Nanostructured electrode materials for electrochemical energy storage and conversion

Wiley Interdisciplinary Reviews: Energy and Environment

Volumn 2, Issue 1, 2013, Pages 14-30

  Shukla, A K ^a   Prem Kumar, T ^b  

^a INDIAN INSTITUTE OF SCIENCE   (India)

^b CENTRAL ELECTROCHEMICAL RESEARCH INSTITUTE   (India)

Author keywords

[No Author keywords available]

Indexed keywords

ELECTRICAL DOUBLE-LAYER CAPACITOR; ELECTROCHEMICAL ENERGY STORAGE; ELECTROCHEMICAL PROCESS; ELECTRONIC AND IONIC CONDUCTIVITY; ENVIRONMENTAL BENIGNITY; HYDROGEN STORAGE MATERIALS; NANOSTRUCTURED ELECTRODE MATERIALS; TRANSITION-METAL OXIDES;

ELECTROCATALYSIS; ELECTROCATALYSTS; ELECTROLYTES; FUEL CELLS; HYDROGEN STORAGE; NANOTECHNOLOGY;

ELECTROLYTIC CAPACITORS;

EID: 84873479559     PISSN: 20418396     EISSN: 2041840X     Source Type: Journal    
DOI: 10.1002/wene.48     Document Type: Article

References (144)

