Flexural strength of macroporous silicon carbide ceramics

Journal of the Korean Ceramic Society

Volumn 48, Issue 5, 2011, Pages 360-367

  Lim, Kwang Young ^a   Kim, Young Wook ^a   Song, In Hyuck ^b   Bae, Ji Soo ^c  

^a University of Seoul   (South Korea)

^b Korea Institute of Material Science   (South Korea)

^c YJC Co Ltd   (South Korea)

Author keywords

Polysiloxane; Porosity; Porous ceramics; Silicon carbide; Strength

Indexed keywords

BENDING STRENGTH; FABRICATION; FILLED POLYMERS; FILLERS; POLYMERS; POROSITY; POROUS SILICON; SILICON; SILICON CARBIDE; SILICONES; SINTERING;

HOLLOW MICROSPHERE; LARGE AMOUNTS; MACRO POROUS SILICON; POLYMER PROCESSING; POROUS CERAMICS; POWDER PROCESSING; STARTING POWDERS; STRENGTH;

CERAMIC MATERIALS;

EID: 80055080577     PISSN: 12297801     EISSN: None     Source Type: Journal    
DOI: 10.4191/kcers.2011.48.5.360     Document Type: Article

References (40)

1. N. Keller, C. Pham-Huu, S. Roy, M. J. Ledoux, C. Estournes, and J. Guille, "Influence of the Preparation Conditions on the Synthesis of High Surface Area SiC for Use as a Heterogeneous Catalyst Support," J. Mater. Sci., 34 3189-202 (1999).
2. S.-S. Hwang and T.-W. Kim, "Fabrication and Properties of Reaction Bonded SiC Hot Gas Filter Using Si Melt Infiltration Method(in Korean)," J. Kor. Ceram. Soc., 40 [9] 891-96 (2003).
3. S. H. Lee and Y.-W. Kim, "Processing of Cellular SiC Ceramics Using Polymer Microbeads," J. Kor. Ceram. Soc., 43 [8] 458-62 (2006).
4. J. H. Eom, D. H. Jang, Y.-W. Kim, I. H. Song, and H. D. Kim, "Low Temperature Processing of Porous Silicon Carbide Ceramics by Carbothermal Reduction(in Korean)," J. Kor. Ceram. Soc., 43 [9] 552-57 (2006).
5. S. H. Yun, P. N. Tan, Y. D. Kim, and S. W. Park, "Effects of Amounts of Carbon Source and Infiltrated Si on the Porosity and Fracture Strength of Porous Reaction Bonded SiC(in Korean)," J. Kor. Ceram. Soc., 44 [7] 381-86 (2007).
6. S. H. Chae, Y.-W. Kim, I. H. Song, H. D. Kim, J. S. Bae, S. M. Na, and S. I. Kim, "Low Temperature Processing and Properties of Porous Frit-Bonded SiC Ceramics (in Korean)," J. Kor. Ceram. Soc., 46 [5] 488-92 (2009).
7. Y. H. Choi, Y.-W. Kim, S. K. Woo, and I. S. Han, "Effect of Template Content on Microstructure and Flexural Strength of Porous Mullite-Bonded Silicon Carbide Ceramics (in Korean)," J. Kor. Ceram. Soc., 47 [6] 509-14 (2010).
8. I. S. Han, D. W. Seo, S. Kim, K. S. Hong, S. K. Woo, and Y.-W. Kim, "Fabrication and Properties of SiC Candle Filter by Vacuum Extrusion and Ramming Process (II) (in Korean)," J. Kor. Ceram. Soc., 47 [6] 515-23 (2010).
9. I. H. Song, M. J. Park, H. D. Kim, Y.-W. Kim, and J. S. Bae, "Microstructure and Permeability Property of Si Bonded Porous SiC with Variations in the Carbon Content (in Korean)," J. Kor. Ceram. Soc., 47 [6] 546-52 (2010).
