Integrated computational materials science and engineering of textile polymer composites

Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference

Volumn , Issue , 2011, Pages

  Heinrich, Christian ^a   Aldridge, Michael ^a   Wineman, Alan S ^a   Kieffer, John ^a   Waas, Anthony M ^a  

^a UNIVERSITY OF MICHIGAN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BRILLOUIN; COMPUTATIONAL FRAMEWORK; COMPUTATIONAL MATERIALS SCIENCE; EXPERIMENTAL OBSERVATION; EXTERNAL LOADS; INTEGRATED MODELS; MANUFACTURING PROCESS; MAXIMUM LOAD; NONLINEAR MATERIAL BEHAVIOR; NONLOCAL CONTINUUMS; NOVEL POLYMERS; PLAIN WEAVE TEXTILE COMPOSITES; POLYMER COMPOSITE; POLYMER NETWORKS; RAMAN LIGHT SCATTERING; SERVICE LOADS; TEXTILE COMPOSITE; ULTIMATE LOADS;

CARBON FIBERS; CHEMICAL PROPERTIES; COMPOSITE MATERIALS; CURING; POLYMERS; STRUCTURAL DYNAMICS; TEXTILES;

WEAVING;

CARBON FIBERS; COMPOSITES; CURING; OPTICAL SCATTERING; RAMAN SPECTRA; TEXTILES; WEAVING;

EID: 84872477813     PISSN: 02734508     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.2514/6.2011-1745     Document Type: Conference Paper

References (103)

1. Song, S., Compression Response of Tri-axially Braided Textile Composites, Ph.D. thesis, University of Michigan, Ann Arbor, 2007.
2. Song, S., Waas, A. M., Shahwan, K. W., Xiao, X., and Faruque, O., "Braided textile composites under compressive loads: Modeling the response, strength and degradation," Composites Science and Technology, Vol. 67, No. 15-16, 2007, pp. 3059 - 3070.
3. Song, S., Waas, A. M., Shahwan, K. W., Faruque, O., and Xiao, X., "Compression Response of 2D Braided Textile Composites: Single Cell and Multiple Cell Micromechanics Based Strength Predictions," Journal of Composite Materials, Vol. 42, No. 23, 2008, pp. 2461-2482.
4. Song, S., Waas, A. M., Shahwan, K. W., Faruque, O., and Xiao, X. S., "Compression response, strength and post-peak response of an axial fiber reinforced tow," International Journal of Mechanical Sciences, Vol. 51, No. 7, 2009, pp. 491 - 499.
5. Song, S., Waas, A. M., Shahwan, K. W., Faruque, O., and Xiao, X., "Effects of Matrix Microcracking on the Response of 2D Braided Textile Composites Subjected to Compression Loads," Journal of Composite Materials, Vol. 44, No. 2, 2010, pp. 221-240.
6. Yerramalli, C. S. and Waas, A. M., "In Situ Matrix Shear Response Using Torsional Test Data of Fiber Reinforced Unidirectional Polymer Composites," Journal of Engineering Materials and Technology, Vol. 124, No. 2, 2002, pp. 152-159.
7. Ramakrishnan, B., Zhu, L., and Pitchumani, R., "Curing of Composites Uning Internal Resistive Heating," Journal of Manufacturing Sciences and Egnieering, Vol. 122, 2000, pp. 124-131.
8. Shanku, R., Vaughan, J., and Roux, J., "Rheological Characteristics and Cure Kinetics of EPON 862/W Epoxy Used in Pultrusion," Advances in Polymer Technology, Vol. 16, No. 4, 1997, pp. 297-311.
9. O'Brien, D. J. and White, S. R., "Cure Kinetics, Gelation, and Glass Transition of Bisphenol F Epoxide," Polymer Engineering and Science, Vol. 43, No. 4, 2003, pp. 863-874.
10. Xie, D. and Waas, A. M., "Discrete cohesive zone model for mixed-mode fracture using finite element analysis," Engineering Fracture Mechanics, Vol. 73, No. 13, 2006, pp. 1783 - 1796.
