Seismic design, assessment and retrofitting of concrete buildings: Based on EN-Eurocode8

Geotechnical, Geological and Earthquake Engineering

Volumn 8, Issue , 2009, Pages 1-735

  Fardis, Michael N ^a  

^a UNIVERSITY OF PATRAS   (Greece)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84874367899     PISSN: 15736059     EISSN: 18724671     Source Type: Book Series    
DOI: 10.1007/978-1-4020-9842-0     Document Type: Article

References (274)

1. Aboutaha RS, Engelhardt MD, Jirsa JO, Kreger ME (1996a) Retrofit of concrete columns with inadequate lap splices by the use of rectangular steel jackets. Earthquake Spectra 12(4): 693-714
2. Aboutaha RS, Engelhardt MD, Jirsa JO, Kreger ME (1996b) Seismic retrofit of R/C columns using steel jackets. In: Sabnis GM et al. (ed) Seismic Rehabilitation of Concrete Structures.
3. ACI-SP160, American Concrete Institute, Detroit, MI, pp. 59-72
4. Aboutaha RS, Engelhardt MD, Jirsa JO, Kreger ME (1999) Rehabilitation of shear critical concrete columns by use of rectangular steel jackets. ACI Struct J 96(1): 68-78
5. Abrahamson NA, Litehiser JJ (1989) Attenuation of peak vertical acceleration. Bull Seismolog Soc Am 79: 549-580
6. Abrams D (1987) Influence of axial force variation on flexural behavior of reinforced concrete columns. ACI Struct J 84(3): 246-254
7. ACI (2003) ACI 440.IR-03 - Guide for the design and construction of concrete reinforced with FRP bars. ACI Committee 440, American Concrete Institute, Farmington Hills, MI
8. ACI (2008) Building code requirements for structural concrete and commentary. American Concrete Institute, Farmington Hills, MI
9. ACI Committee 408 (2001) Splice and development length of high relative rib area reinforcing bars. American Concrete Institute, Farmington Hills, MI
10. ACI Committee 440 (2002) Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. American Concrete Institute, Farmington Hills, MI
11. ACI-ASCE Committee 352 (1988) Recommendations for design of slab-column connections in monotonic reinforced concrete structures. ACI Struct J 85(6): 675-696
12. AIJ (1992) AIJ standard for structural calculation of reinforced concrete structures, Architectural Institute of Japan, Tokyo
13. AIJ (1994) AIJ structural design guidelines for reinforced concrete buildings, Architectural Institute of Japan, Tokyo
14. Aktan A, Pecknold D, Sozen MA (1974) R/C column earthquake response in two dimensions. ASCE J Struct Div 100(ST10): 1999-2015
15. Alca N, Alexander SDB, MacGregor JG (1997) Effect of size on flexural behavior of high-strength concrete beams. ACI Struct J 94(1): 59-66
16. Alcocer SM (1992) Rehabilitation of RC frame connections using jacketing. 10th World Conference on Earthquake Engineering, Madrid, Balkema, Rottterdam, pp. 5235-5240
17. Alcocer SM, Jirsa JO (1993) Strength of reinforced concrete frame connections rehabilitated by jacketing. ACI Struct J 90(3): 249-261
18. Ambraseys NN, Simpson KA (1996) Prediction of vertical response spectra in Europe. Earthquake Eng Struct Dyn 25(4): 401-412
19. Anagnostopoulos SA (1972) Nonlinear dynamic response and ductility requirements of building structures subjected to earthquakes. Res. Report R72-54, Department of Civil Engineering, Massachusetts Institute of Technology, Cambridge, MA
20. ASCE (2003) ASCE/SEI Standard 31-03, Seismic evaluation of existing buildings. American Society of Civil Engineers, Reston, VA
21. ASCE (2007) ASCE/SEI Standard 41-06, Seismic rehabilitation of existing buildings (including Supplement 1). American Society of Civil Engineers, Reston, VA
22. Ascheim MA, Moehle JP (1992) Shear strength and deformability of RC bridge columns subjected to inelastic cyclic displacements. Rep. UCB/EERC-92/04, Earthquake Engineering Research Center, University of California, Berkeley, CA
23. ATC (1988) Rapid visual screening of buildings for potential seismic hazards: A manual. ATC-21
24. Applied Technology Council for the Federal Emergency Management Agency (FEMA Report 154), Washington, DC
25. ATC (1997) NEHRP Guidelines for the seismic rehabilitation of buildings. Applied Technology Council for the Building Seismic Safety Council and the Federal Emergency Management Agency (FEMA Reports 273, 274), Washington, DC
26. ATC (1998) Evaluation of earthquake damaged concrete and masonry wall buildings. Applied Technology Council for the Federal Emergency Management Agency (FEMA Reports 306, 307), Washington, DC
27. Aziz TS (1976) Inelastic dynamic analysis of building frames. Res. Report R76-37, Department of Civil Engineering, Massachusetts Institute of Technology, Cambridge, MA
28. Balázs GL (1989) Bond softening under reversed load cycles. Studi e Ricerche, Politecnico di Milano, No. 11, Milano, pp. 503-524
29. Balázs GL (1991) Fatigue of bond. ACI Mater J 88(6): 620-629
30. Benjamin JR, Cornell CA (1970) Probability, Statistics and Decision for Civil Engineers. McGraw Hill, New York
31. Bigaj A, Walraven JC (1993) Size effect on rotational capacity of plastic hinges in reinforced concrete beams. Ductility-Reinforcement, CEB Bulletin d' Information No. 218, pp. 7-23
32. Biskinis DE (2007) Resistance and deformation capacity of concrete memberswith or without retrofitting. Doctoral Thesis,Civil EngineeringDepartment, University of Patras, Patras, GR
33. Biskinis DE, Fardis MN (2004) Cyclic strength and deformation capacity of RC members, including members retrofitted for earthquake resistance. In: Walraven J et al. (ed) 5th International Ph.D Symposium in Civil Engineering, Balkema, Rotterdam, pp. 1125-1133
34. Biskinis DE, Fardis MN (2007) Effect of lap splices on flexural resistance and cyclic deformation capacity of members. Beton- und Stahlbetonbau, Sonderheft Englisch 102: 51-59
35. Biskinis DE, Fardis MN (2009) Upgrading of resistance and cyclic deformation capacity of deficient concrete columns. In: Ilki A et al. (ed) Seismic Risk Assessment and Retrofitting, with Special Emphasis on Existing Low Rise Structures, Springer Verlag, Heidelberg
36. Biskinis DE, Roupakias G, Fardis MN (2004) Degradation of shear strength of RC members with inelastic cyclic displacements. ACI Struct J 101(6): 773-783
