Effect of process parameters on the properties of selective laser sintered Poly(3-hydroxybutyrate) scaffolds for bone tissue engineering: This paper analyzes how laser scan spacing and powder layer thickness affect the morphology and mechanical properties of SLS-made scaffolds by using a volume energy density function

Virtual and Physical Prototyping

Volumn 7, Issue 4, 2012, Pages 275-285

  Pereira, T F ^a   Silva, M A C ^a   Oliveira, M F ^b   Maia, I A ^b   Silva, J V L ^b   Costa, M F ^a   Thire R M S M ^a  

^a FEDERAL UNIVERSITY OF RIO DE JANEIRO   (Brazil)

^b Centro de Tecnologia da Informacao Renato Archer   (Brazil)

Author keywords

bone regeneration; mechanical properties; process parameters; scaffolds; selective laser sintering

Indexed keywords

BONE REGENERATION; BONE TISSUE ENGINEERING; BONE TISSUE REGENERATION; DIGITAL MODEL; DIMENSIONAL DEVIATION; HUMAN TRABECULAR BONE; LASER SCANS; MICROPORES; MORPHOLOGY AND MECHANICAL PROPERTIES; POLY-3-HYDROXYBUTYRATE; POROUS SCAFFOLD; POWDER LAYER; PROCESS PARAMETERS; SCAN SPACING; SELECTIVE LASER SINTERING; TEMPORARY SUBSTRATES; VOLUME ENERGY DENSITY;

BONE; LASER HEATING; MECHANICAL PROPERTIES; MORPHOLOGY; SCAFFOLDS; SINTERING; SURFACE PROPERTIES; TISSUE;

SCAFFOLDS (BIOLOGY);

EID: 84870503249     PISSN: 17452759     EISSN: 17452767     Source Type: Journal    
DOI: 10.1080/17452759.2012.738551     Document Type: Article

References (36)