11. Xie, D., Salvi, A. G., Sun, C., Waas, A. M., and Caliskan, A., "Discrete Cohesive Zone Model to Simulate Static Fracture in 2D Triaxially Braided Carbon Fiber Composites," Journal of Composite Materials, Vol. 40, No. 22, 2006, pp. 2025-2046.
12. Chaboche, J.-L., "Continuous damage mechanics - A tool to describe phenomena before crack initiation," Nuclear Engineering and Design, Vol. 64, No. 2, 1981, pp. 233-247.
13. Lemaitre, J. and Desmorat, R., Engineering Damage Mechanics: Ductile, Creep, Fatigue and Brittle Failures, Springer-Verlag, 2005.
14. Lee, E. H., Rogers, T. G., and Woo, T. C., "Residual Stresses in a Glass Plate Cooled Symmetrically from Both Surfaces," Journal of the American Ceramic Society, Vol. 48, No. 9, 1965, pp. 480-487.
15. Ishikawa, Takashi, C. T.-W., "One-dimensional micromechanical analysis of woven fabric composites," AIAA journal, Vol. 21, No. 12, 1983, pp. 1714-1721.
16. Naik, N. and Shembekar, P., "Elastic Behavior of Woven Fabric Composites: Lamina Analysis," Journal of Composite Materials, Vol. 26, No. 15, 1992, pp. 2196-2225.
17. Sankar, B. V. and Marrey, R. V., "A unit-cell model of textile composite beams for predicting stiffness properties," Composites Science and Technology, Vol. 49, No. 1, 1993, pp. 61 - 69.
18. Naik, N. and Ganesh, V., "Prediction of on-axes elastic properties of plain weave fabric composites," Composites Science and Technology, Vol. 45, No. 2, 1992, pp. 135 - 152.
19. Zhang, Y. C. and Harding, J., "A numerical micromechanics analysis of the mechanical properties of a plain weave composite," Computers & Structures, Vol. 36, No. 5, 1990, pp. 839 - 844.
20. Karkkainen, R. L. and Sankar, B. V., "A direct micromechanics method for analysis of failure initiation of plain weave textile composites," Composites Science and Technology, Vol. 66, No. 1, 2006, pp. 137 - 150.
21. Tsai, S. W. and Hahn, H. T., Introduction to composite materials, Technomic Publishing Company, Inc., Lnacaster, PA, 1980.
22. Whitcomb, J. and Srirengan, K., "Effect of various approximations on predicted progressive failure in plain weave composites," Composite Structures, Vol. 34, No. 1, 1996, pp. 13 - 20.
23. Quek, S. C., Waas, A. M., Shahwan, K. W., and Agaram, V., "Analysis of 2D triaxial flat braided textile composites," International Journal of Mechanical Sciences, Vol. 45, No. 6-7, 2003, pp. 1077 - 1096.
24. Quek, S. C., Waas, A., Shahwan, K. W., and Agaram, V., "Compressive response and failure of braided textile composites: Part 2-computations," International Journal of Non-Linear Mechanics, Vol. 39, No. 4, 2004, pp. 649 - 663.
25. Hill, R., "A Theory of the Yielding and Plastic Flow of Anisotropic Metals," Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences, Vol. 193, No. 1033, 1948, pp. pp. 281-297.
26. Rabearison, N., Jochum, C., and Grandidier, J., "A FEM coupling model for properties prediction during the curing of an epoxy matrix," Computational Materials Science, Vol. 45, No. 3, 2009, pp. 715 - 724, Proceedings of the 17th International Workshop on Computational Mechanics of Materials - IWCMM-17.
27. Corden, T. J., Jones, I. A., Jones, D. T., and Middleton, V., "The mechanisms of interlaminar cracking in thick resin transfer moulded composite cylinders," Composites Part A: Applied Science and Manufacturing, Vol. 29, No. 4, 1998, pp. 455 - 464.
28. Plepys, A. and Farris, R., "Evolution of residual stresses in three-dimensionally constrained epoxy resins," Polymer, Vol. 31, No. 10, 1990, pp. 1932 - 1936.