1. Tarascon J-M, Armand M. Issues and challenges facing rechargeable lithium batteries. Nature 2001, 414:359-367.
2. Nazar LF, Goward G, Leroux F, Duncan M, Huang H, Kerr T, Gauicher J. Nanostructured materials for energy storage. Int J Inorg Mater 2001, 3:191-200.
3. Sides CR, Li N, Patrissi CJ, Scrosati B, Martin CR. Nanoscale materials for lithium-ion batteries. MRS Bull 2002, 604-607.
4. Hirshes M. Nanoscale materials for energy storage. Mater Sci Eng B 2004, 108:1-2.
5. Arico AS, Bruce PG, Scrosati B, Tarascon J-M, van Schalkwijk W. Nanostructured materials for advanced energy conversion and storage devices. Nat Mater 2005, 4:366-377.
6. Tarascon J-M, Recham N, Armand M, Chotard J-N, Barpanda P, Walker W, Dupont L. Hunting for better Li-based electrode materials via low temperature inorganic synthesis. Chem. Mater. 2010, 22:724-739.
7. Poizot P, Laruelli S, Grugeon S, Dupont L, Tarascon J-M. Nano-sized transition-metal oxides as negative electrode materials for lithium-ion batteries. Nature 2000, 407:496-499.
8. Tarascon J-M, Grugeon S, Morcrette M, Laruelle S, Rozier P, Poizot P. New concepts for the search of better electrode materials for rechargeable lithium batteries. C. R. Chim 2005, 8:9-15.
9. Winter M, Besenhard JO. Electrochemical lithiation of tin and tin-based intermetallic and composites. Electrochim. Acta 1999, 45:31-50.
10. Rom I, Wachtler M, Papst I, Schmied M, Besenhard JO, Hofer F, Winter M. Electron microscopical characterization of Sn/SnSb composite electrodes for lithium-ion batteries. Solid State Ionics, 2001, 143:329-336.
11. 3Sb. J. Power Sources 2003, 119:64-68.
12. Mukaibo H, Sumi T, Yokoshima T, Momma T, Osaka T. Electrodeposited Sn-Ni alloy film as a high capacity anode material for lithium-ion secondary batteries. Electrochem. Solid-State Lett. 2003, 6:A218-A220.
13. Hassoun J, Panero S, Scrosati B. Electrodeposited Ni-Sn intermetallic electrodes for advanced lithium ion batteries. J. Power Sources 2006, 160:1336-1341.
14. Hassoun J, Panero S, Simon P, Taberna P, Scrosati B. High-rate, long-life Ni-Sn nanostructured electrodes for lithium-ion batteries. Adv. Mater. 2007, 19:1632-1635.
15. x-C (M=Al, Ti, or Mo) nanocomposite anodes for lithium-ion batteries. Chem. Mater. 2009, 21:3898-3904.
16. Morishita T, Hirabayashi T, Okuni T, Ota N, Inagaki M. Preparation of carbon-coated Sn powders and their loading onto graphite flakes for lithium ion secondary battery. J. Power Sources 2006, 160:638-644.
17. Noh MJ, Kwon YJ, Lee HJ, Cho J, Kim YJ, Kim MG. Amorphous carbon-coated tin anode material for lithium secondary battery. Chem. Mater. 2005, 17:1926-1929.
18. Terrones M. Synthesis, properties and applications of carbon nanotubes. Annu. Rev. Mater. Res. 2003, 33:419-501.
19. Prem Kumar T, Ramesh R, Lin YY, Fey GTK. Tin-filled carbon nanotubes as insertion anode materials for lithium-ion batteries. Electrochem. Commun. 2004, 6:520-525.
20. 0:5 as Li-ion battery anodes. Carbon 2003, 41:959-966.
21. Zheng JW, Nai SML, Ng MF, Wu P, Wei J, Gupta M. DFT study on nano structures of Sn/CNT complex for potential Li-ion battery application. J. Phys. Chem. 2009, C113:14015-14019.
22. Shukla AK, Prem Kumar T. Materials for next generation batteries. Curr. Sci. 2008, 94:314-331.
23. Prem Kumar T, Sri Devi Kumari T, Stephan AM. Carbonaceous anode materials for lithium-ion batteries-the road ahead. J. Ind. Inst. Sci. 2009, 89:393-424.
24. Wang GX, Ahn JH, Yao J, Bewlay S, Liu HK. Nanostructured Si-C composite anodes for lithium-ion batteries. Electrochem. Commun. 2004, 6:689-692.
25. Chan CK, Peng H, Liu G, McIlwrath K, Zhang XF, Huggins RA, Cui Y. High performance lithium battery anodes using silicon nanowires. Nat Nanotechnol. 2008, 3:31-35.
26. Park M-H, Kim MG, Joo J, Kim K, Kim J, Ahn S, Cui Y, Cho J. Silicon nanotube battery anodes. Nano Lett. 2009, 9:3844-3847.
