Effect of SiC filler content on microstructure and flexural strength of highly porous SiC ceramics fabricated from carbon-filled polysiloxane

Journal of the Korean Ceramic Society

Volumn 49, Issue 6, 2012, Pages 625-630

  Eom, Jung Hye ^a   Kim, Young Wook ^a   Song, In Hyuck ^b  

^a University of Seoul   (South Korea)

^b Korea Institute of Material Science   (South Korea)

Author keywords

Compression molding; Porosity; Porous ceramics; Silicon carbide; Strength

Indexed keywords

CARBON BLACK FILLERS; EXPANDABLE MICROSPHERES; FILLER CONTENTS; INTERCONNECTED POROSITY; NITROGEN ATMOSPHERES; POROUS CERAMICS; POROUS SIC; POWDER MIXTURES; PYROLYSIS PROCESS; STRENGTH;

ALUMINUM NITRIDE; CARBON BLACK; CARBOTHERMAL REDUCTION; CERAMIC MATERIALS; COMPRESSION MOLDING; ETHERS; FILLERS; POROSITY; POROUS SILICON; SILICONES; SINTERING;

SILICON CARBIDE;

EID: 84872017002     PISSN: 12297801     EISSN: None     Source Type: Journal    
DOI: 10.4191/kcers.2012.49.6.625     Document Type: Article

References (33)