37. Bommer JJ, Elnashai AS (1999) Displacement spectra for seismic design. J Earthquake Eng 3(1): 1-32
38. Bosco C, Debernardi PG (1993) Influence of some basic parameters on the plastic rotation of reinforced concrete elements. Ductility-Reinforcement, CEB Bulletin d' Information No. 218, pp. 25-44
39. Bousias SN (1993) Experimental and analytical study of RC columns in cyclic biaxial bending with axial force. Doctoral thesis, Civil Engineering Department, University of Patras, Patras, GR
40. Bousias SN, Fardis MN (1994) Inelastic R.C. section and member model for general biaxial bending with axial force. In: Mang H et al. (ed) EURO-C 1994, Pineridge Press, Swansea, UK, pp. 795-804
41. Bousias SN, Panagiotakos TB, Fardis MN (2002) Modelling of RC members under cyclic biaxial flexure and axial force. J Earthquake Eng 6(3): 213-238
42. Bousias SN, Fardis MN, Biskinis DE (2005a) Retrofitting of RC columns with deficient lapsplices. In: Balazs GL, Borosnyoi A (eds) fib Symposium: Keep concrete attractive, Budapest, pp. 885-890
43. Bousias SN, Spathis L-A, Fardis MN (2007a) Seismic retrofitting of columns with lap-spliced smooth bars through FRP or concrete jackets. J Earthquake Eng 11(5): 653-674
44. Bousias SN, Verzeletti G, Fardis MN, Magonette G (1992) Reinforced concrete columns in cyclic biaxial bending and axial load. 10th World Conference on Earthquake Engineering, Balkema, Rotterdam, pp. 3041-3049
45. Bousias SN, Verzeletti G, Fardis MN, Gutierrez E (1995) Load-path effects on column biaxial bending with axial force. ASCE Eng Mech J 121(5): 596-605
46. Bousias SN, Fardis MN, Spathis L-A, Biskinis DE (2005b) Shotcrete or FRP jacketing of concrete columns for seismic retrofitting. In: Wasti ST, Ozcebe G (eds) Advances in Earthquake Engineering for Urban Risk Reduction, Springer, Dordrecht, NL, pp. 33-46
47. Bousias SN, Biskinis DE, Fardis MN, Spathis L-A (2007b) Strength, stiffness and cyclic deformation capacity of concrete jacketed members. ACI Struct J 104(5): 521-531
48. Bousias SN, Spathis L-A, Fardis MN, Papanicolaou CG, Triantafillou TC (2007c) Pseudodynamic tests of non-seismically designed RC structures retrofitted with textile-reinforced mortar. In: Triantafillou TC (ed) 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-8), Patras, GR, paper 17-12
49. Bracci JM, Kunnath SK, Reinhorn AM (1997) Seismic performance and retrofit evaluation for reinforced concrete structures. ASCE J Struct Eng 123(1): 3-10
50. BSSC (2003) NEHRP recommended provisions for seismic regulations for new buildings and other structures. Building Seismic Safety Council for the Federal Emergency Management Agency (FEMA Rep. 368, 369), Washington, DC
51. Cairns J (2006) Proposals of fib TG4.5 for bond anchorage in the new fib Model code. Federation internationale du beton, Lausanne
52. Calvi GM, Grossi V, Magenes G (1994) First report on the characteristics of reinforcing steel available in Italy. Univ. di Pavia contribution to 1st PREC8 Topic 1 annual report, Universita di Pavia, Pavia, IT
53. Carvalho EC (1995) Prenormative research in support of Eurocode 8. In: Elnashai A (ed) 5th SECED Conference: European Seismic Design Practice - Research and Application, Balkema, Rotterdam, pp. 43-50
54. Carvalho E, Pipa M (1994) Short note on the characteristics of B400 and B500 Tempcore bars produced in Europe and its comparison with Eurocode 8 requirements - Mechanical characteristics of reinforced steel bars manufactured in Portugal. LNEC contribution to 1st PREC8 Topic 1 annual report, Laboratorio Nacional de Engenharia Civil (LNEC), Lisbon
55. Carvalho EC, Coelho E (1997) Numerical investigations on the seismic response of R.C. frames designed in accordance with Eurocode 8. ECOEST-PREC8 Rep. 7. Laboratorio Nacional de Engenharia Civil (LNEC), Lisbon
56. CEB (1970) CEB-FIP International Recommendations for the design and construction of concrete structures: 1 Principles and Recommendations, Bulletin No. 72. Comite Euro-international du Beton, Paris
57. CEB (1985) CEB Model Code for seismic design of concrete structures, Bulletin No. 165. Comite Euro-International du Beton, Lausanne
58. CEB (1988a) Concrete structures under impact and impulsive loading, Bull. d' Information No. 187. Comite Euro-International du Beton, Lausanne
59. CEB (1988b) General principles on reliability of structures: A commentary on ISO 2394, Bulletin No. 191. Comite Euro-International du Beton, Lausanne
60. CEB (1991) CEB-FIP Model Code 1990, Bull. d' Information No. 203/204/205. Comite Euro-International du Beton, Lausanne
61. CEB (1996a) RC frames under earthquake loading, T. Telford, London, for Comite Eurointernational du Beton, Lausanne
62. CEB (1996b) RC elements under earthquake loading, T. Telford, London, for Comite Eurointernational du Beton, Lausanne
63. CEN (1996) European prestandard ENV 1998-1-4: Eurocode 8: Design provisions for earthquake resistance of structures, Part 1-4: Strengthening and repair of buildings. Comite Europeen de Normalisation, Brusells
64. CEN (2002) European Standard EN 1990:2002 Eurocode: Basis of structural design. Comite Europeen de Normalisation, Brusells
65. CEN (2003) European Standard EN 1997-1:2003 Eurocode 7: Geotechnical design - Part 1: General rules. Comite Europeen de Normalisation, Brusells
66. CEN (2004a) European Standard EN 1998-1:2004 Eurocode 8: Design of structures for earthquake resistance, Part 1: General rules, seismic actions and rules for buildings. Comite Europeen de Normalisation, Brusells
67. CEN (2004b) European Standard EN1992-1-1:2004 Eurocode 2: Design of concrete structures, Part 1-1: General rules and rules for buildings. Comite Europeen de Normalisation, Brusells
68. CEN (2004c) European Standard EN 1998-5:2004 Eurocode 8: Design of structures for earthquake resistance, Part 5: Foundations, retaining structures, geotechnical aspects. Comite Europeen de Normalisation, Brusells
