Synchronous generators

Synchronous Generators

Volumn , Issue , 2005, Pages 1-432

  Boldea, Ion ^a  

^a POLITEHNICA UNIVERSITY OF TIMISOARA   (Romania)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85056072876     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (188)

1. B. Sadden, Hydropower development in southern and southeastern Asia, IEEE Power Eng. Rev., 22, 3, March, 2002, pp. 5–11.
2. J.A. Veltrop, Future of dams, IEEE Power Eng. Rev., 22, 3, March, 2002, pp. 12–18.
3. H.M. Turanli, Preparation for the next generation at Manitoba Hydro, IEEE Power Eng. Rev., 22, 3, March, 2002, pp. 19–23.
4. O. Unver, Southeastern Anatolia development project, IEEE Power Eng. Rev., 22, 3, March, 2002, pp. 10–11, 23–24.
5. H. Yang, and G. Yao, Hydropower development in Southern China, IEEE Power Eng. Rev., 22, 3, March, 2002, pp. 16–18.
6. T.J. Hammons, J.C. Boyer, S.R. Conners, M. Davies, M. Ellis, M. Fraser, E.A. Nolt, and J. Markard, Renewable energy alternatives for developed countries, IEEE Trans., EC-15, 4, 2000, pp. 481–493.
7. T.J. Hammons, B.K. Blyden, A.C. Calitz, A.G. Gulstone, E.I. Isekemanga, R. Johnstone, K. Paleku, N.N. Simang, and F. Taher, African electricity infrastructure interconnection and electricity exchanges, IEEE Trans., EC-15, 4, 2000, pp. 470–480.
8. C. Lewiner, Business and technology trends in the global utility industries, IEEE Power Eng. Rev., 21, 12, 2001, pp. 7–9.
9. M. Baygen, A vision of the future grid, IEEE Power Eng. Rev., 21, 12, 2001, pp. 10–12.
10. A. Edris, FACTS technology development: an update, IEEE Power Eng. Rev., 20, 3, 2000, pp. 4–9.
11. R. Hebner, J. Beno, and A. Walls, Flywheel batteries come around again, IEEE-Spectrum, 39, 4, 2002, pp. 46–51.
12. T. Bödefeld, and H. Sequenz, Elektrische Maschinen, Springer, Vienna, 1938 (in German).
13. C. Concordia, Synchronous Machines, Theory and Performance, John Wiley & Sons, New York, 1951.
14. R. Richter, Electrical Machines, vol. 2, Synchronous Machines, Verlag Birkhäuser, Basel, 1963 (in German).
15. M. Kostenko, and L. Piotrovski, Electrical Machines, vol. 2, AC Machines, Mir Publishers, Moscow, 1974.
16. J.H. Walker, Large Synchronous Machines, Clarendon Press, Oxford, 1981.
17. T.J.E. Miller, Brushless PM and Reluctance Motor Drives, Clarendon Press, Oxford, 1989.
18. S.A. Nasar, I. Boldea, and L. Unnewher, Permanent Magnet, Reluctance and Selfsynchronous Motors, CRC Press, Boca Raton, FL, 1993.
19. D.C. Hanselman, Brushless PM Motor Design, McGraw-Hill, New York, 1994.
20. D.R. Hendershot Jr., and T.J.E. Miller. Design of Brushless PM Motors, Magna Physics Publishing and Clarendon Press, Oxford, 1994.
21. J. Gieras, F. Gieras, and M. Wing, PM Motor Technologies, 2nd ed., Marcel Dekker, New York, 2002.
22. I. Boldea, S. Scridon, and L. Tutelea, BEGA: Biaxial Excitation Generator for Automobiles, Record of OPTIM-2000, Poiana Brasov, Romania, vol. 2, pp. 345–352.
23. T. Miller, Switched Reluctance Motors and Their Control, Oxford University Press, Oxford, U.K., 1993.
24. Y. Liuo, and T.A. Lipo, A new doubly salient PM motor for adjustable speed drives, EMPS, 22, 3, 1994, pp. 259–270.
25. M. Radulescu, C. Martis, and I. Husain, Design and performance of small doubly salient rotor PM motor, EPCS (former EMPS), vol. 30, 2002, pp. 523–532.
26. F. Blaabjerg, I. Christensen, P.O. Rasmussen, and L. Oestergaard, New advanced control methods for doubly salient PM motor, Record of IEEE-IAS-1996, pp. 786–793.
