Enhanced pool boiling performance on micro-, Nano-, and hybrid-structured surfaces

ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011

Volumn 10, Issue PARTS A AND B, 2011, Pages 633-640

  Li, Qian ^a   Wang, Wei ^a   Oshman, Chris ^a   Latour, Benoit ^b   Li, Chen ^c   Bright, Victor M ^a   Lee, Yung Cheng ^a   Yang, Ronggui ^a  

^a UCB 450   (United States)

^b ECOLE CENTRALE PARIS   (France)

^c University of South Carolina   (United States)

Author keywords

Critical heat flux; Heat transfer coefficient; Hybrid micro nano structures; Micro pillars; Nanowires; Nucleate boiling; Pool boiling

Indexed keywords

ENERGY CONVERSION; HEAT TRANSFER COEFFICIENTS; HEAT TRANSFER PERFORMANCE; NANOWIRES; NUCLEATE BOILING; TEMPERATURE CONTROL;

CRITICAL HEAT FLUX(CHF); ENERGY CONVERSION SYSTEMS; FUNCTIONAL COMPONENTS; HIGH POWER ELECTRONICS; HYBRID MICRO/NANO-STRUCTURES; MICRO PILLARS; POOL BOILING; POOL BOILING HEAT TRANSFER;

HEAT FLUX;

EID: 84869192704     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/imece2011-64921     Document Type: Conference Paper

References (31)