69. CEN (2005a) European Standard EN 1998-3:2005 Eurocode 8: Design of structures for earthquake resistance, Part 3: Assessment and retrofitting of buildings. Comite Europeen de Normalisation, Brusells
70. CEN (2005b). European Standard EN 1998-2:2005 Eurocode 8: Design of structures for earthquake resistance, Part 2: Bridges. Comite Europeen de Normalisation, Brusells
71. Cheung VW, Tso WK (1986) Eccentricity in irregular multistory buildings. Canadian J Civil Eng 13(1): 46-52
72. Chopra A (2007) Dynamics of structures. Theory and applications to earthquake engineering. Prentice Hall, Englewood Cliffs, NJ
73. Chopra AK, Goel RK (2002) A modal pushover analysis procedure for estimating seismic demands for buildings. Earthquake Eng Struct Dyn 31(3): 561-582
74. Chopra AK, Goel RK (2004) A modal pushover analysis procedure to estimate seismic demands of unsymmetric plan buildings. Earthquake Eng Struct Dyn 33(8): 903-927
75. Chopra AK, Goel RK, Chintanapakdee C (2004) Evaluation of a modified MPA procedure assuming higher modes as elastic to estimate seismic demands. Earthquake Spectra 20(3): 757-778
76. Clough R, Johnston S (1966) Effect of stiffness degradation on earthquake ductility requirements. Transactions of Japan Earthquake Engineering Symposium, Tokyo, pp. 195-198
77. Clough RW, Benuska KL, Wilson EL (1965) Inelastic earthquake response of tall buildings. 3rd World Conference on Earthquake Engineering, Auckland, NZ, V 11
78. th European Conference on Earthquake Engineering, Moscow
79. Costa AC, Costa AG (1987). Hysteretic model of force-displacement relationships for seismic analysis of structures. Res. Report, Laboratorio Nacional de Engenharia Civil, Lisbon
80. Crémer C (2001) Modélisation du comportement nonlinéaire des fondations superficielles sous séisme. Macro-élément d'interaction sol-structure. Thèse de doctorat, Laboratoire de Mécanique et de Technologie de Cachan. ENS Cachan, Paris
81. Darwin D, Zuo J, McCabe SL (2002a) Descriptive equations for development and splice strength of straight reinforcing bars. In: Balazs GL et al. (ed) 3rd International Symposium: Bond in Concrete - from Research to Standards, Budapest, pp. 501-508
82. Darwin D, McCabe SL, Browning J-A, Matamoros A, Zuo J (2002b) Evaluation of development length design expressions. In: Balazs GL et al. (ed) 3rd International Symposium: Bond in Concrete - from Research to Standards, Budapest, pp. 747-754
83. De Lorenzis L, Tepfers R (2001) A comparative study of models on confinement of concrete cylinders with FRP composites. Publ. No. 01/04, Dept. of Building Materials, Chalmers University of Technology, Göteborg
84. Der Kiureghian A (1981) A response spectrum method for random vibration analysis of MDF systems. Earthquake Eng Struct Dyn 9: 419-435
85. nd International Symposium on Composite Materials and Structures, Beijing University Press, Beijing, pp. 958-963
86. Eibl J, Keintzel E (1988) Seismic shear forces in cantilever shear walls. 9th World Conference in Earthquake Engineering, Tokyo/Kyoto
87. Eligehausen R, Lettow S (2007) Formulation of Application Rules for Lap Splices in the New fib Model Code, federation internationale du beton, Stuttgart
88. Elnashai AS (1994) Characteristics of reinforcing steel in the United Kingdom. Imperial College contribution to 1st PREC8 Topic 1 annual report, Imperial College of Science, Technology and Medicine, London, UK
89. Elnashai AS (2001) Advanced inelastic static (pushover) analysis for earthquake applications. Struct Eng Mech 12(1): 51-69
90. Elnashai AS, Papazoglou AJ (1997) Procedure and spectra for analysis of RC structures subjected to strong vertical earthquake loads. J Earthquake Eng 1(1): 121-155
91. nd Annual Engineering Mechanics Division Specialty Conference, pp. 40-43
92. Elwi AA, Murray DW (1979) A 3D hypoelastic concrete constitutive relationship. ASCE J Eng Mech Div 105(EM4): 623-641
93. Elwood KJ, Moehle JP (2001) Shake-table tests on the gravity load collapse of reinforced concrete frames. In: Kabeyasawa T, Moehle JP (eds) 3rd US-Japan Workshop on Performance-Based Earthquake Engineering Methodology for Reinforced Concrete Building Structures, PEER-2002/02, Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA
94. Faccioli E, Vanini M, Frassine L (2002) Complex site effects in earthquake ground motion, including topography. 12th European Conference on Earthquake Engineering, London, paper 844
95. Fajfar P (2000) A nonlinear analysis method for performance-based seismic design. Earthquake Spectra 16(3): 573-593
96. Fajfar P, Marušić D, Peruš I (2005) Torsional effects in the pushover-based seismic analysis of buildings. J Earthquake Eng 9: 831-854
97. Fajfar P, Dolšek M, Marušić D, Peruš I (2004) Extensions of the N2 method - asymmetric buildings, infilled frames and incremental N2. In: Fajfar P, Krawinkler H (eds) Performance-Based Seismic Design Concepts and Implementation, PEER Rep. 2004/05, PEER, University of California, Berkeley, CA, pp. 357-368
98. Fardis MN (1991) Member-type models for the nonlinear seismic response analysis of reinforced concrete structures. In: Donea J, Jones PM (eds) Experimental and Numerical Methods in Earthquake Engineering, Kluwer Academic Publishers, Dordrecht, NL, pp. 247-280
99. Fardis MN (1997) Chaper 9: Reinforced concrete structures. In: Beskos D, Anagnostopoulos SA (eds) Computer Analysis and Design of Earthquake Resistant Structures - A Handbook. Computational Mechanics Publications, Southampton, pp. 441-532
100. Fardis MN (1998) Seismic assessment and retrofit of RC structures. In: Bisch P et al. (ed) Invited Lectures, 11th European Conference on Earthquake Engineering, Paris, Balkema, Rottterdam, pp. 131-150
101. Fardis MN (2000) Design provisions for masonry-infilled RC frames. 12th World Conference on Earthquake Engineering, Auckland, NZ, paper 2553
102. Fardis MN (2001) Displacement-based seismic assessment and retrofit of reinforced concrete buildings. In: Bösch K et al. (ed) Seismic Assessment and Upgrading of Existing Structures, 20th European Regional Earthquake Engineering Seminar, European Association of Earthquake Engineering, pp. 67-86