27. S.E. Rauch, and L.J. Johnson, Design principles of flux switch alternator, AIEE Trans., 74, III, 1955, pp. 1261–1268.
28. H. Weh, H. Hoffman, and J. Landrath, New permanent excited synchronous machine with high efficiency at low speeds, In Proceedings of the ICEM-1988, Pisa, Italy, pp. 1107–1111.
29. G. Henneberger, and I.A. Viorel, Variable reluctance electric machines, Shaker Verlag, Aachen, 2001, Chapter 6.
30. L. Luo, S. Huang, S. Chen, T.A. Lipo, Design and experiments of novel axial flux circumferentially current PM (AFCC) machine with radial airgap, Record of IEEE-IAS-2001.
31. I. Boldea, and S.A. Nasar, Linear Electric Actuators and Generators, Cambridge University Press, London; New York, 1997.
32. J. Wang, W. Wang, G.W. Jewell, and D. Howe, Design and experimental characterisation of a linear reciprocating generator, Proc. IEE, vol. 145-EPA, 6, 1998, pp. 509–518.
33. L.M. Hansen, P.H. Madsen, F. Blaabjerg, H.C. Christensen, U. Lindhard, and K. Eskildsen, Generators and power electronics technology for wind turbines, Record of IEEE-IECON-2001, pp. 2000–2005.
34. I. Boldea, I. Serban, and L. Tutelea, Variable speed generators and their control, J. Elec. Eng., vol. 2, no. 1, 2002 (www.jee.ro).
35. K. Kudo, “Japanese experience with a converter fed variable speed pumped storage system, Hydropower & Dams, March 1994.
36. T. Kuwabata, A. Shibuya, and M. Furuta, Design and dynamic response characteristics of 400 MW adjustable speed pump storage unit for Ohkawachi Power Station, IEEE Trans., EC-11, 2, 1996, pp. 376–384.
37. T.-H. Kim, H.-W. Lee, Y.H. Kim, J. Lee, and I. Boldea, Development of a flux concentration-type linear oscillatory actuator, IEEE Trans., MAG – 40, 4, 2004, pp. 2092–2094.
38. R. Decker, Energy Conversion, Oxford University Press, Oxford, 1994.
39. P. Kundur, Power System Stability and Control, McGraw-Hill, New York, 1994.
40. J. Machowski, J.W. Bialek, and J.R. Bumby, Power System Dynamics and Stability, John Wiley & Sons, New York, 1997.
41. IEEE Working Group Report, Steam models for fossil fueled steam units in power-system studies, IEEE Trans., PWRS-6, 2, 1991, pp. 753–761.
42. S. Yokokawa, Y. Ueki, H. Tanaka, Hi Doi, K. Ueda, and N. Taniguchi, Multivariable adaptive control for a thermal generator, IEEE Trans., EC-3, 3, 1988, pp. 479–486.
43. G.K. Venayagomoorthy, and R.G. Harley, A continually on line trained microcontroller for excitation and turbine control of a turbogenerator, IEEE Trans., EC-16, 3, 2001, pp. 261–269.
44. C.F. Taylor, The Internal-Combustion Engine in Theory and Practice, vol. II: Combustion, Fuels, Materials, Design, The MIT Press, Cambridge, MA, 1968.
45. P.M. Anderson, and M. Mirheydar, Analysis of a diesel-engine driven generating unit and the possibility for voltage flicker, IEEE Trans., EC-10, 1, 1995, pp. 37–47.
46. N. Watson, and M.S. Janota, Turbocharging the Internal Combustion Engine, Macmillan, New York, 1982.
47. S. Roy, O.P. Malik, and G.S. Hope, Adaptive control of speed and equivalence ratio dynamics of a diesel driven power plant, IEEE Trans., EC-8, 1, 1993, pp. 13–19.
48. A. Kusko, Emergency Stand-by Power Systems, McGraw-Hill, New York, 1989.
49. K.E. Yoager, and J.R. Willis, Modelling of emergency diesel generators in an 800 MW nuclear power plant, IEEE Trans., EC-8, 3, 1993, pp. 433–441.
50. U. Kieneke, and L. Nielsen, Automotive Control Systems, Springer-Verlag, Heidelberg, 2000.
51. G. Walker, O.R. Fauvel, G. Reader, and E.R. Birgham, The Stirling Alternative, Gordon and Breach Science Publishers, London, 1994.
