevel Converters, "IEEE Trans. Ind. Electron., Vol. 57, no. 8, pp. 2563-2580, 2010.
35. A. Nabae, I. Takahashi, and H. Akagi,"A New Neutral-Point-Clamped PWM Inverter, "IEEE Trans. Ind. Appl., Vol. IA-17, pp. 518-523, 1981.
36. J. Pou, R. Pindado, D. Boroyevich, and P. Rodriguez,"Limits of the Neutral-Point Balance in Back-to-Back-Connected Three-Level Converters, "IEEE Trans. Power Electron., Vol. 19, pp. 722-731, 2004.
37. M. Hiller, D. Krug, R. Sommer, and S. Rohner,"A New Highly Modular Medium Voltage Converter Topology for Industrial Drive Applications, "in 13th European Conference on Power Electronics and Applications (EPE '09) 2009, pp. 1-10.
38. T. A. Meynard, H. Foch, F. Forest, C. Turpin, F. Richardeau, L. Delmas, G. Gateau, and E. Lefeuvre,"Multicell Converters: Derived Topologies, "IEEE Trans. Ind. Electron, Vol. 49, pp. 978-987, 2002.
39. R. Marquardt,"Current Rectification Circuit for Voltage Source Inverters with Separate Energy Stores Replaces Phase Blocks with Energy Storing Capacitors, "German Patent (DE10103031A1) 25 July 2002.
40. S. Allebrod, R. Hamerski, and R. Marquardt,"New Transformerless, Scalable Modular Multilevel Converters for HVDC-Transmission, "in IEEE Power Electronics Specialists Conference, pp. 174-179, June 2008.
41. S. J. Chapman, Electrical Machines. McGraw Hill, 1985.
42. J. F. Mora, Electrical Machines. McGraw Hill, 2003.
43. I. Boldea, Variable Speed Generators. CRC Press Taylor & Francis, 2006.
44. I. Boldea and A. Nasar, The Induction Machine Handbook. CRC Press, 2006.
45. B. K. Bose, Modern Power Electronics and AC Drives, Prenctice Hall, 2002.
46. W. Leonhard, Control of Electrical Drives. Springer-Verlag, 1985.
47. B. K. Bose, Power Electronics and Motor Drives. Elsevier, 2006.
48. M. P. Kazmierkowski, R. Krishnan, and F. Blaabjerg, Control in Power Electronics: Selected Problems. Academic Press, 2002.
49. P. Vas, Sensorless Vector and Direct Torque Control. Oxford University Press, 1998.
50. A. Veltman, D. W. J. Pulle, and R. W. De Doncker, Fundamentals of Electric Drives. Springer, 2007.
51. A. M. Trzynadlowski, Control of Induction Motors. Academic Press, 2001.
52. A. Hughes, Electric Motors and Drives. Elsevier, 1990.
53. M. Barnes, Variable Speed Drives and Power Electronics. Elsevier, 2003.
54. R. Datta,"Rotor Side Control of Grid-ConnectedWound Rotor Induction Machine and Its Application toWind Power Generation." Ph.D. thesis, Department of Electrical Engineering, Indian Institute of Science, Bangalore, India, February 2000.
55. A. Peterson."Analysis, Modeling and Control of Doubly-Fed Induction Generators for Wind Turbines." Ph.D. thesis, Chalmers University of Technology, Goteborg, Sweden, 2005.
56. I. Boldea, Variable Speed Generators. CRC Press Taylor & Francis, 2006.
57. I. Boldea and A. Nasar, The Induction Machine Handbook. CRC Press, 2006.
58. W. Leonhard, Control of Electrical Drives. Springer-Verlag, 1985.
59. M. P. Kazmierkowski, R. Krishnan, and F. Blaabjerg, Control in Power Electronics: Selected Problems. Academic Press, 2002.
60. P. Vas, Sensorless Vector and Direct Torque Control. Oxford University Press, 1998.
61. R. H. Park, Two Reactions Theory of Synchronous Machines. AIEE Transactions. Vol. 48, pp. 716-730, 1928.
62. A. Veltman, D. W. J. Pulle, and R.W. De Doncker, Fundamentals of Electric Drives. Springer, 2007.
63. B. K. Bose, Power Electronics and Drives. Elsevier, 2006.
64. A. M. Trzynadlowski, Control of Induction Motors. Academic Press, 2001.
65. A. Hughes, Electric Motors and Drives. Elsevier, 1990.
66. M. Barnes, Variable Speed Drives and Power Electronics. Elsevier, 2003.
67. S. J. Chapman, Electrical Machines. McGraw Hill, 1985.
68. J. F. Mora, Electrical Machines. McGraw Hill, 2003.
69. A. Peterson,"Analysis, Modeling and Control of Doubly-Fed Induction Generators for Wind Turbines." Ph.D. thesis, Chalmers University of Technology, Goteborg, Sweden, 2005.
70. S. J. Chapman, Electrical Machines. McGraw Hill, 1985.
71. J. F. Mora, Electrical Machines. McGraw Hill, 2003.
72. Institute of Electrical and Electronics Engineers (IEEE), IEEE Standard Procedure for Polyphase Induction Motors and Generators, IEEE Standard 112-1996. IEEE Press, 1996.
73. I. Boldea, Variable Speed Generators. CRC Press/Taylor & Francis, 2006.
74. I. Boldea and A. Nasar, The Induction Machine Handbook. CRC Press, 2006.
75. E. Levi,"Impact of Iron Loss on Behavior of Vector Controlled Induction Machines, "IEEE Trans. Ind. Appl., Vol. 31, No. 6, December 1995.
76. E. Levi, M. Sokola, A. Boglietti, and M. Pastorelli,"Iron Loss in Rotor-Flux-Oriented Induction Machines: Idenfitication, Assessment of Detuning and Compensation, "IEEE Trans. Power Electron., Vol. 11, No. 5, September 1996.
77. E. Levi and S. N. Vukosavic,"Identification of the Magnetising Curve During Commissioning of a Rotor Flux Oriented Induction Machine, "IEEE Proc. Power Appl., Vol. 146, No. 6, November 1999.
