Effect of particle size on the electrophoretic deposition of hydroxyapatite coatings: A kinetic study based on a statistical analysis

International Journal of Applied Ceramic Technology

Volumn 10, Issue 1, 2013, Pages 87-96

  Farnoush, Hamidreza ^a   Mohandesi, Jamshid Aghazadeh ^a   Fatmehsari, Davoud Haghshenas ^a  

^a AMIRKABIR UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

[No Author keywords available]

Indexed keywords

CENTRAL COMPOSITE DESIGNS; DC VOLTAGE; DEPOSITION KINETICS; ELECTROPHORETIC DEPOSITIONS; ETHANOL-BASED SUSPENSIONS; HA COATING; HYDROXYAPATITE COATING; KINETIC STUDY; NANO-SIZED HYDROXYAPATITE; RESPONSE SURFACE METHODOLOGY; SUBMICROMETERS; ZETA POTENTIAL MEASUREMENTS;

COATINGS; COMPOSITE COATINGS; DESIGN OF EXPERIMENTS; ELECTROPHORESIS; ETHANOL; HYDROXYAPATITE; KINETICS; PARTICLE SIZE; PARTICLE SIZE ANALYSIS; SUSPENSIONS (FLUIDS); ZETA POTENTIAL;

DEPOSITION;

EID: 84872009375     PISSN: 1546542X     EISSN: 17447402     Source Type: Journal    
DOI: 10.1111/j.1744-7402.2012.02818.x     Document Type: Article

References (46)