27. Ma H, Cheng F, Chen J, Zhao J, Li C, Tao Z, Liang J. Nest-like silicon nanospheres for high-capacity lithium storage. Adv. Mater. 2007, 19:4067-4070.
28. Kim H, Cho J. Superior lithium electroactive mesoporous Si at carbon core-shell nanowires for lithium battery anode material. Nano Lett. 2008, 8:3688-3691.
29. Kim H, Han B, Choo J, Cho J. Three-dimensional porous silicon particles for use in high-performance lithium secondary batteries. Angew. Chem., Int. Ed. 2008, 47:10151-10154.
30. Park M-H, Kim MG, Joo J, Kim K, Kim J, Ahn S, Cui Y, Cho J. Silicon nanotube battery anodes. Nano Lett. 2009, 9:3844-3847.
31. Poizot P, Laruelli S, Grugeon S, Dupont L, Tarascon J-M. Nano-sized transition-metal oxides as negative electrode materials for lithium-ion batteries. Nature 2000, 407:496-499.
32. Gireaud L, Grugeon S, Pilard S, Guenot P, Tarascon J-M, Laruelle S. Mass spectrometry investigations on electrolyte degradation products for the development of nanocomposite electrodes in lithium ion batteries. Anal. Chem. 2006, 78:3688-3698.
33. Lupo F, Kamalakaran R, Gulino A. Viable route for cobalt oxide-carbon nanocomposites. J. Phys. Chem. C 2009, 113:15533-15537.
34. Wang G, Shen XP, Yao J, Wexler D, Ahn JH. Hydrothermal synthesis of carbon nanotube/cobalt oxide core-shell one-dimensional nanocomposite and application as an anode material for lithium-ion batteries. Electrochem. Commun. 2009, 11:546-549.
35. Sinha NK, Munichandraiah N. The effect of particle size on performance of cathode materials of Li-ion batteries. J. Ind. Inst. Sci. 2009, 89:381-392.
36. 2 intercalation electrodes: influence of ion exchange on capacity and structure upon cycling. Chem. Mater. 2001, 13:2380-2386.
37. Ravet A, Chouinard J, Besner S, Gautier M, Armand M. Electroactivity of natural and synthetic triphylite. J. Power Sources 2001, 97-98:503-507.
38. 4 in prismatic lithium-ion cells. J. Electrochem. Soc. 2005, 152:A899-A904.
39. Quartarone E, Mustarelli P, Magistris A. PEO-based composite polymer electrolytes. Solid State Ionics 1998, 110:1-14.
40. Croce F, Curini R, Martinello A, Perci L, Ronci F, Scrosati B, Caminiti R. Physical and chemical properties of nanocomposite polymer electrolytes. J. Phys. Chem. 1999, 103:10632-10638.
41. Angell CA, Liu C, Sanchez S. Rubbery solid electrolytes with dominant cationic transport and high ambient conductivity. Nature 1993, 362:137-139.
42. MacFarlane DR, Newman PL, Nairn KM, Forsyth M. Lithium-ion conducting ceramic/polyether composites. Electrochim. Acta 1998, 43:1333-1337.
43. Kumar B, Rodrigues SJ, Scanlon L. Ionic conductivity of polymer-ceramic composites. J. Electrochem. Soc. 2001, 148:A1191-1195.
44. Maier J. Ionic conduction in space charge regions. Prog. Solid State Chem. 1995, 23:171-263.
45. Appetecchi GB, Croce F, Persi L, Ronci F, Scrosati B. Transport and interfacial properties of composite polymer electrolytes. Electrochim. Acta 2000, 45:1481-1490.
46. Manuel Stephan A, Prem Kumar T, Sabu Thomas P, Selvin Thomas, Bongiovanni R, Nair JR, Angulakshmi N. Calcium phosphate incorporated poly(ethylene oxide)-based nanocomposite electrolytes for lithium batteries. I. Ionic conductivity and positron annihilation lifetime spectroscopy studies. J. Appl. Polym. Sci, doi:10.1002/app.35219. In press.
47. 2 polymer electrolytes. Electrochim. Acta 2010, 55:1401-1406.
48. 6. Nature 1999, 398:792-794.
49. Gadjourova Z, Andreev YG, Tunstall DP, Bruce PG. Ionic conductivity in crystalline polymer electrolytes. Nature 2001, 412:520-523.
50. Wang G, Zhang L, Zhang J. A review of electrode materials for electrochemical supercapacitors. Chem Soc. Rev, doi: 10.1039/C1CS15060J. In press.
51. Ravikumar MK, Niranjana E, Sundar Rajan A, Banerjee A, Gaffoor SA, Shukla AK. J. Indian Inst. Sci. 2009, 89:455-463.
