Bonding effectiveness of self-adhesive composites to dentin and enamel

Dental Materials

Volumn 29, Issue 2, 2013, Pages 221-230

  Poitevin, André ^a   De Munck, Jan ^a   Van Ende, Annelies ^a   Suyama, Yuji ^a,b   Mine, Atsushi ^a,c   Peumans, Marleen ^a,d   Van Meerbeek, Bart ^a,d  

^a UNIVERSITY OF LEUVEN   (Belgium)

^b TORANOMON HOSPITAL   (Japan)

^c OKAYAMA UNIVERSITY   (Japan)

^d UNIVERSITY HOSPITALS LEUVEN   (Belgium)

Author keywords

Composite; Dentin; Enamel; Micro tensile bond strength; Self adhesive; Smear layer

Indexed keywords

BONDING EFFECTIVENESS; CLINICAL APPLICATION; DENTIN; FLOWABLE COMPOSITE; MICRO-TENSILE BOND STRENGTH; ONE-STEP SELF-ETCH ADHESIVE; PRE-ETCHING; SELF-ADHESIVE; SMEAR LAYERS;

BOND STRENGTH (MATERIALS); COMPOSITE MATERIALS; ETCHING; LIQUIDS; PHOSPHORIC ACID; SILICON CARBIDE; TENSILE STRENGTH;

ENAMELS;

RESIN; RESIN CEMENT;

ANALYSIS OF VARIANCE; CHEMISTRY; DENTAL ACID ETCHING; DENTAL BONDING; DENTAL SURGERY; DENTIN; DEVICE FAILURE ANALYSIS; ENAMEL; HUMAN; MATERIALS TESTING; PROCEDURES; SCANNING ELECTRON MICROSCOPY; TENSILE STRENGTH; ARTICLE; EQUIPMENT FAILURE; METHODOLOGY;

ACID ETCHING, DENTAL; ANALYSIS OF VARIANCE; COMPOSITE RESINS; DENTAL BONDING; DENTAL ENAMEL; DENTIN; EQUIPMENT FAILURE ANALYSIS; HUMANS; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; RESIN CEMENTS; SMEAR LAYER; TENSILE STRENGTH;

EID: 84872811142     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2012.10.001     Document Type: Conference Paper

References (38)