1. Atala, A. 2012. Regenerative medicine strategies. Journal of Pediatric Surgery, 47: 17-28.
2. Beal, V.E. 2009. Statistical evaluation of laser energy density effect on mechanical properties of polyamide parts manufactured by selective laser sintering. Journal of Applied Polymer Science, 113: 2910-2919.
3. Budyanto, L., Goh, Y.Q., and Ooi, C.P. 2009. Fabrication of porous poly(L-lactide) (PLLA) scaffolds for tissue engineering using liquid-liquid phase separation and freeze extraction. Journal of Materials Science: Materials in Medicine, 20(1): 105-111.
4. Chang, B.-S. 2000. Osteoconduction at porous hydroxyapatite with various pore configurations. Biomaterials, 21(12): 1291-1298.
5. Chen, G-Q. and Wu, Q. 2005. The application of polyhydroxyalkanoates as tissue engineering materials. Biomaterials, 26(33): 6565-6578.
6. Cooper, K.G. 2001. Rapid prototyping technology selection and application, New York: Marcel Dekker.
7. Duan, B., Cheung, W.L., and Wang, M. 2011. Optimized fabrication of Ca-P/PHBV nanocomposite scaffolds via selective laser sintering for bone tissue engineering. Biofabrication, 3(1): 1-13.
8. Duan, B. and Wang, M. 2010. Customized Ca-P/PHBV nanocomposite scaffolds for bone tissue engineering: Design, fabrication, surface modification and sustained release of growth factor. Journal of the Royal Society Interface, 18(5): 1-15.
9. Fisher, J.P. 2002. Soft and hard tissue response to photocrosslinked poly(propylene fumarate) scaffolds in a rabbit model. Journal of Biomedical Materials Research, 59(3): 547-556.
10. Goulet, R.W., et al., 1994. The relationship between the structural and orthogonal compressive properties of trabecular bone. Journal of Biomechanics, 27 4, 375-377, 379-389.
11. Ho, H.C.H., Cheung, W.L., and Gibson, I. 2003. Morphology and properties of selective laser sintered bisphenol A polycarbonate. Industrial & Engineering Chemistry Research, 42(9): 1850-1862.
12. Hollister, S.J. 2005. Engineering craniofacial scaffolds. Orthodontics & Craniofacial Research, 8(3): 162-173.
13. Kramschuster, A. and Turng, L.-S. 2010. An injection molding process for manufacturing highly porous and interconnected biodegradable polymer matrices for use as tissue engineering scaffolds. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 92B(2): 66-376.
14. Kruth, J.-P. 2007. Consolidation phenomena in laser and powder-bed based layered manufacturing. Annals of the CIRP, 56(2): 730-759.
15. Leong, K.F., Cheah, C.M., and Chua, C.K. 2003. Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs. Biomaterials, 24(13): 2363-2378.
16. Löber, M. 2002. Biomaterial implants induce the inflammation marker CRP at the site of implantation. Journal of Biomedical Materials Research, 61(1): 165-167.
17. Lu, H. 2011. Autologous extracellular matrix scaffolds for tissue engineering. Biomaterials, 32(10): 2489-2499.
18. Luo, Y. 2007. "Three-dimensional scaffolds". In Principles of tissue engineering, Edited by: Lanza, R., Langer, R. and Vacanti, J. 359-373. Oxford: Elsevier.
19. Mendonça, R.H. 2009. Adsorção de Fibronectina a Arcabouços de Polihidroxibutirato Aplicáveis à Engenharia Óssea. Polímeros: Ciência e Tecnologia, 19(2): 143-148.
20. Misra, S.K. 2006. Polyhydroxyalkanoate (PHA)/inorganic phase composites for tissue engineering applications. Biomacromolecules, 7(8): 2249-2258.
21. Nelson, J.C. 1995. Selective laser sintering of polymer-coated silicon carbide powders. Industrial & Engineering Chemistry Research, 34(5): 1641-1651.
22. Partee, B., Hollister, S.J., and Das, S. 2006. Selective laser sintering process optimization for layered manufacturing of CAPA® 6501 polycaprolactone bone tissue engineering scaffolds. Journal of Manufacturing Science and Engineering, 128(2): 531-540.
23. Pereira, T.F., et al., 2012. 3D printing of Poly(3-hydroxybutyrate) porous structures using selective laser sintering. Macromolecular Symposia, In Press.
24. Puppi, D. 2010. Polymeric materials for bone and cartilage repair. Progress in Polymer Science, 35(4): 403-440.
25. Roy, D.T. 2003. Performance of degradable composite bone repair products made via three-dimensional fabrication techniques. Journal of Biomedical Materials Research Part A, 66A(2): 283-291.
26. Senthilkumaran, K., Pandey, P.M., and Rao, P.M.V. 2009. Influence of building strategies on the accuracy of parts in selective laser sintering. Material & Design, 30(8): 2946-2954.
27. Starr, T.L., Gornet, T.F., and Usher, J.F. 2011. The effect of process conditions on mechanical properties of laser-sintered nylon. Rapid Prototyping Journal, 17(6): 418-423.
28. Tan, K.H. 2003. Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends. Biomaterials, 24(18): 3115-3123.
29. Tripathi, G. and Basu, B. 2012. A porous hydroxyapatite scaffold for bone tissue engineering: Physico-mechanical and biological evaluations. Ceramics International, 38(1): 341-349.
30. Williams, J.M. 2005. Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. Biomaterials, 26(23): 4817-4827.
31. Wiria, F.E. 2008. Improved biocomposite development of poly(vinyl alcohol) and hydroxyapatite for tissue engineering scaffold fabrication using selective laser sintering. Journal of Materials Science: Materials in Medicine, 19(3): 989-996.
32. Wiria, F.E., Leong, K.F., and Chua, C.K. 2010. Modeling of powder particle heat transfer process in selective laser sintering for fabricating tissue engineering scaffolds. Rapid Prototyping Journal, 16(6): 400-410.
33. Xu, S. 2007. Fabrication of a calcium phosphate scaffold with a three dimensional channel network and its application to perfusion culture of stem cells. Rapid Prototyping Journal, 13(2): 99-106.
34. Zhang, Y. 2009. In vitro biocompatibility of hydroxyapatite-reinforced polymeric composites manufactured by selective laser sintering. Journal of Biomedical Materials Research Part A, 91A(4): 1018-1027.
35. Zhou, W.Y. 2008. Selective laser sintering of porous tissue engineering scaffolds from poly(L-lactide)/carbonated hydroxyapatite nanocomposite microspheres. Journal of Materials Science: Materials in Medicine, 19(7): 2535-2540.
36. Zhou, W.Y. 2010. "Selective laser sintering of Poly(L-Lactide)/carbonated hydroxyapatite nanocomposite porous scaffolds for bone tissue engineering". In Tissue engineering, Edited by: Ederli, D. 179-204. Vukovar, Croatia: IN-TECH.