Low temperature synthesis of conductive silver tracks with polymer addition

Journal of the Taiwan Institute of Chemical Engineers

Volumn 43, Issue 6, 2012, Pages 965-970

  Kao, Zhen Kai ^a   Chen, Shih Pin ^a   Lin, Jeng Lung ^a   Liao, Ying Chih ^a  

^a NATIONAL TAIWAN UNIVERSITY   (Taiwan)

Author keywords

Conductive tracks; Inkjet printing; PVP; Silver thin film

Indexed keywords

AMMONIUM CONCENTRATIONS; CONDUCTIVE TRACKS; ELECTRICAL CONDUCTIVITY; FILM FORMATIONS; FORMALDEHYDE SOLUTIONS; GLASS SLIDES; INK VISCOSITY; INKJET PRINTING PROCESS; LOW TEMPERATURE SYNTHESIS; POLYVINYL PYRROLIDONE; PRINTING PROCESS; PVP; ROOM TEMPERATURE; SILVER NANOPARTICLES; SILVER THIN FILMS;

AMMONIUM COMPOUNDS; ELECTRIC CONDUCTIVITY; FORMALDEHYDE; GLASS; LOW TEMPERATURE EFFECTS; NANOPARTICLES; PRINTING; SCANNING ELECTRON MICROSCOPY; SINTERING; THIN FILMS;

SILVER;

EID: 84870243542     PISSN: 18761070     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jtice.2012.05.003     Document Type: Article

References (35)