78. S. Heikkila and M. Vertanen,"Method for Estimating the Sum of Stator and Rotor Resistances, "U.S. Patent, August 2007, ABB Oy.
79. G. Pace,"Rotor Resistance Estimation by Calibrated Measurement of Stator Temperature, "U.S. Patent, March 2005.
80. S. Royak, M. M. Harbaugh, and R. J. Kerkman,"Stator and Rotor Identifier Using High Frequency Injection, "U.S. Patent, October 2003, Rockwell Automation Technologies.
81. A. C. Smith, R. C. Healey, and S. Williamson,"A Transient Induction Motor Model Including Saturation and Deep Bar Effect, "IEEE Trans. Energy Conversion, Vol. 11, No. 1, March 1996.
82. R. C. Healey, S. Williamson, and A. C. Smith,"Improved Cage Rotor Models for Vector Controlled Induction Motors, "IEEE Trans. Ind. Appl., Vol. 31, No. 4, July/August 1995.
83. F. Profumo, G. Griva,M. Pastorelli, and J. C. Moreira,"Universal Field Oriented Controller Based on Air Gap Flux Sensing via Third Harmonic Stator Voltage, "IEEE Trans. Ind. Appl., Vol. 30, No. 2, pp. 448-455, 1994.
84. J. S. Hsu, S. P. Liou, B. T. Lin, andW. F.Weldon,"Losses Influenced by Third-Harmonic Flux in Induction Motors, "IEEE Trans. Energy Conversion, Vol. 6, No. 3, pp. 461-468, September 1991.
85. L. Kreindler, J. C. Moreira, A. Testa, and T. A. Lipo,"Direct Field Orientation Controller Using the Stator Phase Voltage Third Harmonic, "IEEE Trans. Ind. Appl., Vol. 30, No. 2, pp. 441-447, 1994.
86. J. B. Ekanayake, L. Holdsworth, X. G.Wu, and N. Jenkins,"Dynamic Modeling of Doubly Fed Induction Generator Wind Turbines, "IEEE Trans. Power Systems, Vol. 18, No. 2, pp. 803-809, May 2003.
87. A. Perdana, O. Carlson, and J. Persson,"Dynamic Response of Grid-Connected Wind Turbine with Doubly Fed Induction Generator During Disturbances, "NordicWorkshop on Power and Industrial Electronics, Trondheim, Norway, 2004.
88. S. Seman, J. Niiranen, S. Kanerva, A. Arkkio, and J. Saitz,"Performance Study of a Double FedWind-Power Induction Generator Under Network Disturbances, "IEEE Trans. Energy Conversion, Vol. 21, No. 4, pp. 883-890, December 2006.
89. J. Morren and S.W. H. de Haan,"Short-Circuit Current ofWind Turbines with Doubly Fed Induction Generator, "IEEE Trans. Energy Conversion, Vol. 22, No. 1, pp. 174-180, March 2007.
90. John Godsk Nielsen(Vestas),"Method for Controlling a Power-Grid Connected Wind Turbine Generator During Grid Faults and Apparatus for Implementing Said Method, "Worldwide Patent No. WO2004070936 August 2004.
91. Lorenz Feddersen(Vestas Wind Systems),"Circuit to Be Used in a Wind Power Plant, "U.S. Patent No. US7102247 September 2006.
92. Joho Reinhard(Alstom),"Method for Operating a Power Plant, "U.S. Patent No: US6239511 May 2001 and European Patent No: EP0984552 July 1999.
93. A. Stoev, and A. Dittrich(Diltec),"Generator System Having a Generator that Is Directly Coupled to the Mains, and Method for Controlling Mains Interruptions, "European Patent No. EP1561275 July 2008.
94. J. I. Llorente and M. Visiers(Gamesa Innovation & Technology),"Method and Device for Preventing the Disconnection of an Electric Power Generating Plant from the Electric Grid, "European Patent Application No: EP1803932 July 2007.
95. J. B. Ekanayake, L. Holdsworth, and N. Jenkins,"Comparison of 5th Order and 3rd Order Machine Models for Doubly Fed Induction Generator (DFIG) Wind Turbines, "Elect. Power Systems Res., Vol. 67, pp. 207-215, December 2003.
96. A. Petersson, T. Thiringer, L. Harnefors, and T. Petru,"Modeling and Experimental Verification of Grid Interaction of a DFIG Wind Turbine", IEEE Trans. Energy Conversion, Vol. 4, No. 4, pp. 878-886, December 2005.
97. Longya Xu and Wei Cheng,"Torque and Reactive Power Control of a Doubly Fed Induction Machine by Position Sensorless Scheme, "IEEE Trans. Ind. Appl. Vol. 31, No. 3, pp. 636-642, May/June 1995.
98. B. Hopfensperger, D. Atkinson, and R. A. Lakin,"Stator-Flux-Oriented Control of a Doubly-Fed Induction Machine with and Without Position Encoder, "IEE Proc. Electric Power Appl., Vol. 146, No. 6, pp. 597-605, November 1999.
99. R. Datta and V. T. Ranganathan,"Decoupled Control of Active and Reactive Power for a Grid-Connected Doubly-FedWound Rotor Induction MachineWithout Position Sensors, "in Proceedings IEEE Industry Applications Conference, Vol. 4, Phoenix, USA, October 1999, pp. 2623-2628.
100. S.Wang andY. Ding,"Stability Analysis of Field Oriented Doubly-Fed Induction Machine Drive Based on Computer Simulation, "Electric Machines and Power Systems, Vol. 21, pp. 11-24, January/February 1993.
101. W. Leonhard, Control of Electrical Drives. Springer-Verlag, 1996.
102. R. Pena, J. C. Clare, and G. M. Asher,"Doubly Fed Induction Generator Using Back-to-Back PWM Converters and Its Application to Variable-Speed Wind Energy Generation, "IEE Proc. Electric Power Appl. Vol. 143, pp. 231-241, May 1996.
103. V. Kaura and V. Blasko,"Operation of a Phase Locked Loop System Under Distorted Utility Conditions, "IEEE Trans. Ind. Appl., Vol. 33, No. 1, pp. 58-63, January 1997.