29. Chekanov, Y. A., Korotkov, V. N., Rozenberg, B. A., Dhzavadyan, E. A., and Bogdanova, L. M., "Cure shrinkage defects in epoxy resins," Polymer, Vol. 36, No. 10, 1995, pp. 2013 - 2017.
30. Darrow, D. A. and Smith, L. V., "Isolating Components of Processing Induced Warpage in Laminated Composites," Journal of Composite Materials, Vol. 36, No. 21, 2002, pp. 2407-2419.
31. Fernlund, G., Rahman, N., Courdji, R., Bresslauer, M., Poursartip, A., Willden, K., and Nelson, K., "Experimental and numerical study of the effect of cure cycle, tool surface, geometry, and lay-up on the dimensional fidelity of autoclave-processed composite parts," Composites Part A: Applied Science and Manufacturing, Vol. 33, No. 3, 2002, pp. 341 - 351.
32. Albert, C. and Fernlund, G., "Spring-in and warpage of angled composite laminates," Composites Science and Technology, Vol. 62, No. 14, 2002, pp. 1895 - 1912.
33. Johnston, A., Vaziri, R., and Poursartip, A., "A Plane Strain Model for Process-Induced Deformation of Laminated Composite Structures," Journal of Composite Materials, Vol. 35, No. 16, 2001, pp. 1435-1469.
34. Kim, J. W., Lee, J. H., Kim, H. G., Kim, H. S., and Lee, D. G., "Reduction of residual stresses in thick-walled composite cylinders by smart cure cycle with cooling and reheating," Composite Structures, Vol. 75, No. 1-4, 2006, pp. 261 - 266, Thirteenth International Conference on Composite Structures - ICCS/13.
35. Kim, K. and Hahn, H., "Residual stress development during processing of graphite/epoxy composites," Composites Science and Technology, Vol. 36, No. 2, 1989, pp. 121 - 132.
36. White, S. and Hahn, H., "Cure Cycle Optimization for the Reduction of Processing-Induced Residual Stresses in Composite Materials," Journal of Composite Materials, Vol. 27, No. 14, 1993, pp. 1352-1378.
37. Shrotriya, P., Sottos, N. R., and Skipor, A. F., "Residual Stress Development during Relamination of Woven Composite Circuit Boards," Journal of Composite Materials, Vol. 35, No. 10, 2001, pp. 905-927.
38. Capehart, T., Muhammad, N., and Kia, H. G., "Compensating Thermoset Composite Panel Deformation using Corrective Molding," Journal of Composite Materials, Vol. 41, No. 14, 2007, pp. 1675-1701.
39. Kamal, M. R., "Thermoset Characterization for Moldability Analysis," Polymer Engineering and Science, Vol. 14, No. 3, 1974, pp. 231-239.
40. Plepys, A., Vratsanos, M. S., and Farris, R. J., "Determination of residual stresses using incremental linear elasticity," Composite Structures, Vol. 27, No. 1-2, 1994, pp. 51 - 56, Special Issue Advances in Fiber Reinforced Composites Technology.
41. Bogetti, T. A. and Gillespie, J. W., "Process-Induced Stress and Deformation in Thick-Section Thermoset Composite Laminates," Journal of Composite Materials, Vol. 26, No. 5, 1992, pp. 626-660.
42. Adolf, D. B., Martin, J. E., Chambers, R. S., Burchett, S. N., and Guess, T. R., "Stresses during thermoset cure," Journal of Materials Research, Vol. 13, 1998, pp. 530-550.
43. Adolf, D. and Chambers, R., "Verification of the capability for quantitative stress prediction during epoxy cure," Polymer, Vol. 38, 1997, pp. 5481-5490.
44. White, S. and Hahn, H., "Process Modeling of Composite Materials: Residual Stress Development during Cure. Part I. Model Formulation," Journal of Composite Materials, Vol. 26, No. 16, 1992, pp. 2402-2422.
45. Lange, J., Toll, S., Mnson, J.-A. E., and Hult, A., "Residual stress build-up in thermoset films cured above their ultimate glass transition temperature," Polymer, Vol. 36, No. 16, 1995, pp. 3135 - 3141.