10. B. V. Manoj Kumar and Y.-W. Kim, "Processing of Polysiloxane-Derived Porous Ceramics: A Review," Sci. Technol. Adv. Mater., 11 [4] 044303 (2010).
11. S. H. Kim, Y.-W, Kim, J. Y. Yun, and H. D. Kim, "Fabrication of Porous SiC Ceramics by Partial Sintering and their Properties (in Korean)," J. Kor. Ceram. Soc., 41 [7] 541-47 (2004).
12. F. F. Lange and K. T. Miller, "Open Cell, Low-Density Ceramics Fabricated from Reticulated Polymer Substrates," Adv. Ceram. Mater., 2 [4] 827-31 (1987).
13. Y. J. Jin and Y.-W. Kim, "Low Temperature Processing of Highly Porous Silicon Carbide Ceramics with Improved Flexural Strength," J. Mater. Sci., 45 282-85 (2010).
14. Y.-W. Kim, S. H. Kim, I. H. Song, H. D. Kim, and C. B. Park, "Fabrication of Open-Cell, Microcellular Silicon Carbide Ceramics by Carbothermal Reduction," J. Am. Ceram. Soc., 88 [10] 2949-51 (2005). (Pubitemid 41557756)
15. Y.-W. Kim, J. H. Eom, C. Wang, and C. B. Park, "Processing of Porous Silicon Carbide Ceramics from Carbon-Filled Polysiloxane by Extrusion and Carbothermal Reduction," J. Am. Ceram. Soc., 91 [4] 1361-64 (2008). (Pubitemid 351474269)
16. Y.-W. Kim, S. H. Kim, C. Wang, and C. B. Park, "Fabrication of Microcellular Ceramics Using Gaseous Carbon Dioxide," J. Am. Ceram. Soc., 86 [12] 2231-33 (2003).
17. V. Z. Stavric and M. Hue, "Rekristallisiertes Siliziumkarbid," Keram. Zeit., 27 [3] 125-28 (1975).
18. B. V. Manoj Kumar, J. H. Eom, Y.-W. Kim, I. S. Han, and S. K. Woo, "Effect of Aluminum Source on Flexural Strength of Mullite-Bonded Porous Silicon Carbide Ceramics," J. Ceram. Soc. Jpn., 118 [1] 13-18 (2010).
19. Y. S. Chun and Y.-W. Kim, "Processing of Silica-Bonded Silicon Carbide Ceramics," J. Kor. Ceram. Soc., 43 [6] 327-32 (2006).
20. C. H. Choi, Y.-W. Kim, S. K. Woo, and I. S. Han, "Effect of Starting SiC Particle Size on Nitridation and Strength of Silicon Nitride-Bonded Silicon Carbide Ceramics (in Korean)," J. Kor. Ceram. Soc., 47 [2] 157-62 (2010).
21. K. S. Seo, S. W. Park, and H. B. Kwon, "Fabrication of Porous RBSC by Si Melt Infiltration (in Korean)," J. Kor. Ceram. Soc., 37 [11] 1119-25 (2000).
22. K. Y. Lim, Y.-W. Kim, S. K. Woo, and I. S. Han, "Effect of Si:C Ratio on Porosity and Flexural Strength of Porous Self-Bonded Silicon Carbide Ceramics (in Korean)," J. Kor. Ceram. Soc., 45 [5] 285-89 (2008).
23. K. Y. Lim, Y.-W. Kim, S. K. Woo, and I. S. Han, "Effect of Carbon Source on Porosity and Flexural Strength of Porous Self-Bonded Silicon Carbide Ceramics (in Korean)," J. Kor. Ceram. Soc., 45 [7] 430-37 (2008).
24. K. Y. Lim, Y.-W. Kim, S. K. Woo, and I. S. Han, "Effect of Aluminum Addition on Porosity and Flexural Strength of Porous Self-Bonded Silicon Carbide Ceramics (in Korean)," J. Kor. Ceram. Soc., 46 [5] 520-24 (2009).
25. G. P. Kennedy, K. Y. Lim, and Y.-W. Kim, "Effect of Additive Composition on Porosity and Flexural Strength of Porous Self-Bonded SiC Ceramics," J. Ceram. Soc. Japan, 118 [9] 810-13 (2010).