104. R. Datta and V. T. Ranganathan,"Decoupled Control of Active and Reactive Power for a Grid-Connected Doubly-FedWound Rotor Induction MachineWithout Position Sensors, "in Proceedings IEEE Industry Applications Conference, Vol. 4, Phoenix, AZ, October 1999, pp. 2623-2628.
105. A. Perdana, O. Carlson, and J. Persson,"Dynamic Response of Grid-Connected Wind Turbine with Doubly Fed Induction Generator During Disturbances, "in Nordic Workshop on Power and Industrial Electronics, Trondheim, Norway, 2004.
106. J. B. Ekanayake, L. Holdsworth, X. G.Wu, and N. Jenkins,"Dynamic Modeling of Doubly Fed Induction Generator Wind Turbines, "IEEE Trans. Power Systems, Vol. 18, No. 2, pp. 803-809, May 2003.
107. M. Heller and W. Schumacher,"Stability Analysis of Doubly-Fed Induction Machines in Stator Flux Reference Frame, "in Proceedings 7th European Conference Power Electronics and Applications, Vol. 2, Tronheim, Norway, 8-10 September 1997, pp. 707-710.
108. L. Congwei, W. Haiqing, S. Xudong, and L. Fahai,"Research of Stability of Doubly Fed Induction Motor Vector Control System, "in Proceedings 5th International Conference on Electrical Machines and Systems, Vol. 2, Shenyang, China, 18-20 August 2001, pp. 1203-1206.
109. A. Petersson, L. Harnefors, and T. Thiringer,"Comparision Between Stator-Flux and Grid-Flux-Oriented Rotor Current Control of Doubly-Fed Induction Generators, "in Proceedings 35th Power Electronics Specialist Conference, Vol. 1, Aachen, Germany, 20-25 June 2004, pp. 482-486.
110. A. Petersson, T. Thiringer, L. Harnefors, and T. Petru,"Modeling and Experimental Verification of Grid Interactions of a DFIG Wind Turbine, "Trans. Energy Conversion, Vol. 20, No. 6, pp. 878-886, December 2005.
111. P. L. Jansen and R. D. Lorenz,"A Physically Insightful Approach to the Design and Accuracy Assessment of Flux Observers for Field Oriented Induction Machine Drives, "IEEE Trans. Ind. Appl., Vol. 30, pp. 101-110, January/February 1994.
112. M. Elbuluk, N. Langovsky, and M. D. Kankam,"Design and Implementation of a Closed-Loop Observer and Adaptive Controller for Induction Motor Drives, "IEEE Trans. Ind. Appl., Vol. 34, pp. 435-443, May/June 1998.
113. D. Xiang, L. Ran, P.Tavner, and S.Yang,"Control of a Doubly Fed Induction Generator in a Wind Turbine During Grid Fault Ride-Through, "IEEE Trans Energy Conversion, Vol. 21, No. 3, pp. 652-662, September 2006.
114. J. Lopez, P. Sanchis, E. Gubia, A. Ursua, L. Marroyo, and X. Roboam,"Control of Doubly Fed Induction Generator Under Symmetrical Voltage Dips, "Record of ISIE08, Cambridge, UK, July 2008.
115. L. Xu and Y. Wang,"Dynamic Modeling and Control of DFIG-Based Wind Turbines Under Unbalanced Network Conditions, "IEEE Trans. Power Systems, Vol. 22, No. 1, pp. 314-323, February 2007.
116. H. Song and K. Nam,"Dual Current Control Scheme for PWM Converter Under Unbalanced Input Voltage Conditions, "IEEE Trans. Ind. Electron., Vol. 46, No. 5, pp. 953-959, October 1999.
117. J. Svensson, M. Bongiorno, and A. Sannino,"Practical Implementation of Delayed Signal Cancellation Method for Phase-Sequence Separation, "IEEE Trans. Power Delivery, Vol. 22, No. 1, pp. 18-26, January 2007.
118. Lie Xu,"Enhanced Control and Operation of DFIG-Based Wind Farms During Network Disturbances, "IEEE Trans. Energy Conversion, Vol. 23, No. 4, pp. 1073-1081, December 2008.
119. Y. Suh and T. A. Lipo,"Control Scheme in Hybrid Synchronous Stationary Frame for PWM AC/DC Converter Under Generalized Unbalanced Operating Conditions", IEEE Trans. Ind. Appl., Vol. 42, No. 3, pp. 825-835, May/June 2006.
120. W. Leonhard, Control of Electrical Drives. Springer-Verlag, 1985.
121. M. P. Kazmierkowski, R. Krishnan, and F. Blaabjerg, Control in Power Electronics: Selected Problems. Academic Press, 2002.
122. I. Boldea and S. A. Nasar, Vector Control of AC Drives. CRC Press, 1992.
123. P. Vas, Sensorless Vector and Direct Torque Control. Oxford University Press, 1998.
124. N. Mohan, T. Undeland and R. Robbins, Power Electronics. John Wiley & Sons. Inc. 1989.
125. A. Veltman, D. W. J. Pulle, and R. W. De Doncker, Fundamentals of Electric Drives. Springer, 2007.
126. B. K. Bose, Power Electronics and Motor Drives. Elsevier, 2006.
127. A. M. Tryznadlowski, Control of Induction Motors. Academic Press, 2001.
128. A. Hughes, Electric Motors and Drives. Elsevier, 1990.
129. M. Barnes, Variable Speed Drives and Power Electronics. Elsevier, 2003.
130. I. Boldea, Variable Speed Generators. CRC Press/Taylor & Francis, 2006.
131. I. Boldea and S. A. Nasar, The Induction Machine Handbook. CRC Press, 2006.
132. F. Blaschke,"A New Method for the Structural Decoupling of A.C. Induction Machines, "in Conf. Rec. IFAC, Dusselrdorf, Germany, October 1971.
133. I. Takahashi and Y. Ohmori,"High-Performance Direct Torque Control of an Induction Motor, "IEEE Trans. Ind. Appl., Vol. 25, pp. 257-264, March/April 1989.