1. Kang, M. G., 1998, "Experimental Investigation of Tube Length Effect on Nucleate Pool Boiling Heat Transfer", Annals of Nuclear Energy, 25(4-5), pp. 295-304.
2. Thome, J. R., 1990, Enhanced Boiling Heat Transfer, Hemisphere, New York, USA.
3. Mudawar, I., 2001, "Assessment of High-Heat-Flux Thermal Management Schemes", IEEE Trans. Components and Packaging Technologies, 24(2), pp. 122-141.
4. Pioro, I. L., Rohsenow, W., Doerffer, S., 2004, "Nucleate Pool-Boiling Heat Transfer-I. Review of Parametric Effects of Boiling Surface", International Journal of Heat and Mass Transfer, 47(23), pp. 5033-5044.
5. Hwang, U. P. and Moran, K. F., 1981, "Boiling Heat Transfer of Silicon Integrated Circuits Chip Mounted on a Substrate", A82-28977 13-31, Heat Transfer in Electronic Euqipment, Proceedings of the Winter Annual Meeting, American Society of Mechanical Engineers, ASME HTD, New York, 20, pp.53-59.
6. Nakayama, W., Nakajima T., and Hirasawa, S., 1984, "Heat Sink Studies Having Enhanced Boiling Surfaces for Cooling Microelectronic Components", ASME Paper, No. 84-WA/HT-89.
7. Miller, W. J., Gebhart, B., and Wright, N. T., 1990, "Effects of Boiling Histroy on a Micro-configured Surface in a Dielectric Liquid", International Communications in Heat and Mass Transfer, 17(4), pp.389-398.
8. Kubo, H., Takamatsu, H., and Honda, H., 1999, "Effects of Size and Number Density of Micro-reentrant Cavities on Boiling Heat Transfer from a Silicon Chip Immersed in Degassed and Gas-dissolved FC-72", Journal of Enhanced Heat Transfer, 6(4-6), pp.151-160.
9. Anderson, T. M. and Mudawar, I., 1989, "Microelectronic Cooling by Enhanced Pool Boiling of a Dielectric Fluorocarbon Liquid", ASME Journal of Heat Transfer, 111 (3), pp.752-759.
10. Honda, H., Takamatsu, H., Wei, J. J., 2002, "Boiling of FC-72 on Silicon Chips with Micro-pin-fins and Submicron-scale Roughness", Trans. ASME Journal of Heat Transfer, 124(2), pp.383-390.
11. Carvalho, R. D., and Bergles, A. E., 1990, "The Influence of Subcooling on the Pool Nucleate Boiling and Critical Heat Flux of Simulated Electronic Chips", Proc. 9th International Heat Transfer Conference, Hemisphere, New York, 2, pp.289-294.
12. Min, D. H., Hwang, G. S., Usta, Y., Cora, O. N., Koc, M., and Kaviany, M., 2009, "2-D and 3-D Modulated Porous Coatings for Enhanced Pool Boiling", International Journal of Heat and Mass Transfer, 52(11-12), pp.2607-2613.
13. Cora, O.N., Min, D., Koc, M., and Kaviany, M., 2010, "Microscale- Modulated Porous Coatings: Fabrication and Pool-boiling Heat Transfer Performance", Journal of Micromechanics and Microengineering, 20(3), pp.035020.
14. Semenic, T., Lin, Y. Y., Catton, I., and Sarraf, D. B., 2008, "Use of Biporous Wicks to Remove High Heat Fluxes", Applied Thermal Engineering, 28(4), pp.278-283.
15. Mori, S. and Okuyama, K., 2009, "Enhancement of The Critical Heat Flux in Saturated Pool Boiling using Honeycomb Porous Media", International Journal of Multiphase Flow, 35(10), pp.946-951.
16. Kim, J.W. and Kim, C. J., 2002, "Nanostructured Surfaces for Dramatic Reduction of Flow Resistance in Droplet-Based Microfluidics", Technical Digest, IEEE MEMS Conf: Las Vegas, N V, pp.479-482.
17. Cao, B.Y., Chen, M., and Guo, Z.Y., 2006, "Liquid Flow in Surface-nanostructured Channels Studied by Molecular Dynamics Simulation", Physical Review E, 74(6), pp.066311.
18. Nagayama, G., Sibuya, S., Kawagoe, M., and Tsuruta, T., 2007, "Heat Transfer Enhancement at Nanostructured Surface in Parallel-plate Microchannel", Challenges of Power Engineering and Environment, Springer Berlin Heidelberg, pp. 999-1006.
19. Li, C., Wang, Z., Wang, P. I., Peles, Y., Koratkar, N., Peterson, G. P., 2008, "Nanostructured Copper Interfaces for Enhanced Boiling", Small, 4(8), pp.1084-1088.
20. Chen, R., Lu, M. C., Srinivasan, V., Wang, Z. J., Cho, H. H., and Majumdar, A., 2009, "Nanowires for Enhanced Boiling Heat Transfer", Nano Letters, 9(2), pp. 548-553.
21. El-Genk, M.S. and Ali, A.F., 2010, "Enhancement of Saturation Boiling of PF-5060 on Micro porous Copper Dendrite Surfaces", Journal of Heat Transfer, 132(7), pp.071501.
22. El-Genk, M.S. and Ali, A.F., 2010, "Enhanced Nucleate Boiling on Copper Micro-Porous Surfaces", International Journal of Multphase Flow, 36(10), pp.780-792.
23. Wang, C. H., Dhir, V. K., 1993, "Effect of Surface Wettability on Active Nucleation Site Density During Pool Boiling of Water on a Vertical Surface", Journal of Heat Transfer, 115(3), pp.659-669.
24. Dhir, V.K., Liaw, S.P., 1989, "Framework for a Unified Model for Nucleate and Transition Pool Boiling", Journal Heat Transfer, 111(3), pp.739-746.
25. Li, C, Peterson, G.P., 2007, "Parametric Study of Pool Boiling on Horizontal Highly Conductive Microporous Coated Surfaces", Journal of Heat Transfer, 129(11), pp.1465-1475.
26. Zuber, N., 1959, "Hydrodynamic Aspects of Boiling Heat Transfer",AECU-4439, Physics and mathematics, US ATOMIC ENERGY COMMISSION.
27. Hsieh, C.C., Yao, S.C., 2006, "Evaporative Heat Transfer Characteristics of a Water Spray on Micro-Structured Silicon Surfaces", International Journal of Heat and Mass Transfer, 49(5-6), pp.962-974.
28. Liter, S.G., Kaviany, M., 2001, "Pool-boiling CHF Enhancement by Modulated Porous-layer Coating: Theory and Experiment", International Journal of Heat and Mass Transfer, 44, pp.4287-4311.
29. Hsu, Y.Y., 1962, "On the Size Range of Active Nucleate Cavities on a Heating Surface", Journal of Heat Transfer, 84(3), pp.207-216.
30. Kim, S., Kim, H.D., Ahn, H.S., Jo, H., Kim, J., Kim, M.H., 2009, "Effects of Nano-Fluid and Surfaces with Nano Structure on the Increase of CHF", Experimental Thermal and Fluid Science, 34, pp. 487-495.
31. Cai, Q., Chen, C.L., 2010, "Design and Test of Carbon Nanotube Biwick Structure for High-Heat-Flux Phase Change Heat Transfer", Journal of Heat Transfer, 132(5), pp.052403-1.