52. Beguin F, Frackowiak E, eds. Carbon materials for Electrochemical Energy Storage Systems. Boca Raton, FL: CRC Press/Taylor & Francis; 2010.
53. Burke AF. Ultracapacitors: why, how, and where is the technology? J. Power Sources 2000, 91:37-50.
54. Kotz R, Carlen M. Principles and applications of electrochemical capacitors. Electrochim. Acta 2000, 45:2483-2498.
55. Chu A, Braatz P. Comparison of commercial supercapacitors and high-power lithium-ion batteries for power-assist applications in hybrid electric vehicles. I. Initial characterization. J. Power Sources 2002, 112:236-246.
56. Zheng JP, Huang J, Jow TR. The limitations of energy density for electrochemical capacitors. J. Electrochem. Soc. 1997, 144:2026-2031.
57. Lipka SM, Reisner DE, Dai J, Cepulis R. Asymmetric-type electrochemical supercapacitor development under the ATP-an update. In: Proceedings of the 11th International Seminar on Double Layer Capacitors, Florida Atlantic University. Deerfield Beach, FL; December 2001.
58. Du Pasquier A, Shelburne JA, Plitz I, Badway F, Gozdz AS, Amatucci GG. The non-aqueous asymetric hybrid technology: materials, electrochemical properties and performance in plastic cells (Telcordia). In: Proceedings of 11th International Seminar on Double Layer Capacitors, Florida Atlantic University. Deerfield Beach, FL; December 2001.
59. Choi D, Blomgren GE, Kumta PN. Fast and reversible surface redox reaction in nanocrystalline vanadium nitride supercapacitors. Adv. Mater. 2006, 18:1178-1182.
60. Burke AF, Miller M, Kershaw T. Feasibility studies for the development of hybrid carbon/lead oxide electrochemical capacitors: analysis, assembly, and test of devices. UC Davis Report No. UCD-ITS-03-02, June 2003.
61. 4/C electrochemical capacitor. In: 203rd Meeting of the Electrochemical Society. Paris; 2003.
62. Naoi K, Simon P. New materials and new configurations for advanced electrochemical capacitors. Interface 2008, 17:34-37.
63. 2 electrode used in aqueous electrochemical capacitor. Chem. Mater. 2004, 16:3184-3190.
64. 2 within ultraporous carbon structures via self-limiting electroless deposition: implications for electrochemical capacitors. Nano Lett. 2007, 7:281-286.
65. Kazaryan SA, Razumov SN, Litvinenko SV, Kharisov GG, Kogan VI. Mathematical model of heterogeneous electrochemical capacitors and calculation of their parameter. J. Electrochem. Soc. 2006, 153:A1655-A1671.
66. Kazaryan S. Characterstics of the PbO2(H2SO4)C ECs by universal supercapacitors LLC. In: Proceedings of Advanced Capacitor World Summit 2007. San Diego, CA; July 2007.
67. Woolf J. Theory into practice (Axion Power) BEST, Autumn 2006, ISSN 1741-8666.
68. Banerjee A, Ravikumar MK, Jalajakshi P, Suresh Kumar A, Gaffoor SA, Shukla AK. Substrate-integrated lead-carbon hybrid ultracapacitor with flooded, adsorbent-glass-mat and gelled electrolyte configurations. J. Chem. Sci. In press.
69. Roberts ME, Wheeler DR, McKenzie BB, Bunker BC. High specific capacitance conducting polymer supercapacitor electrodes based on poly(tris(thiophenylphenyl)amine). J. Mater. Chem. 2009, 19:6977-6979.
70. Wang YG, Li HQ, Xia YY. Ordered whisker-like polyaniline grown on the surface of mesoporous carbon and its electrochemical capacitance performance. Adv. Mater. 2006, 18:2619-2623.
71. Zhang H, Cao G, Wang Z, Yang Y, Shi Z, Gu Z. Tube-covering-tube nanostructured polyaniline/carbon nanotube array composite electrode with high capacitance and superior rate performance as well as good cycling stability. Electrochem. Commun. 2008, 10:1056-1059.
72. 2 for next generation supercapacitor. Nano Lett. 2006, 6:2690-2695.
73. Sugimoto W, Yokoshima K, Murakami Y, Takasu Y. Charge storage mechanism of nanostructured anhydrous and hydrous ruthenium-based oxides. Electrochim. Acta 2006, 52:1742-1748.