52. R.W. Redlich, and D.W. Berchowitz, Linear dynamics of free piston Stirling engine, Proc. of Inst. Mech. Eng., March 1985, pp. 203–213.
53. M. Barglazan, Hydraulic Turbines and Hydrodynamic Transmissions, University Politechnica of Timisoara, Romania, 1999.
54. IEEE Working Group on Prime Mover and Energy Supply, Hydraulic turbine and turbine control models for system stability studies, IEEE Trans., PS-7, 1, 1992, pp. 167–179.
55. C.D. Vournas, Second order hydraulic turbine models for multimachine stability studies, IEEE Trans., EC-5, 2, 1990, pp. 239–244.
56. C.K. Sanathanan, Accurate low order model for hydraulic turbine-penstock, IEEE Trans., EC-2, 2, 1987, pp. 196–200.
57. D.D. Konidaris, and N.A. Tegopoulos, Investigation of oscillatory problems of hydraulic generating units equipped with Francis turbines, IEEE Trans., EC-12, 4, 1997, pp. 419–425.
58. D.J. Trudnowski, and J.C. Agee, Identifying a hydraulic turbine model from measured field data, IEEE Trans., EC-10, 4, 1995, pp. 768–773.
59. J.E. Landsberry, and L. Wozniak, Adaptive hydrogenerator governor tuning with a genetic algorithm, IEEE Trans., EC-9, 1, 1994, pp. 179–185.
60. Y. Zhang, O.P. Malik, G.S. Hope, and G.P. Chen, Application of inverse input/output mapped ANN as a power system stabilizer, IEEE Trans., EC-9, 3, 1994, pp. 433–441.
61. M. Djukanovic, M. Novicevic, D. Dobrijovic, B. Babic, D.J. Sobajic, and Y.H. Pao, Neural-net based coordinated stabilizing control of the exciter and governor loops of low head hydropower plants, IEEE Trans., EC-10, 4, 1995, pp. 760–767.
62. T. Kuwabara, A. Shibuya, M. Furuta, E. Kita, and K. Mitsuhashi, Design and dynamics response characteristics of 400 MW adjustable speed pump storage unit for Obkawachi power station, IEEE Trans., EC-11, 2, 1996, pp. 376–384.
63. L.L. Freris, Wind Energy Conversion Systems, Prentice Hall, New York, 1998.
64. V.H. Riziotis, P.K. Chaviaropoulos, and S.G. Voutsinas, Development of the State of the Art Aerolastic Simulator for Horizontal Axis Wind Turbines, Part 2: Aerodynamic Aspects and Application, Wind Eng., 20, 6, 1996, pp. 223–440.
65. V. Akhmatov, Modelling of Variable Speed Turbines with Doubly-Fed Induction Generators in Short-Term Stability Investigations, paper presented at the Third International Workshop on Transmission Networks for Off-Shore Wind Farms, Stockholm, Sweden, April 11–12, 2002.
66. T. Thiringer, and J.A. Dahlberg, Periodic pulsations from a three-bladed wind turbine, IEEE Trans., EC-16, 2, 2001, pp. 128–133.
67. H. Suel, and J.G. Schepers, Engineering models for dynamic inflow phenomena, J. Wind Eng. Ind. Aerodynamics, 39, 2, 1992, pp. 267–281.
68. S.A. Papathanassiou, and M.P. Papadopoulos, Mechanical stress in fixed-speed wind turbines due to network disturbances, IEEE Trans., EC-16, 4, 2001, pp. 361–367.
69. S.H. Jangamshatti, and V.G. Rau, Normalized power curves as a tool for identification of optimum wind turbine generator parameters, IEEE Trans., EC-16, 3, 2001, pp. 283–288.
70. R. Richter, Electrical Machines, vol. 2, Synchronous Machines, Verlag Birkhauser, Basel, 1954 (in German).
71. J.H. Walker, Large Synchronous Machines, Clarendon Press, Oxford, 1981.
72. I. Boldea, and S.A. Nasar, Induction Machine Handbook, CRC Press, Boca Raton, Florida, 2001.
73. IEEE Std. 115 – 1995, “Test Procedures for Synchronous Machines.”
74. V. Ostovic, Dynamics of Saturated Electric Machines, Springer-Verlag, Heidelberg, 1989.
75. M. Kostenko, and L. Piotrovski, Electrical Machines, vol. 2, MIR Publishers, Moscow, 1974.
76. C. Concordia, Synchronous Machines, John Wiley & Sons, New York, 1951.
77. J. Machowski, J.W. Bialek, and J.R. Bumby, Power System Dynamics and Stability, John Wiley & Sons, New York, 1997.
78. M. Namba, J. Hosoda, S. Dri, and M. Udo, Development for measurement of operating parameters of synchronous generator and control system, IEEE Trans., PAS-200, 2, 1981, pp. 618–628.