1. B. Van Meerbeek, J. De Munck, Y. Yoshida, S. Inoue, M. Vargas, and P. Vijay Buonoccore memorial lecture: adhesion to enamel and dentin: current status and future challenges Operative Dentistry 28 2003 215 235 (Pubitemid 37237447)
2. B. Van Meerbeek, K. Van Landuyt, J. De Munck, M. Hashimoto, M. Peumans, and P. Lambrechts Technique-sensitivity of contemporary adhesives Dental Materials Journal 24 2005 1 13 (Pubitemid 40978968)
3. D. Spreafico, S. Semeraro, D. Mezzanzanica, D. Re, M. Gagliani, and T. Tanaka The effect of the air-blowing step on the technique sensitivity of four different adhesive systems Journal of Dentistry 34 2006 237 244 (Pubitemid 43199804)
4. P. Magne, R. Mahallati, P. Bazos, and W.S. So Direct dentin bonding technique sensitivity when using air/suction drying steps Journal of Esthetic and Restorative Dentistry 20 2008 130 138
5. K. Van Landuyt, A. Mine, J. De Munck, E. Coutinho, M. Peumans, and S. Jaecques Technique sensitivity of water-free one-step adhesives Dental Materials 24 2008 1258 1267
6. B. Van Meerbeek, M. Peumans, A. Poitevin, A. Mine, A. Van Ende, and J. De Munck Relationship between bond-strength tests and clinical outcomes Dental Materials 26 2010 e100 e121
7. B. Van Meerbeek, K. Yoshihara, Y. Yoshida, A. Mine, J. De Munck, and K. Van Landuyt State of the art of self-etch adhesives Dental Materials 27 2011 17 28
8. J. De Munck, M. Vargas, K. Van Landuyt, K. Hikita, P. Lambrechts, and B. Van Meerbeek Bonding of an auto-adhesive luting material to enamel and dentin Dental Materials 20 2004 963 971 (Pubitemid 40146126)
9. C. Goracci, A.H. Cury, A. Cantoro, F. Papacchini, F. Tay, and M. Ferrari Microtensile bond strength and interfacial properties of self-etching and self-adhesive resin cements used to lute composite onlays under different seating forces Journal of Adhesive Dentistry 8 2006 327 335 (Pubitemid 44643523)
10. B. Yang, K. Ludwig, R. Adelung, and M. Kern Micro-tensile bond strength of three luting resins to human regional dentin Dental Materials 22 2006 45 56 (Pubitemid 41808725)
11. I. Radovic, F. Monticelli, C. Goracci, Z.R. Vulicevic, and M. Ferrari Self-adhesive resin cements: a literature review Journal of Adhesive Dentistry 10 2008 251 258
12. D. Barcellos, G. Batista, M. Silva, P. Rangel, C. Torres, and M. Fava Evaluation of bond strength of self-adhesive cements to dentin with or without application of adhesive systems Journal of Adhesive Dentistry 13 2011 261 265
13. M. Salerno, G. Derchi, S. Thorat, L. Ceseracciu, R. Ruffilli, and A.C. Barone Surface morphology and mechanical properties of new generation flowable resin composites for dental restoration Dental Materials 27 2011 1221 1228
14. Y. Wei, N. Silikas, Z. Zhang, and D. Watts Diffusion and concurrent solubility of self-adhering and new resin-matrix composites during water sorption/desorption cycles Dental Materials 27 2011 197 205
15. Y. Wei, N. Silikas, Z. Zhang, and D. Watts Hygroscopic dimensional changes of self-adhering and new resin-matrix composites during water sorption/desorption cycles Dental Materials 27 2011 259 266
16. O. Ozel Bektas, D. Eren, E.G. Akin, and H. Akin Evaluation of a new self-adhering flowable composite in terms of micro-shear bond strength and microleakage Acta Odontologica Scandinavica 2012 [Epub ahead of print]
17. C. Rengo, C. Goracci, J. Juloski, N. Chieffi, A. Giovannetti, and A. Vichi Influence of phosphoric acid etching on microleakage of a self-etch adhesive and a self-adhering composite Australian Dental Journal 57 2012 220 226
18. A.R. Yazici, I. Agarwal, M. Campillo-Funollet, C. Munoz-Viveros, S.A. Antonson, and D.E. Antonson Effect of laser preparation on bond strength of a self-adhesive flowable resin Lasers in Medical Science 2012 [Epub ahead of print]
19. L. Giachetti, D. Scaminaci Russo, M. Baldini, F. Bertini, L. Steier, and M. Ferrari Push-out strength of translucent fibre posts cemented using a dual-curing technique or a light-curing self-adhering material International Endodontic Journal 45 2012 249 256
20. C. Goracci, M. Margvelashvili, A. Giovannetti, A. Vichi, and M. Ferrari Shear bond strength of orthodontic brackets bonded with a new self-adhering flowable resin composite Clinical Oral Investigations 2012 [Epub ahead of print]
21. A. Poitevin, J. De Munck, K. Van Landuyt, E. Coutinho, M. Peumans, and P. Lambrechts Critical analysis of the influence of different parameters on the micro-tensile bond strength of adhesives to dentin Journal of Adhesive Dentistry 10 2008 7 16
22. J. Perdigão, L. Lopes, P. Lambrechts, J. Leitao, B. Van Meerbeek, and G. Vanherle Effects of a self-etching primer on enamel shear bond strength and SEM morphology American Journal of Dentistry 10 1997 141 146 (Pubitemid 127499523)
23. J. De Munck, A. Mine, A. Poitevin, A. Van Ende, M. Vivan Cardoso, and K. Van Landuyt Meta-analytical review of parameters involved in dentin bonding Journal of Dental Research 91 2012 351 357
24. Y. Yoshida, K. Nagakane, R. Fukuda, Y. Nakayama, M. Okazaki, and H. Shintani Comparative study on adhesive performance of functional monomers Journal of Dental Research 83 2004 454 458 (Pubitemid 41756839)
25. Y. Yoshida, B. Van Meerbeek, Y. Nakayama, M. Yoshioka, J. Snauwaert, and Y. Abe Adhesion to and decalcification of hydroxyapatite by carboxylic acids Journal of Dental Research 80 2001 1565 1569
26. M. Yoshioka, Y. Yoshida, S. Inoue, P. Lambrechts, G. Van Herle, and Y. Nomura Adhesion/decalcification mechanism of acid interactions with human hard tissues Journal of Biomedical Materials Research 59 2001 56 62
27. A. Mine, A. Poitevin, M. Peumans, J. Sabbagh, J. De Munck, and Y. Yoshida TEM interfacial characterization of an adhesive-free composite bonded to enamel/dentin Journal of Dental Research 88 Special Issue A 2009 [abstract #2961]
28. M. Hanabusa, A. Mine, T. Kuboki, Y. Momoi, K. Van Landuyt, and B. Van Meerbeek TEM interfacial characterization of an experimental self-adhesive filling material bonded to enamel/dentin Dental Materials 27 2011 818 824
29. A. Mine, J. De Munck, M.V. Cardoso, K. Van Landuyt, A. Poitevin, and T. Kuboki Bonding effectiveness of two contemporary self-etch adhesives to enamel and dentin Journal of Dentistry 37 2009 872 883
30. Y. Li, M. Swartz, R. Phillips, B. Moore, and T. Roberts Effect of filler content and size on properties of composites Journal of Dental Research 64 1985 1396 1401
31. A. Razak, and A. Harrison The effect of filler content and processing variables on dimensional accuracy of experimental composite inlay material Journal of Prosthetic Dentistry 77 1997 353 358
32. J. Ferracane, H. Berge, and J. Condon In vitro aging of dental composites in water-effect of degree of conversion, filler volume, and filler/matrix coupling Journal of Biomedical Materials Research 42 1998 465 472 (Pubitemid 28452524)
33. B. Lim, J. Ferracane, J. Condon, and J. Adey Effect of filler fraction and filler surface treatment on wear of microfilled composites Dental Materials 18 2002 1 11 (Pubitemid 40072296)
34. S. Heintze, U. Blunck, T. Göhring, and V. Rousson Marginal adaptation in vitro and clinical outcome of Class V restorations Dental Materials 25 2009 605 620
35. A. Vichi, C. Gorraci, and M. Ferrari Clinical study of the self-adhering flowable composite resin Vertise Flow in Class I restorations: six-month follow-up International Dentistry SA 12 2011 14 23
36. R. Hickel, J. Roulet, S. Bayne, S. Heintze, I. Mjör, and M. Peters Recommendations for conducting controlled clinical studies of dental restorative materials The Journal of Adhesive Dentistry 9 2007 121 147
37. M. Peumans, P. Kanumilli, J. De Munck, K. Van Landuyt, P. Lambrechts, and B. Van Meerbeek Clinical effectiveness of contemporary adhesives: a systematic review of current clinical trials Dental Materials 21 2005 864 881 (Pubitemid 41108347)
38. M. Peumans, J. De Munck, K. Van Landuyt, A. Poitevin, P. Lambrechts, and B. Van Meerbeek Eight-year clinical evaluation of a 2-step self-etch adhesive with and without selective enamel etching Dental Materials 26 2010 1176 1184