134. I. Takahashi and T. Noguchi,"A New Quick Response and High Efficiency Control Strategy of an Induction Motor, "IEEE Trans. Ind. Appl., Vol. IA-22 pp. 820-827, September/October 1986.
135. M. Depenbrock,"Direct Self-control (DSC) of Inverter-Fed Induction Machine, "IEEE Trans. Power Electron., Vol. 3, pp. 420-429, October 1988.
136. D. Casadei, F. Profumo, G. Serra, and A. Tani,"FOC and DTC: Two Viable Schemes for Induction Motors Torque Control, "IEEE Trans. Power Electron., Vol. 17, No. 5, pp. 779-787, September 2002.
137. E. Flach, R. Hoffmann, and P. Mutschler,"Direct Mean Torque Control of an Induction Motor, "in Proceedings EPE'97 Conference, 1997.
138. D. Casadei, G. Serra, and K. Tani,"Implementation of a Direct Control Algorithm for Induction Motors Based on Discrete Space Vector Modulation, "IEEE Trans. Power Electron., Vol. 15, No. 4, pp. 769-777, July 2000.
139. J. K. Kang and S.K. Sul,"New Direct Torque Control of Induction Motor for Minimum Torque Ripple and Constant Switching Frequency, "IEEE Trans. Ind. Appl., Vol. 35, No.5, pp. 1076-1086, September/October 1999.
140. K. B. Lee, J.-H. Song, I. Choy, and J.-Y. Yoo,"Improvement of Low-Speed Operation Performance of DTC for Three-Level Inverter-Fed Induction Motors, "IEEE Trans. Ind. Electron., Vol. 48, No. 5, pp. 255-264, October 2001.
141. C. A. Martins, X. Roboam, T. A. Meynard, and A. S. Carvalho,"Switching Frequency Imposition and Ripple Reduction in DTC Drives by Using a Multilevel Converter, "IEEE Trans. Power Electron., Vol. 17, No. 2, pp. 286-297, March 2002.
142. J. Rodríguez, J. Pontt, S. Kouro, and P. Correa,"Direct Torque Control with Imposed Switching Frequency in an 11-Level Cascaded Inverter, "IEEE Trans. Ind. Electron., Vol. 51, No. 4, pp. 827-833, August 2004.
143. S. Kouro, R. Bernal, H. Miranda, C. A. Silva, and J. Rodríguez,"High-Performance Torque and Flux Control for Multilevel Inverter Fed Induction Motors, "IEEE Trans. Power Electron., Vol. 22, No. 6, pp. 2116-2123, November 2007.
144. K. Hatua and V. T. Ranganathan,"Direct Torque Control Schemes for Split-Phase Induction Machine, "IEEE Trans. Ind. Appl., Vol. 41, No. 5, pp. 1243-1254, September/October 2005.
145. F. Morel, J. M. Retif, X. Lin-Shi, and A. M. Llor,"Fixed Switching Frequency Hybrid Control for a Permanent Magnet Synchronous Machine, "in Proceedings IEEE ICIT'04 Conference, 2004.
146. M. Pacas and J. Weber,"Predictive Direct Torque Control for the PM Synchronous Machine, "IEEE Trans. Ind. Electron., Vol. 52, No. 5, pp. 1350-1356, October 2005.
147. Z. Xu and M. F. Rahman,"Direct Torque and Flux Regulation of an IPM Synchronous Motor Drive Using Variable Structure Control Approach, "IEEE Trans. Power Electron., Vol. 22, No. 6, pp. 2487-2498, November 2007.
148. I. Sarasola, J. Poza, M. A. Rodríguez, and G. Abad,"Predictive Direct Torque Control of Brushless Doubly Fed Machine with Reduced Torque Ripple at Constant Switching Frequency, "in Proceedings IEEE ISIE'07 Conference, 2007.
149. K. P. Gokhale, et al.,"Controller for aWound Rotor Induction Machine, "U.S. Patent 1999.
150. S. Aurtenechea, M. A. Rodríguez, E. Oyarbide, and J. R. Torrealday,"Predictive Control Strategy for DC/AC Converters Based on Direct Power Control, "IEEE Trans. Ind. Electron., Vol. 54, No. 3, pp. 1261-1271, June 2007.
151. R. Vargas, P. Cortés, U. Ammann, J. Rodríguez, and J. Pontt,"Predictive Control of a Three-Phase Neutral-Point-Clamped Inverter, "IEEE Trans. Ind. Electron., Vol. 54, No. 5, pp. 2697-2705, October 2007.
152. R. Pena, J. C. Clare, and G. M. Asher,"Doubly Fed Induction Generator Using Back-to-Back PWM Converters and Its Application to Variable-Speed Wind-Energy Generation, "Proc. IEE Electric Power Appl., Vol. 143, No. 3, pp. 231-241, May 1996.
153. S. A. Gomez and J. L. R Amenedo,"Grid Synchronization of Doubly Fed Induction Generators Using Direct Torque Control, "in Proceedings IEEE IECON'02 Conference, 2002.
154. R. Datta and V. T. Ranganathan,"Direct Power Control of Grid-Connected Wound Rotor Induction Machine Without Rotor Position Sensors, "IEEE Trans. Power Electron., Vol. 16, No. 3, pp. 390-399, May 2001.
155. L. Xu and P. Cartwright,"Direct Active and Reactive Power Control of DFIG for Wind Energy Generation, "IEEE Trans. Energy Conversion, Vol. 21, No. 3, pp. 750-758, September 2006.
156. G. Abad, M. A. Rodríguez, and J. Poza,"Predictive Direct Power Control of the Doubly Fed Induction Machine with Reduced Power Ripple at Low Constant Switching Frequency, "in Proceedings IEEE ISIE'07 Conference, 2007.
157. A. Linder and R. Kennel,"Direct Model Predictive Control-A New Direct Predictive Control Strategy for Electrical Drives, "in Proceedings EPE'05 Conference, 2005.