46. Adolf, D. B. and Chambers, R. S., "A thermodynamically consistent, nonlinear viscoelastic approach for modeling thermosets during cure," Journal of Rheology, Vol. 51, No. 1, 2007, pp. 23-50.
47. Adolf, D. B., Chambers, R. S., and Caruthers, J. M., "Extensive validation of a thermodynamically consistent, nonlinear viscoelastic model for glassy polymers," Polymer, Vol. 45, No. 13, 2004, pp. 4599 - 4621.
48. Mai, Y., Yee, A. F., Wineman, A. S., and Xiao, C., "Streff evolution during thermoset cure," Material Research Society Symposia Proceedings, Vol. 515, 1998.
49. Mei, Y., Stress Evolution in a Conductive Adhesive during Curing and Cooling, Ph.D. thesis, University of Michigan, Ann Arbor, Michigan, 2000.
50. Li, M., Zhu, Q., Geubelle, P. H., and Tucker III, C. L., "Optimal curing for thermoset matrix composites: Thermo-chemical considerations," Polymer Composites, Vol. 22, No. 1, 2001, pp. 118 - 131.
51. Gopal, A. K., Adali, S., and Verijenko, V. E., "Optimal temperature profiles for minimum residual stress in the cure process of polymer composites," Composite Structures, Vol. 48, No. 1-3, 2000, pp. 99 - 106.
52. Zhu, Q. and Geubelle, P. H., "Dimensional Accuracy of Thermoset Composites: Shape Optimization," Journal of Composite Materials, Vol. 36, No. 6, 2002, pp. 647-672.
53. Fung, Y., A First Course in Continuum Mechanics, Prentence Hall, Englewood Cliffs, 3rd ed., 1994.
54. Doghri, I., Mechanics of Deformable Solids, Springer Verlag, Berlin, 2000.
55. Ramos, J., Pagani, N., Riccardi, C., Borrajo, J., Goyanes, S., and Mondragon, I., "Cure kinetics and shrinkage model for epoxy-amine systems," Polymer, Vol. 46, No. 10, 2005, pp. 3323 - 3328.
56. Beyer, M. K. and Clausen-Schaumann, H., "Mechanochemistry: The Mechanical Activation of Covalent Bonds," Chemical Reviews, Vol. 105, 2005, pp. 2921 - 2948.
57. Ikegawa, N., Hamada, H., and Maekawa, Z., "Effect of compression process on void behavior in structural resin transfer molding," Polymer Engineering & Science, Vol. 36, No. 7, 1996, pp. 953-962.
58. Rudd, C., ASM Handbook, Vol. 21-Composites, chap. Resin transfer modling and strutural reaction injection molding, ASM International, 2001, pp. 493-500.
59. Revello, M., Saggese, L., and Gaiero, E., Comprehensive Composite Materials, chap. Compression Molding of SMCs, Elsevier, Amsterdam, 2000, pp. 763-805.
60. Hossain, M., Possart, G., and Steinmann, P., "A small-strain model to simulate the curing of thermosets," Computational Mechanics, Vol. 43, 2009, pp. 769 - 779.
61. Salvi, A. and Waas, A. M., "Report to the Automotive Composite Consortium: Static and Dynamic Fracture of Carbon Fiber Reinforced Braided Composites," Tech. rep., University of Michigan, January 2005.
62. de Souza Neto, E. A., Perić, D., and Owen, D. R. J., Computational Methods for Plasticity: Theory and Applications, John Wiley & Sons, Ltd, 2008.
63. Kachanov, L., "Rupture Time Under Creep Conditions," International Journal of Fracture, Vol. 97, 1999, pp. 11-18, 10.1023/A:1018671022008.
64. Rabotnov, Y., "On the Equations of State for Creep," Proceedings of the Institution of Mechanical Engineers, Conference Proceedings 1964-1970 (vols 178-184), Various titles labelled Volumes A to S, pp. 117-122.
65. Leckie, F. and Hayhurst, D., "Constitutive equations for creep rupture," Acta Metallurgica, Vol. 25, No. 9, 1977, pp. 1059 - 1070.
