Modeling of powder particle heat transfer process in selective laser sintering for fabricating tissue engineering scaffolds

Rapid Prototyping Journal

Volumn 16, Issue 6, 2010, Pages 400-410

  Edith Wiria, Florencia ^a   Fai Leong, Kah ^a   Kai Chua, Chee ^a  

^a SINGAPORE INSTITUTE OF MANUFACTURING TECHNOLOGY   (Singapore)

Author keywords

Biotechnology; Heat transfer; Powders; Rapid prototypes; Sintering

Indexed keywords

3D SCAFFOLDS; ABSORPTION COEFFICIENTS; BEAM PROPERTIES; BIO-COMPOSITES; BIOMEDICAL APPLICATIONS; DESIGN/METHODOLOGY/APPROACH; ENGINEERING CHALLENGES; ENGINEERING EXPERTISE; FUNCTIONAL TISSUE; GOOD STABILITY; HEAT SOURCES; HEAT TRANSFER PROCESS; LASER POWER; MACHINE PARAMETERS; MATERIAL PROPERTY; POLYMERIC MATERIAL; POWDER BED; POWDER PARTICLES; RAPID PROTOTYPE; SELECTIVE LASER SINTERING; SINTERING CONDITION; SINTERING PROCESS; SURFACE REFLECTIVITY; THEORETICAL MODELING; THEORETICAL STUDY; TISSUE ENGINEERING SCAFFOLD; TRANSFER PHENOMENON; TRANSPLANTED CELLS; VERSATILE METHODS;

BIOCERAMICS; BIOMOLECULES; BIOPOLYMERS; BIOTECHNOLOGY; CONCURRENT ENGINEERING; HEAT TRANSFER COEFFICIENTS; JOB ANALYSIS; LASER BEAMS; LASER HEATING; POWDERS; RAPID PROTOTYPING; SCAFFOLDS; TISSUE; TISSUE ENGINEERING;

SINTERING;

EID: 78449250607     PISSN: 13552546     EISSN: None     Source Type: Journal    
DOI: 10.1108/13552541011083317     Document Type: Article

References (46)