103. Fardis MN (2004) A European Perspective for Performance-Based Seismic Design, In: Fajfar P, Krawinkler H (eds) Performance-Based Seismic Design Concepts and Implementation, PEER Rep. 2004/05, PEER, University of California, Berkeley, CA, pp. 1-13
104. Fardis MN, Buyukozturk O (1979) A shear transfer model for reinforced concrete. ASCE J Eng Mech Div 105(EM2): 255-275
105. Fardis MN, Khalili HH (1981) Concrete encased in fiberglass-reinforced plastic. ACI J 78(6): 440-446
106. Fardis MN, Khalili HH (1982). FRP-encased concrete as a structural material, Mag Concr Res 34(121): 191-202
107. Fardis MN, Kosmopoulos A (2007) Practical implementation of seismic assessment method in Eurocode 8 - Part 3, with linear or nonlinear analysis and deformation-based verification using empirical chord rotation capacity expressions. 6th National Conference on Earthquake Engineering, Istanbul, Vol. 3, pp. 69-101
108. th World Conference on Earthquake Engineering, Acapulco, MX, paper 464
109. Fardis MN, Panagiotakos TB (1997a) Seismic design and response of bare and infilled reinforced concrete buildings - Part I: Bare structures. J Earthquake Eng 1(1): 219-256
110. Fardis MN, Panagiotakos TB (1997b) Seismic design and response of bare and infilled reinforced concrete buildings - Part II: Infilled structures. J Earthquake Eng 1(3): 473-503
111. Fardis MN, Panagiotakos TB (1997c) Displacement-based design of RC buildings: Proposed approach and application. In: Fajfar P and Krawinkler H (eds) Seismic Design Methodologies for the Next Generation of Codes, Balkema, Rotterdam, pp. 195-206
112. Fardis MN, Skouteropoulou A-M, Bousias SN (1987) Stiffness matrix of free-standing helical stairs. ASCE J Struct Eng 113(1): 74-87
113. Fardis MN, Bousias SN, Franchioni G, Panagiotakos TB (1999a) Seismic response and design of RC structures with plan-eccentric masonry infills. Earthquake Eng Struct Dyn 28: 173-191
114. Fardis MN, Negro P, Bousias SN, Colombo A (1999b) Seismic design of open-story infilled RC buildings. J Earthquake Eng 3(1): 173-198
115. Fardis MN, Panagiotakos TB, Biskinis DE, Kosmopoulos A (2003) Seismic assessment of existing RC buildings. In: Wasti ST, Ozcebe G (eds) Seismic Assessment and Rehabilitation of Existing RC Buildings, Kluwer Academic Publishers, Dordrecht, NL, pp. 215-244
116. Fardis MN, Biskinis DE, Kosmopoulos AJ, Bousias SN, Spathis L-A (2005) Seismic retrofitting techniques for concrete buildings. In: Fardis MN, Negro P (eds) SPEARWorkshop - An Event to Honour the Memory of J Donea. EUR 21768 EN, European Commission, JRC, Ispra, IT, pp. 229-240
117. fib (2001) Externally bonded FRP reinforcement for RC structures, fib Bulletin 14, Lausanne
118. fib (2003) Seismic assessment and retrofit of RC buildings, fib Bulletin 24, Federation Internationale du Beton, Lausanne
119. fib (2006) Retrofitting of concrete structures through externally bonded FRPs, with emphasis on seismic applications, fib Bulletin 35, Federation Internationale du Beton, Lausanne
120. fib (2007) FRP Reinforcement in RC Structures, fib Bulletin 40, Federation Internationale du Beton, Lausanne
121. fib (2008) A practitioner's guide to computer-based modelling of structural concrete. Bulletin No. 45, Federation Internationale du Beton, Lausanne
122. Filippou FC, Issa A (1988) Nonlinear analysis of reinforced concrete frames under cyclic load reversals. Rep. UCB/EERC 88-12, Earthquake Engineering Research Center, University of California, Berkeley, CA
123. Frankel A, Mueller C, Barnhard T, Perkins D, Leyendecker EV, Dickman N, Hanson S, Happer M (1996) National seismic hazard maps: Documentation, USGS Open-file Report 96-532, Denver, CO
124. Frankel A, Mueller C, Barnhard T, Perkins D, Leyendecker EV, Dickman N, Hanson S, Happer M (1997) Seismic hazard maps for the conterminus United States, USGS Open-file Report 97-131, Denver, CO
125. French CW, Schultz AE (1991) Minimum available deformation capacity of reinforced concrete beams. In: Ghosh SK (ed) ACI Special Publication SP127, American Concrete Institute, Detroit, MI, pp. 363-410
126. Fujikake K, Mindess S, Xu H (2004) Analytical model for concrete confined with fiber-reinforced polymer composite. ASCE J Composite Construct 3(3): 143-150
127. Garstka B (1993) Untersuchungen zum Trag- und Schädigungsverhalten Stabförmiger Stahlbetonbauteile mit Berücksichtigung des Schubeinflusses bei Zyklischer Nichtlinearer Beanspruchung. Dissertation, Ruhr-Universität Bochum, Bochum, DE
128. Gasparini DA, Vanmarcke EH (1976) Simulated earthquake motions compatible with prescribed response spectra. Res. Report R76-4, Department of Civil Engineering, Massachusetts Institute of Technology, Cambridge, MA
129. Gazetas G, Anastasopoulos I (2007) Overturning of buildings in Adapazari during the 1999 Kocaeli earthquake. 6th National Earthquake Engineering Conference, Istanbul, Vol. 3, pp. 43-49
130. Ghobarah A, Biddah A, Mahgoub M (1997) Rehabilitation of reinforced concrete columns using corrugated steel jacketing. J Earthquake Eng 1(4): 651-673
131. Giannakas A, Patronis D, Fardis MN (1987) Influence of location and size of openings on elastic stiffness of infill walls. 8th Greek Concrete Conference, Kavala, Greece, Vol. II, pp. 49-56
132. Giberson MF (1967) The response of nonlinear multi-story structures subjected to earthquake excitation. Ph.D. Thesis, California Institute of Technology, Pasadena, CA
133. Gupta AK, Singh MP (1977) Design of column sections subjected to three components of earthquake. Nucl Eng Des 41: 129-133
134. Gupta B, Kunnath SK (2000) Adaptive spectra-based pushover procedure for seismic evaluation of structures. Earthquake Spectra 16(2): 367-392
135. Horvath JS (1983) Modulus of subgrade reaction: new perspective. ASCE J Geotech Eng Div 109(GT12): 1567-1587
136. Huang Z, Engström B, Magnusson J (1996) Experimental and analytical studies of the bond behaviour of deformed bars in high strength concrete. 4th International Symposium on the Utilization of High Strength/High Performance Concrete, Vol. 3. Laboratories des Ponts et Chaussees, Paris.