79. I. Boldea, and S.A. Nasar, Unified treatment of core losses and saturation in orthogonal axis model of electrical machines, IEE Proc., 134, 6, 1987, pp. 355–363.
80. N.A. Arjona, and D.C. Macdonald, A new lumped steady-state synchronous machine model derived from finite element analysis, IEEE Trans., EC-14, 1, 1999, pp. 1–7.
81. E. Levi, Saturation modeling in D-Q models of salient pole synchronous machines, IEEE Trans., EC-14, 1, 1999, pp. 44–50.
82. A.M. El-Serafi, and J.Wu, Determination of parameter representing cross-coupling effect in saturated synchronous machines, IEEE Trans., EC-8, 3, 1993, pp. 333–342.
83. K. Ide, S. Wakmi, K. Shima, K. Miyakawa, and Y. Yagi, Analysis of saturated synchronous reactances of large turbine generator by considering cross-magnetizing reactances using finite elements, IEEE Trans., EC-14, 1, 1999, pp. 66–71.
84. I. Kamwa, P. Viarouge, and R. Mahfoudi, Phenomenological models of large synchronous machines from short-circuit tests during commissioning — A classical modern approach, IEEE Trans., EC-9, 1, 1994, pp. 85–97.
85. S.A. Soliman, M.E. El-Hawary, and A.M. Al-Kandari, Synchronous Machine Optimal Parameter Estimation from Digitized Sudden Short-Circuit Armature Current, Record of ICEM-2000, Espoo, Finland.
86. A. Keyhani, H. Tsai, and T. Leksan, Maximum likelihood estimation of synchronous machine parameters from standstill time response data, IEEE Trans., EC-9, 1, 1994, pp. 98–114.
87. I. Kamwa, P. Viarouge, and J. Dickinson, Identification of generalized models of synchronous machines from time domain tests, IEEE Proc., 138, 6, 1991, pp. 485–491.
88. S. Horning, A. Keyhani, and I. Kamwa, On line evaluation of a round rotor synchronous machine parameter set estimated from standstill time domain data, IEEE Trans., EC-12, 4, 1997, pp. 289–296.
89. K. Beya, R. Pintelton, J. Schonkens, B. Mpanda-Maswe, P. Lataire, M. Dehhaye, and P. Guillaume, Identification of synchronous machine parameter, using broadband excitation, IEEE Trans., EC-9, 2, 1994, pp. 270–280.
90. I.M. Canay, Causes of discrepancies in calculation of rotor quantities and exact equivalent diagrams of the synchronous machine, IEEE Trans., PAS-88, 1969, pp. 1114–1120.
91. I. Kamwa, and P. Viarouge, On equivalent circuit structures for empirical modeling of turbine-generators, IEEE Trans., EC-9, 3, 1994, pp. 579–592.
92. P.L. Dandeno, and A.T. Poray, Development of detailed equivalent circuits from standstill frequency response measurements, IEEE Trans., PAS-100, 4, 1981, pp. 1646–1655.
93. A. Keyhani, S. Hao, and R.P. Schultz, Maximum likelihood estimation of generator stability constants using SSFR test data, IEEE Trans., EC-6, 1, 1991, pp. 140–154.
94. P. Kundur, Power System Stability and Control, McGraw-Hill, New York, 1993, pp. 169–191.
95. J.V. Milanovic, F. Al-Jowder, and E. Levi, Small Disturbance Stability of Saturated Anisotropic Synchronous Machine Models, Record of ICEM-2000, Espoo, Finland, vol. 2, pp. 898–902.
96. Y. Hanalla, and D.C. Macdonald, Numerical analysis of transient field in electrical machines, IEE Proc., 123, 1976, pp. 183–186.
97. A.Y. Hanalla, and D.C. Macdonald, Sudden 3-phase shortcircuit characteristics of turbine generators from design data using electromagnetic field calculation, IEE Proc., 127, 1980, pp. 213–220.
98. S.C. Tandon, A.F. Armor, and M.V.K. Chari, Nonlinear transient FE field computation for electrical machines and devices, IEEE Trans., PAS-102, 1983, pp. 1089–1095.