158. Z. Sorchini and P. T. Krein,"Formal Derivation of Direct Torque Control for Induction Machines, "IEEE Trans. Power Electron., Vol. 21, No. 5, pp. 1428-1436, September 2006.
159. A. K. Jain, S. Mathapati, V. T. Ranganathan, and V. Narayanan,"Integrated Starter Generator for 42-V Power Net Using Induction Machine and Direct Torque Control Technique, "IEEE Trans. Power Electron., Vol. 21, No. 3, pp. 701-710, May 2006.
160. G. Abad, M. A. Rodríguez, and J. Poza,"Two Level VSC Based Predictive Direct Torque Control of the Doubly Fed Induction Machine with Reduced Torque and Flux Ripples at Low Constant Switching Frequency, "IEEE Trans. Power Electron., Vol. 23, No. 3, May 2008.
161. G. Abad, M. A. Rodríguez, and J. Poza,"Two Level VSC Based Predictive Direct Power Control of the Doubly Fed Induction Machine with Reduced Power Ripple at LowConstant Switching Frequency, "IEEE Trans. Energy Conversion, Vol. 23, No. 2, pp. 570-580, June 2008.
162. G. Abad, M. A. Rodríguez, and J. Poza,"Three Level NPC Converter Based Predictive Direct Power Control of the Doubly Fed Induction Machine at Low Constant Switching Frequency, "IEEE Trans. Ind. Electron., Vol. 55, No. 12, pp. 4417-4429, 2008.
163. G. Abad, M. A. Rodriguez, G. Iwanski, and J. Poza,"Direct Power Control of Doubly-Fed-Induction-Generator-BasedWind Turbines Under Unbalanced GridVoltage, "IEEE Trans. Power Electron., Vol. 25, No. 2, pp. 442-452, February 2010.
164. J. Pou, D. Boroyevich, and R. Pindado,"New Feedforward Space-Vector PWMMethod to Obtain Balanced AC Output Voltages in a Three-Level Neutral-Point-Clamped Converter, "IEEE Trans. Ind. Electron., Vol. 49, No. 5, pp. 1026-1034, October 2002.
165. G. Abad, M. A. Rodriguez, J. Poza, and J. M. Canales,"Direct Torque Control for Doubly Fed Induction Machine-Based Wind Turbines Under Voltage Dips and Without Crowbar Protection, "IEEE Trans. Energy Conversion, Vol. 24, No. 3, pp. 586-588, 2010.
166. M. Bobrowska-Rafal, K. Rafal, G. Abad, and M. Jasinski,"Control of PWM Rectifier Under Grid Voltage Dips, "Bull. Polish Acad. Sci. Vol. 57, No. 4, 2009.
167. R. Peña, R. Cardenas, E. Escobar, J. Clare, and P. Wheeler,"Control System for Unbalanced Operation of Stand-Alone Doubly Fed Induction Generators, "IEEE Trans. Energy Conversion, Vol. 22, No. 2, pp. 544-545, June 2007.
168. G. Iwánski and W. Koczara,"Sensorless Direct Voltage Control of the Stand-Alone Slip-Ring Induction Generator, "IEEE Trans. Ind. Electron., Vol. 54, No. 2. pp. 1234-1236, April 2007.
169. T. K. A. Brekken and N. Mohan,"Control of a Doubly Fed Induction Wind Generator Under Unbalanced Grid Voltage Conditions, "IEEE Trans. Energy Conversion, Vol. 22, No. 1, pp. 129-135, March 2007.
170. L. XuandY.Wang,"Dynamic Modeling and Control of DFIG-BasedWindTurbines Under Unbalanced Network Conditions, "IEEE Trans. Power Syst., Vol. 22, No. 1, pp. 314-323, February 2007.
171. C. J. Ramos, A. P. Martins, and A. S. Carvalho,"Rotor Current Controller with Voltage Harmonics Compensation for a DFIG Operating Under Unbalanced and Distorted Stator Voltage, "in Conference IECON, 2007.
172. D. Santos-Martin, J. L. Rodriguez-Amenedo, and S. Arnalte,"Direct Power Control Applied to Doubly Fed Induction Generator Under Unbalanced Grid Voltage Conditions, "IEEE Trans. Power Electron., Vol. 23, No. 5, pp. 2328-2336, September 2008.
173. D. Santos-Martin, J. L. Rodriguez-Amenedo, and S. Arnalte,"Dynamic Programming Power Control for Doubly Fed Induction Generators, "IEEE Trans. Power Electron, Vol. 23, No. 5, pp. 2337-2345, September 2008.
174. S. Seman, J. Niiranen, S. Kanerva, A. Arkkio, and J. Saitz,"Performance Study of a Doubly FedWind-Power Induction Generator Under Network Disturbances, "IEEE Trans. Energy Conversion, Vol. 21, No. 4, pp. 883-890, December 2006.
175. S. Dominguez Rubira and M. D. McCulloch,"Control Method Comparison of Doubly Fed Wind Generators Connected to the Grid by Asymmetric Transmission Lines, "IEEE Trans. Ind. Appl., Vol. 36, No. 4, pp. 986-991, July/August 2000.
176. M. Chomat, J. Bendl, and L. Schreier,"Extended Vector Control of Doubly Fed Machine Under Unbalanced Power Network Conditions, "in International Conference on Power Electronics Machines and Drives, 2002, pp. 329-334.
177. J. Lopez, E. Gubia, P. Sanchis, X. Roboam, and L. Marroyo,"Wind Turbines Based on Doubly Fed Induction Generator Under AsymmetricalVoltage Dips, "IEEE Trans. Energy Conversion, Vol. 23, No. 1, March 2008.
178. L. Xu,"Coordinated Control of DFIG's Rotor and Grid Side Converters During Network Unbalance, "IEEE Trans. Power Electron, Vol. 23, No. 3, May 2008.
179. J. Yao, H. Li, Y. Liao, and Z. Chen,"An Improved Control Strategy of Limiting the DCLinkVoltage Fluctuation for a Doubly Fed InductionWind Generator, "IEEE Trans. Power Electron, Vol. 23, No. 3, May 2008.