66. Lemaitre, J. and Chaboche, J.-L., Mechanics of Solid Materials, Cambridge University Press, 1994.
67. Lemaitre, J., "A Continuous Damage Mechanics Model for Ductile Fracture," Journal of Engineering Materials and Technology, Vol. 107, No. 1, 1985, pp. 83-89.
68. Jirásek, M. and Bažant, Z. P., Inelastic Analysis of Structures, John Wiley & Sons, Ltd, 2002.
69. de Borst, R., "Computation of post-bifurcation and post-failure behavior of strain-softening solids," Computers & Structures, Vol. 25, No. 2, 1987, pp. 211 - 224.
70. Bažant, Z. and Oh, B., "Crack band theory for fracture of concrete," Materials and Structures, Vol. 16, 1983, pp. 155-177, 10.1007/BF02486267.
71. Peerlings, R. H. J., Geers, M. G. D., de Borst, R., and Brekelmans, W. A. M., "A critical comparison of nonlocal and gradient-enhanced softening continua," International Journal of Solids and Structures, Vol. 38, No. 44-45, 2001, pp. 7723 - 7746.
72. Bažant, Z., "Imbricate Continuum and its Variational Derivation," Journal of Engineering Mechanics, Vol. 110, 1984, pp. 1693-1712.
73. Pijaudier-Cabot, G. and Bažant, Z. P., "Nonlocal Damage Theory," Journal of Engineering Mechanics, Vol. 113, 1987, pp. 1512-1533.
74. M H.-B., "A variational principle for gradient plasticity," International Journal of Solids and Structures, Vol. 28, No. 7, 1991, pp. 845 - 857.
75. Lasry, D. and Belytschko, T., "Localization limiters in transient problems," International Journal of Solids and Structures, Vol. 24, No. 6, 1988, pp. 581 - 597.
76. Peerlings, R., de Borst, R., Brekelmans, W. A. M., and de Vree, J. H. P., "Gradient enhanced damage for quasi-brittle materials," International Journal for Numerical Methods in Engineering, Vol. 39, 1996, pp. 3391-3403.
77. Dorgan, R. J., A nonlocal model for coupled damage-plasticity incorporating gradients of internal state variables at multiscales, Ph.D. thesis, Louisiana State University, Baton Rouge, Louisiana.
78. Askes, H., Pamin, J., and de Borst, R., "Dispersion analysis and element-free Galerkin solutions of second- and fourth-order gradient-enhanced damage models," International Journal for Numerical Methods in Engineering, Vol. 49, 2000.
79. Askes, H. and Sluys, L. J., "Explicit and implicit gradient series in damage mechanics," European Journal of Mechanics - A/Solids, Vol. 21, No. 3, 2002, pp. 379 - 390.
80. Dorgan, R. J. and Voyiadjis, G. Z., "A Mixed Finite Element Implementation of a Gradient-enhanced Coupled Damage Plasticity Model," International Journal of Damage Mechanics, Vol. 15, No. 3, 2006, pp. 201-235.
81. Geers, M. G. D., Ubachs, R. L. J. M., and Engelen, R. A. B., "Strongly non-local gradient-enhanced finite strain elastoplasticity," International Journal for Numerical Methods in Engineering, Vol. 56, 2003, pp. 2039-2068.
82. Engelen, R. A. B., Geers, M. G. D., and Baaijens, F. P. T., "Nonlocal implicit gradient-enhanced elasto-plasticity for the modelling of softening behaviour," International Journal of Plasticity, Vol. 19, No. 4, 2003, pp. 403 - 433.
83. Challamel, N., "A variationally based nonlocal damage model to predict diffuse microcracking evolution," International Journal of Mechanical Sciences, Vol. 52, No. 12, 2010, pp. 1783 - 1800.
84. Chike, K. E., Myrick, M. L., Lyon, R. E., and Angel, S. M., "Raman and Near-Infrared Studies of an Epoxy Resin," Appl. Spectrosc., Vol. 47, No. 10, 1993, pp. 1631-1635.
85. Merad, L., Cochez, M., Margueron, S., Jauchem, F., Ferriol, M., Benyoucef, B., and Bourson, P., "In-situ monitoring of the curing of epoxy resins by Raman spectroscopy," Polymer Testing, Vol. 28, No. 1, 2009, pp. 42 - 45.