99. P.J. Turner, FE simulation of turbine-generator terminal faults and application to machine parameter prediction, IEEE Trans., EC-2, 1, 1987, pp. 122–131.
100. S.I. Nabita, A. Foggia, J.L. Coulomb, and G. Reyne, FE simulation of unbalanced faults in a synchronous machine, IEEE Trans., MAG-32, 1996, pp. 1561–1564.
101. D.K. Sharma, D.H. Baker, J.W. Daugherty, M.D. Kankam, S.H. Miunich, and R.P. Shultz, Generator simulation-model constants by FE comparison with test results, IEEE Trans., PAS-104, 1985, pp. 1812–1821.
102. M.A. Arjona, and D.C. Macdonald, Characterizing the D-axis machine model of a turbogenerator using finite elements, IEEE Trans., EC-14, 3, 1999, pp. 340–346.
103. M.A. Arjona, and D.C. Macdonald, Lumped modeling of open circuit turbogenerator operational parameters, IEEE Trans., EC-14, 3, 1999, pp. 347–353.
104. J. P. Sturgess, M. Zhu, and D.C. Macdonald, Finite element simulation of a generator on load during and after a three phase fault, IEEE Trans., EC-7, 4, 1992, pp. 787–793.
105. T. Laible, Theory of Synchronous Machines in Transient Regimes, Springer-Verlag, Heidelberg, 1952.
106. P. Kundur, Power System Stability and Control, McGraw-Hill, New York, 1994.
107. J. Machowski, J.W. Bialek, and J.R. Bumby, Power Systems Dynamics and Stability, John Wiley & Sons, New York, 1997.
108. L.L. Grigsby, Ed., Electric Power Engineering Handbook, CRC Press, Boca Raton, FL, 1998.
109. Task Force, Computer models for representation of digital-based excitation systems, IEEE Trans., EC-11, 3, 1996, pp. 607–615.
110. N. Mohan, T. Undeland, and R. Williams, Power Electronics, 3rd ed., John Wiley & Sons, New York, 2002.
111. I. Boldea, and S.A. Nasar, Electric Drives, CRC Press, Boca Raton, FL, 1998, chap. 5, pp. 90–91.
112. A. Godhwani, and M.J. Basler, A digital excitation control system for use on brushless excited synchronous generators, IEEE Trans., EC-11, 3, 1996, pp. 616–620.
113. Task Force, Underexcitation limiter models for power system stability studies, IEEE Trans., EC-10, 3, 1995, pp. 524–531.
114. G. Roger Bérubé, Les.M. Hayados, and R.E. Beaulien, A utility perspective on underexcitation limiters, IEEE Trans., EC-10, 3, 1995, pp. 532–537.
115. G.K Girgis, and H.D. Vu, Verification of limiter performance in modern excitation control systems, IEEE Trans., EC-10, 3, 1995, pp. 538–542.
116. H. Vu, and J.C. Agee, Comparison of power system stabilizers for damping local mode oscillations, IEEE Trans., EC-8, 3, 1993, pp. 533–538.
117. A. Murdoch, S. Venkataraman, R.A. Lawson, and W.R. Pearson, Integral of accelerating power type PSS, Part I and II, IEEE Trans., EC-14, 4, 1999, pp. 1658–1672.
118. T. Hiyama, K. Miyazaki, and H. Satoh, A fuzzy logic excitation system for stability enhancement of power systems with multimode oscillations, IEEE Trans., EC-11, 2, 1996, pp. 449–454.
119. P. Hoang, and K. Tomsovic, Design and analysis of an adaptive fuzzy power system stabilizer, IEEE Trans., EC-11, 2, 1996, pp. 455–461.
120. G.P. Chen, O.P. Malik, H.Y. Qim, and G.Y. Xu, Optimization technique for the design of linear optimal power system stabilizer, IEEE Trans., EC-7, 3, 1992, pp. 453–459.
121. S. Chen, and O.P. Malik, Power system stabilizer design using synthesis, IEEE Trans., EC-10, 1, 1995, pp. 175–181.
122. Y. Caoi, L. Jiang, S. Cheng, D. Chen, O.P. Malik, and G.S. Hope, A nonlinear variable structure stabilizer for power system stability, IEEE Trans., EC-9, 3, 1994, pp. 488–495.
123. R. Asgharian, and S.A Tavakoli, A schematic approach to performance weight selection in design of robust H PSS using genetic algorithms, IEEE Trans., EC-11, 1, 1996, pp. 111–117.