180. P. Rioual, H. Pouliquen, and J. P. Louis,"Regulation of aPWMRectifier in the Unbalanced Network State Using a Generalized Model, "IEEE Trans. Power Electron, Vol. 11, No. 3, pp. 495-502, May 1996.
181. H. S. Song and K. Nam,"Dual Current Control Scheme for PWM Converter Under Unbalanced Input Voltage Conditions, "IEEE Trans. Ind. Electron, Vol. 46, No. 5, pp. 953-959, October 1999.
182. I. Etxeberria-Otadui, U. Viscarret, M. Caballero, A. Rufer, and S. Bacha,"New Optimized PWM VSC Control Structures and Strategies Under Unbalanced Voltage Transients, "IEEE Trans. Ind. Electron, Vol. 54, No. 5, pp. 2902-2914, October 2007.
183. J. Eloy-García, S. Arnaltes, and J. L. Rodríguez-Amenedo,"Direct Power Control of Voltage Source Inverters with Unbalanced Grid Voltages, "IET Power Electron., Vol. 1, No. 3, pp. 395-407, September 2008.
184. T. Noguchi, H. Tomiki, S. Kondo, and I. Takahashi,"Direct Power Control of PWM Converter Without Power-Source Voltage Sensors, "IEEE Trans. Ind. Appl., Vol. 34, pp. 473, May/June 1998.
185. C. Fortescue,"Method of Symmetrical Coordinates Applied to the Solution of Polyphase Networks, "Trans. Am. Inst. Elect. Eng., Vol. 37, No. Part II, pp. 1027-1140, June 1918.
186. J. M. Rodríguez et al.,"Incidence on Power System Dynamics of High Penetration of Fixed Speed and Doubly Fed Wind Energy Systems. Study of the Spanish Case, "IEEE Trans. Power Syst., Vol. 17, No. 4, pp. 1089-1095, November 2002.
187. Union for the Co-ordination of Transmission of Electricity,"Final Report on the Disturbances on 4 November 2006, "available at: http://www.ucte.org/publications/otherreports.
188. "PO 12.3: Requisitos de respuesta frente a huecos de tensión de las instalaciones eólicas, "Red Eléctrica Española, Spain, January 2000, available at http://www.aeeolica.es/doc/privado/procedimiento_verificacion_v3.pdf.
189. Technical guidelines (Technische Richtlinien), F€ordergesellschaft Windenergie e.V, Germany, available at http://www.wind-fgw.de/.
190. The Grid Code, Connection Conditions (CC), National Grid, UK, available at http://www.nationalgrid.com/uk/Electricity/Codes/gridcode/gridcodedocs/.
191. Requirements for the Interconnection of Distribution Generation to the Hydro-Québec Medium-Voltage Distribution System, Hydro-Québec, Canada, available at http://www.hydroquebec.com/transenergie/fr/commerce/producteurs_prives.html.
192. "Grid Code, High and Extra High Voltage, "E.ON Netz GmbH Bayreuth, Germany, April 2006, available at http://www.eon-netz.com.
193. Lorenz Feddersen(VestasWind Systems),"Circuit to be Used in aWind Power Plant, "U.S. Patent No. US7102247 September 2006.
194. M. Rodriquez, G. Abad, I. Sarasola, and A. Gilabert,"Crowbar Control Algorithms for Doubly Fed Induction Generator DuringVoltage Dips, "presented at European Conference on Power Electronics and Applications, 2005.
195. J. I. Llorente and M. Visiers(Gamesa Innovation & Technology),"Control and Protection of a Doubly-Fed Induction Generator System, "European Patent No. EP1499009, October 2007. Patent also granted in US, Patent No. US7518256, April 2009.
196. Andreas B€ucker(General Electric Company),"Method for Operating aWind Power Plant and Method for Operating It, "U.S. Patent No. US7321221, February 2008.
197. IEC 61400-21: Wind Turbine Generator Systems, Part 21: Measurement and Assessment of Power Quality Characteristics of Grid Connected Wind Turbines. 2nd edition. International Electrotechnical Commission, Geneva, Switzerland, 2008.
198. J. López, L. Marroyo, E. Gubia, E. Olea, and I. Ruiz,"Ride-through ofWind Turbines with Doubly-Fed Induction Generator Under Symmetrical Voltage Dips, "IEEE Trans. Ind. Electron., Vol. 56, pp. 4246-4254, October 2009.
199. Roho Reinhard (Asea Brown Boveri, U.S.A.),"Power Station Having a Generator Which Is Driven by a Turbine, as Well as a Method for Operating Such a Power Station, "U.S. Patent No. US6239511, May 2005. Patent also granted in Europe, Patent No. EP0984552, October 2005.
200. John Godsk Nielsen(Vestas Wind Systems),"Method for Controlling a Power-Grid Connected Wind Turbine Generator During Grid Faults and Apparatus for Implementing Said Method, "U.S. Patent No. US7332827, February 2008. Patent also granted in Europe, Patent No. EP1595328, September 2009.
201. J. I. Llorente and M. Visiers(Gamesa Innovation & Technology),"Method and Device for Injecting Reactive Current During a Mains Supply Voltage Dip, "European Patent No. EP1803932 (A1), July 2007.
202. Janos Rajda, Anthony William Galbraith, and Colin David Schauder(Satcon Technology Corp U.S.A),"Device, System and Method for Providing a Low-Voltage Fault Ride-Through for a Wind Generator Farm, "U.S. Patent No. US7514907, April 2009.
203. http://www.gamesacorp.com.
204. B. K. Bose, Modern Power Electronics and AC Drives. Prenctice Hall, 2002.
205. http://www.gamesacorp.com.
206. http://www.acciona-energia.es.
207. http://www.ingeteam.com.
208. http://www.abb.com/.
209. ACS Catalogs for wind turbines from ABB.
210. http://www.ecotecnia.com/.
211. S. A. Gomez and J. L. R. Amenedo,"Grid Synchronisation of Doubly-Fed Induction Generators Using Direct Torque Control, "in IECON Conference Proceeding, Vol. 4, pp. 3338-3343, 2002.