137. ICBO (1997) Uniform Building Code. International Conference of Building Officials, Whitier, CA
138. ICC (2006) International Building Code. International Code Council, Falls Church, VA
139. Imai K, Korenaga T, Takiguchi K (2005) Compressive properties of concrete and flexural strength around critical section of reinforced concrete members. AIJ J Struct Construct Eng 587: 189-196
140. Inoue S, Tanabe A (2006) Seismic performance improvement of reinforced concrete columns by partial prestressing, 2nd fib Congress, Napoli, paper 9-35
141. Izzuddin BA, Elnashai AS (1989) ADAPTIC: A program for the adaptive dynamic analysis of space frames. Rep. ESEE-89/7, Imperial College Imperial College of Science, Technology and Medicine, London, UK
142. JBDPA (1977) Standard for evaluation of seismic capacity and guidelines for seismic retrofit design of existing reinforced concrete buildings. Japan Building Disaster Prevention Association (revised 1990), Tokyo
143. JBDPA (1999) Seismic retrofit design and construction guidelines for existing reinforced concrete and steel encased reinforced concrete buildings using continuous fibre reinforcing materials. Japan Building Disaster Prevention Association, Tokyo.
144. JCI (2007) Seismic rehabilitation of concrete structures. In: Sugano S (ed) International Publication Series IPS-2, American Concrete Institute, Farmington Hills, MI
145. JPCEA (2002) Seismic design code for prestressed concrete structures. Japan Prestressed Concrete Engineering Association, Tokyo
146. JSCE (1997) Recommendation for design and construction of concrete structures using continuous fibre reinforcing materials. Research Committee on Continuous Fiber Reinforcing Materials, Japan Society of Civil Engineers, Tokyo
147. JSCE (2001). Recommendations for upgrading of concrete structures with use of continuous fiber sheets. In: Maruyama K (ed), JSCE 292 Committee on Concrete Structures with Externally Bonded Continuous Fiber Reinforcing Materials, Japan Society of Civil Engineers, Tokyo
148. Kaba S, Mahin SA (1984) Refined modeling of reinforced concrete columns for seismic analysis. Rep. UCB/EERC 84-3, Earthquake Engineering Research Center, University of California, Berkeley, CA
149. Kakaletsis DJ, Karayannis CG (2008) Influence of masonry strength and openings on infilled RC frames under cyclic loading. J Earthquake Eng 12(2): 197-221
150. Kaku T, Asakusa H (1991) Bond and anchorage of bars in reinforced concrete beam-column joints. ACI Special Publication SP123, American Concrete Institute, Detroit, MI pp. 401-424
151. Karbhari VM, Chin JW, Dunston D, Benmokrane B, Juska T, Morgan R, Lesko JJ, Sorathia U, Reynaud D (2003) Durability gap analysis for fiber-reinforced polymer composites in civil infrastructure. ASCE J Composite Construct 7(3): 238-247
152. Karsan DI (1968) Behavior of plain concrete under variable load histories. Ph.D. Thesis, Rice University, Houston, TX
153. Kausel E, Roesset JM (1975) Dynamic stiffness of circular foundations, ASCE J Eng Mech Division l01(EM6): 771-785
154. Keintzel E (1990) Seismic design shear forces in reinforced concrete cantilever shear wall structures. European J Earthquake Eng 3(1): 7-16
155. Kitayama K, Otani S, Aoyama H (1991) Development of design criteria for RC interior beamcolumn joints. ACI Special Publication SP123, American Concrete Institute, Detroit, MI, pp. 97-124.
156. Kosmopoulos AJ, Fardis MN (2004) Seismic testing of 3-storey full-scale torsionally unbalanced RC structure: Pre-test predictions, design and analyses of retrofitting. In:Walraven J et al. (ed) 5th International Ph.D Symposium in Civil Engineering, Balkema, Rotterdam, pp. 1115-1123
157. Kosmopoulos AJ, Fardis MN (2006) Seismic evaluation of strongly irregular and torsionally unbalanced concrete buildings, 2nd fib Congress, Napoli, paper 9-14
158. Kosmopoulos AJ, Fardis MN (2007) Estimation of inelastic seismic deformations in asymmetric multistory RC buildings. Earthquake Eng Struct Dyn 36(9): 1209-1234
159. Kosmopoulos AJ, Fardis MN (2008) Simple models for inelastic seismic analysis of asymmetric multistory RC buildings, J Earthquake Eng, 12(5): 704-727
160. Kosmopoulos A, Bousias SN, Fardis MN (2003) Design and pre-test assessment of 3-storey torsionally-unbalanced RC test structure, fib 2003 Symposium: Concrete Structures in Seismic Regions, Athens, GR, paper 123
161. Kosmopoulos A, Bousias SN, Fardis MN (2007) Seismic Rehabilitation of a Theater Facility according to Eurocode 8 using CFRPs. In: Triantafillou TC (ed) 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-8), Patras, GR, paper 15-8
162. Kowalsky MJ, Priestley MJN (2000) Improved analytical model for shear strength of circular reinforced concrete columns in seismic regions. ACI Struct J 97(3): 388-396
163. Kwan AK (1993) Improved wide-column-frame analogy for shear/core wall analysis. ASCE J Struct Eng 119(2): 420-439
164. Lam L, Teng JG (2003a) Design-oriented stress-strain model for FRP-confined concrete. Construct Build Mater 17(6&7): 471-489
165. Lam L, Teng JG (2003b) Design-oriented stress-strain model for FRP-confined concrete in rectangular columns. J Reinforc Plast Compos 22(13): 1149-1186
166. Litton RW(1975) A contribution to the analysis of concrete structures under cyclic loading. Ph.D. Thesis, Department of Civil Engineering, University of California, Berkeley, CA
167. Ma SM, Bertero VV, Popov EP (1976) Experimental and analytical studies on hysteretic behavior of reinforced concrete rectangular and T-beams. Rep. EERC 76-2, Earthquake Engineering Research Center, University of California, Berkeley, CA
168. Mahasuverachai M, Powell GH (1982) Inelastic analysis of piping and tubular structures, Rep. UCB/EERC 82-27, Earthquake Engineering Research Center, University of California, Berkeley, CA
169. Mainstone RJ (1971) On the stiffnesses and strengths of infilled frames. Proceedings of Institution of Civil Engineers v 7360s
170. Mander JB, Priestley MJN, Park R (1988) Theoretical stress-strain model for confined concrete. ASCE J Struct Eng 114(8): 1804-1826
171. Mark K (1976) Nonlinear dynamic response of reinforced concrete frames. Res. Report R76-38, Department of Civil Engineering, Massachusetts Institute of Technology, Cambridge, MA
172. Marušić D, Fajfar P (2005) On the inelastic seismic response of asymmetric buildings under biaxial excitation. Earthquake Eng Struct Dyn 34(8): 943-963
173. Menegotto M, Pinto PE (1973) Method of analysis for cyclically loaded RC plane frames including changes in geometry and non-elastic behaviour of elements under combined normal force and bending. Preliminary Report, International Association of Bridge and Structural Engineering, Vol. 13, pp. 15-22
174. Millard A (1993) CASTEM 2000 Manuel d' utilisation. Rapp. CEA-LAMS No. 93/007, Saclay, FR
175. Moehle JP (1996) Seismic design considerations for flat-plate construction. ACI Special Publication SP-162, American Concrete Institute, Farmington Hills, MI pp. 1-34
176. Moehle JP, Kreger ME, Leon R (1988) Background to recommendations for design of reinforced concrete slab-column connections. ACI Struct J 85(6): 636-644
177. Moehle JP, Lynn A, Elwood K, Sezen H (2001) Gravity load collapse of building frames during earthquakes. PEER Report: 2nd US-Japan Workshop on Performance-based Design Methodology for Reinforced Concrete Building Structures. PEER Center, Richmond, CA
178. Mola E, Negro P (2005) Full-scale PsD testing of the torsionally unbalanced SPEAR structure in the as-built and retrofitted configurations. In: Fardis MN, Negro P (eds) SPEAR Workshop - An event to honour the memory of J Donea. EUR 21768 EN, European Commission, JRC, Ispra, IT, pp. 139-154
179. Molina FJ, Buchet P, Magonette GE, Hubert O, Negro P (2005) Full-scale bidirectional PsD testing of the torsionally unbalanced SPEAR structure: Method, algorithm and experimental setup, In: FardisMN, Negro P (eds) SPEARWorkshop - An event to honour the memory of J Donea. EUR 21768 EN, European Commission, JRC, Ispra, IT, pp. 155-172.
