Basic computational tools and mechanical hardware for torque-based diagnostic of machining operations

Journal of Intelligent Manufacturing

Volumn 24, Issue 1, 2013, Pages 147-161

  Tansel, I N ^a   Demetgul, M ^b   Bickraj, K ^a   Kaya, B ^c   Ozcelik, B ^c  

^a Florida International University   (United States)

^b MARMARA UNIVERSITY   (Turkey)

^c GEBZE TECHNICAL UNIVERSITY   (Turkey)

Author keywords

Chatter detection; Dynamometer; Milling; Multi spindle machining; Tool wear estimation; Torque based machining monitor

Indexed keywords

COMPUTATIONAL TOOLS; COST EFFECTIVE; CUTTING TORQUE; DETECTION ALGORITHM; MACHINING OPERATIONS; MECHANICAL COMPONENTS; MULTI-SPINDLE; PIEZOELECTRIC COMPOSITE; STANDARD DEVIATION; TOOL LIFE; TOOL WEAR; TORQUE SIGNALS; TORQUE-BASED;

COMPUTATIONAL METHODS; COMPUTER HARDWARE; HARDWARE; MACHINING CENTERS; MILLING (MACHINING); SIGNAL DETECTION; TORQUE;

DYNAMOMETERS;

EID: 84872374243     PISSN: 09565515     EISSN: 15728145     Source Type: Journal    
DOI: 10.1007/s10845-011-0550-4     Document Type: Article

References (53)