1. S. R. Paital, and, N. B. Dahotre, " Calcium phosphate coatings for bio-implant applications: Materials, performance factors, and methodologies," Mater. Sci. Eng., R, 66 [ 1-3 ] 1-70 (2009).
2. H. Farnoush, J. A. Mohandesi, D. H. Fatmehsari, and, F. Moztarzadeh, " Modification of Electrophoretically Deposited Nano-Hydroxyapatite Coatings by Wire Brushing on Ti-6Al-4V Substrates," Ceram. Int., 38 [6] 4885-4893 (2012).
3. F. Gervaso, F. Scalera, S. Kunjalukkal Padmanabhan, A. Sannino, and, A. Licciulli, " High-Performance Hydroxyapatite Scaffolds for Bone Tissue Engineering Applications," Int. J. Appl. Ceram. Technol., 9 [ 3 ] 507-516 (2012). doi: 10.1111/j.1744-7402.2011.02662.x
4. 2 Electrospun Nanofiber Consolidated Using High-Frequency Induction Heating," Int. J. Appl. Ceram. Technol., 8 [ 3 ] 523-531 (2011).
5. M. M. Sebdani, and, M. H. Fathi, " Fabrication and Characterization of Hydroxyapatite-Forsterite-Bioactive Glass Composite Nanopowder for Biomedical Applications," Int. J. Appl. Ceram. Technol., 8 [ 3 ] 553-559 (2011).
6. Y. Bai, I. S. Park, H. H. Park, T. S. Bae, and, M. H. Lee, " Formation of Bioceramic Coatings Containing Hydroxyapatite on the Titanium Substrate by Micro-Arc Oxidation Coupled with Electrophoretic Deposition," J. Biomed. Mater. Res. B, 95B [ 2 ] 365-373 (2010).
7. Z. Károly, C. Bartha, I. Mohai, C. Balázsi, I. E. Sajõ, and, J. Szépvölgyi, " Deposition of Silicon Carbide and Nitride-Based Coatings by Atmospheric Plasma Spraying," Int. J. Appl. Ceram. Technol., doi: 10.1111/j.1744-7402.2011.02748.x (2012).
8. E. Sánchez, et al,. " Characterization of Nanostructured Ceramic and Cermet Coatings Deposited by Plasma Spraying," Int. J. Appl. Ceram. Technol., 8 [ 5 ] 1136-1146 (2011).
9. S. K. Mishra, " Nano and Nanocomposite Superhard Coatings of Silicon Carbonitride and Titanium Diboride by Magnetron Sputtering," Int. J. Appl. Ceram. Technol., 6 [ 3 ] 345-354 (2009).
10. V. Nazabal, et al,. " Sputtering and Pulsed Laser Deposition for Near- and Mid-Infrared Applications: A Comparative Study of Ge25Sb10S65 and Ge25Sb10Se65 Amorphous Thin Films," Int. J. Appl. Ceram. Technol., 8 [ 5 ] 990-1000 (2011).
11. H. Aguiar, J. Serra, and, P. González, " Nanostructural Transitions in Bioactive Sol-Gel Silicate Glasses," Int. J. Appl. Ceram. Technol., 8 [ 3 ] 511-522 (2011).
12. S. Tanaka, and, S. Fujihara, " Design and Fabrication of Luminescent Antireflective Sol-Gel Coatings with a Bi-Layer Structure," Int. J. Appl. Ceram. Technol., 8 [ 5 ] 1001-1009 (2011).
13. R. S. Faeda, R. Spin-Neto, E. Marcantonio, and, A. C. Guastaldi, " Laser Ablation in Titanium Implants Followed by Biomimetic Hydroxyapatite Coating: Histomorphometric Study in Rabbits," Microsc. Res. Techn., doi: 10.1002/jemt.22018 (2012).
14. M. Iafisco, J. G. Morales, M. A. Hernández-Hernández, J. M. García-Ruiz, and, N. Roveri, " Biomimetic Carbonate-Hydroxyapatite Nanocrystals Prepared by Vapor Diffusion," Adv. Eng. Mater., 12 [ 7 ] B218-B223 (2010).
15. K. Wu, and, I. Zhitomirsky, " Electrophoretic Deposition of Ceramic Nanoparticles," Int. J. Appl. Ceram. Technol., 8 [ 4 ] 920-927 (2011).
16. S. Salman, et al,. " Sintering Effect on Mechanical Properties of Composites of Natural Hydroxyapatites and Titanium," Ceram. Int., 35 [ 7 ] 2965-2971 (2009).
17. O. Albayrak, O. El-Atwani, and, S. Altintas, " Hydroxyapatite Coating on Titanium Substrate by Electrophoretic Deposition Method: Effects of Titanium Dioxide Inner Layer on Adhesion Strength and Hydroxyapatite Decomposition," Surf. Coat. Technol., 202 [ 11 ] 2482-2487 (2008).
18. P. C. Rath, L. Besra, B. P. Singh, and, S. Bhattacharjee, " Titania/Hydroxyapatite Bi-Layer Coating on Ti Metal by Electrophoretic Deposition: Characterization and Corrosion Studies," Ceram. Inter., 38 [ 4 ] 3209-3216 (2012).
19. M. We, A. J. Ruys, M. V. Swain, B. K. Milthorpe, and, C. C. Sorrell, " Hydroxyapatite-Coated Metals: Interfacial Reactions During Sintering," J. Mater. Sci. -Mater. Med., 16 [ 2 ] 101-106 (2005).
20. S. V. Dorozhkin, " Nanosized and Nanocrystalline Calcium Orthophosphates," Acta Biomater., 6 [ 3 ] 715-734 (2010).
21. I. P. Shapiro, H. Xu, P. Xiao, R. Jones, and, D. S. Rickerby, " An Investigation of Process Parameters for Electrophoretic Deposition of Yttria-Stabilized Zirconia Using Design of Experiments," Int. J. Appl. Ceram. Technol., 8 [ 6 ] 1320-1333 (2011).