212. Y. Fang, L. Qi-hui, and J. Zhang,"Flexible Grid-Connection Technique and Novel Maximum Wind Power Tracking Algorithm for Doubly-Fed Wind Power Generator, "Industrial Electronics Society, 2007. In IECON 2007, 33rd Annual Conference of the IEEE, 5-8 November 2007, pp. 2098-2103.
213. Y. Lang, X. Zhang, D. Xu, S. R. Hadianamrei, and H. Ma,"Stagewise Control of Connecting DFIG to the Grid, "IEEE ISIE, 2006.
214. J. Park, K. Lee, D. K. Kerim, K. Lee, and J. P. Kordi,"An Encoder-Free Grid Synchronization Method for a Doubly-fed Induction Generator, "EPE 2007, Aalborg.
215. G. Yuan, J. Chai, and Y. Li,"Vector Control and Synchronization of Doubly Fed Induction Wind Generator System, "in 4th International PEMC Conference Proceedings Vol. 2, pp. 886-890, 2004.
216. J.-B. G. Manel, A. Jihen, and S.-B. Ilhem,"A Novel Approach of Direct Active and Reactive Power Control Allowing the Connection of the DFIG to the Grid, "in Conference EPE'09, Barcelona, Spain.
217. A. G. A. Khalil, D. C. Lee, and S. H. Lee,"Grid Connection of Doubly-Fed Induction Generators in Wind Energy Conversion System, "in Conference IPEMC, 2006.
218. J. L. Da Silva, R. G. de Oliveira, S. R Silva, B. Rabelo, and W. Hofmann,"A Discussion About a Start-up Procedure of a Doubly-Fed Induction Generator System, "in Nordic Workshop on Power and Industrial Electronics, June 2008.
219. S. A. Gomez and J. L. R. Amenedo,"Grid Synchronization of Doubly Fed Induction Generators Using Direct Torque Control, "IEEE IECON Conference Proceedings, Vol. 4, pp. 3338-3343, 2002.
220. X. Zhang, D. Xu, Y. Lang, and H. Ma,"Study on Stagewise Control of Connecting DFIG to the Grid, "in IEEE 5th International Power Electronics and Motion Control Conference, pp. 1-5, 2006.
221. A. G. Abo-Khalil, D.-C. Lee, and S.-P. Ryu,"Synchronization of DFIG Output Voltage to Utility Grid, "European Power and Energy Systems, pp. 1-6, 2006.
222. W. Koczara and G. Iwanski,"Fuel Saving Variable Speed Generating Set, "International Conference on Clean Electrical Power-ICCEP'09, 9-11 June 2009, Capri, Italy, pp. 22-28.
223. R. Pena, R. Cardenas, G. M. Asher, J. C. Clare, J. Rodriguez, and P. Cortes,"Vector Control of a Diesel-Driven Doubly Fed Induction Machine for a Stand-Alone Variable Speed Energy System, "28th Annual Conference of the Industrial Electronics Society-IECON 02, 5-8 November 2002, Vol. 2, pp. 985-990.
224. S. Furuya, T. Taguchi, K. Kusunoki, T. Yanagisawa, T. Kageyama, and T. Kanai,"Successful Achievement in a Variable Speed Pumped Storage Power System at Yagisawa Power Plant, "Power Conversion Conference-PCC'93, Yokohama, 19-21 April 1993, pp. 603-608.
225. T. Kuwabara, A. Shibuya, H. Furuta, E. Kita, and K. Mitsuhashi,"Design and Dynamic Response Characteristics of 400MW Adjustable Speed Pumped Storage Unit for Ohkawachi Power Station, "IEEE Trans. Energy Conversion, Vol. 11, No. 2, pp. 376-384, June 1996.
226. K. Grotenburg, F. Koch, I. Erlich, and U. Bachmann,"Modeling and Dynamic Simulation of Variable Speed Pump Storage Units Incorporated into the German Electric Power System, "9th European Conference on Power Electronics and Applications-EPE'09, Graz, Austria, p.10.
227. S. Breban et al.,"Variable Speed Small Hydro Power Plant Connected to AC Grid or Isolated Loads, "Eur. Power Electron. Drives Assoc. J., Vol. 17, No. 4, January, 2008.
228. H. Akagi and H. Sato,"Control and Performance of a Doubly-Fed Induction Machine Intended for a Flywheel Energy Storage System, "IEEE Trans. Power Electron., Vol. 17, No. 1, pp. 109-116, 2002.
229. A. K. Jain and V. T. Ranganathan,"Wound Rotor Induction Generator With Sensorless Control and Integrated Active Filter for Feeding Nonlinear Loads in a Stand-Alone Grid, "IEEE Trans. Ind. Electron., Vol. 55, No. 1, pp. 218-228, January 2008.
230. R. Pena, R. Cardenas, E. Escobar, J. Clare, and P. Wheeler,"Control System for Unbalanced Operation of Stand-Alone Doubly Fed Induction Generators, "IEEE Trans. Energy Conversion, Vol. 22, No. 2, pp. 544-555, June 2007.
231. L. Guilherme, B. Rolim, D. R. Costa, and M. Aredes,"Analysis and Software Implementation of a Robust Synchronizing PLL Circuit Based on the pq Theory, "IEEE Trans. Ind. Electron., Vol. 53, pp. 1919-1926, December 2006.
232. R. Cardenas, R. Pena, J. Proboste, G. Asher, and J. Clare,"MRAS Observer for Sensorless Control of Standalone Doubly Fed Induction Generators, "IEEE Trans. Energy Conversion, Vol. 20, pp. 710-718, December 2005.
233. D. G. Forchetti, G. O. Garcia, and M. I. Valla,"Adaptive Observer for Sensorless Control of Stand-Alone Doubly Fed Induction Generator, "IEEE Trans. Ind. Electron., Vol. 56, No. 10, pp. 4174-4180, 2009.
234. G. Iwanski and W. Koczara,"Sensorless Direct Voltage Control of the Stand-Alone Slip-Ring Induction Generator, "IEEE Trans. Ind. Electron., Vol. 54, No. 2. pp. 1237-1239, April 2007.