180. Mondkar DP, Powel GH (1975) ANSR-I General Purpose Program for Analysis of Structural Response. Rep. UCB/EERC 75-37, Earthquake Engineering Research Center, University of California, Berkeley, CA
181. Monti G, Nuti C (1991) Analytical model of cyclic behaviour of reinforcing bars with inelastic buckling. Rapp. No. 91/06, Università di Roma La Sapienza, Roma
182. Monti G, Liotta MA (2005) FRP-strengthening in shear: tests and design equations. 7th International Symposium on Fibre-Reinforced Polymer (FRP) Reinforcement for Concrete Structures (FRPRCS-7), Kansas City, MO
183. Nakano Y (1995) Damage to buildings due to 1994 Sanriku-harukaoki earthquake. Building Disaster 211, Japan Building Disaster Prevention Association, pp. 6-15
184. Newman K, Newman JB (1971) Failure theories and design criteria for plain concrete. In: Te'eni (ed) Structure, Solid Mechanics and Engineering Design, J. Wiley-Interscience, New York
185. Newmark NM (1959) A method of computation for structural dynamics, ASCE J Eng Mech Div 85: 67-94
186. Oh BH, Kim SH (2007) Realistic models for local bond stress-slip of reinforced concrete under repeated loading. ASCE J Struct Eng 133(2): 216-224
187. Ohta Y, Goto N (1976) Estimation of S-wave velocity in terms of characteristic indices of soil. Butsuri-Tanko 29(4): 34-41
188. Otani S (1974) Inelastic analysis of R/C frame structures. ASCE J Struct Div 100(ST7): 1433-1449
189. Pan A, Moehle JP (1989) Lateral displacement ductility of reinforced concrete flat plates. ACI Struct J 86(3): 250-271
190. Panagiotakos TB, Fardis MN (1994) Proposed nonlinear strut models for infill panels. 1st year progress report of PREC8 project. University of Patras, Patras, GR
191. Panagiotakos TB, Fardis MN (1998) Effect of column capacity design on earthquake response of reinforced concrete buildings. J Earthquake Eng 2(1): 113-145
192. Panagiotakos TB, Fardis MN (1999a) Estimation of inelastic deformation demands in multistory RC buildings. Earthquake Eng Struct Dyn 28: 501-528
193. Panagiotakos TB, Fardis MN (1999b) Deformation-controlled earthquake resistant design of RC buildings. J Earthquake Eng 3(4): 495-518
194. Panagiotakos TB, Fardis MN (2001a) Deformations of RC members at yielding and ultimate. ACI Struct J 98(2): 135-148
195. Panagiotakos TB, Fardis MN (2001b) Nonlinear modelling of wall uplift and rocking. Report to SAFERR project, University of Patras, GR
196. Panagiotakos TB, Fardis MN (2001c) A displacement-based seismic design procedure of RC buildings and comparison with EC8. Earthquake Eng Struct Dyn 30: 1439-1462
197. Panagiotakos TB, Fardis MN (2003) Performance of RC frame buildings designed for alternative Ductility Classes according to Eurocode 8 (Final Version, 2003). 5th US-Japan Workshop on performance-based earthquake engineering methodology for reinforced concrete building structures. Hakone, Japan
198. Panagiotakos TB, Fardis MN (2004) Seismic performance of RC frame buildings designed to the three Ductility Classes of EN1998 (Eurocode 8) or the Greek Codes 2000. Bull Earthquake Eng 2(2): 221-259
199. Pantazopoulou SJ (1995) Role of expansion on mechanical behavior of concrete. ASCE J Struct Eng 121(12): 1795-1805
200. Pantazopoulou SJ (1998) Detailing for reinforcement stability in RC members. ASCE J Struct Eng 124(6): 623-632
201. Pantazopoulou SJ, Bonacci JF (1994) On earthquake resistant RC frame connections. Canadian J Civil Eng 21(2): 307-328
202. Paolluci R (2002) Amplification of earthquake ground motion by steep topographic irregularities. Earthquake Eng Struct Dyn 31: 1831-1853
203. Paolluci R (2006) Numerical investigation of 3D seismic amplification by steep topographic profiles and check of the EC8 topographic amplification coefficients. In: Bouckovalas G (ed) General Report Proceedings of the Athens Workshop, ETC12. Geotechnical Evaluation and Application of the Seismic Eurocode EC8, National Technical University of Athens, pp. 187-191
204. Park R, Paulay T (1975) Reinforced concrete structures. J. Wiley, New York
205. Park YJ, Reinhorn AM, Kunnath SK (1987) IDARC: Inelastic damage analysis of reinforced concrete frame-shear-wall structures. Technical Report NCEER-87-0008, National Center for Earthquake Engineering Research, State University of New York, Buffalo, NY
206. Paulay T, Priestley MJN (1992) Seismic design of reinforced concrete and masonry buildings, J. Wiley, New York
207. Perdikaris P (1980) Stiffness and strength of biaxially tensioned orthogonally reinforced concrete panels subjected to membrane shear. Ph.D Thesis, Civil Engineering Department, Cornell University, Ithaca, NY
208. Peruš I, Fajfar P (2005) On the inelastic torsional response of single-storey structures under biaxial excitation. Earthquake Eng Struct Dyn 34(8): 931-941
209. Pipa M, Carvalho EC (1994) Reinforcing steel characteristics for earthquake resistant structures. In: Duma G (ed) 10th European Conference on Earthquake Engineering, Balkema, Rotterdam, pp. 2887-2892
210. Pires FMG (1990) Influencia das paredes de alvbenaria no comportamento de estruturas reticuladas de betao armado sueitas a accoes horizontais. Res. Report, Laboratorio Nacional de Engenharia Civil, Lisbon
211. Plumier A, Vangelatou O (1995) Synthesis of the statistical data on reinforcing steel collected in Europe and comparison to the Eurocode 8 requirements. Internal PREC8 report No. 4, Universite de Liege, Liege, BE
212. Priestley MJN (1997) Displacement-based seismic assessment of reinforced concrete buildings. J Earthquake Eng, 1(1): 157-192