74. 2 nanowires prepared by a hydrothermal synthesis method. Adv. Mater. Res. 2010, 152-153:1551-1554.
75. Liu J, Essner J, Li J. Hybrid supercapacitor based on coaxially coated manganese oxide on vertically aligned carbon nanofiber arrays. Chem. Mater. 2010, 22:5022-5030.
76. 2/vertically aligned carbon nanotube composite for supercapacitor application. J. Power Sources 2011, 196:5779-5783.
77. Srinivasan S, Mosdale R, Stevens P, Yang C. Fuel cells: reaching the era of clean and efficient power generation in the twenty-first century. Annu. Rev. Energy Environ. 1999, 24:281-238.
78. Mukerjee S, Srinivasan S, Soriaga MP, McBreen J. Role of structural and electronic properties of Pt and Pt alloys on electrocatalysis of oxygen reduction. An in-situ XANES and EXAFS investigation. J. Electrochem. Soc. 1995, 142:1409-1422.
79. Aricò AS, Srinivasan S, Antonucci V. DMFCs: from fundamental aspects to technology development. Fuel Cells 2001, 1:133-161.
80. Freund A, Lang J, Lehman T, Starz KA. Improved Pt alloy catalysts for fuel cells. Catal. Today 1996, 27:279-283.
81. 2 electrooxidation: stripping voltammetry and rotating-disk measurements. Langmuir 1997, 14:2591-2595.
82. Scibioh MA, Rajesh B, Viswanathan B. Anodes for direct methanol fuel cells. Proc. Ind. Natl Sci. Acad. 2002, 68A:99-139.
83. Demirci UB. Theoretical means for searching bimetallic alloys as anode electrocatalysts for direct liquid-feed fuel cells. J. Power Sources 2007, 173:11-18.
84. Scott K, Shukla AK. Direct methanol fuel cells: fundamentals, problems and perspectives. In: White RE, Vayenas CG, Gamboa-Aldeco ME, eds. Modern Aspects of Electrochemistry. Vol. 40. Springer; 2007, 127-227.
85. Leger JM, Rousseau S, Coutanceau C, Hahn F, Lamy C. How bimetallic electrocatalysts does work for reactions involved in fuel cells? Example of ethanol oxidation and comparison to methanol. Electrochim. Acta 2005, 50:5118-5125.
86. Lamy C, Rousseau S, Belgsir EM, Coutanceau C, Leger JM. Recent progress in the direct ethanol fuel cell: development of new platinum-tin electrocatalysts. Electrochim. Acta 2004, 49:3901-3908.
87. Jiang L, Sun G, Sun S, Liu J, Tang S, Li H, Zhou B, Xin Q. Structure and chemical composition of supported Pt-Sn electrocatalysts for ethanol oxidation. Electrochim. Acta 2005, 50:5384-5389.
88. Song SQ, Zhou WJ, Zhou ZH, Jiang LH, Sun GQ, Xin Q, Leontidis V, Kontou S, Tsiakaras P. Direct ethanol PEM fuel cells: the case of platinum based anodes. Int. J. Hydrogen Energy 2005, 30:995-1001.
89. Selvaganesh SV, Selvarani G, Sridhar P, Pitchumani S, Shukla AK. Durable electrocatalytic-activity of Pt-Au/C cathode in PEMFCs. Phys. Chem. Chem. Phys. 2011, 13:12623-12634.
90. Chrzanowski W, Wieckowski A. Enhancement in methanol oxidation by spontaneously deposited ruthenium on low-index platinum-electrodes. Catal. Lett. 1998, 50:69-75.
91. Brankovic SR, Wang JX, Adzic RR. Pt submonolayers on Ru nanoparticles-a novel low Pt loading, high CO tolerance fuel-cell electrocatalyst. Electrochem. Solid-State Lett. 2001, 4:A217-A220.
92. Atanasoski R. Recent advances on the 3M MEA technology for PEMFs. In: Proceedings of the 4th International Conference on Applications of Conducting Polymers, ICCP-4. Como, Italy; 2004, 18-20.
93. Sun GR, Wang JT, Savinell RF. Iron(III) tetramethoxyphenylporphyrin (Fetmpp) as methanol tolerant electrocatalyst for oxygen reduction in direct methanol fuel-cells. J. Appl. Electrochem. 1998, 28:1087-1093.
94. Reeve RW, Christensen PA, Hamnett A, Haydock SA, Roy SC. Methanol tolerant oxygen reduction catalysts based on transition metal sulfides. J. Electrochem. Soc. 1998, 145:3463-3471.
95. Zhang S, Yuan X, Hin JNC, Wang H, Friedrich KA, Schulze M. A review of platinum-based catalyst layer degradation in proton exchange membrane fuel cells. J. Power Sources 2009, 194:588-600.