1. Aleyamma, A.J. and Sharma, C.P. (1991), “Polyvinyl alcohol as a biomaterial”, in Ed. Szycher, M. and Ed. Sharma, C.P. (Eds), Blood Compatible Materials and Devices, Technomic, Lancaster, pp. 123-132.
2. Bartolo, P.J., Chua, C.K., Almeida, H.A., Chou, S.M. and Lim, A.S.C. (2009), “Biomanufacturing for tissue engineering: present and future trends”, Virtual and Physical Prototyping, Vol. 4 No. 4, pp. 203-216.
3. Bourke, S.L., Al-Khalili, M., Briggs, T., Michniak, B.B., Kohn, J. and Poole-Warren, L.A. (2003), “A photo-crosslinked poly(vinyl alcohol) hydrogel growth factor release vehicle for wound healing applications”, AAPS Pharm. Sci., Vol. 5 No. 4.
4. Carslaw, H.S. and Jaeger, J.C. (1959), Conduction of Heat in Solids, 2nd ed., Oxford University Press, New York, NY.
5. Cheah, C.M., Chua, C.K., Leong, K.F., Cheong, C.H. and Naing, M.W. (2004), “Automatic algorithm for generating complex polyhedral scaffold structures for tissue engineering”, Tissue Engineering, Vol. 10 Nos 3-4, pp. 595-610.
6. Chua, C.K., Leong, K.F. and Lim, C.S. (2010), Rapid Prototyping: Principles and Applications, 3rd ed., World Scientific, Singapore.
7. Chua, C.K., Leong, K.F., Cheah, C.M. and Chua, S.W. (2003 a), “Development of a tissue engineering scaffold structure library for rapid prototyping. Part 1: investigation and classification”, International Journal of Advanced Manufacturing Technology, Vol. 21 No. 4, pp. 291-301.
8. Chua, C.K., Leong, K.F., Cheah, C.M. and Chua, S.W. (2003 b), “Development of a tissue engineering scaffold structure library for rapid prototyping. Part 2: parametric library and assembly program”, International Journal of Advanced Manufacturing Technology, Vol. 21 No. 4, pp. 302-312.
9. Chua, C.K., Leong, K.F., Tan, K.H., Wiria, F.E. and Cheah, C.M. (2004), “Development of tissue scaffolds using selective laser sintering of polyvinyl alcohol/hydroxyapatite biocomposite for craniofacial and joint defects”, Journal of Materials Science: Materials in Medicine, Vol. 15 No. 10, pp. 1113-21.
10. Flanagan, T.C. and Pandit, A. (2003), “Living artificial heart valve alternatives: a review”, European Cells and Materials, Vol. 6, pp. 28-45.
11. Gibson, I. and Shi, D. (1997), “Material properties and fabrication parameters in selective laser sintering process”, Rapid Prototyping Journal, Vol. 3 No. 4, pp. 129-136.
12. Griffith, L.G. and Naughton, G. (2002), “Tissue engineering – current challenges and expanding opportunities”, Science, Vol. 295 No. 5557, pp. 1009-14.
13. Hassan, C.M. and Peppas, N.A. (2000), “Structure and applications of poly(vinyl alcohol) hydrogels produced by conventional crosslinking or by freezing/thawing methods”, Biopolymers, PVA Hydrogels, Anionic Polymerisation Nanocomposites, Vol. 153, Springer, Berlin, pp. 37-65.
14. Holland, B.J. and Hay, J.N. (2001), “The thermal degradation of poly(vinyl alcohol)”, Polymer, Vol. 42 No. 16, pp. 6775-83.
15. Hutmacher, D.W. (2000), “Scaffolds in tissue engineering bone and cartilage”, Biomaterials, Vol. 21, pp. 2529-43.
16. Incropera, F.P. and De Witt, D.P. (1996), Fundamentals of Heat and Mass Transfer, 4th ed., Wiley, New York, NY.
17. Jansen, E.J.P., Sladek, R.E.J., Bahar, H., Yaffe, A., Gijbels, M.J., Kuijer, R., Bulstra, S.K., Guldemond, N.A., Binderman, I. and Koole, L.H. (2005), “Hydrophobicity as a design criterion for polymer scaffolds in bone tissue engineering”, Biomaterials, Vol. 26, pp. 4423-31.
18. Jones, S.A., Brown, M. and Martin, G.P. (2004), “Determination of polyvinyl alcohol using gel filtration liquid chromatography”, Chromatographia, Vol. 59 No. 1, pp. 43-46.
19. Kishida, A. and Ikada, Y. (2002), “Hydrogels for biomedical and pharmaceutical applications”, in Ed. Dumitriu, S. (Ed.), Polymeric Biomaterials, 2nd ed., Marcel Dekker, New York, NY, pp. 133-147.
20. Kruth, J.P., Wang, X., Laoui, T. and Froyen, L. (2003), “Lasers and materials in selective laser sintering”, Assembly Automation, Vol. 23 No. 4, p. 357.
21. Kruth, J.P., Mercelis, P., Vaerenbergh, J.V., Froyen, L. and Rombouts, M. (2005), “Binding mechanisms in selective laser sintering and selective laser melting”, Rapid Prototyping Journal, Vol. 11, pp. 26-36.
22. Langer, R. and Vacanti, J.P. (1993), “Tissue engineering”, Science, Vol. 260, pp. 920-6.
23. Lee, C.T., Kung, P.H. and Lee, Y.D. (2005), “Preparation of poly(vinyl alcohol)-chondroitin sulfate hydrogel as matrices in tissue engineering”, Carbohydrate Polymers, Vol. 61 No. 3, pp. 348-354.