1. I. M. Kwon, I. H. Song, Y. J. Park, J. W. Lee, H. S. Yun, and H. D. Kim, "The Synthesis and Pore Property of Hydrogen Membranes Derived from Polysilazane as Inorganic Polymer," J. Kor. Ceram. Soc., 46 [5] 462-66 (2009).
2. G. S. Cho, G. M. Kim, and S. W. Park, "Fabrication of Porous Reaction Bonded Silicon Carbide with Multi-Layered Pore Structures," J. Kor. Ceram. Soc., 46 [5] 534-39 (2009).
3. W. Y. Kim, H. B. Ji, T. Y. Yang, S. Y. Yoon, and H. C. Park, "Preparation of Porous Mullite Composites through Recycling of Coal Fly Ash," J. Kor. Ceram. Soc., 47 [2] 151-56 (2010).
4. Y. H. Choi, Y.-W. Kim, S. K. Woo, and I. S. Han, "Effect of Starting Particle Size on Nitridation and Strength of Silicon Nitride-Bonded Silicon Carbide Ceramics," J. Kor. Ceram. Soc., 47 [2] 157-62 (2010).
5. J. S. Ha, B. G. Lim, G. H. Doh, I. A. Kang, and C. S. Kim, "Properties of Porous SiC Ceramics Prepared by Wood Template Method," J. Kor. Ceram. Soc., 47 [4] 308-11 (2010).
6. I. S. Han, D. W. Seo, S. Kim, K. S. Hong, S. K. Woo, and Y.-W. Kim, "Fabrication and Properties of SiC Candle Filter by Vacuum Extrusion and Ramming Process (II)," J. Kor. Ceram. Soc., 47 [6] 515-23 (2010).
7. B. V. M. Kumar and Y.-W. Kim, "Processing and Polysiloxane- Derived Porous Ceramics: A Review," Sci. Tech. Adv. Mater., 11 044303 (2010).
8. D. H. Kwak, J. H. Kim, E. J. Lee, and D. J. Kim, "Formation of Bioactive Ceramic Foams by Polymer Pyrolysis and Self- Blowing," J. Kor. Ceram. Soc., 48 [5] 412-17 (2011).
9. K. Y. Lim, Y.-W. Kim, I. H. Song, and J. S. Bae, "Flexural Strength of Macroporous Silicon Carbide Ceramics," J. Kor. Ceram. Soc., 48 [5] 360-67 (2011).
10. J. Park, Y. Kim, and M. Jung, "Preparation of Porous SiC Ceramics Using Polycarbosilane Derivatives as Binding Agents," J. Kor. Ceram. Soc., 49 [5] 412-16 (2012).
11. X. Zhu, D. Jiang, and S. Tan, "Preparation of Silicon Carbide Reticulated Porous Ceramics," Mater. Sci. Eng. A, 323 232- 38 (2002). (Pubitemid 34143688)
12. T. Ohji and M. Fukushima, "Macro-Porous Ceramics: Processing and Properties," Int. Mater. Rev., 57 [2] 115-31 (2012).
13. Y. Kim, K. Min, J. Shim, and D. J. Kim, "Formation of Porous SiC Ceramics via Recrystallization," J. Eur. Ceram. Soc., 32 3611-15 (2012).
14. S. H. Kim, Y.-W. Kim, J. Y. Yun, and H. D. Kim, "Fabrication of Porous SiC Ceramics by Partial Sintering and Their Properties," J. Kor. Ceram. Soc., 41 [7] 541-47 (2004).
15. M. Komac, "The Investigation of High-Temperature Strength of SiC Based Refractories," Ceram. Int., 7 [3] 103-5 (1981).
16. S. H. Lee and Y.-W. Kim, "Processing of Cellular SiC Ceramics Using Polymer Microbeads," J. Kor. Ceram. Soc., 43 [8] 458-62 (2006).
17. D. H. Jang, Y.-W. Kim, I. H. Song, H. D. Kim, and C. B. Park, "Processing of Highly Porous, Open-Cell, Microcellular Silicon Carbide Ceramics by Expansion Method Using Expandable Microspheres," J. Ceram. Soc. Jpn., 114 [6] 549-53 (2006). (Pubitemid 43837792)
18. L. Esposito, D. Sciti, A. Piancastelli, and A. Bellosi, "Microstructure and Properties of Porous β-SiC Templated from Soft Woods," J. Eur. Ceram. Soc., 24 [2] 533-40 (2004). (Pubitemid 37554341)
19. Y.-W. Kim, J. H. Eom, Y. Guo, W. Zhai, C. B. Park, and I. H. Song, "Processing of Open-Cell Silicon Carbide Foams by steam Chest Molding and Carbothermal Reduction," J. Am. Ceram. Soc., 94 [2] 344-47 (2011).
20. F. F. Lange and K. T. Miller, "Open Cell, Low-Density Ceramics Fabricated from Reticulated Polymer Substrates," Adv. Ceram. Mater., 2 [4] 827-31 (1987).
21. B. H. Yoon, C. S. Park, H. E. Kim, and Y. H. Koh, "In Situ Synthesis of Porous Silicon Carbide (SiC) Ceramics Decorated with SiC Nanowires," J. Am. Ceram. Soc., 90 [12] 3759-66 (2007).
22. R. Mouazer, I. Thijs, S. Mullens, and J. Luyten, "SiC Foams Produced by Gel Casting: Synthesis and Characterization," Adv. Eng. Mater., 6 [5] 340-43 (2004).
23. Y. J. Jin and Y.-W. Kim, "Low Temperature Processing of Highly Porous Silicon Carbide Ceramics with Improved Flexural Strength," J. Mater. Sci., 45 282-85 (2010).
24. S. H. Chae, Y.-W. Kim, I.H. Song, and H.D. Kim, "Porosity Control of Porous Silicon Carbide Ceramics," J. Eur. Ceram. Soc., 29 [13] 2867-72 (2009).
25. S. H. Chae and Y.-W. Kim, "Effect of Inert Filler Addition on Microstructure and Strength of Porous SiC Ceramics," J. Mater. Sci., 44 1401-6 (2009).
26. Y.-W. Kim, K.-Y. Lim, and K. J. Kim, "Electrical Resistivity of Silicon Carbide Ceramics Sintered with 1 wt% Aluminum Nitride and Rare Earth Oxide," J. Eur. Ceram. Soc., 32 4427-34 (2012).
27. K. J. Kim, S. Lee, J. H. Lee, M. H. Roh, K. Y. Lim, and Y.- W. Kim, "Structural and Optical Characteristics of Crystalline Silicon Carbide Nanoparticles Synthesized by Carbothermal Reduction," J. Am. Ceram. Soc., 92 [2] 424-28 (2009).
28. X. Zhu, D. Jiang, and S. Tan, "The Control of Slurry Rheology in the Processing of Reticulated Porous Ceramics," Mater. Res. Bull., 37 [3] 541-53 (2002). (Pubitemid 34232030)
29. P. Colombo, "Engineering Porosity in Polymer-Derived Ceramics," J. Eur. Ceram. Soc., 28 [7] 1389-95 (2008).
30. R. Mouazer, S. Mullens, I. Thijs, J. Luyten, and A. Buekenhoudt, "Silicon Carbide Foams by Polyurethane Replica Technique," Adv. Eng. Mater., 7 [12] 1124-28 (2005). (Pubitemid 43188187)
31. J. H. Eom, D. H. Jang, Y.-W. Kim, I. H. Song, and H. D. Kim, "Low Temperature Processing of Porous Silicon Carbide Ceramics by Carbothermal Reduction," J. Kor. Ceram. Soc., 43 [9] 552-57 (2006).
32. 2 Additives as Sintering Aids," J. Mater. Sci., 42 4960-66 (2007). (Pubitemid 47142121)
33. X. Yao, Z. Huang, and S. Tan, "Preparation of Silicon Carbide Reticulated Porous Ceramics Sintered at Low Temperature with PCS as Sintering Additive," J. Inorg. Mater., 25 [2] 168-72 (2010).