1. Albrecht A., Park S. S., Altintas Y., Pritschow G. (2005) High frequency bandwidth cutting force measurement in milling using capacitance displacement sensors. International Journal of Machine Tools and Manufacturing 45: 993-1008
2. Altintas Y. (1992) Prediction of cutting forces and tool breakage in milling from feed drive current measurements. ASME Journal of Engineering for Industry 114: 386-392
3. APC International Ltd. (2002). Piezoelectric ceramics: Principles and applications. APC International Ltd.
4. Auchet S., Chevrier P., Lacour M., Lipinski P. (2004) A new method of cutting force measurement based on command voltages of active electro-magnetic bearings. International Journal of Machine Tools and Manufacturing 44: 1441-1449
5. Bao W. Y., Tansel I. N. (2000) Modeling micro-end-milling operations: III. Influence of tool wear. International Journal of Machine Tools and Manufacture 40: 2193-2211
6. Benes, J. (2006). Precision care for high-speed spindles: Care in design and application delivers high performance and productivity. American Machinist.
7. Castro L. R., Vie′villeb P., Lipinski P. (2006) Correction of dynamic effects on force measurements made with piezoelectric dynamometers. International Journal of Machine Tools and Manufacturing 46: 1707-1715
8. Choi Y., Narayanaswami R., Chandra A. (2004) Tool wear monitoring in ramp cuts in end milling using the wavelet transform. International Journal of Advanced Manufacturing Technology 23(5-6): 419-428
9. Dimla E. (2000) Sensor signals for tool-wear monitoring in metal cutting operations - a review of methods. International Journal of Machine Tools and Manufacturing 40(8): 1073-1098
10. Figliola R. S., Beasley D. E. (2005) Theory and design for mechanical measurements. Wiley, New York
11. Frank Pai P. (2010) Online tracking of instantaneous frequency and amplitude of dynamical system response. Mechanical Systems and Signal Processing 24: 1007-1024
12. Gale, N. (2004). Twin-spindle design benefits production. Tooling & Production.
13. Heynes P. (2007) Tool condition monitoring using vibration measurements - a review. British Institute of Non-Destructive Testing 49(8): 447-450
14. Huang P. T., Chen J. C. (2000) Neural network-based tool breakage monitoring system for end milling operations. Journal of Industrial Technology 16(2): 2-7
15. Jemielniak K., Kwiatkowski L., Wrzosek P. (1998) Diagnosis of tool wear based on cutting forces and AE measures as inputs to neural network. Journal of Intelligent Manufacturing 9: 447-455
16. Jeong Y. H., Cho D. W. (2002) Estimating cutting force from rotating and stationary feed motor currents on a milling machine. International Journal of Machine Tools and Manufacturing 42: 1559-1566
17. Jun M. B., Ozdoganlar O. B., DeVor R. E., Kapoor S. G., Kirchheim A., Schaffner G. (2002) Evaluation of a spindle-based force sensor for monitoring and fault diagnosis of machining operations. International Journal of Machine Tools and Manufacturing 42: 741-751
18. Juo R. (2000) Multi-sensor integration for on-line tool wear estimation through artificial neural networks and fuzzy neural network. Engineering Applications of Artificial Intelligence 13: 249-261
19. Kamarthi, S. V. (1994). On-line tool wear estimation in turning through sensor data fusion and neural networks. Dissertation, Pennsylvania State University.
20. Kim J. D., Kim D. S. (1997) Development of a combined-type tool dynamometer with a piezo-film accelerometer for an ultra-precision lathe. Journal of Materials Processing Technology 71: 360-366
21. Kim T. Y., Kimt J. (1996) Adaptive cutting force control for a machining center by using indirect cutting force measurements. International Journal of Machine Tools and Manufacturing 36(8): 925-937
22. Korkut I. (2003) A dynamometer design and its construction for milling operation. Materials and Design 24(8): 631-637
23. Korn, D. (2007). Rapid traverse redefining multi-spindle machining. Modern Machine Shop.
24. Lapujoulade, F. (1997). Measuring of cutting forces during fast transient periods. In 1st French and German conference on H.S.M.
25. Lee J. M., Choi D. K., Kim J., Chu C. N. (1995) Real-time tool breakage monitoring for NC milling process. Annals of the CIRP 44(1): 59-62
26. Lee B., Tarng Y. (1999) Application of the discrete wavelet transform to the monitoring of tool failure in end milling using the spindle motor current. International Journal of Advanced Manufacturing Technology 15(3): 238-243
27. Liang S., Hecker R., Landers R. (2004) Machining process monitoring and control: The state-of-the-art. Journal of Manufacturing Science and Engineering 124(2): 297-310
28. Long Y., Huang Y., Su X. (2010) Combined effects of Flank and Crater wear on cutting force modeling in orthogonal machining - part II - Bayesian approach-based model validation. Machining Science and Technology 14: 24-42. doi: 10.1080/1091034100367715
29. Maragos P., Kaiser J. F., Quatieri T. F. (1993) Energy separation in signal modulations with application to speech analysis. IEEE Transactions on Signal Processing 41: 3024-3051
30. Ming D., Wan B., Hu Y., Wang Y. (2005) A new dynamometer walker system for the measurement of handle reaction vector (HRV). Measurement Science and Technology 16: 1272-1280
31. Minis I. E., Magrab E. B., Pandelidis I. O. (1990) Improved methods for the prediction of chatter in turning, part 3: A generalized linear theory. Journal of Engineering and Industrial 112: 28-35
32. Murray, J. (1998). Dual-spindles shave production time. Tooling & Production.
33. Rehorn A. G., Jiang J., Orban P. E. (2005) State-of-the-art methods and results in tool condition monitoring: a review. International Journal of Advanced Manufacturing Technology 26(7): 693-710
34. Rincon, D. M. (1993). Coupled force and vibration modeling of drills with complex cross sectional geometries. Dissertation, University of Michigan Ann Arbor.
35. Rubio E. M., Teti R. (2009) Cutting parameters analysis for the development of a milling process monitoring system based on audible energy sound. Journal of Intelligent Manufacturing 20(1): 43-54
36. Scheffer C., Heyns P. S. (2004) An industrial tool wear monitoring system for interrupted turning. Mechanical Systems and Signal Processing 18: 1219-1242
37. Schmitz T. L., Medicus K., Dutterer B. (2002) Exploring once-per-revolution audio signal variance as a chatter indicator. Machining Science and Technology 6(2): 215-233
38. Schmitz T., Stanislaus C., Charles S., Robert Z., John C. (2006) Enhanced damping in long slender end mills. Journal of Manufacturing Processes 8(1): 39-46
39. Seker U., Kurt A., Ciftci I. (2002) Design and construction of a dynamometer for measurement of cutting forces during machining with linear motion. Materials and Design 23(4): 355-360
40. Signal Processing Tool box™ 6, Getting Started Guide. (2008). The Math works. Avialable via DIALOG. http://www.mathworks.com/access/helpdesk/help/ pdf-doc/signal/signals.pdf. Accessed 22 Jan 2008.
41. Sirohi J., Chopra I. (2000) Fundamental understanding of piezoelectric strain sensors. Journal of Intelligent Material Systems and Structures 11(4): 246-257. doi: 10.1106/8BFB-GC8P-XQ47-YCQ0
42. Stein J. L., Wang C. H. (1990) Analysis of power monitoring in ac induction drive systems. Journal of Dynamic Systems, Measurement and Control 112: 239-248
43. Stockwell R. G., Mansinha L., Lowe R. P. (1996) Localization of the complex spectrum: The S transform. IEEE Transactions on Signal Processing 44(4): 998-1001
44. Tangjitsitcharoen, S. (2006). Advance in detection system to improve the stability and capability of CNC turning process. Journal of Intelligent Manufacturing. doi: 10.1007/s10845-009-0355-x.
45. Tlusty, J., Jang, D. Y., & Tarng, YS. (1987). Measurement of the milling force over the wide approved dynamic response. In Proceedings of 15th NAMRC (pp. 273-280).
46. Tounsi N., Otho A. (2000a) Dynamic cutting force measuring. International Journal of Machine Tools and Manufacturing 40: 1157-1170
47. Tounsi N., Otho A. (2000b) Identification of machine-tool-workpiece system dynamics. International Journal of Machine Tools and Manufacturing 40: 1367-1384
48. Vakman D. (1996) On the analytic signal, the Teager-Kaiser energy algorithm, and other methods for defining amplitude and frequency. IEEE Transactions on Signal Processing 44: 791-797
49. YaldIz, S., Unsacar, F. (2006). A dynamometer design for measurement the cutting.
50. YaldIz S., Unsacar F., Saglam H., IsIk H. (2007) Design, development and testing of a four-component milling dynamometer for the measurement of cutting force and torque. Mechanical Systems and Signal Processing 21: 1499-1511
51. Yan, T., Jones, B. E., Astrup, J., Rakowski, R. T., Tudor, M. J., & Beeby, S. P. et al. (2004). Stiff load cell with high overload capability and direct frequency output. In Eurosensors XVIII conference, Rome, Italy (pp. 442-443).
52. Yapici, A., Bickraj, K., Yenilmez, A., Li, M., Tansel, I. N., & Martin, S. A. (2007). Representation of the characteristics of Piezoelectric fiber composites with neural networks. In AIP conference proceedings (Vol. 894, pp. 918-925).
53. Yenilmez, A., Yapici, A., Velez, C., & Tansel, I. N. (2007). Development of piezoelectric strain gages for structural health monitoring applications. In AIP conference proceedings (Vol. 894, pp. 902-909).