24. Leong, K.F., Cheah, C.M. and Chua, C.K. (2003), “Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs”, Biomaterials, Vol. 24 No. 13, pp. 2363-78.
25. Lysaght, M.J. and Hazlehurst, A.L. (2004), “Tissue engineering: the end of the beginning”, Tissue Engineering, Vol. 10 Nos 1-2, pp. 309-320.
26. Lysaght, M.J. and Reyes, J. (2001), “The growth of tissue engineering”, Tissue Engineering, Vol. 7 No. 5, pp. 485-493.
27. Ma, L. and Bin, H. (2007), “Temperature and stress analysis and simulation in fractal scanning-based laser sintering”, International Journal of Manufacturing Technology, Vol. 34 Nos 9-10, pp. 898-903.
28. Marler, J.J., Upton, J., Langer, R. and Vacanti, J.P. (1998), “Transplantation of cells in matrices for tissue regeneration”, Advanced Drug Delivery Reviews, Vol. 33 Nos 1-2, pp. 165-182.
29. Meeten, G.H. (1986), “Refraction and extinction of polymers”, in Ed. Meeten, G.H. (Ed.), Optical Properties of Polymers, Elsevier, London, pp. 1-62.
30. Nelson, J.C., Xue, S., Barlow, J.W., Beaman, J.J., Marcus, H.L. and Bourell, D.L. (1993), “Model of the selective laser sintering of bisphenol-A polycarbonate”, Industrial & Engineering Chemistry Research, Vol. 32, pp. 2305-17.
31. Paradossi, G., Cavalieri, F., Chiessi, E., Spagnoli, C. and Cowman, M.K. (2003), “Poly(vinyl alcohol) as versatile biomaterial for potential biomedical applications”, Journal of Materials Science: Materials in Medicine, Vol. 14 No. 8, pp. 687-691.
32. Persidis, A. (1999), “Tissue engineering”, Nature Biotechnology, Vol. 17 No. 5, pp. 508-510.
33. Rosenzweig, N. and Narkis, M. (1981), “Dimensional variations of two spherical polymeric particles during sintering”, Polymer Engineering & Science, Vol. 21 No. 10, pp. 582-5.
34. Sun, M.M. (1991), Physical Modeling of Selective Laser Sintering, PhD dissertation, The University of Texas, Austin, TX.
35. Sun, M.M. and Beaman, J.J. (1991), “A three dimensional model for selective laser sintering”, Proceedings of Solid Freeform Fabrication Symposium, The University of Texas, Austin, TX, 12-14 August, pp. 102-9.
36. Tan, K.H., Chua, C.K., Leong, K.F., Naing, M.W. and Cheah, C.M. (2005 a), “Fabrication and characterization of three-dimensional poly(ether-ether-ketone)/-hydroxyapatite biocomposite scaffolds using laser sintering”, Proceedings of the Institution of Mechanical Engineers Part – H: Journal of Engineering in Medicine, Vol. 219, H3, pp. 183-194.
37. Tan, K.H., Chua, C.K., Leong, K.F., Cheah, C.M., Gui, W.S., Tan, W.S. and Wiria, F.E. (2005 b), “Selective laser sintering of biocompatible polymers for applications in tissue engineering”, Bio-Medical Materials and Engineering, Vol. 15, pp. 113-124.
38. Thomson, R.C., Shung, A.K., Yaszemski, M.J. and Mikos, A.G. (2000), “Polymer scaffold processing”, in Ed. Lanza, R.P., Ed. Langer, R. and Ed. Vacanti, J. (Eds), Principles of Tissue Engineering, 2nd ed., Academic Press, San Diego, CA.
39. Tolochko, N.K., Laoui, T., Khlopkov, Y.V., Mozzharov, S.E., Titov, V.I. and Ignatiev, M.B. (2000), “Absorptance of powder materials suitable for laser sintering”, Rapid Prototyping Journal, Vol. 6 No. 3, pp. 155-160.
40. Vunjak-Novakovic, G. and Kaplan, D.L. (2006), “Tissue engineering: the next generation”, Tissue Engineering, Vol. 12 No. 12, pp. 3261-3.
41. Williams, J.M., Adewunmi, A., Schek, R.M., Flanagan, C.L., Krebsbach, P.H., Feinberg, S.E., Hollister, S.J. and Das, S. (2005), “Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering”, Biomaterials, Vol. 26 No. 23, pp. 4817-27.
42. Wiria, F.E., Leong, K.F., Chua, C.K. and Liu, Y. (2007), “Poly-e-caprolactone/hydroxyapatite for tissue engineering scaffold fabrication via selective laser sintering”, Acta Biomaterialia, Vol. 3 No. 1, pp. 1-12.
43. Yang, S.F., Leong, K.F., Du, Z.H. and Chua, C.K. (2001), “The design of scaffolds for use in tissue engineering. Part I. Traditional factors”, Tissue Engineering, Vol. 7, pp. 679-689.
44. Yang, S.F., Leong, K.F., Du, Z.H. and Chua, C.K. (2002), “The design of scaffolds for use in tissue engineering. Part II. Rapid prototyping techniques”, Tissue Engineering, Vol. 8 No. 1, pp. 1-11.
45. Yeong, W.Y., Chua, C.K., Leong, K.F. and Chandrasekaran, M. (2004), “Rapid prototyping in tissue engineering: challenges and potential”, Trends in Biotechnology, Vol. 22 No. 12, pp. 643-652.
46. Zhang, Y., Faghri, A., Buckley, C.W. and Bergman, T.L. (2000), “Three-dimensional sintering of two-component metal powders with stationary and moving laser beams”, Transactions of the ASME: Journal of Heat Transfer, Vol. 122, pp. 150-8.