213. Reinhorn AM, Kunnath SK, Panahshahi N (1988) Modelling of RC building structures with flexible floor diaphragms (IDARC 2). Technical Report NCEER-88-0035, National Center for Earthquake Engineering Research, State University of New York, Buffalo, NY
214. Restrepo-Posada JI, Park R, Buchanan AH (1993) Seismic behaviour of connections between precast concrete elements. Res. Report 93-3, Department of Civil Engineering, University of Canterbury, Christchurch, NZ
215. Rey J, Faccioli E, Bommer JJ (2002) Derivation of design soil coefficients (S) and response spectral shapes for Eurocode 8 using the European Strong-Motion Database. J Seismology 6(4): 547-555
216. Richart FE, Brandtzaeg A, Brown RL (1928) A study of the failure of concrete under combined compressive stresses, Bulletin 185. University of Illinois Engineering Experimental Station, Champaign, IL
217. Rosenblueth E (1951) A basis for aseismic design. Ph.D. Thesis, Department of Civil Engineering, University of Illinois, Urbana, IL
218. th World Conference on Earthquake Engineering, Santiago, Chile, A-1 pp. 185-196
219. Roufaiel MSL, Meyer C (1987) Analytical modeling of hysteretic behaviour of R/C frames. ASCE J Struct Eng 113(ST3): 429-444
220. Rowe RE (1970) Current European views on structural safety. ASCE J Struct Div 96(ST3): 461-467
221. Rutenberg A (1982) Simplified P-Delta analyses for asymmetric structures. ASCE J Struct Div 108(ST9): 1995-2013
222. Rutenberg A, Shtarkaman M, Eisenberger M (1986) Torsional analysis methods for perforated cores, ASCE J Struct Eng 112(6): 1207-1226
223. Saadatmanesh H, Ehsani MR, Li MW (1994) Strength and ductility of concrete columns externally reinforced with fiber composite straps. ACI Struct J 91(4): 434-447
224. Saatcioglou M (1991) Deformability of reinforced concrete columns. In: Ghosh SK (ed) ACI Special Publication SP127, American Concrete Institute, Detroit, MI, pp. 421-452
225. Saiidi M, Sozen MA (1979) Simple and complex models for nonlinear seismic response of R/C structures. Civil Engineering Studies, Structural Research Series No. 465, University of Illinois, Urbana, IL
226. Sakai J, Jeong H, Mahin SA (2006) Reinforced concrete bridge columns that re-center following earthquakes. 8th U.S. National Conference on Earthquake Engineering, San Francisco, CA, paper 1421
227. SEAOC (1995) Performance based seismic engineering of buildings: Vision 2000. Structural Engineers Association of California, Sacramento, CA
228. SEAOC (1999) Recommended lateral force requirements and commentary. Seismology Committee. Structural Engineers Association of California, Sacramento, CA
229. Sfakianakis MG, Fardis MN (1991a) Nonlinear finite element for modeling reinforced concrete columns in three-dimensional analysis. Comput Struct 40(6): 1405-1419
230. Sfakianakis MG, Fardis MN (1991b) RC column model for inelastic seismic response analysis in 3D, ASCE J Eng Mech 117(12): 2770-2787
231. Sheikh SA, Uzumeri SM (1982) Analytical model for concrete confinement in tied columns. ASCE J Struct Eng 108(ST12): 2703-2722
232. Shohara R, Kato B (1981) Ultimate strength of reinforced concrete members under combined loading. IABSE Colloquium - Advanced Mechanics of Reinforced Concrete, Delft, NL, pp. 701-716
233. Skouteropoulou A-M, Bousias SN, Fardis MN (1986) Contribution of curved-in-space freestanding staircases to the lateral stiffness of structures. 8th European Conference on Earthquake Engineering, Lisbon, Vol. 3, 6.6, pp. 41-48
234. Skouteropoulou A-M, Bousias SN, Fardis MN (1987) Stiffness of free-standing stairs with 180° turn. ASCE J Struct Eng 113(12): 2415-2438
235. Smebby W, Der Kiureghian A (1985) Modal combination rules for multicomponent earthquake excitation. Earthquake Eng Struct Dyn 13(1): pp. 1-12
236. Spoelstra MR, Monti G (1999) FRP-confined concrete model. ASCE J Composite Construct 3(3): 143-150
237. Stafford-Smith B, Girgis AM (1986) Deficiencies in the wide column analogy for shear wall core analysis. Concr Int 8(4): 58-61
238. Stanescu D, Plumier A (1993) Types of steel available in Belgium - Statistical data, National Standards. University de Liege contribution to 1st PREC8 Topic 1 annual report, Liege, BE
239. Stoppenhagen DR, Jirsa JO, Wyllie LA (1995). Seismic repair and strengthening of a severely damaged concrete frame. ACI Struct J 92(2): 177-187
240. Stylianidis KC (1985) Experimental investigation of the behaviour of the single-storey infilled RC frames under cyclic quasi-static horizontal loading (parametric analysis). Ph.D. Thesis, Department of Civil Engineering, Aristotle University of Thessaloniki, Thessaloniki, GR
241. Suda K, Murayama Y, Ichinomiya T, Shimbo H (1996) Buckling behavior of longitudinal reinforcing bars in concrete column subjected to reverse lateral loading. 11th World Conference on Earthquake Engineering, Acapulco, paper 1753
242. Tabbara M, Karam G (2007) Modeling the strength of concrete cylinders with FRP wraps using the Hoek-Brown strength criterion. In: Triantafillou TC (ed) 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-8), Patras, GR, paper 6-12
243. Takeda T, Sozen MA, Nielsen NN (1970) R/C response to simulated earthquakes. ASCE J Struct Div 96(ST12): 2557-2573
244. Takiguchi K, Imai K, Mizobuchi T (1997) Compressive strength of concrete around critical section of RC column under compression-bending-shear. AIJ J Struct Construct Eng 496: 83-90
