Modification of electrophoretically deposited nano-hydroxyapatite coatings by wire brushing on Ti-6Al-4V substrates

Ceramics International

Volumn 38, Issue 6, 2012, Pages 4885-4893

  Farnoush, Hamidreza ^a   Aghazadeh Mohandesi, Jamshid ^a   Haghshenas Fatmehsari, Davoud ^a   Moztarzadeh, Fathollah ^a  

^a AMIRKABIR UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

A. Powders: chemical preparation; B. Surfaces; C. Strength; D. Apatite; E. Biomedical applications; Electrophoretic deposition

Indexed keywords

ADHESION TEST; AFM; BIOMEDICAL APPLICATIONS; BONDING STRENGTH; C. STRENGTH; CHEMICAL PRECIPITATION METHOD; CONSTANT VOLTAGE; ELECTROPHORETIC DEPOSITIONS; MICROHARDNESS PROFILES; NANO-HA; NANO-HYDROXYAPATITE; POTENTIODYNAMIC POLARIZATION MEASUREMENTS; POWDERS: CHEMICAL PREPARATIONS; ROTATIONAL SPEED; ROUGHNESS OF SURFACE; TI-6AL-4V; XRD;

ALUMINUM; COATINGS; CORROSION RESISTANCE; DEPOSITION; ELECTROPHORESIS; MEDICAL APPLICATIONS; NANOCOMPOSITES; PHOSPHATE MINERALS; POWDERS; PRECIPITATION (CHEMICAL); TITANIUM ALLOYS; WIRE;

SUBSTRATES;

EID: 84861338923     PISSN: 02728842     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ceramint.2012.02.079     Document Type: Article

References (40)