124. W.J. Wilson, and J.D. Applevich, Co-ordinated governor exciter stabilizer design in multimachine power systems, IEEE Trans., EC-1, 3, 1986, pp. 61–67.
125. M. Djukanovic, M. Novicevic, D. Dobrojevic, B. Babic, D. Babic, and Y. Pao, Neural-net based coordinated stabilizing control for exciter and governor loops of low head hydroelectric power plants, IEEE Trans., EC-10, 4, 1995, pp. 760–767.
126. M.B. Djukanovic, M.S Calovic, B.V. Vesovic, and D.J. Sobajic, Neuro-fuzzy controller of low head hydropower plants using adaptive-network based fuzzy inference system, IEEE Trans., EC-12, 4, 1997, pp. 375–381.
127. G.K. Venayagamoorthy, and R.G. Herley, A continually online trained neurocontroller for excitation and turbine control of a turbogenerator, IEEE Trans., EC-16, 3, 2001, pp. 261–269.
128. A.R. Mahran, B.W. Hegg, and M.L. El-Sayed, Co-ordinated control of synchronous generator excitation and static VAR compensator, IEEE Trans., EC-7, 2, 1992, pp. 615–622.
129. J.D. Hurley, L.M. Bize, and C.R. Mummart, The adverse effects of excitation system VAR and power factor controllers, IEEE Trans., EC-14, 4, 1999, pp. 1636–1641.
130. T. Ise, Y. Murakami, and K. Tsuji, Simultaneous active and reactive power control of SMES using GTO converters, IEEE Trans., PWRD-1, 1, 1986, pp. 143–150.
131. E. Handschim, and T. Stephanblome, New SMES Strategies as a Link Between Network and Power Plant Control, paper presented at the International IFAC Symposium on Power Plants and Power System Control, Munich, Germany, March 9–11, 1992.
132. Q. Jiang, and M.F. Coulon, The power regulation of a PWM type superconducting magnetic energy storage unit, IEEE Trans., EC-11, 1, 1996, pp. 168–174.
133. A.H.M. Rahim, and A.M. Mohammad, Improvement of synchronous generator damping through superconducting magnetic energy storage systems, IEEE Trans., EC-9, 4, 1996, pp. 736–742.
134. S.C. Tripathy, R. Balasubramanian, and P.S. Nair, Adaptive automatic generation control with superconducting magnetic energy storage in power systems, IEEE Trans., EC-7, 3, 1992, pp. 439–441.
135. S.C. Tripathy, and K.P. Juengst, Sample data automatic generation control with superconducting magnetic energy storage in power systems, IEEE Trans., EC-12, 2, 1997, pp. 187–192.
136. J. Chatelain, and B. Kawkabani, Subsynchronous resonance (SSR) countermeasures applied to the second benchmark model, EPCS J., 21, 1993, pp. 729–739.
137. L. Wang, Damping of torsional oscillations using excitation control of synchronous generator: the IEEE second benchmark model investigation, IEEE Trans., EC-6, 1, 1991, pp. 47–54
138. A.H.M.A. Rahim, A.M. Mohammad, and M.R. Khan, Control of subsynchronous resonant modes in a series compensated system through superconducting magnetic energy storage units, IEEE Trans., EC-11, 1, 1996, pp. 175–180.
139. A. Hefner, R. Singh, and J. Lai, Emerging silicon-carbide power switches enable revolutionary changes in high voltage power conversion, IEEE Power Electron. Soc. Newsl., 16, 4, 2004, pp. 10–13.
140. B.E.B. Gott, W.R. Mc Cown, and J.R. Michalec, Progress in Revision of IEEE/ANSI C 50 Series of Standards for Steam and Combustion Turbine Generators and Harmonization with the IEC 60034 Series, Record of IEEE–IEMDC–2001 Conference, MIT.
141. R.J. Nelson, Conflicting Requirements for Turbogenerators from Grid Codes and Relevant Generator Standard, Record of IEEE–IEMDC–2001, Meeting, MIT, pp. 63–68.
142. C.E. Stephan, and Z. Baba, Specifying a Turbogenerator’s Electrical Parameters by Standards and Grid Codes, Record of IEEE–IEMDC–2001, Meeting, MIT, pp. 57–62.
143. J.M. Forgarty, Connection Between Generator Specifications and Fundamental Design Principles, Record of IEEE–IEMDC–2001, Meeting, MIT, pp. 51–56.