22. K.-T. Lau, and, C. C. Sorrell, " Electrophoretic Mobilities of Dissolved Polyelectrolyte Charging Agent and Suspended Non-Colloidal Titanium During Electrophoretic Deposition," Mater. Sci. Eng. B, 176 [ 5 ] 369-381 (2011).
23. S. Radice, C. R. Bradbury, J. Michler, and, S. Mischler, " Critical Particle Concentration in Electrophoretic Deposition," J. Eur. Ceram. Soc., 30 [ 5 ] 1079-1088 (2010).
24. M. Mishra, S. Bhattacharjee, L. Besra, H. S. Sharma, T. Uchikoshi, and, Y. Sakka, " Effect of pH Localization on Microstructure Evolution of Deposits During Aqueous Electrophoretic Deposition (EPD)," J. Eur. Ceram. Soc., 30 [ 12 ] 2467-2473 (2010).
25. G. Mohanty, L. Besra, S. Bhattacharjee, and, B. P. Singh, " Optimization of Electrophoretic Deposition of Alumina onto Steel Substrates from its Suspension in Iso-Propanol Using Statistical Design of Experiments," Mater. Res. Bull., 43 [ 7 ] 1814-1828 (2008).
26. Y. Hara, J. R. S. Brownson, and, M. A. Anderson, " Fabrication of Thin-Films Composed of ZnO Nanorods Using Electrophoretic Deposition," Int. J. Appl. Ceram. Technol., 9 [ 1 ] 115-123 (2012).
27. H. C. Hamaker, " Formation of a Deposit by Electrophoresis," Trans. Faraday Soc., 35, 279-287 (1940).
28. Z. Zhang, Y. Huang, and, Z. Jiang, " Electrophoretic Deposition Forming of SiC-TZP Composites in a Nonaqueous Sol Media," J. Am. Ceram. Soc., 77 [ 7 ] 1946-1949 (1994).
29. 2 Suspensions," J. Colloid Interface Sci., 347 [ 1 ] 102-111 (2010).
30. H. Farnoush, D. H. Fatmehsari, and, A. Ekrami, " The Effect of Pre-Straining at Intermediate Temperatures on the Mechanical Behavior of High-Bainite Dual Phase (HBDP) Steels," Mater. Sci. Eng., A, 543 224-230 (2012).
31. H. Farnoush, D. Haghshenas Fatmehsari, J. Aghazadeh Mohandesi, and, H. Abdoli, " Evaluation of Strengthening Behavior of Al-AlN Nanostructured Composite by the Use of Modified Heckel Model and Response Surface Methodology," J.Alloys Compd, 517 [ 0 ] 45-53 (2012).
32. D. F. Haghshenas, B. Bonakdarpour, E. K. Alamdari, and, B. Nasernejad, " Optimization of Physicochemical Parameters for Bioleaching of Sphalerite by Acidithiobacillus Ferrooxidans Using Shaking Bioreactors," Hydrometallurgy, 111-112 [ 0 ] 22-28 (2012).
33. C. Compson, M. Liu, L. Besra, and, D. Earl, " Modeling Electrophoretic Deposition on Porous Non-Conducting Substrates Using Statistical Design of Experiments," J. Am. Ceram. Soc., 89 [ 9 ] 2787-2795 (2006).
34. ® Composite Coatings for Orthopaedic Applications," Surf. Coat. Technol., 205 [ 23-24 ] 5260-5268 (2011).
35. ® Suspensions Using the Taguchi Experimental Design Approach," J. Eur. Ceram. Soc., 30 [ 14 ] 2963-2970 (2010).
36. D. C. Montgomery, Design and Analysis of Experiments, John Wiley & Sons, New York, 2006.
37. B. D. Cullity, Elements of X-ray Diffraction, Addison-Wesley Publishing, Boston, 1977.
38. R. Xu, " Progress in Nanoparticles Characterization: Sizing and Zeta Potential Measurement," Particuology, 6 [ 2 ] 112-115 (2008).
39. K. Konig, S. A. Novak, A. R. Boccaccini, and, S. Kobe, " The Effect of the Particle Size and the Morphology of Alumina Powders on the Processing of Green Bodies by Electrophoretic Deposition," J. Mater. Proc. Technol., 210 [ 1 ] 96-103 (2010).
40. R. S. Hyam, K. M. Subhedar, and, S. H. Pawar, " Suspension Stability Studies for the Electrophoretic Deposition of Boron Films," Colloids Surf. A, 297 [ 1-3 ] 172-178 (2007).
41. A. G. Bhosale, R. Joshi, K. M. Subhedar, R. Mishra, and, S. H. Pawar, " Acetone Mediated Electrophoretic Deposition of Nanocrystalline SDC on NiO-SDC Ceramics," J. Alloys Compd., 503 [ 1 ] 266-271 (2010).
42. H. Abdoli, M. Zarabian, P. Alizadeh, and, S. K. Sadrnezhaad, " Fabrication of Aluminum Nitride Coatings by Electrophoretic Deposition: Effect of Particle Size on Deposition and Drying Behavior," Ceram. Int., 37 [ 1 ] 313-319 (2011).
43. S. Jailani, G. V. Franks, and, T. W. Healy, " ζ Potential of Nanoparticle Suspensions: Effect of Electrolyte Concentration, Particle Size, and Volume Fraction," J. Am. Ceram. Soc., 91 [ 4 ] 1141-1147 (2008).
44. J. Chen, H. Fan, X. Chen, P. Fang, C. Yang, and, S. Qiu, " Fabrication of Pyrochlore-Free PMN-PT Thick Films by Electrophoretic Deposition," J. Alloys Compd., 471 [ 1-2 ] L51-L53 (2009).
45. B. A. Ferrari, and, R. Moreno, " EPD Kinetics: A Review," J. Eur. Ceram. Soc., 30 [ 5 ] 1069-1078 (2010).
46. S.-J. Ciou, K.-Z. Fung, and, K.-W. Chiang, " The Mathematical Expression for Kinetics of Electrophoretic Deposition and the Effects of Applied Voltage," J. Power Sources, 172 [ 1 ] 358-362 (2007).