1. M. Geetha, A.K. Singh, R. Asokamani, and A.K. Gogia Ti based biomaterials, the ultimate choice for orthopaedic implants-A review Prog. Mater. Sci. 54 2009 397 425
2. S.R. Paital, and N.B. Dahotre Calcium phosphate coatings for bio-implant applications: materials, performance factors, and methodologies Mater. Sci. Eng. R 66 2009 1 70
3. S. Sathish, M. Geetha, S.T. Aruna, N. Balaji, K.S. Rajam, and R. Asokamani Studies on plasma sprayed bi-layered ceramic coating on bio-medical Ti-13Nb-13Zr alloy Ceram. Int. 37 2011 1333 1339
4. A. Dey, S.K. Nandi, B. Kundu, C. Kumar, P. Mukherjee, S. Roy, A.K. Mukhopadhyay, M.K. Sinha, and D. Basu Evaluation of hydroxyapatite and β-tri calcium phosphate microplasma spray coated pin intra-medullary for bone repair in a rabbit model Ceram. Int. 37 2011 1377 1391
5. I. Sopyan, S. Ramesh, N.A. Nawawi, A. Tampieri, and S. Sprio Effects of manganese doping on properties of sol-gel derived biphasic calcium phosphate ceramics Ceram. Int. 37 2011 3703 3715
6. A. Yelten, S. Yilmaz, and F.N. Oktar Sol-gel derived alumina- hydroxyapatite-tricalcium phosphate porous composite powders Ceram. Int. 2011 10.1016/j.ceramint.2011.11.032
7. H. Li, Z. Guo, B. Xue, Y. Zhang, and W. Huang Collagen modulating crystallization of apatite in a biomimetic gel system Ceram. Int. 37 2011 2305 2310
8. 2-based coatings containing P with a graded structure Ceram. Int. 35 2009 2343 2350
9. T.R. Rautray, R. Narayanan, and K.H. Kim Ion implantation of titanium based biomaterials Prog. Mater. Sci. 56 2011 1137 1177
10. C. Kaya Electrophoretic deposition of carbon nanotube-reinforced hydroxyapatite bioactive layers on Ti-6Al-4V alloys for biomedical applications Ceram. Int. 34 2008 1843 1847
11. S. Subramanian, D. MubarakAli, and N. Thajuddin Fabrication of corrosion resistant, bioactive and antibacterial silver substituted hydroxyapatite/titania composite coating on Cp Ti Ceram. Int. 38 2012 731 740
12. A.R. Boccaccini, S. Keim, R. Ma, Y. Li, and I. Zhitomirsky Electrophoretic deposition of biomaterials J. R. Soc. Interface 7 2010 S581 S613
13. S. Salman, O. Gunduz, S. Yilmaz, M.L. Öveçoglu, R.L. Snyder, S. Agathopoulos, and F.N. Oktar Sintering effect on mechanical properties of composites of natural hydroxyapatites and titanium Ceram. Int. 35 2009 2965 2971
14. D.Y. Lin, and X.X. Wang Preparation of hydroxyapatite coating on smooth implant surface by electrodeposition Ceram. Int. 37 2011 403 406
15. C. Soundrapandian, S. Bharati, D. Basu, and S. Datta Studies on novel bioactive glasses and bioactive glass-nano-Hap composites suitable for coating on metallic implants Ceram. Int. 37 2011 759 769
16. P.C. Rath, L. Besra, B.P. Singh, and S. Bhattacharjee Titania/hydroxyapatite bi-layer coating on Ti metal by electrophoretic deposition: characterization and corrosion studies Ceram. Int. 2012 10.1016/j.ceramint.2011.12.026
17. O. Albayrak, O.E. Atwani, and S. Altintas Hydroxyapatite coating on titanium substrate by electrophoretic deposition method: effects of titanium dioxide inner layer on adhesion strength and hydroxyapatite decomposition Surf. Coat. Technol. 202 2008 2482 2487
18. 2) on titanium alloy for biomedical applications Ceram. Int. 2012 10.1016/j.ceramint.2011.12.056
19. M. Wei, A.J. Ruys, M.V. Swain, B.K. Milthorpe, and C.C. Sorrell Hydroxyapatite-coated metals: interfacial reactions during sintering J. Mater. Sci. Mater. 16 2005 101 106
20. D. Jianxin, and L. Taichiu Surface integrity in electro-discharge machining, ultrasonic machining, and diamond saw cutting of ceramic composites Ceram. Int. 26 2000 825 830
21. S. Kumar, R. Singh, T.P. Singh, and B.L. Sethi Surface modification by electrical discharge machining: A review J. Mater. Process. Technol. 209 2009 3675 3687
22. B. Podgornik, and J. Jerina Surface topography effect on galling resistance of coated and uncoated tool steel Surf. Coat. Technol. 206 2012 2792 2800
23. A.M. Awad, E.A. Ghazy, S.A. Abo El-Enin, and M.G. Mahmoud Electropolishing of AISI-304 stainless steel for protection against SRB biofilm Surf. Coat. Technol. 2012 10.1016/j.surfcoat.2011.11.046
24. H. Carreon, S. Barriuso, G. Barrera, J.L. González-Carrasco, and F.G. Caballero Assessment of blasting induced effects on medical 316 LVM stainless steel by contacting and non-contacting thermoelectric power techniques Surf. Coat. Technol. 206 2012 2941 2946
25. L. O'Neill a, C. O'Sullivan, P. O'Hare, L. Sexton, F. Keady, and J. O'Donoghue Deposition of substituted apatites onto titanium surfaces using a novel blasting process Surf. Coat. Technol. 204 2009 484 488
26. L. Pazosa, P. Corengia, and H. Svoboda Effect of surface treatments on the fatigue life of titanium for biomedical applications J. Mech. Behav. Biomed. 3 2010 416 424
27. C. Leinenbach, and D. Eifler Fatigue and cyclic deformation behaviour of surface-modified titanium alloys in simulated physiological media Biomaterials 27 2006 1200 1208
28. M. Multigner, E. Frutos, C.L. Mera, J. Chao, and J.L. González-Carrasco Interrogations on the sub-surface strain hardening of grit blasted Ti-6Al-4V alloy Surf. Coat. Tech. 203 2009 2036 2040
29. C.Y. Zheng, F.L. Nie, Y.F. Zheng, Y. Cheng, S.C. Weic, and R.Z. Valiev Enhanced in vitro biocompatibility of ultrafine-grained titanium with hierarchical porous surface Appl. Surf. Sci. 257 2011 5634 5640
30. B.D. Hahna, D.S. Park, J.J. Choi, J. Ryu, W.H. Yoon, J.H. Choi, J.W. Kim, Y.L. Cho, C. Park, H.E. Kim, and S.G. Kim Preparation and in vitro characterization of aerosol-deposited hydroxyapatite coatings with different surface roughnesses Appl. Surf. Sci. 257 2011 7792 7799
31. P. O'Hare, B.J. Meenan, G.A. Burke, G. Byrne, D. Dowling, and J.A. Hunt Biological responses to hydroxyapatite surfaces deposited via a co-incident microblasting technique Biomaterials 31 2010 515 522
32. T. Kokubo Bioactive glass ceramics: properties and applications Biomaterials 12 1991 155 163
33. B.D. Cullity Elements of X-ray Diffraction second ed. 1977 Addison-Wesley Publishing
34. E. Landi, A. Tampieri, G. Celotti, and S. Sprio Densification behaviour and mechanisms of synthetic hydroxyapatites J. Eur. Ceram. Soc. 20 2000 2377 2387
35. P.N. Kumta, C. Sfeir, D.H. Lee, D. Olton, and D. Choi Nanostructured calcium phosphates for biomedical applications: novel synthesis and characterization Acta Biomater. 1 2005 65 83
36. R. Xu Progress in nanoparticles characterization: sizing and zeta potential measurement Particuology 6 2008 112 115
37. Z. Guo, A.P. Miodownik, N. Saunders, and J.P. Schillé Influence of stacking-fault energy on high temperature creep of alpha titanium alloys Scr. Mater. 54 2006 2175 2178
38. M. Hoseini, M.H. Pourian, F. Bridier, H. Vali, J.A. Szpunar, and P. Bocher Thermal stability and annealing behaviour of ultrafine grained commercially pure titanium Mater. Sci. Eng. A 532 2012 58 63
39. C.T. Kwok, P.K. Wong, F.T. Cheng, and H.C. Man Characterization and corrosion behavior of hydroxyapatite coatings on Ti6Al4V fabricated by electrophoretic deposition Appl. Surf. Sci. 255 2009 6736 6744
40. M. Stern, and A.L. Geary Electrochemical polarization: I. A theoretical analysis of the shape of polarization curves J. Electrochem. Soc. 104 1957 56 63