1. Jung H.C., Cho S.-H., Joung J.W., Oh Y.-S. Studies on inkjet-printed conducting lines for electronic devices. J Electron Mater 2007, 36(9):1211-1218.
2. Lee H., Chou K.-S., Huang K. Inkjet printing of nanosized silver colloids. Nanotechnology 2005, 16(10):2436-2441.
3. Perelaer B.J., de Laat A.W.M., Hendriks C.E., Schubert U.S. Inkjet-printed silver tracks: low temperature curing and thermal stability investigation. J Mater Chem 2008, 18(27):3209-3215.
4. Perelaer J., de Gans B.J., Schubert U.S. Ink-jet printing and microwave sintering of conductive silver tracks. Adv Mater 2006, 18(16):2101-2104.
5. Szczech J., Megaridis C.M., Gamota D., Zhang J. Fine-line conductor manufacturing using drop-on-demand PZT printing technology. IEEE Trans Electron Packag Manuf 2002, 25(1):26-33.
6. van Osch T.H.J., Perelaer J., de Laat A.W.M., Schubert U.S. Inkjet printing of narrow conductive tracks on untreated polymeric substrates. Adv Mater 2008, 20(2):343-345.
7. Calvert P. Inkjet printing for materials and devices. Chem Mater 2001, 13(10):3299-3305.
8. Tseng C.C., Lin Y.H., Shu Y.Y., Chen C.J., Ger M.D. Synthesis of vinyl acetate/Pd nanocomposites as activator ink for ink-jet printing technology and electroless copper plating. J Taiwan Inst Chem E 2011, 42(6):989-995.
9. Dearden A.L., Smith P.J., Shin D.-Y., Reis N., Derby B., Oapos B.P. A low curing temperature silver ink for use in ink-jet printing and subsequent production of conductive tracks. Macromol Rapid Commun 2005, 26(4):315-318.
10. Liu Z., Su Y., Varahramyan K. Inkjet-printed silver conductors using silver nitrate ink and their electrical contacts with conducting polymers. Thin Solid Films 2005, 478(1-2):275-279.
11. Perelaer J., Hendriks C.E., de Laat A.W.M., Schubert U.S. One-step inkjet printing of conductive silver tracks on polymer substrates. Nanotechnology 2009, 20(16):1-5.
12. Smith P.J., Shin D.Y., Stringer J.E., Derby B., Reis N. Direct ink-jet printing and low temperature conversion of conductive silver patterns. J Mater Sci 2006, 41(13):4153-4158.
13. Gamerith S., Klug A., Scheiber H., Scherf U., Moderegger E., List E.J.W. Direct ink-jet printing of Ag-Cu nanoparticle and Ag-precursor based electrodes for OFET applications. Adv Funct Mater 2007, 17(16):3111-3118.
14. Valeton J.J.P., Hermans K., Bastiaansen C.W.M., Broer D.J., Perelaer J., Schubert U.S., et al. Room temperature preparation of conductive silver features using spin-coating and inkjet printing. J Mater Chem 2010, 20(3):543-546.
15. 3/1-dimethylamino-2-propanol inks on polymer substrates. J Phys Chem C 2011, 115(22):10940-10945.
16. Perelaer J., Smith P.J., Mager D., Soltman D., Volkman S.K., Subramanian V., et al. Printed electronics: the challenges involved in printing devices, interconnects, and contacts based on inorganic materials. J Mater Chem 2010, 20(39):8446-8453.
17. Perelaer J., Klokkenburg M., Hendriks C.E., Schubert U.S. Microwave flash sintering of inkjet-printed silver tracks on polymer substrates. Adv Mater 2009, 21(47):4830-4834.
18. Kim T.-Y., Hwang J.-Y., Moon S.-J. Laser curing of the silver/copper nanoparticle ink via optical property measurement and calculation. Jpn J Appl Phys 2010, 49(5):1-6.
19. Reinhold I., Hendriks C.E., Eckardt R., Kranenburg J.M., Perelaer J., Baumann R.R., et al. Argon plasma sintering of inkjet printed silver tracks on polymer substrates. J Mater Chem 2009, 19(21):3384-3388.
20. Kao Z.-K., Hung Y.-H., Liao Y.-C. Formation of conductive silver films via inkjet reaction system. J Mater Chem 2011, 21(46):18799-18803.
21. Smalley R.E., O'Connell M.J., Boul P., Ericson L.M., Huffman C., Wang Y.H., Haroz E., Kuper C., Tour J., Ausman K.D. Reversible water-solubilization of single-walled carbon nanotubes by polymer wrapping. Chem. Phys. Lett. 2001, 342(3-4):265-271.
22. Zhang Z.T., Zhao B., Hu L.M. PVP protective mechanism of ultrafine silver powder synthesized by chemical reduction processes. J Solid State Chem 1996, 121(1):105-110.
23. Zheng M.P., Gu M.Y., Jin Y.P., Jin G.L. Optical properties of silver-dispersed PVP thin film. Mater Res Bull 2001, 36(5-6):853-859.
24. Xia Y.N., Sun Y.G. Shape-controlled synthesis of gold and silver nanoparticles. Science 2002, 298(5601):2176-2179.
25. Hsu S.L.C., Wu R.T. Synthesis of contamination-free silver nanoparticle suspensions for micro-interconnects. Mater Lett 2007, 61(17):3719-3722.
26. Chou K.S., Lee H.H., Huang K.C. Inkjet printing of nanosized silver colloids. Nanotechnology 2005, 16(10):2436-2441.
27. Lu Y.C., Chou K.S. A simple and effective route for the synthesis of nano-silver colloidal dispersions. J Chin Inst Chem Eng 2008, 39(6):673-678.
28. Wiley B., Sun Y.G., Mayers B., Xia Y.N. Shape-controlled synthesis of metal nanostructures: the case of silver. Chem-Eur J 2005, 11(2):454-463.
29. Hsu S.L.C., Wu J.T., Tsai M.H., Hwang W.S. Direct inkjet printing of silver nitrate/poly(n-vinyl-2-pyrrolidone) inks to fabricate silver conductive lines. J Phys Chem C 2010, 114(10):4659-4662.
30. Hwang D.K., Park J.H., Lee J., Choi J.M., Kim J.H., Kim E., et al. Improving resistance to gate bias stress in pentacene TFTS with optimally cured polymer dielectric layers. J Electrochem Soc 2006, 153(1):G23-G26.
31. Yam V.W.W., Yu D.B. Hydrothermal-induced assembly of colloidal silver spheres into various nanoparticles on the basis of HTAB-modified silver mirror reaction. J Phys Chem B 2005, 109(12):5497-5503.
32. Huang F.Q., Shan Z.C., Wu J.J., Xu F.F., Ding H.M. Highly effective silver/semiconductor photocatalytic composites prepared by a silver mirror reaction. J Phys Chem C 2008, 112(39):15423-15428.
33. Duineveld P.C. The stability of ink-jet printed lines of liquid with zero receding contact angle on a homogeneous substrate. J Fluid Mech 2003, 477175-477200.
34. Stringer J., Derby B. Formation and stability of lines produced by inkjet printing. Langmuir 2010, 26(12):10365-10372.
35. Khanna P.K., Singh N., Charan S., Subbarao V.V.V.S., Gokhale R., Mulik U.P. Synthesis and characterization of Ag/PVA nanocomposite by chemical reduction method. Mater Chem Phys 2005, 93(1):117-121.