235. M. Chomat, L. Schreier, and J. Bendl,"Control Method for Doubly Fed Machine Supplying Unbalanced Load" 9th EuropeanConference onPower Electronics and Applications-EPE, Toulouse, France, 2003 (CD Proc.).
236. G. Iwanski andW. Koczara,"DFIM Based Power Generation System with UPS Function for Variable Speed Applications, "IEEE Trans. Ind. Electron., Vol. 55, No. 8, pp. 3047-3054, August 2008.
237. R. Teodorescu and F. Blaabjerg,"Flexible Control of Small Wind Turbines with Grid Failure Detection Operating in Stand-alone and Grid-Connected Mode, "IEEE Trans. Power Electron., Vol. 19, pp. 1323-1332, September 2004.
238. J. M. Guerrero, L. G. de Vicuna, and J. Uceda,"Uninterruptible Power Supply Systems Provide Protection, "IEEE Ind. Electron. Mag., Vol. 1, No. 1, pp. 28-38, 2007.
239. http://www.wind-energy-the-facts.com/.
240. http://www.windplatform.eu/.
241. European Wind Energy Association, available at www.ewea.org.
242. International Energy Agency Wind, available at http://www.ieawind.org/.
243. World Wind Energy Association (WWEA), available at www.wwindea.org.
244. Global Wind Energy Council, available at http://www.gwec.net.
245. Spanish Wind Energy Association (AEE), available at www.aeeolica.org.
246. American Wind Energy Association, available at http://www.awea.org/.
247. EPE Wind Energy Chapter (EPE-WE), available at http://www.epe-association.org.
248. Sandia National LaboratoryWind Energy Technology, available at http://www.sandia.gov/wind/links.htm.
249. Renewable Energy database, available at http://re-database.com/.
250. Danish Wind Industry Association, available at http://www.talentfactory.dk.
251. http://www.thewindpower.net.
252. R. Saikki,"Technology Trends of Wind Power Generators, "Nordic Conference, Stockholm, September 2009.
253. J. Moya,"Future Trends and Needs in theWind Power Generation, "Gamesa Corporation, Pennsylvania Wind Energy Symposium 2008.
254. S. Butterfield,"Technology Overview and Challenges, "NREL, Pennsylvania Wind Energy Symposium 2008.
255. B. Hayman, J. Wedel-Heinen, and P. Brondsted,"Materials Challenges in Present and Future Wind Energy, "MRS Bull., Vol. 33, pp. 343-353, April 2008.
256. "WindPower and theEnvironment-Benefits and Challenges, "available at www.ewea.org.
257. www.wilkipedia.com.
258. http://www.ingeteam.com.
259. http://www.ingeconcleanpower.com/.
260. http://w2ps.es/.
261. B. K. Bose, Modern Power Electronics and AC Drives. Prenctice Hall, 2002.
262. Y. Kawabata, E. Ejiogu, and T. Kawabata,"Vector-Controlled Double-Inverter-Fed Wound-Rotor Induction Motor Suitable for High-Power Drives, "IEEE Trans. Ind. Appl., Vol. 35, pp. 1058-1066, September/October 1999.
263. F. Bonnet, P. E. Vidal, and M. Pietrzak-David,"Dual Direct Torque Control of Doubly Fed Induction Machine, "IEEE Trans. Ind. Electron., Vol. 54, No. 5, pp. 2482-2490, October 2007.
264. G. Poddar and V. T. Ranganathan,"Direct Torque and Frequency Control of Double-Inverter-Fed Slip-Ring Induction Motor Drive, "IEEE Trans. Ind. Electron.,Vol. 51, No. 6, pp. 1329-1337, December 2004.
265. G. Poddar and V. T. Ranganathan,"Sensorless Double-Inverter-Fed Wound-Rotor Induction-Machine Drive, "IEEE Trans. Ind. Electron., Vol. 53, No.1, pp. 86-95, February 2006.
266. J. M. Corcelles, S. Arnaltes, D. Santos, and J. L. R. Amenedo,"Asynchronous Generator with Double Supply, "International Patent WO2008/077974.
267. http://www.abb.com/.
268. http://www.siemens.com.
269. http://www.nrel.gov/.
270. G. Ugalde,"Study on Concentrated Windings Permanent Magnet Machines for Direct Drive Applications, "Ph.D. thesis, University of Mondragon, 2009.
271. D. Bang, H. Polinder, G. Shrestha, and J. A. Ferreira,"Review of Generator Systems for Direct-Drive Wind Turbines, "in EWEC 2008.
272. M. R. Dubois, H. Polinder, and J. A. Ferreira,"Comparison of Generator Topologies for Direct-Drive Wind Turbines, "Proc. Nordic Countries Power and Industrial Electronic Conference Dalborg, 2000, pp. 22-26.
273. G. Shrestha, H. Polinder, D. J. Bang, and J. A. Ferreira,"Review of Energy Conversion System for Large Wind Turbines, "in EWEC 2008.
274. I. Sarasola, J. Poza, M. A. Rodriguez, and G. Abad,"Direct Torque Control Design and Experimental Evaluation for the Brushless Doubly Fed Machine, "Energy Conversion and Management, Vol. 52, No. 2, pp. 1226-1234, February 2011.
275. J. Dai, D. Xu, and B.Wu,"A Novel Control Scheme for Current-Source-Converter-Based PMSGWind Energy Conversion Systems, "IEEE Trans. Power Electron., Vol. 24, No. 4, pp. 963-972, April 2009.
276. A. V. Rebsdorf and L. Helle,"Variable Wind Speed Turbine Having a Matrix Converter, "U.S. Patent, 6566764. May 2003.
277. J. Mayor et al.,"Wind Turbine Method Operation and System". US Patent, 0057446. March 2011.
278. W. Leonhard, Control of Electrical Drives. Springer-Verlag, 1985.
279. E. Levi,"Impact of Iron Loss on Behavior of Vector Controlled Induction Machines, "IEEE Trans. Ind. Appl., Vol. 31, No. 6, pp. 1287-1296, December, 1995.