26. B. V. Manoj Kumar, K. Y. Lim, and Y.-W. Kim, "Influence of Submicron SiC Particle Addition on Porosity and Flexural Strength of Porous Self-Bonded Silicon Carbide" Met. Mater. Int., 17 [3] 435-40 (2011).
27. J. H. Eom and Y.-W. Kim, "Low-Temperature Processing of Silicon Oxycarbide-Bonded Silicon Carbide," J. Am. Ceram. Soc., 93 [9] 2463-66 (2010).
28. Y.-W. Kim, M. Mitomo, H. Emoto, J. G. Lee, "Effect of Initial α-Phase Content on Microstructure and Mechanical Properties of Sintered Silicon Carbide," J. Am. Ceram. Soc., 81 [12] 3136-40 (1998). (Pubitemid 128594826)
29. S. H. Chae, Y.-W. Kim, I. H. Song, H. D. Kim, and J. S. Bae, "Effects of Template Size and Content on Porosity and Strength of Macroporous Zirconia Ceramics (in Korean)," J. Kor. Ceram. Soc., 46 [1] 35-40 (2009).
30. E. J. Lee, I. H. Song, H. D. Kim, Y.-W. Kim, and J. S. Bae, "Investigation on the Pore Properties of the Microcellular ZrO2 Ceramics Using Hollow Microsphere (in Korean)," J. Kor. Ceram. Soc., 46 [1] 108-15 (2009).
31. K. Y. Lim, Y.-W. Kim, I. H. Song, H. D. Kim, and J. S. Bae, "Effect of Frit Content on Microstructure and Flexural Strength of Porous Frit-Bonded Al2O3 Ceramics (in Korean)," J. Kor. Ceram. Soc., 47 [6] 529-33 (2010).
32. J. H. Eom, Y.-W. Kim, I. H. Song, and H. D. Kim, "Processing and Properties of Polysiloxane-Derived Porous Silicon Carbide Ceramics Using Hollow Microspheres as Templates," J. Euro. Ceram. Soc., 28 1029-35 (2008).
33. P. K. Lin and D. S. Tsai, "Preparation and Analysis of a Silicon Carbide Composite Membrane,"J. Am. Ceram. Soc., 80 [2] 365-72 (1997).
34. J. H. Eom, Y.-W. Kim, I. H. Song, and H. D. Kim, "Microstructure and Properties of Porous Silicon Carbide Ceramics Fabricated by Carbothermal Reduction and Subsequent Sintering Process," Mater. Sci. Eng. A, 464 129-34 (2007). (Pubitemid 46760332)
35. H. Ye, V. V. Pujar, and N. P. Padture, "Coarsening in Liquid-Phase-Sintered α-SiC," Acta Mater., 47 [2] 481-87 (1999).
36. Y.-W. Kim, M. Mitomo, and G. D. Zhan, "Mechanism of Grain Growth in Liquid-Phase-Sintered α-SiC," J. Mater. Res., 14 [11] 4291-93 (1999). (Pubitemid 32083311)
37. S. G. Lee, Y.-W. Kim, and M. Mitomo, "Relationship between Microstructure and Fracture Toughness of Toughened Silicon Carbide Ceramics," J. Am. Ceram. Soc., 84 [6] 1347-53 (2001). (Pubitemid 33669950)
38. J. H. Eom, Y.-W. Kim, and M. Narisawa, "Microstructural Development of Macroporous Silicon Carbide Ceramics during Annealing," J. Ceram. Proc. Res., 9 [2] 176-79 (2008).
39. J. H. Eom and Y.-W. Kim, "Effect of Template Size on Microstructure and Strength of Porous Silicon Carbide Ceramics," J. Ceram. Soc. Jpn, 116 [10] 1159-63 (2008).
40. J. H. Eom and Y.-W. Kim, "Effect of Additive Composition on Microstructure and Strength of Porous Silicon Carbide Ceramics," J. Mater. Sci., 44 4482-86 (2009).