96. Yuan H, Guo D, Qiu X, Zhu W, Chen L. Influence of metal oxides on Pt catalysts for methanol electrooxidation using electrochemical impedance spectroscopy. J. Power Sources 2009, 188:8-13.
97. 2 nanoparticles in polymer electrolyte fuel cell. J. Electrochem. Soc. 2009, 156:B32-B37.
98. 5/C catalysts. Catal. Today 2009, 141:138-143.
99. Wang Q, Wei A, Zhao X, Zhang S. Novel metal oxide support with water activation ability for use in direct methanol fuel cells. Chin J. Chem. 2009, 27:1649-1656.
100. Liu Y, Ishihara A, Mitsushima S, Kamiya N, Ota K. Transition metal oxides as DMFC cathodes without platinum. J. Electrochem. Soc. 2007, 154:B664-B669.
101. Serov A, Kwak C. Review of non-platinum anode catalysts for DMFC and PEMFC application. Appl. Catal. B: Environment 2009, 90:313-320.
102. Prakash S, Narayanan SR, Atti A, Olah G, Smart MC. Membrane electrode assembly for a fuel cell. US Patent 0, 207, 167, 2003, to Fish & Richardson, Pc.
103. Liang ZX, Zhao TS, Prabhuram J. A glue method for fabricating membrane electrode assemblies for direct methanol fuel cells. Electrochim. Acta 2006, 51:6412-6418.
104. Shiraishi S, Kurihara H, Shi L, Nakayama T, Oya A. Electric double-layer capacitance of meso/macroporous activated carbon fibers prepared by the blending method. J. Electrochem. Soc. 2002, 149:A855-A861.
105. Yamaguchi T, Miyata F, Nakao S. Pore-filling type polymer electrolyte membranes for a direct methanol fuel cell. J. Membr. Sci. 2003, 214:283-292.
106. Zhou J, Childs RF, Mika AM. Pore-filled nanofiltration membranes based on poly(2-acrylamido-2-methylpropanesulfonic acid) gels. J. Membr. Sci. 2005, 254:89-99.
107. Kerres J, Ullrich A, Meier F, Haring T. Synthesis and characterization of novel acid-base polymer blends for application in membrane fuel cells. Solid State Ionics 1999, 125:243-249.
108. Alberti G, Casciola M. Composite membranes for medium-temperature PEM fuel cells. Annu. Rev. Mater. Res. 2003, 33:129-154.
109. Aricò AS, Creti P, Antonucci PL, Antonucci V. Comparison of ethanol and methanol oxidation in a liquid feed solid polymer electrolyte fuel cells at high temperature. Electrochem. Solid-State Lett. 1998, 1:66-68.
110. Aricò AS, Baglio V, Di Blasi A, Antonucci V. FTIR spectroscopic investigation of inorganic fillers for composite DMFC membranes. Electrochem. Commun. 2003, 5:862-866.
111. Knauth P, Tuller H. Solid-state ionics: roots, status, and future prospects. J. Am. Ceram. Soc. 2002, 85:1654-1680.
112. Ferreira PJ, la O' GJ, Shao-Horn Y, Morgan D, Makharia R, Kocha S, Gasteiger HA. Instability of Pt/C electrocatalysts in proton exchange membrane fuel cells. J. Electrochem. Soc. 2005, 152:A2256-A2271.
113. Guilminot E, Corcella A, Iojoiu C, Berthomé G, Maillard F, Chatenet M, Sanchez JY. Membrane and active layer degradation upon PEMFC steady-state operation. J. Electrochem. Soc. 2007, 154:B1106-B1114.
114. Iojoiu C, Guilminot E, Maillard F, Chatenet M, Sanchez JY, Claude E, Rossinot E. Membrane and active layer degradation following PEMFC steady-state operation. J. Electrochem. Soc. 2007, 154:B1115-B1120.
115. Toda T, Igarashi H, Uchida H, Watanabe M. Enhancement of the electroreduction of oxygen on Pt alloys with Fe, Ni and Co. J. Electrochem. Soc. 1999, 146:3750-3756.
116. Stamenković VR, Mun BS, Mayrhofer KJJ, Ross PN, Marković NM. Effect of surface composition on electronic structure, stability, and electrocatalytic properties of Pt-transition metal alloys: Pt-skin versus Pt-skeleton surfaces. J. Am. Chem. Soc. 2006, 128:8813-8819.
117. Stamenković VR, Mun BS, Arenz M, Mayrhofer KJJ, Lucas CA, Wang GF, Ross PN, Marković NM. Trends in electrocatalysis on extended and nanoscale Pt-bimetallic alloy surfaces. Nat Mater. 2007, 6:241-247.