144. K. Vogt, Electrical Machines, VEB Verlag Technik, Berlin, 4th ed., 1988, pp. 416 (in German).
145. J.H. Walker, Large Synchronous Machines, Clarendon Press, Oxford, 1981.
146. V.V. Dombrowski, A.G. Eremeev, N.P. Ivanov, P.M. Ipatov, M.I. Kaplan, and G.B. Pinskii, Design of Hydrogenerators, vol. I and II, Energy Publishers, Moskow, 1965 (in Russian).
147. V. Ostovic, Dynamics of Saturated Electric Machines, Springer-Verlag, Heidelberg, 1989.
148. R. Richter, Electric Machines, vol. 2, Verlag Birkhäuser, Basel, Stuttgart, 1963 (in German).
149. I. Boldea, and S.A. Nasar, The Induction Machine Handbook, chap. 6, CRC Press, Boca Raton, FL, 2001.
150. A.B. Danilevici, V.V. Dombrovski, and E.I.A. Kazovski, A.C. Machinery Parameters, Science Publishers, Moskow, 1965 (in Russian).
151. I.S. Gheorghiu, and A. Fransua, Treatise of Electric Machines, vol. 4, Synchronous Machine, Tech. Publ., Bucharest, 1972 (in Romanian).
152. E. Levi, Polyphase Motors: A Direct Approach to Their Design, John Wiley & Sons, New York, 1985.
153. K. Oberretl, Eddy current losses in solid pole shoes of synchronous machines at no-load and on load, IEEE Trans., PAS-91, 1972, pp. 152–160.
154. O. Drubel, and R.L. Stall, Comparison between analytical and numerical methods for calculating tooth ripple losses in salient pole synchronous machines, IEEE Trans., EC-16, 1, 2001, pp. 61–67.
155. A. Murdoch, and M.J. D’Antonio, Generator Excitation Systems — Performance Specification to Meet Interconnection Requirements, Record of IEEE–IEMDC–2001, MIT, June 2001.
156. M. Tartibi, and A. Domijan, Optimizing A.C. Exciter design, IEEE Trans., EC-11, 1, 1996, pp. 16–24.
157. A.M. Knight, N. Karmaker, and K. Weeber, Use of a permeance model to predict force harmonic components and damper winding effect in salient-pole synchronous machines, IEEE Trans., EC-17, 4, 2002, pp. 478–484.
158. S.S. Rao, Optimization Methods in Engineering, John Wiley & Sons, New York, 1996.
159. O.W. Andersen, Optimized Design of Salient Pole Synchronous Generators, Record of ICEM–200, Espoo, Finland, August 28–30, 2000, pp. 987–989.
160. E. Schlemmer, W. Harb, G. Lichtenecker, F. Muller, and R. Kleinhaentz, Optimization of Large Salient Pole Generators Using Evolution Strategies and Genetic Algoritms, Record of ICEM–2000, Espoo, Finland, pp. 1030–1034.
161. J. Bäcker, J. Janning, and H. Jebenstreit, High dynamic control of a three-level voltage–source–con-verter drive for a main strip mill, IEEE Trans., EC-12, 1, 1997, pp. 66–72.
162. T.A. Meynard, H. Foch, P. Thomas, J. Courault, R. Iakob, and M. Mahrstaedt, Multilevel converters: basic concepts and industry applications, IEEE Trans., IE-49, 5, 2002, pp. 955–964.
163. IEEE standard 115-1995.
164. K. Shima, K. Ide, and M. Takahashi, Finite-element calculation of leakage inductances of a satu-rated-pole synchronous machine with damper circuits, IEEE Trans., EC-17, 4, 2002, pp. 463–471.
165. K. Shima, K. Ide, and M. Takashashi, Analysis of leakage flux distributions in a salient-pole synchronous machine using finite elements, IEEE Trans., EC-18, 1, 2003, pp. 63–70.
166. A.M. El-Serafi, and J. Wu, A new method for determining the armature leakage reactance of synchronous machines, IEEE Trans., EC-18, 1, 2003, pp. 80–86.
167. A.M. El-Serafi, and N.C. Kar, Methods for determining the Q axis saturation characteristics of salient-pole synchronous machines from the measured D-axis characteristics, IEEE Trans., EC-18, 1, 2003, pp. 80–86.