245. Tamužs V, Tepfers R, Valdmanis V, Sparniņš E, Zile E, Ladnova O (2007). Tests and prediction of the mechanical behaviour of cylindrical concrete specimens confined by composite wrapping. In: Triantafillou TC (ed) 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-8), Patras, GR, paper 6-6
246. Tassios TP (1984) Masonry infill and R/C walls under cyclic actions. CIB Symposium on Wall Structures, Warsaw
247. Taucer F, Spacone E, Filippou FC (1991) A fiber beam-column element for seismic response analysis of reinforced concrete structures. Rep. UCB/EERC 91-17, Earthquake Engineering Research Center, University of California, Berkeley, CA
248. Teng JG, Lam L (2004) Behavior and modelling of Fiber Reinforced Polymer-confined concrete. ASCE J Struct Eng 130(11): 1713-1723
249. Thermou GE, Elnashai AS (2006) Seismic retrofit schemes for RC structures and local-global consequences. J Progr Struct Eng Mater 8(1): 1-15
250. Thermou GE, Pantazopoulou SJ, Elnashai AS (2007a) Flexural behavior of brittle RC members rehabilitated with concrete jacketing. ASCE J Struct Eng 133(10): 1373-1384
251. Thermou GE, Pantazopoulou SJ, Elnashai AS (2007b) Design metholodology for seismic upgrading of substandard RC structures. J Earthquake Eng 11(4): 582-606
252. Toutanji HA, Han M, Matthys S (2007) Axial load behaviour of rectangular concrete columns confined with FRP composites. In: Triantafillou TC (ed) 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-8), Patras, GR, paper 6-13
253. Triantafillou TC (1998) Shear strengthening of reinforced concrete beams using epoxy-bonded FRP composites. ACI Struct J 95(2): 107-115
254. Triantafillou TC, Antonopoulos CP (2000) Design of concrete flexural members strengthened in shear with FRP. ASCE J Composite Construct 4(4): 198-205
255. Triantafillou TC, Papanicolaou CG (2006) Shear strengthening of RC members with Textile Reinforced Mortar (TRM) jackets. Mater Struct 39(1): 85-93
256. Triantafillou TC, Papanicolaou CG, Zisimopoulos P, Laourdekis T (2006) Concrete confinement with Textile Reinforced Mortar (TRM) jackets. ACI Struct J 103(1): 28-37
257. Tsiknias T, Pittas M (1992) Strengthening of buildings with shotcrete braces. 1st National Conference on Earthquake Engineering and Engineering Seismology, Athens, GR, Vol. B, pp. 349-362
258. Tso WK (1990) Static eccentricity concept for torsional moment estimations. ASCE J Struct Eng 116(ST5): 1199-1212
259. Vidic T, Fajfar P, Fischinger M (1994) Consistent inelastic design spectra: strength and displacement. Earthquake Eng Struct Dyn 23: 502-521
260. Vintzeleou EN (1984) Mechanisms of load transfer along reinforced concrete interfaces under monotonic and cyclic actions. Doctoral Thesis, Civil Engineering Department, National Technical University, Athens, GR
261. Vintzileou E, Panagiotidou E (2007) An empirical model for predicting the mechanical properties of FRP-confined concrete. In: Triantafillou TC (ed) 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-8), Patras, GR, paper 6-4
262. Viwathanatepa S, Popov E, Bertero VV (1979) Seismic behavior of reinforced concrete beamcolumn subassemblages. Rep. UCB/EERC-79/14, Earthquake Engineering Research Center, University of California, Berkeley, CA
263. Walraven JC (2002) Background document for EN 1992-1-1: Eurocode 2: Design of Concrete Structures - Chapter 6.2: Shear, Delft University of Technology, Delft, NL
264. Wang TY, Bertero VV, Popov EP (1975) Hysteretic behavior of reinforced concrete framed walls. Rep. EERC 75-23, Earthquake Engineering Research Center, University of California, Berkeley, CA
265. Wilson EL, Der Kiureghian A, Bayo EP (1981) A replacement for the SRSS method in seismic analysis. Earthquake Eng Struct Dyn 9: 187-194
266. Xenidis E, Athanatopoulou A, Avramidis IE (1993). Modelling of shear wall cores under earthquake loading using equivalent frames. In: Moan T et al. (ed) Structural Dynamics - EURODYN '93, Balkema, Rotterdam, pp. 901-910
267. Yamamoto Y (1993) Strength and ductility of frames strengthened with steel bracing. In Okada T (ed) Earthquake Resistance of Reinforced Concrete Structures - A Volume Honoring H. Aoyama, Department of Architecture, University of Tokyo, pp. 467-476
268. Yan Z, Pantelides CP (2006) Fiber-Reinforced Polymer jacketed and shape-modified compression members: II - model. ACI Struct J 103(6): 894-903
269. Yan Z, Pantelides CP (2007) Design-oriented model for concrete columns confined with bonded FRP jackets or post-tensioned FRP shells. In: Triantafillou TC (ed) 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-8), Patras, GR, paper 6-1
270. Yettram AL, Husain HM (1966) Plain-framework method for plates in extension. ASCE J Eng Mech Div 92(EM1): 157-168
271. Yoshimura M, Takaine Y, Nakamura T (2004) Collapse drift of R/C columns. In: Kabeyasawa T (ed) Development of Performance-Based Design Methodologies, US-Japan Co-operative Research on Urban Earthquake Disaster Mitigation, Tokyo, pp. 231-242
272. Zaharia R, Taucer F, Pinto A, Molina J, Vidal V, Coelho E, Candeias P (2004) Earthquake testing of a full-scale RC flat slab building structure. European Laboratory for Structural Assessment (ELSA), Institute for the Protection and Security of the Citizen, JRC, Ispra, IT
273. Zarnic R, Tomazevic M (1985) Study of the behaviour of masonry infilled reinforced concrete frames subjected to seismic loading - Part II. Rep. ZRMK/lKPl-85/02, Ljubljana, SI
274. Zeris CA, Mahin SA (1984) Analysis of reinforced concrete beam-columns under uniaxial excitation. ASCE J Struct Eng 114(4): 804-820