86. Yamura, H., Matsukawa, M., Otani, T., and Ohtori, N., "Brillouin Scattering Study on the Elastic Properties of Epoxy Adhesive Layer," Japanese Journal of Applied Physics, Vol. 38, No. Part 1, No. 5B, 1999, pp. 3175-3178.
87. O'Brian, D. J., Mather, P. T., and White, S. R., "Viscoelastic Properties of an Epoxy Resin during Cure," Journal of Composite Materials, Vol. 35, 2001, pp. 883 - 904.
88. Li, C., Potter, K., Wisnom, M. R., and Stringer, G., "In-situ measurement of chemical shrinkage of MY750 epoxy resin by a novel gravimetric method," Composites Science and Technology, Vol. 64, No. 1, 2004, pp. 55 - 64.
89. Lange, J., Toll, S., Månson, J.-A. E., and Hult, A., "Residual stress build-up in thermoset films cured below their ultimate glass transition temperature," Polymer, Vol. 38, No. 4, 1997, pp. 809 - 815.
90. Yates, B., McCalla, B. A., Phillips, L. N., Kingston-Lee, D. M., and Rogers, K. F., "The thermal expansion of carbon fibre-reinforced plastics," Journal of Materials Science, Vol. 14, 1979, pp. 1207-1217, 10.1007/BF00561306.
91. Bujard, P., Kuhnlein, G., Ino, S., and Shiobara, T., "Thermal conductivity of molding compounds for plastic packaging," Electronic Components and Technology Conference, 1994. Proceedings., 44th, May 1994, pp. 159-163.
92. Hexion Specialty Chemicals, Inc., "Diglycidyl Ether of Bisphenol F (DGEBF) - Performance Properties,".
93. Varshney, V., Patnaik, S. S., Roy, A. K., and Farmer, B. L., "Molecular Dynamics Study of Thermal Transport Phenomena in Cross-linked Polymer: Epon 862 with Curing Agent W (DETDA),".
94. Schapery, R., "Mechanical characterization and analysis of inelastic composite laminates with growing damage," Proceedings of the Third ASCE/ASME Joint Mechanics Conference, San Diego, July 1989.
95. Schapery, R., "A theory of mechanical behavior of elastic media with growing damage and other changes in structure," Journal of the Mechanics and Physics of Solids, Vol. 38, No. 2, 1990, pp. 215 - 253.
96. Schapery, R. and Sicking, S., "On nonlinear constitutive equations for elastic and viscoelastic composites with growing damage," Mechanical behavior of materials; invited papers presentet at the Seventh International Conference on Mechanical Behavior of Materials - ICM7, 1995.
97. Chen, C., Justice, R. S., Schaefer, D. W., and Baur, J. W., "Highly dispersed nanosilica-epoxy resins with enhanced mechanical properties," Polymer, Vol. 49, No. 17, 2008, pp. 3805 - 3815.
98. Zunjarrao, S. C. and Singh, R. P., "Characterization of the fracture behavior of epoxy reinforced with nanometer and micrometer sized aluminum particles," Composites Science and Technology, Vol. 66, No. 13, 2006, pp. 2296 - 2305.
99. Simulia, ABAQUS 6.9 manual, Dassault Systems, 2009.
100. C. Heinrich, Aldridge, M., Wineman, A., Kieffer, J., and Waas, A., "The influence of fiber packing on the homogenized response of cured fiber composites," 25th Annual Technical Conference American Society for Composites, 2010.
101. Geers, M. G. D., de Borst, R., Brekelmans, W. A. M., and Peerlings, R. H. J., "Strain-based transient-gradient damage model for failure analyses," Computer Methods in Applied Mechanics and Engineering, Vol. 160, No. 1-2, 1998, pp. 133 - 153.
102. Riks, E., "The Application of Newton's Method to the Problem of Elastic Stability," Journal of Applied Mechanics, Vol. 39, No. 4, 1972, pp. 1060-1065.
103. Riks, E., "An incremental approach to the solution of snapping and buckling problems," International Journal of Solids and Structures, Vol. 15, No. 7, 1979, pp. 529 - 551.