168. A.W. Rankin, Per unit impedance of synchronous machines, AIEE Trans., 64, pp. 564–572 and 1985, pp. 939–941.
169. S. Tahan, and I. Kamwa, A two factor saturation model for synchronous machine with multiple rotor circuits, IEEE Trans., EC-10, 4, 1995, pp. 609–616.
170. M. Biriescu, and Gh. Liuba, Identification of reactances of synchronous machine including the saturation influence, in Proceedings of International Conference on Evolution and Modern Aspects of Synchronous Machines, Zurich, August 27–29, 1991, pp. 55–58.
171. M. Biriescu, G. Liuba, M. Mot, V. Olarescu, and V. Groza, Identification of Synchronous Machine Reactances from Current Decay at Standstill Test, Record of ICEM-2000, Espoo, Finland, pp. 1914–1916.
172. A. Keyhani, S.I. Moon, A. Tumageanian, and T. Leksau, Maximum Likelihood Estimation of Synchronous Machine Parameters from Flux Decay Data, in Proceedings of ICEM-1992, vol. 1, Manchester, U.K., 1992, pp. 34–38.
173. N. Dedene, R. Pintelon, and Ph. Lataire, Estimation of global synchronous machine model using a MIMO estimator, IEEE Trans., EC-18, 1, 2003, pp. 11–16.
174. F.P. de Melle, and J.R. Ribeiro, Derivation of synchronous machine parameters from tests, IEEE Trans., PAS-96, 4, 1977, pp. 1211–1218.
175. I.M. Canay, Causes of discrepancies in calculation of rotor quantities and exact equivalent diagrams of the synchronous machine, IEEE Trans., PAS-88, 1969, pp. 114–1120.
176. P.L. Dandeno, Discussion, IEEE Trans., EC-9, 3, 1994, pp. 587–588.
177. I. Kamwa, and P. Viarouge, On equivalent circuit structures for empirical modeling of turbine-generators and discussion, IEEE Trans., EC-9, 3, 1994, pp. 579–592.
178. P.L. Dandeno, and H.C. Karmaker, Experience with standstill frequency response (SSFR) testing and analysis of salient pole synchronous machines, IEEE Trans., EC-14, 4, 1999, pp. 1209–1217.
179. A. Keyhani, and H. Tsai, Identification of high order synchronous generator models from SSFR tests data, IEEE Trans., EC-9, 3, 1994, pp. 593–603.
180. S.D. Umans, I.A. Mallick, and G.L. Wilson, Modelling of solid iron turbogenerators, parts I and II, IEEE Trans., PAS-97, 1, 1978, pp. 269–298.
181. A. Watson, A systematic method to the determination of parameters of synchronous machine from results of frequency response tests, IEEE Trans., EC-15, 4, 2000, pp. 218–223.
182. Z. Zhao, F. Zheng, J. Gao, and L. Xu, A dynamic on-line parameter identification and full system experimental verification for large synchronous machine, IEEE Trans., EC-10, 3, 1995, pp. 392–398.
183. C.T. Huang, Y.F. Chen, C.L. Chang, Ch-Y. Huang, N.D. Chiang, and J. Ch. Wang, On line measurement based model parameter estimation for SG model development and identification schemes, parts I and II, IEEE Trans., EC-9, 2, 1994, pp. 330–343.
184. I. Boldea, and S.A. Nasar, Unified treatment core losses and saturation in the orthogonal axis model of electric machines, Proc. IEE, 134-B, 6, 1987, pp. 355–363.
185. Z. Zhao, L. Xu, and J. Jiang, On line estimation of variable parameters of synchronous machines using a novel adaptive algorithm, parts I and II and discussion, IEEE Trans., EC-12, 3, 1997, pp. 193–210.
186. H.B. Karayaka, A. Keyhani, G.T. Heydt, B.L. Agrawal, and D.A. Selin, Neural network based modeling of a large steam turbine-generator rotor body parameters from on-line disturbance data, IEEE Trans., EC-16, 4, 2001, pp. 305–311.
187. R. Wamkeue, I. Kamwa, X. Dai-Do, and A. Keyhani, Iteratively reweighted least squares for maximum likelihood identification of synchronous machine parameters from on line tests, IEEE Trans., EC-14, 2, 1999, pp. 156–166.
188. I. Kamwa, M. Pilote, H. Corle, P. Viarouge, B. Mpanda-Mabwe, and M. Crappe, Computer software to automate the graphical analysis of sudden shortcircuit oscillograms of large synchronous machines, parts I and II, IEEE Trans., EC-10, 3, 1995, pp. 399–414.