118. 3Co' nanoparticles: direct evidence of percolated and sandwich-segregation structures. J. Am. Chem. Soc. 2008, 130:13818-13819.
119. 3Co/C cathodes in a 16 cell PEMFC stack: macro/microstructural changes and degradation mechanisms. J. Electrochem. Soc. 2010, 157:B1887-B1895.
120. Zhou YP, Feng K, Sun Y, Zhou L. A brief review on the study of hydrogen storage in terms of carbon nanotubes. Prog. Chem. 2003, 15:345-350.
121. Schlappach L, Zuttel A. Hydrogen-storage materials for mobile applications. Nature 2001, 414:353-358.
122. Ma RZ, Bando Y, Sato T, Goldberg D, Zhu HW, Xu CL, Wu DH. Synthesis of boron-nitride nanofibers and measurement of their hydrogen uptake capacity. Appl. Phys. Lett. 2002, 81:5225-5227.
123. Karkamkar A, Aardahl C, Autrey T. Recent developments on hydrogen release from ammonia borane. Mater. Matters 2007, 2:6-10.
124. 2-M systems (M-Al, Ti, Fe, Ni, Cu, and Nb) for hydrogen storage. Int. J. Hydrogen Energy 2004, 29:73-80.
125. 2Ni-10 wt.% V. J. Alloys Compd. 2003, 356:593-597.
126. Hirscher M, Becher M. Hydrogen storage in carbon nanotubes. J. Nanosci. Nanotechnol. 2003, 3:3-17.
127. 3 to magnesium for improvement of the hydrogen sorption properties. J. Alloys Compd. 2003 351, 217-221.
128. Wolf G, Baumann J, Baitalowa F, Hoffmann FP. Calorimetric process monitoring of thermal decomposition of B ± N ± H compounds. Thermochim. Acta 2000, 343:19-25.
129. Gutowska A, Li L, Shin Y, Wang CM, Li XS, Linehan JC, Smith RS, Kay BD, Schmid B, Shaw W, Gutowski M, Autrey T. Nanoscaffold mediates hydrogen release and the reactivity of ammonia boran. Angew. Chem. Int. Ed. 2005, 44:3578-3582.
130. Zuttel A. Materials for hydrogen storage. Mater. Today 2003, 6:24-33.
131. Hirscher M, Becher M. Hydrogen storage in carbon nanotubes. J. Nanosci. Nanotechnol. 2003, 3:3-17.
132. Froudakis GE. Why alkali-metal-doped carbon nanotubes possess high hydrogen uptake. Nano Lett. 2001, 1:531-533.
133. 2 uptake by alkali-doped carbon nanotubes under ambient pressure and moderate temperatures. Science 1999, 285:91-93.
134. Lee EC, Kim YS, Jin YG, Chang K. First-principles study of hydrogen absorption on carbon nanotube surfaces. Phys. Rev. B 2002, 66:073415-1-073415-4.
135. Kowalczyk P, Holyst R, Terrones M, Terrones H. Hydrogen storage in nanoporous carbon materials: myth and facts. Phys. Chem. Chem. Phys. 2007, 9:1786-1792.
136. Jorda-Beneyto M, Suarez-Garcia F, Lozano-Castello D, Cazorla-Amoros D, Linares-Solano A. Hydrogen storage on chemically activated carbons and carbon nanomaterials at high pressure. Carbon 2007, 45:293-303.
137. Dimitrakakis GK, Tylianakis E, Froudakis GE. Pillared graphene: a new 3-D network structure for enhanced hydrogen storage. Nano Lett. 2008, 8:3166-3170.
138. Lee H, Ihm J, Cohen ML, Louie SG. Calcium-decorated graphene-based nanostructures for hydrogen storage. Nano Lett. 2010, 10:793-798.
139. Roswell JLC, Millward AR, Park KS, Yaghi OM. Hydrogen sorption in functionalized metal-organic frameworks. J. Am. Chem. Soc. 2004, 126:5666-5667.
140. Ma S, Sun D, Ambrogio MW, Fillinger JA, Parkin S, Zhou HC. Framework-catenation isomerism in MOFs and its impact on hydrogen uptake. J. Am. Chem. Soc. 2007, 129:1858-1859.
141. 2 saturation uptake in microporous metal-organic frameworks. J. Am. Chem. Soc. 2006, 128:3494-3495.
142. Collins DJ, Zhou HC. Hydrogen storage in metal-organic frameworks. J. Mater. Chem. 2007, 17:3154-3160.
143. Dinca M, Yu AF, Long JR. Microporous metal-organic frameworks incorporating 1, 4-benzeneditetrazolate: syntheses, structures, and hydrogen storage properties. J. Am. Chem. Soc. 2006, 128:8904-8913.
144. Luo J, Xu H, Liu Y, Zhao Y, Daemen LL, Brown C, Timofeeva TV, Ma S, Zhou HC. Hydrogen adsorption in a highly stable porous rare-earth metal-organic frame-work: sorption properties and neutron diffraction studies. J. Am. Chem. Soc. 2008, 130:9626-9627.